Database Users

How to flash Huawei Y300 with official rom

Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards

Hi,
same method as old models :
Check phone version / exact sub-model, here are three hardware versions of Y300:
1.Huawei Y300 (T8833) - TD-SCDMA / China Mobile
2.Huawei Y300-0000 (U8833) - WCDMA China Unicom
3.Huawei Y300-0100 (U8833) - WCDMA International
check version (product ID) with this code : *#*#1357946#*#* , dial button (green)
there is international version ROM - Y300-0100 at Huawei site, you probably downloaded it ...
- put "dload" folder from archive on formatted micro-sd card's ROOT
- put micro-sd card into phone
- start phone in download mode = Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode
(taken from upgrade manual - which is found in archive, pdf ... )
- wait for finish ...
p.s. if not accepting firmware - means it's not international version ....
b.r.
Alex

If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.

what is the latest firmware update for Huawei y300
what is the latest firmware update for Huawei y300? i have the software versio V100R001C151B165 is this the latest update?
please update

i backed up my imei but deleted the folder i try to backup again and it says its already backed up ??

How to restore Imei
I didn't understood woht ot restore my imei. Could you explain it completely?

HUAWEII Y300-0000 question
Hi,
I have HUAWEII Y300-0000 phone I've bought in china.
Managed to unlock it thanks to your manual.
It comes with ROM: Y300-0000V100R00C17B180 (Android 4.1.1).
The only problem I have is that sometimes when I try to dial I do not manage to establish call (the call is tried to be established and then disconnects). When this happens there is also problem in incoming calls. I manage to receive the incoming call but when answered the connection drops after several seconds.
My question is whether this is an issue you are familiar with.
If so, do you have any suggestions?
Are there any new ROMs for this version that maybe handle these kind of issues.
How can I install new ROM on already rooted phone?
Thanks in advance

tamirgz said:
Hi,
I have HUAWEII Y300-0000 phone I've bought in china....
Click to expand...
Click to collapse
Have the same problem - could I instal there soft for Y300-0100 after unlock bootloader?

Can you tell me how do I "zero" the Y300 IMEI? I have one that was left without system and now I can't flash the
HUAWEI_Y300_firmware(Y300-0100,Android 4.1,Emotion_UI,V100R001C00B175,Normal,05011FKA)
Now I can't revive my Huawei?
Thanks
OmenHTX said:
If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.
Click to expand...
Click to collapse

I tried the official one but the performance is very low:crying::crying::crying::crying:

Ram Expander on Huawei Asend Y300
I rooted my phone it works properly. Everything working fine. I just have have one problem that how to expand its ram. Plz tell me.
I tried with 2gb class 6 card with swalpt expander but it show nothing in it.

Huawei Y300 Ram Expander
Plz tell me how to expand ram of Huawei Ascend Y300.

babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
hi there, i believe you can only flash the official firmware upgrades from a official ROM because when you check for upgrades to the firmware it gives you a option to install from local storage which i have yet to see in a custom ROM. in future i would always recommend a backup before installing any other ROM

hey someone flashed the official rom successfully?

zeroing imei
can you write how to zero imei code

flashing huawei y300. if you can upload any ctock or custom ro who i can install in
mobilexpert said:
Hi,
same method as old models :
Check phone version / exact sub-model, here are three hardware versions of Y300:
1.Huawei Y300 (T8833) - TD-SCDMA / China Mobile
2.Huawei Y300-0000 (U8833) - WCDMA China Unicom
3.Huawei Y300-0100 (U8833) - WCDMA International
check version (product ID) with this code : *#*#1357946#*#* , dial button (green)
there is international version ROM - Y300-0100 at Huawei site, you probably downloaded it ...
- put "dload" folder from archive on formatted micro-sd card's ROOT
- put micro-sd card into phone
- start phone in download mode = Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode
(taken from upgrade manual - which is found in archive, pdf ... )
- wait for finish ...
p.s. if not accepting firmware - means it's not international version ....
b.r.
Alex
Click to expand...
Click to collapse
if you can upload any custom or stock rom who i can install in stock recowery for huawei y300(recowery name is .android system recowery<3e>

huawei y300 flashing
OmenHTX said:
If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.
Click to expand...
Click to collapse
how to get or hack bootloader code if my phone is bricked.
or
if you can upload any custom or stock rom to install in stock recowery(i can go to recowery and i can force upgrade but fails at step 2/2).
recowery name is ''android system recowery <3e>''.
or if i can instal any custom recowery now i install rom trought this custom recowery.
WRITE ANY OPTION TO WAKE UP MY PHONE.

