here are cw for download. you can put in this thread all new versions of cw recovery
ClockworkMod Recovery 6.0.3.3with Touch Interface
Download:
https://code.google.com/p/forumber-projects-for-u8800/downloads/detail?name=recovery-clockwork-6.0.3.3-touch-u8800_installable.zip&can=2&q=
Bugs:
No offmode charging
Installation:
Install the zip via any recovery.
ClockworkMod Recovery 6.0.2.8
Download:
http://code.google.com/p/forumber-projects-for-u8800/downloads/detail?name=recovery-clockwork-6.0.2.8-2.6.35.7-u8800.img&can=2&q=
Bugs:
I have not encountered any problems.
ClockworkMod Recovery 5.0.2.8
Download:
http://code.google.com/p/forumber-projects-for-u8800/downloads/detail?name=recovery5.0.2.8-2.6.35.7-u8800.img&can=2&q=
Difference of 5.0.2.7 by genokolar:
-All of framebuffer (graphic) problems are fixed.
-Kernel updated so mount problems are fixed
-Softkey lights are open by default
-USB Mass Stroage faster than older
-ADB working
Bugs:
-It hasn't got any bug
Installation:
Root your phone.
Download the recovery.img down below.
Save it to wherever you want.
Make sure the image name is recovery.img, rename if needed.
Download any root file manager, which can mount and show hidden folders.
Mount /.cust_backup as rw.
Copy and replace recovery.img from SD card to /.cust_backup/image/recovery.img
Thanks to:
Blefish --for graphic.c ,his explanations and help about anything. You are the great man!
Dazzozo --for help about rmt_stroage,and random reboots
stockwell --for recovery.fstab,offmode charge modules etc.
wmi543 --for CyanogenMod vendor tree
Seems great! :good:
Good work.
btw are you going to update TWRP Recovery?
dark_vader said:
Good work.
btw are you going to update TWRP Recovery?
Click to expand...
Click to collapse
The new version is uploading...
Re: [RECOVERY] ClockworkMod Recovery 5.0.2.8
Good stuff, softkeys working (it didn't with 5.0.2.5)
Sent from my Huawei U8800
the sd card cannot be mount. iam the only one?
vlc_marcos said:
the sd card cannot be mount. iam the only one?
Click to expand...
Click to collapse
did you try advanced > reboot recovery ?
ok its working. thanks
Hello.
Just a question i used this recovery and now i want to get back to the old 4.0.0.5 because i have lots of backups that is not supported from 5.0.2.8.
I changed to the old 4.0.0.5 recovery.img but my phone doesnt load the recovery.It stucks at ideos logo.
But when i use the 5.0.2.8 the recovery works fine.
Why is this happening?
snaker12 said:
Hello.
Just a question i used this recovery and now i want to get back to the old 4.0.0.5 because i have lots of backups that is not supported from 5.0.2.8.
I changed to the old 4.0.0.5 recovery.img but my phone doesnt load the recovery.It stucks at ideos logo.
But when i use the 5.0.2.8 the recovery works fine.
Why is this happening?
Click to expand...
Click to collapse
hi there. i presume your problem is related to the recovery itself.
i can be wrong, but i guess that the old recovery 4.0.0.5 is based in the old .32kernel. that's because u cant load it.
If i'm wrong, pls let me know!
snaker12 said:
Hello.
Just a question i used this recovery and now i want to get back to the old 4.0.0.5 because i have lots of backups that is not supported from 5.0.2.8.
I changed to the old 4.0.0.5 recovery.img but my phone doesnt load the recovery.It stucks at ideos logo.
But when i use the 5.0.2.8 the recovery works fine.
Why is this happening?
Click to expand...
Click to collapse
Yes. 4.0.0.5 recovery it's based on 2.2 so if you want use this old recovery you must downgrade to froyo.
Mlopik said:
Yes. 4.0.0.5 recovery it's based on 2.2 so if you want use this old recovery you must downgrade to froyo.
Click to expand...
Click to collapse
Then i must be wrong at the clockwork recovery that i think it was 4.0.0.5.
My old recoverys from Oxygen rom which is 2.3.7 have this structure:
.android_secure.img
cache.img
cust.img
data.img
system.img
This recovery has this structure:
.android_secure.vfat.tar
boot.vfat.tar
cache.ext4.tar
data.ext4.tar
system.ext4.tar
So i assume this is the reason that when i try to recover to my old recoverys the rom reboots freezes and all the wierd stuff.
Can you please tell me which recovery has the old stucture of recovery that i mensioned before and that supports 2.3.7 which is my oxygen backups.
Thanks
snaker12 said:
Then i must be wrong at the clockwork recovery that i think it was 4.0.0.5.
My old recoverys from Oxygen rom which is 2.3.7 have this structure:
.android_secure.img
cache.img
cust.img
data.img
system.img
This recovery has this structure:
.android_secure.vfat.tar
boot.vfat.tar
cache.ext4.tar
data.ext4.tar
system.ext4.tar
So i assume this is the reason that when i try to recover to my old recoverys the rom reboots freezes and all the wierd stuff.
Can you please tell me which recovery has the old stucture of recovery that i mensioned before and that supports 2.3.7 which is my oxygen backups.
Thanks
Click to expand...
Click to collapse
5.0.2.7 ,5.0.2.8 and TWRP recoveries are based on 404020 baseband and 2.6.35.7 kernel. Older recoveries are based on 129005 baseband and 2.6.32.9 kernel.
