Updated 10/22/2014 10:20pm EST - Thread closed see new thread http://forum.xda-developers.com/galaxy-tab-pro-12-10-8/general/cyanogenmod-tab-pro-12-2-sm-t900-t2914991
chhaggerty has now posted his source built cm11 for SM-T900 that has a full OP, why this post no longer is needed. Additionally, his build is the most complete and also runs smoother than its predecessors. However, without the initial work carried out by crpalmer, Valera1978 and bonuzzz this release would not have seen the light until much later, if ever.
I know this is not the correct place for this info, but the original thread is very, let's call it, chaotic. The OP is not maintained (do not flash .zip-files available in the OP), and it's very hard to find details unless you participated from the start and followed the development. Further, I believe this is of public interest for the community members, as the T-900 has not seen much development until now.
Tired of your laggy base ROM?
Valera1978 and bonuzzz from the P-900 forum has successfully ported crpalmer's cm-11 T-520 picassowifi to the SM-T900. The cm-11 ROM is very snappy and responsive, there is no reason not using it as a daily driver. Before flashing it's recommended to update to TWRP 2.8.0.0, see my note for details
Attention: This is a non-stock based ROM, why you also need to install gapps (set of packages - full, mini, micro, nano, pico). I prefer the Pico in order to be in control of the maximum of what is installed, but that's up to you.
Finally: Don't forget to make a backup of the ROM you currently have installed.
Do you want to try but are afraid to make the change? bonuzzz has released MultiROM for T-900. This will allow keeping your TouchWiz ROM, and concurrently install cm11. You can then, seamlessly, go back and forth between the two alternatives.
Alternatively, you can also try it the traditional way. However, some people had issues in going back to StockROM after having tried cm11, but after flashing bonuzzz's MultiROM kernel on the top of the TouchWiz ROM, it boots up immediately and radically improve the performance, isn't that a bonuzzz.
For the cm11, there might be some minor, non-verified, remaining issue(s);
- auto-rotation - screen orientation is always presented in landscape mode, independent of settings. However you can use an app, eg Ultimate Rotation Control, to lock the screen in any direction.
- IR blaster - I used IR 2.0 and had no issues with TouchWiz, but no reaction with cm11
I will try keeping a POST up to date with latest developments
- LED notification lights - don't look for it, functionality is not supported by the device
- Proximity sensor - don't look for it, according to Samsung's specs the device does not have one
Details of what has been fully tested can be found HERE
Valera1978 said:
cm-11-20141012-UNOFFICIAL-v2wifi
Merge with latest official nigtly 20141012.
Also included new kernel.
https://drive.google.com/file/d/0B-6...ew?usp=sharing
Please test it.
Click to expand...
Click to collapse
Note: the BROWN text contain links to the actual postings
Need help installing the rom
arcadia2uk said:
Updated 10/18/2014 08:40am EST
I know this is not the correct place for this info, but the original thread is very, let's call it, chaotic. The OP is not maintained (do not flash .zip-files available in the OP), and it's very hard to find details unless you participated from the start and followed the development. Further, I believe this is of public interest for the community members, as the T-900 has not seen much development until now.
Tired of your laggy base ROM?
Valeria1978 and Bonuzzz from the P-900 forum has successfully ported crpalmer's cm-11 T-520 picassowifi to the SM-T900. The cm-11 ROM is very snappy and responsive, there is no reason not using it as a daily driver. Before flashing it's recommended to update to TWRP 2.8.0.0, see my note for details
Attention: This is a non-stock based ROM, why you also need to install gapps (set of packages - full, mini, micro, nano, pico). I prefer the Pico in order to be in control of the maximum of what is installed, but that's up to you.
Finally: Don't forget to make a backup of the ROM you currently have installed.
Do you want to try but are afraid to make the change? Bonuzzz has released MultiROM for T-900. This will allow keeping your TouchWiz ROM, and concurrently install cm11. You can then, seamlessly, go back and forth between the two alternatives.
