Hi guys im new on XDA...Actually I follow xda from time optimus one but I never registered on this fantastic forum so now it is almost 6 years that i use xda. OK go back to my problem .... After a clean installation of the CM13 on my g2 all works fine but there is only one problem with the wifi...Wifi connects and disconnects without any reason and it is annoying someone can help me or have a fix about this. I apologize if I have not posted in the official thrade rom (mean on the official post of CM13 ) but xda limits the possibility to post on developer post until they reach at least 10 posts . Best regards and thanks in advance
Hi, i think you are experiencing that problem, becouse not everything is fixed and stable since this is a rom in a alpha stage, and yes i have that problem too on the 13/12/2015 nigthly installation. I recommend using cm 12.1 for daily use until cm 13 gets more stable.
Bests regards! I hope i could help!
When I using cyanegonmod 12.1, I have a obtaining ip adress bug. i can't solve this now I'm using cloudyg2 v3.3 (I'm sorry for my english)
So never mind right now I stay with this little problem untill a new fix, at least I'm not the only one with this problem... By the way thanks all for the help
I had the same bug on the same nightly, yesterday I've clean installed lastest one and the issue seems to be solved.
Felipe_PS said:
I had the same bug on the same nightly, yesterday I've clean installed lastest one and the issue seems to be solved.
Click to expand...
Click to collapse
Seriously? If you are sure I will try to do the same
-I can't proceeded to music
-systtem has stopped once a hour
-I can't close touching vibration
When I was using cm13 I have that problems. are there solved?
MUSTTROLL said:
-I can't proceeded to music
-systtem has stopped once a hour
-I can't close touching vibration
When I was using cm13 I have that problems. are there solved?
Click to expand...
Click to collapse
Ye the music problem it's confirmed by some peoples for the other 2 I don't know..
Can you close soft keys vibration
MUSTTROLL said:
Can you close soft keys vibration
Click to expand...
Click to collapse
Tested right now and I can't so I have your same problems that's good cuz I'm not the only one at least
Did you try apply a lot of themes or edit tiles on statusbar
Any news on this issue? Some friends and myself are having this problem with our G2 and G3 devices.
System stopped, wifi, and battery draining problems has solved system has stable but İ can't scretch to music?
ZiPPO____ said:
Seriously? If you are sure I will try to do the same
Click to expand...
Click to collapse
I'm pretty sure it solved the bug
Related
Good news for Idea Blade users. The CM7 Rom by Burgerz found here works on our phones perfectly. Camera and touchscreen issues are fixed and the Rom is FAST. I'm using it now, you might want to give it a try
Cheers!
Thanks for handing out the information mate because i was getting lots of PM`s about that reason and i could not give a clear answer.
No problem
hi,
Tried the Rom on my Idea blade and camera gives error. the same error as other versions of CM7. "cannot connect camera"
Format all your partitions from cwm and try flashing again
hi couldn't download the rom from official page, could you please upload to mediafire thanks.
Dear jerrinfrncs,
Try this link: h**p://burgerz.pro/zte-blade/roms/
Rapier07 said:
Good news for Idea Blade users. The CM7 Rom by Burgerz found here works on our phones perfectly. Camera and touchscreen issues are fixed and the Rom is FAST. I'm using it now, you might want to give it a try
Cheers!
Click to expand...
Click to collapse
What about the battery performance? How long it last in standby mode?
praatikr said:
What about the battery performance? How long it last in standby mode?
Click to expand...
Click to collapse
I get one day with data always on, some games, browsing and music
Rapier07 said:
Format all your partitions from cwm and try flashing again
Click to expand...
Click to collapse
I Have an Idea Blade. Had problem with both camera and touchscreen in CM7.1.0. Yesterday i tried the CM7 Rom by Burgerz. Touchscreen is working properly but still can't use the camera. The same "cannot connect camera" error appears.What are all the partitions should i format? I've formatted data, cache and dalvik partitions. Still the problem persists.
zajith said:
I Have an Idea Blade. Had problem with both camera and touchscreen in CM7.1.0. Yesterday i tried the CM7 Rom by Burgerz. Touchscreen is working properly but still can't use the camera. The same "cannot connect camera" error appears.What are all the partitions should i format? I've formatted data, cache and dalvik partitions. Still the problem persists.
