Hi,
I have my 6P now for two weeks, and for the looks I'm rocking it only with a screen protector and a white carbon dbrand skin.
So I am pretty careful with the phone.
The problem is that the phone already shows signs of wear, to be more specific:
It already has notches in the plastic between the screen and the camfered edges.
The plastic seems to be very soft. The only possible scenario where I can imagine to picked up the notches is while having it in a car holder(also made out of plastic).
Does anybody else has the same problem?
Can you post a picture of this issue?
wish i could help but like above pics would help as don't know what it could be. Been naked and then to dbrands and have no issues
I can confirm these issues. I'm on my 4th RMA because of this issue. My first device has a chip on the plastic piece by the power button, second device had what looked to be the mate finish wore off and a dead pixel on the display, the third device had the same thing and a strong pink hue on the bottom of the display, and now I'm waiting on my 4th RMA. By the way if this one is messed up I'm going to stick it out with my first device because the display on this device is perfect! You can also see a big difference in the display from the RMA units. The panel looks black when off like my GS6 but the RMA's I've had looked dark grey when off and not black. The plastic piece that sits between the display and metal seems to be an issue Google is tracking so hopefully it gets fixed. I have a white 64gb 6P if that helps. I did have pics of all the issues because I had to send them to Google for proof but I erased them. Sorry
Sent from my Nexus 6P using Tapatalk
brent4atchley said:
Hi,
I have my 6P now for two weeks, and for the looks I'm rocking it only with a screen protector and a white carbon dbrand skin.
So I am pretty careful with the phone.
The problem is that the phone already shows signs of wear, to be more specific:
It already has notches in the plastic between the screen and the camfered edges.
The plastic seems to be very soft. The only possible scenario where I can imagine to picked up the notches is while having it in a car holder(also made out of plastic).
Does anybody else has the same problem?
Click to expand...
Click to collapse
I have this issue with mine. That plastic strip that goes around the screen got rip or broke in my Nexus 6P is flimsy and is coming off. I had my phone from launch week 1. Does warranty cover this? Is some minimum but for my OCD this issue is killing me.
Sent from my Nexus 6P using Tapatalk
The plastic part on my phone came from Google with dents and scuffs in it.
I have this issue also.
The plastic is quite fragile. My damage was caused by the Google nexus 6P case...
Have pics but cant post em because first post.
The black rubber like piece between the glass and case is coming off on my Nexus 6P. I've had the phone in the Genuine Official Nexus 6P Leather Folio Case Flip Cover since almost day one, so I'm a bit surprised after about 2years of use Build Number N2G470.
My answer was simple to this. Wanted a black and silver nexus 6p and when I removed the back to change it I noticed how flimsy the plastic was and was dented and cracked in places. So I took a razor blade when the phone was back together and removed the plastic all from around the edges and it now looks slot better. I did try and buy a mid frame before doing this as my LCD was perfect. But couldn't find one. Much better look now and the phone now looks brand new again and my ocd is at bay. Lol.
Plastic Filler
DANIELWHITT said:
My answer was simple to this. Wanted a black and silver nexus 6p and when I removed the back to change it I noticed how flimsy the plastic was and was dented and cracked in places. So I took a razor blade when the phone was back together and removed the plastic all from around the edges and it now looks slot better. I did try and buy a mid frame before doing this as my LCD was perfect. But couldn't find one. Much better look now and the phone now looks brand new again and my ocd is at bay. Lol.
Click to expand...
Click to collapse
Doesn't that plastic filler strip (between glass and aluminum chassis) act as a retaining ring to hold in the glass? I have not taken my phone apart, but that thin black plastic piece has broken in several places (with sections missing). I assumed it acts like a snap ring in the groove to retain the glass screen. Am I wrong? Is it just a for aesthetic purposes?
Does anyone know if Google recognizes this as a defect and fixes it for free? Or.... can I remove the remaining pieces and use the phone without it?
It doesn't hold the screen in. It's designed to act as a buffer between the glass and the frame to help stop the glass crack or smash if you drop it. It's actually part of the mid frame attached to the glass. Mine did what yours did, hence when I put the new housing on, I trimmed it down with a razor blade level with the rear housing and it made it look so much better, while still doing good the job of helping stop the glass from cracking when dropped. To be honest, once a case was on the phone you couldn't tell anyway, also Google doesn't see it as a defect, just part of wear and tear. I tried a defect claim and they said no as it was damage I had caused, even though mine happened from taking it in and out of my spigen case on a few occasions. Hope that helps.