Alternatively, you can also try it the traditional way. However, some people had issues in going back to StockROM after having tried cm11, but after flashing Bonuzzz's MultiROM kernel on the top of the TouchWiz ROM, it boots up immediately and radically improve the performance, isn't that a Bonuzzz.
For the cm11, there might be some minor, non-verified, remaining issue(s);
- auto-rotation - screen orientation is always presented in landscape mode, independent of settings. However you can use an app, eg Ultimate Rotation Control, to lock the screen in any direction.
- IR blaster - I used IR 2.0 and had no issues with TouchWiz, but no reaction with cm11
I will try keeping a POST up to date with latest developments
- LED notification lights - don't look for it, functionality is not supported by the device
- Proximity sensor - don't look for it, according to Samsung's specs the device does not have one
Details of what has been fully tested can be found HERE
Note: the BROWN text contain links to the actual postings
Click to expand...
Click to collapse
Hello,
I tried to install your rom but it gave me an error. I installed twrp 2.8 and then I flashed the cm11 rom. See attached picture for the error.
I am very new in flashing stuff so I hope someone can help me and tell me what to do.
Many thanks.
Deslang16 said:
Hello,
I tried to install your rom but it gave me an error. I installed twrp 2.8 and then I flashed the cm11 rom. See attached picture for the error.
I am very new in flashing stuff so I hope someone can help me and tell me what to do.
Many thanks.
Click to expand...
Click to collapse
I hope that you started by making a backup of your current ROM. Thereafter, I assume you did a factory reset, and also wiped your system.
However, It looks like you are installing gapps before the ROM, it should be the other way around. First ROM, then gapps.
Hi Guys, I found a new rom for Falcon (XT1032, 1033 and GPE devices) (I found it surfing on AFH)
***I'm not the Dev.*** all the credits to TipsyOs dev "Martin Coulon (Martinusbe)"
Here are some features:
AdAway
AudioFX
FMRadio
RRO Layers
Navigation Bar Settings
SlimPIE
App Circle Sidebar
SuperSU
So on.
Custom Kernel Features:
Underclock to 96Mhz
GPU Overclock to 533 Mhz (+ Simple GPU Algorithm)
IntelliPlug (Touch Boost)
MSM MPDecision Hotplug
MPDecision Hotplug
DoubleTap2Wake & Sweep2Wake
Download:
https://www.androidfilehost.com/?w=files&flid=34813
*Works on XT1033 and GPE devices.
The rom is very smooth and fast.
Credits:
Martin Coulon (Martinusbe)
TipsyOs Team
Community+
https://plus.google.com/wm/trollfac...3/stream/d66461ba-71ae-46fd-aaa9-0e80458f0583
@op its 100% works on xt1033 and gpe devices
moha07 said:
@op its 100% works on xt1033 and gpe devices
Click to expand...
Click to collapse
Thank you :good:
is it compatible with xposed?
sfoot13 said:
Hi Guys, I found a new rom for Falcon (XT1032, 1033 and GPE devices) (I found it surfing on AFH)
***I'm not the Dev.*** all the credits to TipsyOs dev "Martin Coulon (Martinusbe)"
Here are some features:
AdAway
AudioFX
FMRadio
RRO Layers
Navigation Bar Settings
SlimPIE
App Circle Sidebar
SuperSU
So on.
Custom Kernel Features:
Underclock to 96Mhz
GPU Overclock to 533 Mhz (+ Simple GPU Algorithm)
IntelliPlug (Touch Boost)
MSM MPDecision Hotplug
MPDecision Hotplug
DoubleTap2Wake & Sweep2Wake
Download:
https://www.androidfilehost.com/?w=files&flid=34813
*Works on XT1033 and GPE devices.
The rom is very smooth and fast.
Credits:
Martin Coulon (Martinusbe)
TipsyOs Team
Community+
https://plus.google.com/wm/trollfac...3/stream/d66461ba-71ae-46fd-aaa9-0e80458f0583
Click to expand...
Click to collapse
Can you please inform me
1. possible to flash this rom on my xt1032/2013 converted to gpe 5.1(now i am runing on SlimSaber 08/08/15)? flashing and gapps infos?