Click to expand...
Click to collapse
Some newer Blades have different hardware which needs different drivers to work. As ZTE doesn't release the source code for these properly, the current roms won't work properly on all of the newer versions. If may be possible that someone can fix it, but without ZTE releasing the sources it will be difficult for them.
jerrinfrncs said:
hi couldn't download the rom from official page, could you please upload to mediafire thanks.
Click to expand...
Click to collapse
i tried to download from that page but it never completes, gets cut off and can't resume. if somebody could upload to mediafire it would be very helpful thanks
I'm running this one from Burstlam and really like it. I prefer it because Burgerz's using and older (and plain) launcher. Camera works fine also.
burstlam
Posted 17 February 2012 - 08:33 PM:
latest build , OC, wifi-UV, 2 way Recording enabled Kernel. (ie.: no CPU UV)
Full Lanaguage, Latest repo sync + Fixed ICS rotation Animation.+ ... many other
to-be-merged Gerrit Patches
Normal Version:
http://hotfile.com/dl/146855038/9e67238/N353X-35-Full-Lang-signed.zip.html
md5 : 7b1b30ec08274fac0d961817543e3794
From: http://android.modaco.com/topic/335...-237/page__st__12620__p__1902127#entry1902127
ok installed it on my idea blade and everything was working perfectly until i switched off. on turning the phone on the touchscreen stopped responding, got similar problem with swedish snow and MMHMP.
jerrinfrncs said:
ok installed it on my idea blade and everything was working perfectly until i switched off. on turning the phone on the touchscreen stopped responding, got similar problem with swedish snow and MMHMP.
Click to expand...
Click to collapse
You might want yo PM the dev about it. I had similar issues on CM stable but not anymore. Also you can give a try to LewaOS and other Chinese roms. They are based on cm7 fot the V880 which is what idea blade is.
jerrinfrncs said:
ok installed it on my idea blade and everything was working perfectly until i switched off. on turning the phone on the touchscreen stopped responding, got similar problem with swedish snow and MMHMP.
Click to expand...
Click to collapse
I also had the same problem with CM7.1. Formatting the cache and data partitions might make the touchscreen work (worked for me). Even though you format the partitions, touchscreen will stop working after the phone get into sleep mode and you have to format the data and cache partitions every time the touchscreen stops responding.
I have heard that Libraginger works fine on ZTE-U V880. But the download link seems to be broken. I am working on CM7 Rom by Burgerz even though camera is not functioning as i feel it is much stable and lesser buggier than official ZTE rom.
Amphoras said:
Some newer Blades have different hardware which needs different drivers to work. As ZTE doesn't release the source code for these properly, the current roms won't work properly on all of the newer versions. If may be possible that someone can fix it, but without ZTE releasing the sources it will be difficult for them.
Click to expand...
Click to collapse
Is there any way to backup driver for the camera from the stock rom and use it the current custom rom? I know the kernels are different. Still is there any chance?...
Sent from my Blade using XDA App
zajith said:
Is there any way to backup driver for the camera from the stock rom and use it the current custom rom? I know the kernels are different. Still is there any chance?...
Sent from my Blade using XDA App
Click to expand...
Click to collapse
Not that I know of, sorry.
jerrinfrncs said:
ok installed it on my idea blade and everything was working perfectly until i switched off. on turning the phone on the touchscreen stopped responding, got similar problem with swedish snow and MMHMP.
Click to expand...
Click to collapse
Even i had the same touchscreen problem when i installed MMHMP on my idea blade. All i had to do is restore the stock rom which was working fine and then i again installed MMHMP and its working fine.
Any method for custom partition in idea blade?
I want more space
Hi
I used ROM : CyanogenMod 10.1 Nightlies
cm-10.1-201301.25- NIGHTLY
today I use Alarms but it say a message
Unfortunately, Clock has stopped
Click to expand...
Click to collapse
Anyone can help me. How to fix it.
Thanks for help !
balack said:
Hi
I used ROM : CyanogenMod 10.1 Nightlies
cm-10.1-201301.25- NIGHTLY
today I use Alarms but it say a message
Anyone can help me. How to fix it.