---------- Post added at 08:25 PM ---------- Previous post was at 08:23 PM ----------
Also, you need to slide a slim pry tool between that plastic and the metal frame to remove the back. It's not in a ridge its part of the midframe of the phone.
Related
Have any of you experienced any discoloration on the soft "rubber" like portions of the G2? I'm always really careful with the phone, and it's in a leather case full-time. However, I just noticed that I've got a black mark on the bottom of my phone; looks like the finish is wearing off.
I started getting a black mark on mine (before I got my replacement). I attributed it to the black dye on the inside fabric from my Cellet holster. I could get it off either.
I have since gotten a replacement (for a different issue), applied a full body skin, and switched to a holster with a grey interior.
The soft molded plastic parts of my phone are turning a yellowish green. It is happening most around the volume rocker and power switch. There's a topic at the T-Mobile forums about this. One person posted pictures of their phone and it is really bad.
A lot of other G2 owners are reporting the same thing.
I remember a while back someone posted pics of their brand new replacement G2 next to their used G2 and a lot of people commented on the color difference, wondering if something changed between the newer models. But it looks like these phones discolor badly after a while.
This sucks.
I had returned a G2 that turned a little greenish on me. I think it happened when I placed My G2 on top of my hot computer. I would also keep it away from heat and harsh chemicals such as alcohol.
I received a replacement one, and I installed zagg full body invisible shield on it.
Hmm. I don't have mine in a case.. Its usually in my hand, my front pocket (alone) it sitting on my desk or a table. I've not noticed any color issues. Sounds like the cases are doing it. Planning on getting Invisible shield put on mine but wondering if it makes it harder to hold on to? Too slick? I like the kind rubbery feeling, makes it stick in my hand better.
Sent from my T-Mobile G2 using Tapatalk
The invisible shield fullbody has a glossy film. If your hands are oily it will feel a little slippery. The it covers the G2 about 95%. The only part uncovered is the gray area around the keyboard.
The screen protector included with the invisible shield is terrible. There are some indention marks on the film from coins and pens on my pocket. It is scratch proof but not wrinkle or dent proof. If viewed on an angle, It makes me want to rip off the screen protector. I prefer the kinda matte finish screen protector that you could get from tmobile.
In addition, I would also avoid the black rubber snap on case you get from tmobile. The back case is so thick that the opening for the camera act as a funnel for keys and coins. I had a nasty horizontal gash on my camera screen on my first G2.
Bishybob said:
The soft molded plastic parts of my phone are turning a yellowish green. It is happening most around the volume rocker and power switch. There's a topic at the T-Mobile forums about this. One person posted pictures of their phone and it is really bad.
A lot of other G2 owners are reporting the same thing.
I remember a while back someone posted pics of their brand new replacement G2 next to their used G2 and a lot of people commented on the color difference, wondering if something changed between the newer models. But it looks like these phones discolor badly after a while.
This sucks.
Click to expand...
Click to collapse
I was the one that posted those pictures.
Does any one know any way to go about getting a replacement, I was an early adopter and pre ordered mine on sept 27th... and received it October 1st. My remorse period has passed a while ago and anyway I only started noticing this problem after my remorse period ended.
My hinge is okay and the random reboots were solved with the update. There are really no complaints besides this ridiculous discoloration.
http://forums.t-mobile.com/t5/T-Mobile-G2/G2-Discoloration/m-p/523792#M17474
I've noticed with my friend's G2, I got mines a week later, put the full body sealth sheild on it and mines not wearing out but his looks lighter than mine. And also he doesn't seem to have the yellow spots next to his keyboard while I do. WTF?
For anyone experiencing this issue a fix:
Take some q-tips, a cap of bleach, and a cap of hydrogen peroxide.
Dip a q-tip in the bleach cap, and blot it on a napkin. Rub the q-tip on the discolored rubberized parts of the phone, and let it dry. Take another q-tip, and dip in the hydrogen peroxide, and blot on a napkin. Rub the q-tip on the discolored rubberized parts of the phone.
Rinse, and repeat the procedure above until you are satisfied with the result. You should begin to notice that the "rubberized" parts of the phone you are working with will feel more "rubbery" again, instead of smooth.
