Related
Searched, but couldn't find an answer to this. I rooted and installed ROM Manager so I can do a nandroid backup before installing a custom ROM. However, when I press back up in ROM Manager, it restarts and hangs/freezes on the HTC MyTouch 4g splash screen.
What am I doing wrong?
Have you flashed CWM recovery after installing Rom Manager. You must flash the recovery before you can backup/restore or install roms. I almost did that myself but luckily i read the thread concerning it again and flashed REcovery before trying to back up rom.
Yeah, I did that first and the problem remains. I just uninstalled and reinstalled ROM Manager and am about to try "backup current rom" again (unless I should reboot into recovery and back up from clockwork recovery?).
FWIW; Current recovery is ClockworkMod 2.5.1.2
anyone?
Did you ever find a solution to this problem? I just started getting exactly the same. Cant reboot manually into clockwork recovery or from Rom manager :/
If you have flashed a recovery beyond that supported by ROM manager, you will not be able to perform recovery functions from the app (i.e. backup). CW3 is required for CM7 ROMs, but will not be supported by ROM manager until the CM7 RC drops. You can still manually boot to recovery (I always Vol up when powering then select Recovery) and if you have CM7 nightly installed, it has a "reboot to recovery" option in the reboot menu.
You need CWM3 to use CM7.
neronian said:
anyone?
Click to expand...
Click to collapse
Sometimes it is necessary to flash clockwork recovery more than once before it will actually stick. Also, occasionally it will freeze on the splashscreen after a backup, but a battery pull and turning out the phone should be fine.
Sent from my HTC Glacier using XDA App
Here's what's going on:
The Clockworkmod Recovery that you can download from the Market only supports up to CyanogenMod 6.x. For CM7, you need to install Clockworkmod Recovery 3.x, but that version isn't available on the Market yet.
What this means is that you need to find the image file for a CWR 3.x on these forums and manually install it through either a terminal emulator or fastboot. The post below explains how to do it:
http://forum.xda-developers.com/showpost.php?p=10862819&postcount=3
If you flash CM7 using CWR 2.x, your phone won't boot. There's just no way around it.
hammondnav said:
Here's what's going on:
The Clockworkmod Recovery that you can download from the Market only supports up to CyanogenMod 6.x. For CM7, you need to install Clockworkmod Recovery 3.x, but that version isn't available on the Market yet.
What this means is that you need to find the image file for a CWR 3.x on these forums and manually install it through either a terminal emulator or fastboot. The post below explains how to do it:
http://forum.xda-developers.com/showpost.php?p=10862819&postcount=3
If you flash CM7 using CWR 2.x, your phone won't boot. There's just no way around it.
Click to expand...
Click to collapse
Careful with the terminology there. ROM Manager, the app you download from the Market, is a GUI front-end to the CWM recovery image, but you can download and install CWM without using ROM Manager at all. Just because you have ROM Manager installed doesn't mean that CWM recovery is also successfully installed.
TeeJay3800 said:
Careful with the terminology there. ROM Manager, the app you download from the Market, is a GUI front-end to the CWM recovery image, but you can download and install CWM without using ROM Manager at all. Just because you have ROM Manager installed doesn't mean that CWM recovery is also successfully installed.
Click to expand...
Click to collapse
Thanks for pointing that out. I didn't imply that CW ROM Manager and CW Recovery are the same thing though...
hammondnav said:
Thanks for pointing that out. I didn't imply that CW ROM Manager and CW Recovery are the same thing though...
Click to expand...
Click to collapse
You said "the Clockworkmod Recovery that you can download from the Market", and that kinda does. No biggie though.
Just an update for my problem, it turned out that clockwork recovery had corrupted for whatever reason and couldn't be reinstalled from rom manager. As I wanted to test Cm7 anyways I just ended up flashing clockwork recovery 3 manually through fastboot and its all gravy again
Sent from my Desire HD using XDA App
How to flash clockwork recovery from fastboot or fron clockwork recovery 2.51?
Sent from my SGH-T959 using XDA App
Thanks, everyone. What happened with mine, I have no idea, but I randomly opened rom manager and was greeted with an update to the recovery. So I downloaded it and voila - I can now boot into recovery and do backups, etc...