falshing huawei y 300
babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
i install chainfire 3d and when i instaling driver my phone is shut down and i can wake up him from that it only show huawei ascend logo i can go to stock recowery and i can force upgrade but fail at ste 2 can you fix it

Unlockin Huawei Y300
babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=BBliIomdLOI
You can unllock bootloader like this see on video
Sigma-key app

Ateeq Rana said:
Plz tell me how to expand ram of Huawei Ascend Y300.
Click to expand...
Click to collapse
Search playstore I forget the excat name of the app. I used swapit(the name has changed now I forget the name) this uses your sd card as ram but do take note that the more u use your sd card the quicker it can go bad.

Still stuck on software version B133

Hi Guys
I want to install Marshmallow on my Huawei P8 Lite (Single Sim). I need to have B171 installed to update.
However, I am still stuck on B133. When I try to get an update over the air, it says that I already have the latest software installed. First, I tried to do this with the updater. Then, I used HiSuite. They both give the same message: no update available.
Next, I tried to update manually, by using the update that I found via xdadevelopers (http : // www . carbontesla . com/2015/11/huawei-p8-lite-b171-android-5-0-lollipop-firmware/) but it fails to update after 15%.
Finally, I tried all of the above after a factory reset, but nothing worked.
Is there something else I can do?
Thanks in advance!

Look at your phone settings, then about the phone and look at the build number and model number, what values do you have there?

olrak said:
Look at your phone settings, then about the phone and look at the build number and model number, what values do you have there?
Click to expand...
Click to collapse
Build number: ALE-L21C432B133
Model Number: ALE-L21

You don't have the balong bug error. So try reverting to build B052, then you can maybe updated to B188
Instructions on how to downgrade you can find here
Step 2 you don't need to do and Step 3 and 4 you can do OTA with the huawei updater.

Follow instructions mentioned in below topic , then you will be on latest android 6.0
http://forum.xda-developers.com/p8lite/general/huawei-p8-lite-android-6-0-marshmallow-t3309796

Thank you for your answers.

All right folks!
If you encounter this problem as well on your device, do what Olrak and ettenleurtje have told in this thread. Downgrade to B052, then do an OTA upgrade to B170, followed by an OTA upgrade to B188. Then you have the latest OTA update, so you might decide to stop here. However, if you really want the Marshmallow Beta version, do the latest step in their guides as well.
Thank you both for helping me.

Nova plus MLA L11 update failed

please help me.
i just update nova plus MLA L11c185b151 middle east version
via Firmware finder .
Mobile update download completed and asked for reboot.
after reboot update started but failed at 57%
i tried online recovery by huawei but failed also. cannot find server
please help me

solved ,
i tried all different roms.
b332 and 341 342 finally b341 worked for me.
but its test build
how i can get stable rom

kais.pk said:
solved ,
i tried all different roms.
b332 and 341 342 finally b341 worked for me.
but its test build
how i can get stable rom
Click to expand...
Click to collapse
same problem but mine is stuck at 5% and when i try to flash any firmware it fails on 5 % did you got any solution?

I had the same problem.
1. DC-Phoenix
2. Download MLA-L11_C185B131CUSTC185D001 Full Firmware 3,77GB
Flash it and will boot.
BTW, cant update to nougat. Dont know why.

How please help me
JoelEstrela said:
I had the same problem.
1. DC-Phoenix
2. Download MLA-L11_C185B131CUSTC185D001 Full Firmware 3,77GB
Flash it and will boot.
BTW, cant update to nougat. Dont know why.
Click to expand...
Click to collapse
How did you flash it?