Buy yourself a case for your G2, a screen protector, and enjoy.
I purchased a Skinomi screen protector for my Nexus 10. Once I received it and realized that I had to use this solution to apply it, I got very concerned about getting solution inside the device due to the huge speaker openings running down both sides of the N10. It seems to me that it would be virually impossible to avoid solution getting into those speaker openings.
Has anyone applied a Sknomi protector to a Nexus 10? Or does anyone have any suggestions on doing this safely? I wrote to Skinomi and got a useless canned reply.
I LOVE this tablet BTW! I've had an Acer Iconia A500 since April of 2011. The difference between that and the Nexus is incredible!
FWIW, I have no screen bleed. No issues at all. My only complaint is Google removing the easy menu item for muting notification sounds (Honeycomb had this). Now you have to go all the way into settings to do this or you get email/game pings while listening to music or playing videos. Really lame to remove a nice feature from a supposed upgrade.
You can try taping over the speaker grills. There's enough clearance to apply clear tape on there. I used Skinomi on my previous tabs like Gtab 10.1 and Prime. Since then I have been going naked and haven't had any problems since. I even let my 5 year old daughter use my N10 without any scratches on my screen.
Sent from my Nexus 10 using Tapatalk HD
jjdevega said:
You can try taping over the speaker grills. There's enough clearance to apply clear tape on there. I used Skinomi on my previous tabs like Gtab 10.1 and Prime. Since then I have been going naked and haven't had any problems since. I even let my 5 year old daughter use my N10 without any scratches on my screen.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
I thought about tape, but in my experience, tape is not very good at sealing out liquids. I think I'm going to send the Skinomi back and wait for PosRus to come up with one for the Nexus 10. I love PosRus screen protectors.Thanks for the reply!
I used to put screen protectors on all my gadgets with a screen but then I came to my senses and realized, what's the point? It adds a rubbery layer that takes away from the smooth feeling of the screen and degrades the image quality slightly. The screen is made of Gorilla Glass which is pretty resistant to scratches unless you stab it with a knife. I would say just go naked.
FYI, you don't spray the solution directly on the device, you mist it onto the protector (not a lot). You then squeegee it out towards the sides without the speakers while holding a cloth at the edge to catch the runoff. There shouldn't be a whole lot of liquid anyways to be a concern even if you do get some over the speakers.
zero383 said:
I used to put screen protectors on all my gadgets with a screen but then I came to my senses and realized, what's the point? It adds a rubbery layer that takes away from the smooth feeling of the screen and degrades the image quality slightly. The screen is made of Gorilla Glass which is pretty resistant to scratches unless you stab it with a knife. I would say just go naked.
FYI, you don't spray the solution directly on the device, you mist it onto the protector (not a lot). You then squeegee it out towards the sides without the speakers while holding a cloth at the edge to catch the runoff. There shouldn't be a whole lot of liquid anyways to be a concern even if you do get some over the speakers.
Click to expand...
Click to collapse
Lots of support for naked here I see! LOL
OK...I'm thinking about it. Thanks for the input.
Hiya guys,
I was just wondering if anyone else has either used xoskins or xtreme guard protectors and been left feeling disappointed? I originally had an SGP ultra on my nexus 4 but I was feeling a little annoyed that it didn't cover the full screen. Other than that they're perfect, nice screen hardness difficult to scratch and leave the screen looking amazing. I really thought the xoskins one would be perfect so I paid the price and ordered (shipped from US to UK).
Finally arrived, installed straight away. Let me just say I've fitted lots of screen protectors before to various phones and I'm pretty good at it. So much so friends and family ask me to do theirs for them. Still, the xoskins one felt a little fiddly. The solution they provide makes it very slippy, so using the squigy afterwards made it squirm around which was annoying. Also, even though both sides were wet the squigy still left slight burns after only 3-4 swipes. It took a full 48 hours for it to dry.
The cut on the protector was good, and it was nice and clear. It seemed to leave a slight orange peel effect across the screen though, and I had 4-5 thin rainbow type lines/scratches about 1cm long on the one side which were clearly on the underside of the protector (all perfectly straight and all facing down perfectly so I'm thinking manufacturing fault?). The feel of the protector was frankly awful. It flexes under finger and restricted swiping somewhat. Worst of all, any slight knock leaves imprints. I tested it by lightly rubbing my nail across it, it left a clear mark that was there for 2-3 days! It flexes way more than I'd like, I can't see it providing much protection from knocks tbh. Granted I wouldn't do this in normal usage but any other knocks left imprints too.