Thanks for help !
Click to expand...
Click to collapse
The reason they are called NIGHTLY! That means they are sometimes unstable, and things might break from nightly to nightly! You should wait for the next nightly and hope they fixed it
Clear data for the clock app. See if that helps.
Sent from my Nexus 4 using xda premium
El Daddy said:
Clear data for the clock app. See if that helps.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
It doesn't work
Thank you
Try 24 or 26 nightly
Same here!
Guys, I'm facing the same problem with my i9100!
I downgraded to 24 and the problem remained...
Wiped the cache, cleared the data, got me nowhere... So, what do you guys think that "broke" it?
EDIT:
I got it to work again by doing a (dreadful) factory reset :/...
The problem with that is I don't know what "broke" the Clock on the first place... I suspect it was the fact that I had some recurrent alarms when I flashed the new nightly, I'll try to remember to disable all alarms before applying the next ones!
Hi all,
my defy after some attempts is quite perfect :highfive:
I've tried different rom and configuration then I've solved my problems of Battery and fluidity with this step.
Factory Reset
wipe
Flash Rom (Android 4.1.2 Rom: 10-20130918 Get it there (Quarx))
Flash Gapps (Minimal)
wipe
Reboot
Battery Calibration when charged 100%
Nova Launcher
Then i've falled in love with my phone
I hope it will help someone
Good for you. But you did not mention the OS since there are many flavours of 4.1.2 out there. You also did not root it? sorry don't want to be a **** about it, but you are missing some points here.
Also, there is no need to - ever - calibrate battery. After 5 full load cycles it will always be calibrated.
erdnuesse said:
Good for you. But you did not mention the OS since there are many flavours of 4.1.2 out there. You also did not root it? sorry don't want to be a **** about it, but you are missing some points here.
Also, there is no need to - ever - calibrate battery. After 5 full load cycles it will always be calibrated.
Click to expand...
Click to collapse
You are right it's the version of Quarx and it's obviously rooted
The last update is smooth too (20131030). Give it a try :good:
themaker69 said:
The last update is smooth too (20131030). Give it a try :good:
Click to expand...
Click to collapse
I've tried it but i've found it less stable...crash of some app and reboot...
The only problem i've found with the 18 version concern camera...sometimes reboot when i see a video of the gallery.
You did a full wipe before install?
themaker69 said:
You did a full wipe before install?
Click to expand...
Click to collapse
Yes, i've done it before flashing...but i haven't tried it with Nova.
MikBre said:
Hi all,
my defy after some attempts is quite perfect :highfive:
I've tried different rom and configuration then I've solved my problems of Battery and fluidity with this step.
I hope it will help someone
Click to expand...
Click to collapse
It's stable but sluggish. I tried Quarx' 10.2 and SlimBean (JB4.3 based) before and I think they were more responsive.
Usb tethering and wifi hotspot dont work in any version so Im using Easytether and Wifi Tether Tom.
Cheers!
Martin
mt12345 said:
It's stable but sluggish. I tried Quarx' 10.2 and SlimBean (JB4.3 based) before and I think they were more responsive.
Usb tethering and wifi hotspot dont work in any version so Im using Easytether and Wifi Tether Tom.
Cheers!
Martin
Click to expand...
Click to collapse
That! ^
i just rooted my nexus4 (Mako) and i flashed the latest PACman ROM, i had NO issues, no errors, nothing. when i turn the phone on i notice that it doesnt recognize the wifi, is like its been disabled and then i notice that the speaker wont work either
ive been looking for someone who has the same problem, but neither here on XDA, PACman forums and google i could find something like this!
any help would be great
i used two versions of pacman and i flashed it 2 times with the same result
please, someone help me with this
Thanks
try CyanogenMod 11
eperdomo1 said:
i just rooted my nexus4 (Mako) and i flashed the latest PACman ROM, i had NO issues, no errors, nothing. when i turn the phone on i notice that it doesnt recognize the wifi, is like its been disabled and then i notice that the speaker wont work either
ive been looking for someone who has the same problem, but neither here on XDA, PACman forums and google i could find something like this!
any help would be great
i used two versions of pacman and i flashed it 2 times with the same result
please, someone help me with this
Thanks
Click to expand...