2. OTG function works as i am very intersting about this like you?
3. on every rom you are runing now on your moto g independed of type,can you sent the exported file using the mount command in adb shell, a file like mine attached,just to see in what fs your rom is made? (As it so easy none help me about this still wondering why).
NOTE 1 : in twrp pict. seems the problem i met trying to flash cm based roms like: blisspop/liquid smooth/aosp/resurrection remix and many others, EXCEPT SlimSaber and Mokee
Hopping for an answer,Have a nice day
EDIT 1 :ALL OK, FLASHED OK ON MY DEVICE, but one bug i found atm : when powered off during charge the phone rebooted against battery showing, minimal gapps used.The rom is very fast/smooth/OTG OK, may be the r38 optimus must be flashed(my next step)/the dt2w & Sweep2Wake not founded yet but notice the ukm not flashed yet, any suggestion on these?is going to work or not?
EDIT: 2 the dt2w ok after ukm flashed and synapse loaded and some adjustments made(i use interactive gov atm and cores in aggresive mode), Sweep2Wake in navbar not works on any of 2 options. One more bug? when bt headset connected after some time ,i dont remember exactly trying to turn screen on by power button the screen was freezed and needs to reboot the phone to work ok (this happen before UKM zip flashed and synapse app loaded).
NOTE 2 : the other asks remaining(about the file) ,the tread must be continoued and more work needed IMHO.
Congts very good work. go ahead,TNX!!! A LOT @sfoot13
granazis said:
Can you please inform me
1. possible to flash this rom on my xt1032/2013 converted to gpe 5.1(now i am runing on SlimSaber 08/08/15)? flashing and gapps infos?
2. OTG function works as i am very intersting about this like you?
3. on every rom you are runing now on your moto g independed of type,can you sent the exported file using the mount command in adb shell, a file like mine attached,just to see in what fs your rom is made? (As it so easy none help me about this still wondering why).
NOTE 1 : in twrp pict. seems the problem i met trying to flash cm based roms like: blisspop/liquid smooth/aosp/resurrection remix and many others, EXCEPT SlimSaber and Mokee
Hopping for an answer,Have a nice day
EDIT 1 :ALL OK, FLASHED OK ON MY DEVICE, but one bug i found atm : when powered off during charge the phone rebooted against battery showing, minimal gapps used.The rom is very fast/smooth/OTG OK, may be the r38 optimus must be flashed(my next step)/the dt2w & Sweep2Wake not founded yet but notice the ukm not flashed yet, any suggestion on these?is going to work or not?
EDIT: 2 the dt2w ok after ukm flashed and synapse loaded and some adjustments made(i use interactive gov atm and cores in aggresive mode), Sweep2Wake in navbar not works on any of 2 options. One more bug? when bt headset connected after some time ,i dont remember exactly trying to turn screen on by power button the screen was freezed and needs to reboot the phone to work ok
NOTE 2 : the other asks remaining(about the file) ,the tread must be continoued and more work needed IMHO.
Congts very good work. go ahead,TNX!!! A LOT @sfoot13
Click to expand...
Click to collapse
Hi @granazis!
I'm not the dev of this rom, here is the official thread bro. http://forum.xda-developers.com/moto-g/development/5-1-1r8-tipsyos-falcon-unified-t3164343 there the dev will help you
Actually I'm not using this rom bro
About the kernel, I use Niropa's kernel http://forum.xda-developers.com/moto-g/development/kernel-niropa-1-t3161067 is the best for me (so far)
You can try too Phoenix kernel http://forum.xda-developers.com/moto-g/development/kernel-phoenix-v1-t3176225 is a very good kernel too, and if you use dt2w features, you'll like it!
I attached the file that you need
Have a nice day bro, God bless you
ronny4444 said:
is it compatible with xposed?
Click to expand...
Click to collapse
I don't know bro. but you can try
sfoot13 said:
Hi @granazis!