So I removed it, and thought I'd try the xtreme guard. My god, I've never used such a rubbish protector. The cut is dubious at best, the screen clearly looks worse when its on and it suffers from the same indentations and flexing as the xoskins ones.
Maybe I've been spoilt by the SGP ones (I still have the back protector SGP skin on there as its a perfect fit as its flat) or maybe all wet application protectors are like this to be more flexible for the curved glass?
Either way I've ordered another set of SGP protectors and I'll put up with the exposed edges. I'm sure there's people out there that are happy with their protectors, but I just wanted to share my experiences.
Wet applied screen protector can never compete with the dry one..even the $1 junk one.
I took off my Xtremeguard and using the junk that came with my nillkin case..which is still much clearer than the xtremeguard.
But I keep the back of xtreme since it make it less slippery.
Glad its not just me who found this then I can see how having a *stickier* back protector could be beneficial. The SGP one I have is still rather slippy. Hoping it will help strengthen the back though in case it has any accidents The SGP ones saved my iPhone 4 before. One was a drop from my ear onto a wooden floor!
It's nice to read that I am not the only one who dislike the Xtreme guard screen protectors.
I just cant believe how sticky it feels and how much it gets scratches and dents.
I've got a fillkin flip case comming my way as well so I think I'm also going to replace the front xtreme guard screen protecotr with the nillkin one.
One thing to keep in mind for all wet protectors is that when you need to push out the bubbles, never used a squeegee. It is very difficult to avoid burns on the surface with a squeegee. Instead wet your finger tips and push the bubbles out with your finger. Much easier and doesn't leave burn marks.
If you absolutely need to use a squeegee, the paper one provided by SGP (ironically) is pretty good for wet protectors. Use the corner as much as possible and don't push too hard.
I myself prefer dry protectors as well but there are indeed some good things about wet ones. They are very scratch resistant, provide more grip, and doesn't show finger prints as much.
The xo skin i have is trash the front has so many random Knicks and bubbles and stuff the back does too but I'm going to leave that on and just use these 3 for $5 screen protectors from amazon until the glass protector comes out with reviews
Sent from my Nexus 4 using xda app-developers app
I am using the XG and granted it has it's orange peel look to it, but I don't mind it. The look reminds me that I have a sp on and I can safely put the phone in my Seidio holster without looking. LOL.
Yes, the screen looks way better with a dry sp on, but I am happy with the cutouts and fitment. And plus doesn't affect the Diztronic Ultra hard case at all when taking off or putting on. Which is good IMO.
Am I 100% happy? No, I say maybe 96%. But for the price of 3 front and backs for 6 bux. I can't really complain too much.
Xtreme Guard are excellent. You just need to take your time applying it and pushing out the bubbles. Minimal orange peel and the protection is perfect around the curved edges.
After having mine on for nearly a week i'd still disagree. I have no bubbles or marks on the xg but it does have the black spots issue I've read about which suck! The cuts off on mine everything is aligned perfectly with screen edges but 1/4 of the camera lens is covered. Honestly its not how I fitted it. The feel is also pretty bad. I genuinely cannot wait until I get my new SGP ones.
Xoskins replied to my email about 4-5 days after I showed photos of the defects. They are sending me out a new protector at least. Will probably sell it on eBay to claw back some cash.
I'm not going to bother emailing xg as they're cheap and tbh I won't be going near their protectors again!
Sent from my Nexus 4 using xda app-developers app
The problem I had with XO Skins was that the protector for the back of my n4 had a little pin hole in it! Luckily they are replacing it free of charge, including shipping! Which is good cause I'm in the UK and did not want to pay to send it back to the US.
The protector for the screen however has been brilliant, I've had it for about two weeks on there and the sort of rubbery feeling goes away and it feels very similar to the glass on touch. If a little more squishy. It does not drag against my finger anymore.
As for bumps leaving marks, I've noticed that, but they always go away within about thirty seconds.
All the bubbles have disappeared on my screen and its very clear.