Where can I find the CWM download and install instructions?
try the search-function: ClockworkMod
CW
its in the android for Hd2 thread with guide label
when i boot the phone, bootloader - recovery , there i have clockwork 2.5.0.1.
when i choose reboot into recovery from rom manager, i have 2.5.0.7.
why i have 2 clockworkmod recovery ?
auleu said:
when i boot the phone, bootloader - recovery , there i have clockwork 2.5.0.1.
when i choose reboot into recovery from rom manager, i have 2.5.0.7.
why i have 2 clockworkmod recovery ?
Click to expand...
Click to collapse
That is because ROM Manager downloads and stores a temp recovery on your sdcard which it loads when you reboot with it. When you reboot into recovery manually you're loading the recovery image that you flashed to your device with Unrevoked.
aha
so does it matter from what recovery i install a custom rom?
auleu said:
aha
so does it matter from what recovery i install a custom rom?
Click to expand...
Click to collapse
No, there is only one system disk where install the ROM
i dont see the need of a second recovery
auleu said:
i dont see the need of a second recovery
Click to expand...
Click to collapse
Say you accidently flash over your recovery.img (The system one, impossible unless you have S-OFF/do some exploit)... update.zip (Rom Manager one) to the rescue! And vice versa.
Most common use is if you have CWM 3.0.0.6 like me, and sometimes you need to use Amend scripts for radio, etc.
aha
but i do have s off
Hi all,
I have a amonRA recovery installed in my tattoo and have made a nandbackup. Now i want to switch to Clockworkmod recovery. Can i somehow use the nand backup from amonRA recovery in clockworkmod recovery???
PLEASE HELP!!!!
If you used the one click root and recovery method, just stick the downloaded clockword recovery .img file in the sdcard folder. Run the recovery script, and you're done!
sharath.cheeku said:
Hi all,
I have a amonRA recovery installed in my tattoo and have made a nandbackup. Now i want to switch to Clockworkmod recovery. Can i somehow use the nand backup from amonRA recovery in clockworkmod recovery???
PLEASE HELP!!!!
Click to expand...
Click to collapse
When the clockworkMod is installed, with the new menu you are able to make backup
all the times the you need.
sharath.cheeku said:
Hi all,
I have a amonRA recovery installed in my tattoo and have made a nandbackup. Now i want to switch to Clockworkmod recovery. Can i somehow use the nand backup from amonRA recovery in clockworkmod recovery???
PLEASE HELP!!!!
Click to expand...
Click to collapse
NO
u cant
amonRA recovery backup only use in amonRA
Switch from AmonRA to ClockworkMod
laughingcavalier said:
If you used the one click root and recovery method, just stick the downloaded clockword recovery .img file in the sdcard folder. Run the recovery script, and you're done!
Click to expand...
Click to collapse
Where can I find the recovery script??? I have installed Amon-RA using ADB console. I want to flash CM7 and getting "Status 7 error". Want to install ClockWorkMod Recovery. But when I do it from ROM Manager, it always goes to RA-Tattoo Recovery mode...not into ClockWorkMod. Not able to flash CWM from ADB...
Cld u pls help me in switching from Amon-RA to ClockworkMod Recovery.
Or How can I uninstall Amon-RA ???
i just installed cm7 (Mills00013's cdma version) and was wondering if i go to the clockwork mod recovery app that was installed with it, would flashing clockworkmod recovery mess up my phone, or would it work because i heard that cm7 for xplay can use cmw recovery?
thanks in advance
bump
10 chars blah
loismustdie555 said:
i just installed cm7 (Mills00013's cdma version) and was wondering if i go to the clockwork mod recovery app that was installed with it, would flashing clockworkmod recovery mess up my phone, or would it work because i heard that cm7 for xplay can use cmw recovery?
thanks in advance
Click to expand...
Click to collapse
Old thread, but Clockwork red is normally needed to get CM7 or MIUI started, then Clockwork Blue is installed, and you re-install the ZIP for CM7/MIUI full functional. Clockwork just replaces the stock recovery files.
You can't flash clockworkmod recovery. When you open rom manager, you'll notice that there is no available recoveries for our phones. In addition to that, there is no way for the system to flash a recovery if it wanted to because there is no actual recovery partition to overwrite for our devices. The recoveries we are blessed with using now use a kernel modification to allow recovery to boot from the boot partition, which cannot be touched except with fastboot.
Sent from my R800x using XDA App