S7 OREO : FOR JIO USERS IN INDIA, who know rooting.. jio VOLTE ALSO CAN BE ACTIVATED

1. Flash any one of this firmware with odin 3.12.7 ( For S7 Flat (G930F)
https://de.s2.samsungbay.com/8774/BTU-G930FXXS2DRC3-20180402085751.zip
https://ru.s1.samsungbay.com/087f/BTU-G930FXXS2DRC3-20180402085751.zip
(For S7 Edge (G935F)
https://de.s2.samsungbay.com/f253/BTU-G935FXXS2DRC3-20180330111551.zip
https://ru.s1.samsungbay.com/ff57/BTU-G935FXXS2DRC3-20180330111551.zip )
2. This will prompt 1.2gb ota update for oreo. install it and reboot
Half done. you will get 8.0. To get volte, do the following...
3. FLASH TWRP RECOVERY twrp-3.1.1-0-herolte as usual
4. Enter twrp recovery.. enter wipe . click format data. type yes (caution: this will remove all your data. take a backup before doing this)
5. Flash CSC from this link -> https://www.dropbox.com/s/gma7ya7rux2nq4o/csc_s7_oreo[1].zip?dl=0
Reboot!

any work around for non rooted user

lilliput222 said:
any work around for non rooted user
Click to expand...
Click to collapse
Flash BTU oreo then download the latest INS firmware and flash the home_csc using odin

anthonys4 said:
Flash BTU oreo then download the latest INS firmware and flash the home_csc using odin
Click to expand...
Click to collapse
Will we have jio volte support in built in oreo when we recieve official update in india ??

sharingan said:
Will we have jio volte support in built in oreo when we recieve official update in india ??
Click to expand...
Click to collapse
Yes

Gopinath15 said:
1. Flash any one of this firmware with odin 3.12.7 ( For S7 Flat (G930F)
https://de.s2.samsungbay.com/8774/BTU-G930FXXS2DRC3-20180402085751.zip
https://ru.s1.samsungbay.com/087f/BTU-G930FXXS2DRC3-20180402085751.zip
(For S7 Edge (G935F)
https://de.s2.samsungbay.com/f253/BTU-G935FXXS2DRC3-20180330111551.zip
https://ru.s1.samsungbay.com/ff57/BTU-G935FXXS2DRC3-20180330111551.zip )
2. This will prompt 1.2gb ota update for oreo. install it and reboot
Half done. you will get 8.0. To get volte, do the following...
3. FLASH TWRP RECOVERY twrp-3.1.1-0-herolte as usual
4. Enter twrp recovery.. enter wipe . click format data. type yes (caution: this will remove all your data. take a backup before doing this)
5. Flash CSC from this link -> https://www.dropbox.com/s/gma7ya7rux2nq4o/csc_s7_oreo[1].zip?dl=0
Reboot!
Click to expand...
Click to collapse
Has anybody tried this Rom and the options to get Volte working for Jio users?
Waiting for reply.
Thanks am in advance.

fahim38 said:
Has anybody tried this Rom and the options to get Volte working for Jio users?
Waiting for reply.
Thanks am in advance.
Click to expand...
Click to collapse
I use a custom rom with multi csc option. Jio works fine

fahim38 said:
Has anybody tried this Rom and the options to get Volte working for Jio users?
Waiting for reply.
Thanks am in advance.
Click to expand...
Click to collapse
I am using it myself without issues

devilhunter47 said:
I use a custom rom with multi csc option. Jio works fine
Click to expand...
Click to collapse
Custom rom based on touchwiz right

Gopinath15 said:
I am using it myself without issues
Click to expand...
Click to collapse
R u using the Rom mentioned in this post and the procedure to get Oreo on S7 flat and Volte for Jio ?

Dear OP,
I am unable to download the rom file for S7 Flat. Any other source for me to download.

fahim38 said:
R u using the Rom mentioned in this post and the procedure to get Oreo on S7 flat and Volte for Jio ?
Click to expand...
Click to collapse
Yes. Oreo is not yet released in India. I have flashed the UK version, which I have provided in original post and flashed India CSC. JioVolte works perfectly.