I definitely agree with the OP about the application process though, the solution makes it very slippery, which is good when trying to position the skin. But when using the squeegee to push out the air bubbles and liquid the skin moved everywhere. After that though, it dried family quickly, did leave it overnight anyway.
I'd say I'm pretty pleased with my XO Skins purchase.
Sent from my Nexus 4 using xda premium
Confused_Cheese said:
After having mine on for nearly a week i'd still disagree. I have no bubbles or marks on the xg but it does have the black spots issue I've read about which suck! The cuts off on mine everything is aligned perfectly with screen edges but 1/4 of the camera lens is covered. Honestly its not how I fitted it. The feel is also pretty bad. I genuinely cannot wait until I get my new SGP ones.
Xoskins replied to my email about 4-5 days after I showed photos of the defects. They are sending me out a new protector at least. Will probably sell it on eBay to claw back some cash.
I'm not going to bother emailing xg as they're cheap and tbh I won't be going near their protectors again!
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
That's no even possible.
Pics?
narta said:
That's no even possible.
Pics?
Click to expand...
Click to collapse
Why not? I'm talking about the front facing camera not on the rear. My SGP ones arrived this morning so the xg one was ripped off almost straight away so unfortunately I can't take you a photo to show you.
The cut was definitely off, there was some extra material right in the dip of the cut out that goes around the lens as if it hadn't been cut cleanly. The dip wasn't rounded like it should of been. Maybe I just got a bad one in this respect, but it shows there is very little quality control. Especially as mine also suffered from the same black spots I've seen elsewhere.
The bottom of the protector was literally up against the chrome rim, I couldn't of positioned it any lower so it wasn't due to bad positioning. It was just poorly made.
I've just ordered a Nillkin case which will hopefully help protect the bits of glass the SGP ones miss. The feel and screen clarity is so much nicer!
Well, xoskins replacement arrived today. It had been put into an envelope that has a bright blue lining and the edges of the protector now have a lovely blue haze. Great! It didn't even have a piece of card in to stop bending etc. so lucky it survived at all.
Not even worth trying to sell it, If I purchased one off ebay myself and it had this haze I'd be gutted. Really disappointed with them.
I did notice they seem to of changed the design too. My previous xoskins one had a U shaped cut out for both the front camera and the proximity sensor. This new replacement has O shaped holes for both so that there is something actually protecting the top edge all the way along.
That sounds like your first one was a case fit and your new one is a full skin. When I got a replacement it came sealed in a baggy, crazy. I would hit them up again.
stretched said:
That sounds like your first one was a case fit and your new one is a full skin. When I got a replacement it came sealed in a baggy, crazy. I would hit them up again.
Click to expand...
Click to collapse
The first one I had definitely went right up to the chrome edges on every part other than the top by the proximity sensor and camera where there was a U shape.
I'll drop them another email and see what happens. They can only say no.
Well, what can I say? I'm using the xg for the front and for the back of my nexus 4 and I'm very pleased with it. I have them on for about 2 weeks now and everything is well..
The cut of the xg protector is one of the best out there. In my past galaxy nexus I used a clear screen protector and every 2 months I had to change it with a new one because of the dust that got under it... Causing to many bubbles.
That's not the case with the xg protector. This thing is not going anywhere.. And I also use it with the official LG bumper case with no problems..
I'll try to upload some pictures for you to see.. The only disadvantage is that the feel of the xg protector is worst from other clear screen protectors, using the dry install method.
Στάλθηκε από το Nexus 4 μου χρησιμοποιώντας Tapatalk 2
narta said:
That's no even possible.
Pics?
Click to expand...
Click to collapse
I agree. You must have a defective one. My second set has all the correct cutouts. Here's my with the XDA case with XG front and rear protector on. The link is to the front.
http://forum.xda-developers.com/showpost.php?p=36718215&postcount=7
I just noticed a few scratches that I'll have to live with.. Maybe I'll have to buy a case now (thought going naked would have been fine)
I know there are plenty of topic on this, but most cover actual defects.
Btw, just wanted to say that I LOVE this device. No way I'm returning. Not even this unit! Can't! Spent soo much time customizing it, and even the benchmarks are slightly above average
Anyway... My problem right now is the chamfered edges and the bottom speaker grill.
The silver One is susceptible to the same amount of scratches as the Black One, albeit they won't be as prominent on the silver variant.