I'm not the dev of this rom, here is the official thread bro. http://forum.xda-developers.com/moto-g/development/5-1-1r8-tipsyos-falcon-unified-t3164343 there the dev will help you
Actually I'm not using this rom bro
About the kernel, I use Niropa's kernel http://forum.xda-developers.com/moto-g/development/kernel-niropa-1-t3161067 is the best for me (so far)
You can try too Phoenix kernel http://forum.xda-developers.com/moto-g/development/kernel-phoenix-v1-t3176225 is a very good kernel too, and if you use dt2w features, you'll like it!
I attached the file that you need
Have a nice day bro, God bless you
Click to expand...
Click to collapse
Hi, at first TNX!! for your quick responce exclusively for THE FILE NEEDED (at last i have it) and all your infos,i know that you ar'not the dev. As you read on my 1st post on this thread the most of problems solved atm and dt2w works, continuing to be in testing mode, because of my experience this rom worth the pain, so i would like to remain as a maintainer but it depends on you. The reason for file asked is to know in what fs your rom runing just to try to revert the needed files to be flashed on my device on wich all fs are in EXT4 format as it's a Gpe edition. My last question is: the file you send me refered on rom you are runing? or remind me wich one you are runing now.
Sorry for any typos or wrong syntax.
Once more THX! BW
My best wishes
@granazis I was using ResurrectionRemix when I took the info, today I'm using MinimalOS, lately I'm flashing more roms than before xD.
RR is based on CM, and I think that Minimal OS is based on Slim (I'm not 100% sure).
Time ago I converted my data (internal storage) to f2fs (using TWRP), if you that someday, be careful, do a backup of your internal storage because it will erase all your data, and no one wants that.
And for the syntax, don't worry bro., I'm learning english, my native language is spanish, so I make mistakes writing too.
sfoot13 said:
@granazis I was using ResurrectionRemix when I took the info, today I'm using MinimalOS, lately I'm flashing more roms than before xD.
RR is based on CM, and I think that Minimal OS is based on Slim (I'm not 100% sure).
Time ago I converted my data (internal storage) to f2fs (using TWRP), if you that someday, be careful, do a backup of your internal storage because it will erase all your data, and no one wants that.
And for the syntax, don't worry bro., I'm learning english, my native language is spanish, so I make mistakes writing too.
Click to expand...
Click to collapse
TNX! BW for your reply i was sure for that as i knew enough about your behaviour because of our communication.The minimal os rom is a mix of cm based and slim rom i think, can look my posts: #106 #107 #113 ##123 on the thread of this rom, the last one refered on file also asked and TOOK by YOU only!!!, the reason? i would like to flash this rom. As for fs conversion i met a serious problem trying to revert on F2 and by a wrong of me i lost thet OS , so started from scratch my phone is still alive this mean the dangers are WELL known ( the internal files was backuped on my pc)
Thanking for so kindly reply take a look what i wrote for you on original thread you suggest me for Tipsy rom.
BTW:The rom is excellent all problems solved, batt responce,ram managment,dt2w, swipe2w(its better than dt2w because of no pocket problem), gps,otg, adb....... all works good. If you flash the ninimal os and time having i would like to have the related file (optional). Yesterday night i was thinking to ask by PM about your Nationality.
My best wishes
EDIT: Sorry i just see that you already send the minimal os file!!!!
granazis said:
TNX! BW for your reply i was sure for that as i knew enough about your behaviour because of our communication.The minimal os rom is a mix of cm based and slim rom i think, can look my posts: #106 #107 #113 ##123 on the thread of this rom, the last one refered on file also asked and TOOK by YOU only!!!, the reason? i would like to flash this rom. As for fs conversion i met a serious problem trying to revert on F2 and by a wrong of me i lost thet OS , so started from scratch my phone is still alive this mean the dangers are WELL known ( the internal files was backuped on my pc)
Thanking for so kindly reply take a look what i wrote for you on original thread you suggest me for Tipsy rom.