Clockworkmod switched nandroid backup file type to .tar since CWM 5.x.x.x, CWM 4.0.0.5 uses .img file type for backups.
So which CWM was released after 4.0.0.5 and before 5.x.x.x ?
Because if Mlopik said 4.0.0.5 is for froyo 2.2 then which CWM is for 2.3.5 / 2.3.7 and supports .img files?
snaker12 said:
So which CWM was released after 4.0.0.5 and before 5.x.x.x ?
Because if Mlopik said 4.0.0.5 is for froyo 2.2 then which CWM is for 2.3.5 / 2.3.7 and supports .img files?
Click to expand...
Click to collapse
5.5.0.4 and 5.0.2.7 for GB?
snaker12 said:
So which CWM was released after 4.0.0.5 and before 5.x.x.x ?
Because if Mlopik said 4.0.0.5 is for froyo 2.2 then which CWM is for 2.3.5 / 2.3.7 and supports .img files?
Click to expand...
Click to collapse
All of CWM versions supports all of android versions. Mlopik want to say 5.0.2.6 and older CWM versions are supports only 129005 baseband and 2.6.32.9 kernel.
Which baseband or kernel version do you use?
ClockworkMod Recovery 6.0.2.8 added.
Enjoy
Gonna "flash" right now. What are differences?
Thanks dude :good:
Re: [RECOVERY] ClockworkMod Recovery | 5.0.2.8 & 6.0.2.8 |
No changelog?
★Sent From My U8800★
don't see any diference at all between 5.0.2.8 and 5.0.2.7....
Where are they exactly?
CLOCKWORKMOD 6.0.4.6 NON-TOUCH RECOVERY - UPDATED Jan/2014
(Compiled from CM11 Source - In development)
For those who wants to flash it from Odin just download the zip file (Odin Install). In Odin, point to 'recovery.tar.md5' and start flashing.
For those who wants just update a CWM already flashed download the zip file to sdcard. Reboot to CWM Recovery and install zip 'Flash_CWM_v6.0.4.6.zip'.
Portuguese instructions for brazilians and portugueses users, visit: goo.gl/k0QgXH
Download Links: (Copy and paste to browser).
Clockworkmod Update:
mega.co.nz/#!2AdGBDzY!G3jtsCUumL5a7bt_2IqYKkM6GoZalaHPFR94G6cD_Ro
Clockworkmod Odin Install:
mega.co.nz/#!GYFQySRR!S6IR6jlZpZl_stWTeEhBwRDBFY83WUPCTVQ-11og1mM
Thanxx
I have an acer Iconia a500 with Clockworkmod Recovery v5.0.0.0(Thor2002ro rev 1.3.4). All of the posts I see about the new ClockworkMod are about installing it. How can I update it using the ClockworkMod I already have installed?
Installed CWM-install-recovery_thor1.7.zip from this thread: http://forum.xda-developers.com/showthread.php?t=1622425
and now recovery doesn't boot
recovery
if you go to tegraowners.com you will find much newer recoveries by thor
twrpv2b2 works great on A50x
PHILZ RECOVERY FOR MICROMAX A120,WIKO RAINBOW AND CLONES WITH AROMA FILE MANAGER
THIS RECOVERY SUPPORTS AROMA FILE MANAGER WHICH IS VERY USEFULL IN MANY THINGS
BELOW ARE THE ATTACHMENTS OF FILE IN A ZIP
INSTRUCTIONS TO INSTALL
FIRST UNPACK THE ZIP FILE
U WILL GET 1 FOLDER NAMED AROMAFM AND RECOVERY.IMG
TRANSFER THE AROMAFM FOLDER TO YOUR SD CARD IN FOLDER NAMED CLOCKWORKMOD{note:-if clockworkmod named folder is not there create it in root of sd card}
NOW FLASH THE RECOVERY USING SP TOOLS OR FLASHIFY ANDROID APP
( Dont forget to backup current recovery)
NOW REBOOT IN THE RECOVERY AND SELECT ADVANCED-->AROMA
YIPPEE U HAVE THE PHILZ RECOVERY WITH AROMA FILE MANAGER :good:
DOWNLOAD LINKS
Click here to download
Credits:-
omkar1997[me]
philz for this awesome recovery
AMARULLZ FOR AROMA FILE MANAGER
INFORMATION:-
CWM VERSION:- V6.0.5.1
PHILZ VERSION :- V6.59.0
Reserved
You can flash this with Flashify from Playstore also. Its more easy and you can backup your original recovery, too!
Lecterr said:
You can flash this with Flashify from Playstore also. Its more easy and you can backup your original recovery, too!
Click to expand...
Click to collapse
Thanx
I will add this in guide too
thanks
I have a wiko rainbow with a recovery (carliv on CWM).... how can I install philz directly from my current recovery?
thanks in advance
tispoon69 said:
thanks
I have a wiko rainbow with a recovery (carliv on CWM).... how can I install philz directly from my current recovery?
thanks in advance
Click to expand...
Click to collapse
you can install using flashify app from playstore
Recovery showing mount error !
A120 Micromax
sahasoumitra007 said:
Recovery showing mount error !
A120 Micromax
Click to expand...
Click to collapse
It's for Wiko Rainbow base. You have to flash wiko v13 firmware using SP flash tools first.
SpEeDeX^