The unit I'm talking about is actually a replacement. The first One I owned had defects, but even for the short time I had it, it somehow managed to build a few dents and scuffs on the chamfered edge up at the top speaker grill.
This time, the problem's on the bottom! I have a few scuffs on the bottom chamfered edge... It's been 4 days in my possession, and already is growing hits and dings. Now here's the interesting part.. As a university student, school's out and the phone has pretty much left the house only once! Other days it laid either in my hand, on my pocket, or on the floor right by my bed.
I looked at it and thought that maybe I can polish them when they get worse.. But things took a turn for the worse right away!! As I was examining the scuffs on the edge, I came across a hairline scratch that extended from the bottom of the lower speaker grill to the top (of the speaker grill) -- almost like a crack -- a hairline crack. Looks as if a pencil lightly went over it.
I've attached photos for your viewing pleasure, but as minor as they appear, note that it's only been about 4 days!! I'm wondering what'll come out of it over an extended period of use.. Guess I can live with whatever has happened to date though =]
*please note that the images aren't too good a representation of the actual damage to the device. It's slightly worse in person -- the abundance of light blurs the scratches a bit.
Arghhh the photos have since showed less of the damage as I had to resize the images to 640* 425 (instead of 4288 * 2848 )
To me, it's just like a dead pixel. You can't tell it's there in normal use, but once you find it, it'll haunt you for a while. At one point you won't care.. But when you see it again, you'll start kicking yourself.
I've been babying my phone, but I think it's time for me to go up onto Amazon and buy myself a good case. *flies to look at the Accessories forum*
Any of you folks keeping your phone naked experience any unexplained scuffs and nicks on your edges? Scratches on your speaker grill?
You guys think that we'd be able to -- at some point -- replace the speaker grills with OEM parts? I'm sure people will come across much worse problems...
No matter what device, what manufacture or what materials the device is made out of, if you don't use a case, this will happen and worst. Your scratches are barely visible. I had to zoom in the picture to see them.
I don't have the device yet but I already have 3 cases for it and a pack of screen protectors. The official flip case and 2 tpu s line cases, one black and one clear.
Sent from my HTC myTouch 4g using xda premium
I agree. I guess it's just that I'm bummed it happened so soon!
I'll learn to live with this. I don;t think I'm ready for a case just yet. The cases I've seen so far don't look too good and add way too much bulk. The slimmer ones don't cover the top and bottom chamfered edges...
I'll keep looking. I do have full body screen protection, except it only covers the screen itself and the rear of the device. Speaker grills (understandably) are left to be in the open
Did you check the phone over when you got it? Just asking as I've seen a one or two with some nicks and scratches out of the box I'm guessing it happened when polishing the chamfered edge.
Man, how do you use your phone to manage to put these scratches and dents.
I have had the phone since last Friday with daily use and no scratches, I just put a skinomi clear film in the back to protect against scratches and dents, the front is naked, looks beautiful, you don't even notice the film is there
Sent from my HTC One using Tapatalk 2
I have films on the back and front of the device myself!
I honestly do not know where these came from. It's been on my desk or on the floor by my bed. Hasn't left the house -- maybe just once..
Anyway I attached another saddening photo. This was taken with my old Atrix.
I'm thinking that this may have been a result of missing the charging port and accidentally sliding the micro usb plug into the front of the phone while I was half asleep...
Anyway, I'm sitting here and there's much greater things to worry about. It could have been much worse... A random scratch on the screen or a deeper nick...
Besides, the bottom speaker grill is a separate piece and if it continues to get scratched up and continues to bother me, I'll just see if i can get it replaced..
Hope I actually move on. This is the same feeling as when I found a dent on my $700 guitar.. I got over that. So ill probably get high over this
Aha I'm wondering what it'll feel like when I find a small scratch on my first new car -_-... Boy will I be a mess!
Sent from my HTC One using xda premium
Aluminum is a soft metal, unlike titanium or other harder metals. They chose aluminum because it is light weight.
So do you think black is more durable? I'm going to buy One today so I might considering buying black instead if thats the case.
Btw usually stratches goes away when wiped properly. At least do on my black One S. Dents, however, stays forever.
muayyadf1 said:
Aluminum is a soft metal, unlike titanium or other harder metals. They chose aluminum because it is light weight.