BTW:The rom is excellent all problems solved, batt responce,ram managment,dt2w, swipe2w(its better than dt2w because of no pocket problem), gps,otg, adb....... all works good. If you flash the ninimal os and time having i would like to have the related file (optional). Yesterday night i was thinking to ask by PM about your Nationality.
My best wishes
EDIT: Sorry i just see that you already send the minimal os file!!!!
Click to expand...
Click to collapse
Hi! good afternoon
I saw your post on the original thread, you said "her" xD, hahaha I'm not a girl bro. I'm not the person on the photo, is just a pic that I found on the web and drawed it (sorry for the confusion) and I'm from Chile (South-America).
So, I learned today (thanks to you) that is not a good idea convert my phone to GPE edition is very tedious backup the whole SD, flash the firmware, and do the same again if you want to bring back the original version, is a process that I hate (flash original firmware).
sfoot13 said:
Hi! good afternoon
I saw your post on the original thread, you said "her" xD, hahaha I'm not a girl bro. I'm not the person on the photo, is just a pic that I found on the web and drawed it (sorry for the confusion) and I'm from Chile (South-America).
So, I learned today (thanks to you) that is not a good idea convert my phone to GPE edition is very tedious backup the whole SD, flash the firmware, and do the same again if you want to bring back the original version, is a process that I hate (flash original firmware).
Click to expand...
Click to collapse
SORRY sir!, usually the members/users put their own photo or country flag ,so i was confused. I revert my phone to Gpe: 1. because of my occupation(Electronic engineer) i like to to be in strange situations trying to find solutions just to be experienced that i had no on this field.
2. Because Google give the updates much earlier on Gpe devices and the support goes more far off than Moto, e.g my LG Nexus 4 released on 2012(the best phone i never had) and now its runing on stock 5.1 and a new update is up now as i read, and notice that the stock Gpe 5.1 is the best stock rom that i never had(very fast,reliable,no bugs atall,very good batt and ram managment but with less features than custom roms independed of difficulties we have on flashing). Sometime i will return back to stock Gpe rom to take the updates as i am against custom roms but try on these just for experience
EDIT: you are not wondering whats the meaning of BW abr.(and its really a nice photo so not do such wrongs, just a joke my friend) its mine and the meaning is Beautiful Woman, ha ha ha iam laughing with myself,how stupid i am???
Sorry for bla bla bla
So glad to know you. Greetings to Chile from Greece.
granazis said:
SORRY sir!, usually the members/users put their own photo or country flag ,so i was confused. I revert my phone to Gpe: 1. because of my occupation(Electronic engineer) i like to to be in strange situations trying to find solutions just to be experienced that i had no on this field.
2. Because Google give the updates much earlier on Gpe devices and the support goes more far off than Moto, e.g my LG Nexus 4 released on 2012(the best phone i never had) and now its runing on stock 5.1 and a new update is up now as i read, and notice that the stock Gpe 5.1 is the best stock rom that i never had(very fast,reliable,no bugs atall,very good batt and ram managment but with less features than custom roms independed of difficulties we have on flashing). Sometime i will return back to stock Gpe rom to take the updates as i am against custom roms but try on these just for experience
EDIT: you are not wondering whats the meaning of BW abr.(and its really a nice photo so not do such wrongs, just a joke my friend) its mine and the meaning is Beautiful Woman, ha ha ha iam laughing with myself,how stupid i am???
Sorry for bla bla bla
So glad to know you. Greetings to Chile from Greece.
Click to expand...
Click to collapse
Hi bro!
BW hahahaha xD
The other day I formatted my phone from f2fs→ext4 and I'm very surprised, because the performance of phone increased notably :laugh:, was a very good decision.
Hey guys
I've seen some Android Q GSI Images on the internet and I'm asking myself whether or not they would work with our axon (A2017G for me)?
Also, I have a general question about GSI on Axon: I've seen A GSI Roms, B GSI Roms and A/B GSI Roms.. what's the difference and more importantly, which one of those can I take for our axon? I have trebleized right now on latest LiquidRemix Pie
Thanks in advance,
Fred x
No harm in trying them out. We use x64 A only. No idea what the differences are
jojofreddy said:
Hey guys
I've seen some Android Q GSI Images on the internet and I'm asking myself whether or not they would work with our axon (A2017G for me)?