Click to collapse
Well even I'm having the same problem but not just with PAC ROMs...WiFi doesn't work on paranoid android, aokp as well...
Right now I'm running CyanogenMod 11 which is quite stable...have been using it for some time now without any issues...this, and the stock ROM are the only ones where WiFi works for me
If u found a fix please post it ...
My friend had the same problem,his phone could not connect my wifi,but mine could.If you have another phone with wifi try if you can connect.
Sometimes its not phones fault,I fixed my friends problem going to my routers page(192.168.1.1 or 192.168.0.1 Depens what router you are using. )
So I went on routers page,went to Wifi settings and then changed the channel settings(From 01 channel to 04).
And then restarted router.
My friend was able to connect to it right away.
Note:This problem began to appear when he flashed custom rom.
Hope this works for you
Dwait said:
Well even I'm having the same problem but not just with PAC ROMs...WiFi doesn't work on paranoid android, aokp as well...
Right now I'm running CyanogenMod 11 which is quite stable...have been using it for some time now without any issues...this, and the stock ROM are the only ones where WiFi works for me
If u found a fix please post it ...
Click to expand...
Click to collapse
Ditto here. Wifis greyed out on most Roms.Add Miui to this list also.. :-/ anyone know what's wrong.. ???
Absolutely NOT router related..
Running pa 4.0 beta here. No issues.
For those flashing KK roms, are you using the latest radio?
Fixed it!
redgrass83 said:
Ditto here. Wifis greyed out on most Roms.Add Miui to this list also.. :-/ anyone know what's wrong.. ???
Absolutely NOT router related..
Running pa 4.0 beta here. No issues.
Click to expand...
Click to collapse
Hey!!
@audit13 is right...
I was flashing 4.3 ROMs without flashing radio....
Go there ---> http://forum.xda-developers.com/showthread.php?t=2087227 and download and flash the correct radio files and you're good to go!!
eperdomo1 said:
i just rooted my nexus4 (Mako) and i flashed the latest PACman ROM, i had NO issues, no errors, nothing. when i turn the phone on i notice that it doesnt recognize the wifi, is like its been disabled and then i notice that the speaker wont work either
ive been looking for someone who has the same problem, but neither here on XDA, PACman forums and google i could find something like this!
any help would be great
i used two versions of pacman and i flashed it 2 times with the same result
please, someone help me with this
Thanks
Click to expand...
Click to collapse
If you are flashing the 4.3 pacman ROM, then try flashing the 0.84 radio from the link I posted above.....(worked for me on probam rom running jb 4.3.1)
Thanks to
audit13 said:
For those flashing KK roms, are you using the latest radio?
Click to expand...
Click to collapse
I am using RR official ROM latest build and not getting fingerprint option in settings and also u touch is not working when I Fashed the ROM it was working but suddenly yesterday night it stopped. Please help me to find its hardware issue or software.
Rithik jain.com said:
I am using RR official ROM latest build and not getting fingerprint option in settings and also u touch is not working when I Fashed the ROM it was working but suddenly yesterday night it stopped. Please help me to find its hardware issue or software.
Click to expand...
Click to collapse
I'd try using ZUI and checking out if it works or not. This happened to me and it was a hardware issue so best of luck.
Borja Viera said:
I'd try using ZUI and checking out if it works or not. This happened to me and it was a hardware issue so best of luck.
Click to expand...
Click to collapse
Can you tell how much time they(service center people) took to fix it
Rithik jain.com said:
Can you tell how much time they(service center people) took to fix it
Click to expand...
Click to collapse
I haven't sent it, and I haven't talked with them either so I can't really tell.
I have used resurrection remix for several months & it was perfect, now using Lineage OS & finger print is working fine in it too. Issue is not with nougat based roms, you should troubleshoot in other ways.
Tani2 said:
I have used resurrection remix for several months & it was perfect, now using Lineage OS & finger print is working fine in it too. Issue is not with nougat based roms, you should troubleshoot in other ways.
Click to expand...
Click to collapse
OK I think its hardware issue.