Click to expand...
Click to collapse
Yep. But I'm hoping that maybe next year they make the switch to a harder metal like steel... The OPPO Find 5 allegedly has a steel frame construction. Sure it's heavy, but if they get the right look, whatever! Durability should be of more importance than weight..
Now if it does weigh too much, maybe implement the steel construction only around certain areas...
I'm aware this will pull up costs, but the device would be that much better!
Dharkan said:
So do you think black is more durable? I'm going to buy One today so I might considering buying black instead if thats the case.
Click to expand...
Click to collapse
There's another thread about scuffs on the black edition. Maybe I've got too far... You can't see this if you're not looking for them, but to me they'll always be there.
I've seen multiple accounts of folks on here see through their black paint into the aluminum underneath.. You'd want to avoid that.. So I don't regret having the silver edition.
They both scratch the same amount, but the black shows more..
Good luck and I hope you enjoy your One just as much as I am!
Choose the device that also to you more! If you like the stealthy black, but that! But if you do, go for the Poetic Atmosphere case.. Looks pretty nice on the black variant.. The silver one.. Not so much.
Still going to look for a case, but it isn't my priority.. I'd rather keep the phone naked and enjoy the cool feel everyone I touch it in the morning!
Dharkan said:
Btw usually stratches goes away when wiped properly. At least do on my black One S. Dents, however, stays forever.
Click to expand...
Click to collapse
I've wipes this, took a moist set of wipes below the actual holes, but nothing. There is a scratch, not a surface scratch, it's slightly deeper.
100% sure this ain't going away.. But i haven't lost all hope! As this phone e grows in popularity, some ebay sellers will manage to get their hands on some grills and they should be replaced rather easily since they're in there only via an adhesive. Would have been more ticked off if it was on the screen, on the chamfered edge off of the back, or even on the back itself..
Here's hoping the grills are replaceable and I can do something about it in maybe 6 months!
Sent from my HTC One using xda premium
I had mine with no case for almost 1 week and not a single scratch
Sent from my HTC One using xda app-developers app
No idea what to say. I'm keeping it naked. Maybe this was from the factory.. I don't see how you can get a scratch from the bottom to the top of a grill without taking your phone out much...
Maybe I didn't notice this before, but i still am worried about the durability of the device. If pocketnow reports bad durability, then I've got no option but to go with a case. Right now i dont even know where these came from.. No sand in my room, no hard metals that would easily scratch anodized aluminum..
It really IS a mystery...
Sent from my HTC One using xda premium
yes the part which worries me the most is the possibility of hardshell covers actuall doing damage as you attempt to place them
this is why HTC's own double flip / dip are actually a lot softer to install
this exactly why im sticking to slim transparent rubber covers
hamdir said:
yes the part which worries me the most is the possibility of hardshell covers actuall doing damage as you attempt to place them
this is why HTC's own double flip / dip are actually a lot softer to install
this exactly why im sticking to slim transparent rubber covers
Click to expand...
Click to collapse
Tell me about it! When I bought snap on cases for my Atrix, the plastic around the phone was soo scuffed it actually looks nasty without a case. Definitely not making that mistake again!
I don't think tpu or hardshell plastic cases can really damage the aluminum bezel as aluminum is harder..
But it's still something I worry about and a case like the one you linked to is just perfect.
Sent from my HTC One using xda premium
WolfDale7 said:
Tell me about it! When I bought snap on cases for my Atrix, the plastic around the phone was soo scuffed it actually looks nasty without a case. Definitely not making that mistake again!
I don't think tpu or hardshell plastic cases can really damage the aluminum bezel as aluminum is harder..
But it's still something I worry about and a case like the one you linked to is just perfect.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
it's not the aluminum i'm worried about
hamdir said:
it's not the aluminum i'm worried about
Click to expand...
Click to collapse
Oh Crap. Overlooked that!
Wow..
Kay so time to look for a similar case to the one you've got
I want to keep the beauty of the HTC One visible while still protecting it from further scratches...
Everything over on the accessories forum doesn't really cut it go me :/...
I'll go to this mall that pretty much just sells phone cases and phones. Hopefully I find a store that has what I want for a reasonable price
Sent from my HTC One using xda premium
WolfDale7 said:
I agree. I guess it's just that I'm bummed it happened so soon!