Also, I have a general question about GSI on Axon: I've seen A GSI Roms, B GSI Roms and A/B GSI Roms.. what's the difference and more importantly, which one of those can I take for our axon? I have trebleized right now on latest LiquidRemix Pie
Thanks in advance,
Fred x
Click to expand...
Click to collapse
There are only two actually: A-only and AB ROMs, this pertains to the seamless update scheme. A-only means you only have one system partition, while AB means that there are two system partitions. If your phone is AB then the ROM can download updates in the background and flash them to the unused partition, and after it's done you can reboot and the active partition will be switched to that one. you basically don't lose time updating.
When Treble for our phone was made by djkuz, it was unclear whether it would be possible to implement an A/B scheme. We wouldn't lose much storage space (maybe none at all) because our stock system partition is actually huge, so it could be shrunk considerably and duplicated (I think it's 6GB in size). Oki said he would look into it some time ago.
Just use ARM64 A-only images for the Axon
Try Q yourself and report back, there's no obvious reason why it wouldn't work. maybe it does, maybe it doesn't, the question is why you would even bother with a leaked release idk
Thank you for your in-depth answer!
I've seen that leaked GSI Rom but also read an article that some sort of DP or Beta will be officially released soon. Maybe I'll get into Rom building, maybe I'll just try and report back, but of course: being on the very bleeding edge
Cheers
I tried the only gsi rom I could find at the time of writing this. I had no luck with all the vendors we have here. Every time I reboot I get a promising android text on the screen as if its booting but soon after it goes to the fastboot menu. It did this for every vendor i used. Let me know other peoples luck with this.
That leaked GSI will never work in axon7 because it requires the device to be "system as root" .
I heard that there will be another version of the GSI but could not find it anywhere
king1990 said:
That leaked GSI will never work in axon7 because it requires the device to be "system as root" .
I heard that there will be another version of the GSI but could not find it anywhere
Click to expand...
Click to collapse
Could you briefly explain what this is?
stevecaboose said:
Could you briefly explain what this is?
Click to expand...
Click to collapse
System-as-root requires the ramdisk to be part of the system image, as in the AB images
It also loads your img file into root " { "/" folder } compared to the normal /system before.
So, if your kernel is not configured to read the ramdisk from system, then it would not be able to use a System-as-root image.
This is my understanding of it, correct me if I am wrong..
Could someone please make an unofficial orange fox recovery for red magic 5g.. I am currently using the RR custom rom with android version 10 on my device and It's highly customizable but there are two things I don't like.. (1) there is practically no way to configure finger print on the device and (2) the rgb backlights and notification led doesn't work. Also, NFC doesn't work but I tbh don't care much about it.
You can check the below link I have mentioned everything in detail. ( Post in thread '[ROM] [UNOFFICIAL] Resurrection Remix OS 8.x [Q|Android 10.0]' https://forum.xda-developers.com/t/...x-os-8-x-q-android-10-0.4194675/post-86231789 )
I tried flashing the unofficial android 12 GSI using fastboot as there is no way using twrp but all I ended up with was a bricked phone trice. For the 4th time it flashed but I was having performance issues (I din't try custom kernels as I got really fedup) so I just left it and got back to RR. I heard that there is an easier way to flash .img files on dynamic partitions android device using orange fox recovery. Or if there is an easy way to flash a GSI on my device plz suggest the procedure.
My device spec - 12gb ram, 128gb rom, RM5G
you can build an OF recovery using the OF builder tutorial on github, and using a stock recovery for the device much like the way TWRP bots build recoveries for devices.
When you get it built, post your sources in the dev section here, and add a donation link. if the recovery works with current android 11 and is better than the current TWRP variations, I will donate for the completed work. I hope too that others will contribute to it.
good luck.
also i dont know why this is not in the Q and A section. its not a guide, or a discussion. its a request / question for dev work.