Gopinath15 said:
Yes. Oreo is not yet released in India. I have flashed the UK version, which I have provided in original post and flashed India CSC. JioVolte works perfectly.
Click to expand...
Click to collapse
I not able to download the Rom from both the links for S7 flat.
Plz help.

Was able to flash this zip over s7 edge oreo G935U and JIO is working. Thank you.

mreddy7 said:
Was able to flash this zip over s7 edge oreo G935U and JIO is working. Thank you.
Click to expand...
Click to collapse
If anyone is looking for Volte on USA snapdragon version, Without rooting, check https://forum.xda-developers.com/s7-edge/how-to/how-to-volte-jio-spay-india-usa-t3663530

Today i installed BTU Firmware (G930FXXS3ERHD) in my G930FD (G930FXXU2ERGE) bcoz to battery drain issue but after flashed volte has gone. I tried to flash CSC file but no success, i got error in odin "sw rev check fail device 3 binary 2 " than i trying to re flash G930FXXU2ERGE in my G930FD but got same error every time. I cant go back from G930FXXS3ERHD to G930FXXU2ERGE. Can anyone have solution of this problem. Non Rooted method.

kapilrtn said:
Today i installed BTU Firmware (G930FXXS3ERHD) in my G930FD (G930FXXU2ERGE) bcoz to battery drain issue but after flashed volte has gone. I tried to flash CSC file but no success, i got error in odin "sw rev check fail device 3 binary 2 " than i trying to re flash G930FXXU2ERGE in my G930FD but got same error every time. I cant go back from G930FXXS3ERHD to G930FXXU2ERGE. Can anyone have solution of this problem. Non Rooted method.
Click to expand...
Click to collapse
You can only flash bootloader 3 version files (4th number from right in the version number)
Just sideload the Indian CSC as shown in the link just above your post. (Should work with exynos too)

Upgrade from B160 to Nougat

Hey Guys, Yes, I Know, there exists already some threads about that problem, but often there are not accurately so I ask you again.
I have a VNS-L31 Dual Sim, bought in Germany without Brand, and I had Resurection Remix installed. I had some Problems with SafetyNet and so on so I decided to switch to the Stock Rom. After some Problems with the data partition (witch I forgot to format), I have now a working OS, flashed with DLoad Method.
Build Number: VNS-L31C432B160
Locked Bootloader, stock Recovery
The Problem is, that this OS does not recieve any updates, and it would be perfect to have nougat on this one. I tryd Firmware Finder already, but after try to upgrade to B370, the Upgrader said "failed to check the upgrade files. Please download once again.". It was a Full OTA Upgrade. Other Versions result into the same or simmilar failures like compatibility issues.
Do you have a Idea how to fix that?
I'm sorry for my bad english
Have a nice day

Linux and Android Expert said:
Hey Guys, Yes, I Know, there exists already some threads about that problem, but often there are not accurately so I ask you again.
I have a VNS-L31 Dual Sim, bought in Germany without Brand, and I had Resurection Remix installed. I had some Problems with SafetyNet and so on so I decided to switch to the Stock Rom. After some Problems with the data partition (witch I forgot to format), I have now a working OS, flashed with DLoad Method.
Build Number: VNS-L31C432B160
Locked Bootloader, stock Recovery
The Problem is, that this OS does not recieve any updates, and it would be perfect to have nougat on this one. I tryd Firmware Finder already, but after try to upgrade to B370, the Upgrader said "failed to check the upgrade files. Please download once again.". It was a Full OTA Upgrade. Other Versions result into the same or simmilar failures like compatibility issues.
Do you have a Idea how to fix that?
I'm sorry for my bad english
Have a nice day
Click to expand...
Click to collapse
Hello,
try again using dns/vpn method and choosing
B370 FULLOTA-MF-PV.
Searching whit FF i see a couple of this version, try them both...
and good luck...
Cheers