I'll learn to live with this. I don;t think I'm ready for a case just yet. The cases I've seen so far don't look too good and add way too much bulk. The slimmer ones don't cover the top and bottom chamfered edges...
I'll keep looking. I do have full body screen protection, except it only covers the screen itself and the rear of the device. Speaker grills (understandably) are left to be in the open
Click to expand...
Click to collapse
Probably the thinnest, plastic case around. does not add bulk like otter cases do. you should check it out...
http://www.bestbuy.com/site/Platinu...&st=platinum series case htc one m7&cp=1&lp=1
Also, it's aluminum. Whoever thinks aluminum, a softer metal, won't scratch, is lying to themselves.
hamdir said:
yes the part which worries me the most is the possibility of hardshell covers actuall doing damage as you attempt to place them
this is why HTC's own double flip / dip are actually a lot softer to install
this exactly why im sticking to slim transparent rubber covers
Click to expand...
Click to collapse
I feel you but the cheap TPU's will scratch phones too. Only cases I have found to never ever scratch a phone are Otterbox has a combo silicone tpu which is very soft and nonabrasive unlike normal tpu. Capdase Aluminum cases they are soft touch silicone on the inside will never ever scratch. And last my old friend Incipio their double layer cases have a soft touch silicone also that will not scratch the phone.
nullkill said:
I feel you but the cheap TPU's will scratch phones too. Only cases I have found to never ever scratch a phone are Otterbox has a combo silicone tpu which is very soft and nonabrasive unlike normal tpu. Capdase Aluminum cases they are soft touch silicone on the inside will never ever scratch. And last my old friend Incipio their double layer cases have a soft touch silicone also that will not scratch the phone.
Click to expand...
Click to collapse
how will a rubbery cover scratch it? you mean if it falls?
hamdir said:
how will a rubbery cover scratch it? you mean if it falls?
Click to expand...
Click to collapse
No TPU is not rubbery its more like flexible hard plastic. If the case fits well the TPU material will scratch the phone from taking it off putting it back too much. If anything get in between the phone and the case game over it's almost worse than naked. It's sold as rubber like or soft but I have 20 different TPU cases and all are the same crap. Otterbox and the others I mentioned use silicone which is like a soft rubber. TPU is a cheap is injected crappy material that is why you will find cases as low as $5 or lower.
each time I take my nexus 6p out of Spigen Rugged Armor case I am noticing tiny white dots which appears to be metal scrapping off from back and there are no signs of physical damage at all. device never dropped and I never keep it without case.
Please advise how to prevent and fix this issue and if anyone else is also facing the similar issue.
Your case is the exact reason for it happening. I used my 6p for like 3 months completely naked and it was in perfect condition. As soon as i started using case scratches began showing up on the back. The way i see it, some particle of dust or dirt gets inside the case, and because its so tight, its able to actually scratch the surface of metal.
Yes, its lint, dirt between the case and with the pressure like being in your pocket, I don't have a hard case so its not a big issue,
Should of gotten the aluminium version if it worried you.or get a skin wrap to add another layer.
I take my phone out and clean the case often. Being transparent I can see when it needs a clean.
This has never happened to my earlier phones, metal quality is really bad on this phone, best quality cases are causing issues, if i keep it woth case it'll turn into a dented metal piece in no time
willi9070 said:
This has never happened to my earlier phones, metal quality is really bad on this phone, best quality cases are causing issues, if i keep it woth case it'll turn into a dented metal piece in no time
Click to expand...
Click to collapse
First of all its not bending, its scratching the paint. Metal is fine, its the paint. Secondly just sell it if its such a big deal to you. Happened many times to me on different devices, nature of alluminium.
I have used my earlier phones for 3-4 years and they still don't have any visible scratches and nexus 6p being a premium phone has visible marks in just 4 months with gentle use and no falls, this is what i am not liking about this
Maybe you didnt use metal phones then? Cause i had htc one m8 which had briliant build quality, and sadly it was same story, full of scratches, because alluminium. Tho it wasnt visible so well, cause of silver color.
I experienced the same with a black One M7, and noticed the same with friends' iPhone ( except for the 6S' aluminum which is more durable).
Therefore I got a Silver 6P and only use Google's soft case when going to the seaside. No chipping on the back or sides, so far.
Skickat från min Nexus 6P via Tapatalk