Boot into OS When Power is Plugged in Lollipop 5.1.1 - Nexus 7 Q&A, Help & Troubleshooting

Hey Guys,
I am very new here but have been seeing alot of helpful stuff on this massive forum. A bit about my self.
1st, i am not a developer - Just nosy and love some things you guys can do to Android Devices.. Android FTW
My name is Mike aka DJROETZ from South Africa. Will update my details as soon as i can.
The Question?
I have an unlocked and rooted Nexus 7 (2012) 3G Lollipop Update 5.1.1 ,I have been reading alot but i just cant seem to find where to put this info in to boot the device from dead and into the OS without pressing the power button. Im sure i am missing something small.
Could you guys maybe shed some light.
The Code Below i need to look for.
fastboot getvar all
(bootloader) product: herring
(bootloader) version-hardware: REV 51
(bootloader) version-baseband: I9020XXKB1
(bootloader) version-bootloader: I9020XXKA3
(bootloader) secure: yes
(bootloader) unlocked: yes
(bootloader) off-mode-charge: 1
all:
finished. total time: 0.004s
and then
Code:
fastboot oem off-mode-charge 0
The Code i get when inputting fastboot getvar all
(bootloader) version-bootloader: 4.23
(bootloader) version-baseband: 1231_0.18.0_0409
(bootloader) version-hardware: PR
(bootloader) version-cdma: N/A
(bootloader) variant: tilapia
(bootloader) serialno: 015d46d95167fe07
(bootloader) product: tilapia
(bootloader) secure: no
(bootloader) unlocked: yes
(bootloader) uart-on: no
(bootloader) partition-size:bootloader: 0x0000000000600000
(bootloader) partition-type:bootloader: emmc
(bootloader) partition-size:recovery: 0x0000000000c00000
(bootloader) partition-type:recovery: emmc
(bootloader) partition-size:boot: 0x0000000000800000
(bootloader) partition-type:boot: emmc
(bootloader) partition-size:system: 0x0000000028a00000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:cache: 0x000000001bb00000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:userdata: 0x00000006fff00000
(bootloader) partition-type:userdata: ext4
all:
finished. total time: 0.250s
Please let me know what i am missing..
Your help will be much appreciated.

Actually,
Just put this in fastboot oem off-mode-charge 0
And seems to be working 100s.

Related

Fastboot command, would anybody be so kind?

Hi all,
I'm looking for someone who already owns a Nexus 7 and has some little spare time.
I need the output of the following command when the Nexus is in fastboot mode: fastboot getvar all
Why do I want to know? I'm planning to code a little programm which should check if the bootloader is unlocked and some other little things.
Thanks in advance,
Lunch
*push*
Sent from my GT-I9300 using Tapatalk
Lunchbox115 said:
Hi all,
I'm looking for someone who already owns a Nexus 7 and has some little spare time.
I need the output of the following command when the Nexus is in fastboot mode: fastboot getvar all
Why do I want to know? I'm planning to code a little programm which should check if the bootloader is unlocked and some other little things.
Thanks in advance,
Lunch
Click to expand...
Click to collapse
Here, I removed the serial number, if you really really need it we can talk about it in PM.
Code:
(bootloader) version-bootloader: 3.34
(bootloader) version-baseband: N/A
(bootloader) version-hardware: ER3
(bootloader) version-cdma: N/A
(bootloader) variant: Not defined yet
(bootloader) serialno: <snip>
(bootloader) product: grouper
(bootloader) secure: no
(bootloader) unlocked: yes
(bootloader) uart-on: no
(bootloader) partition-size:bootloader: 0x0000000000600000
(bootloader) partition-type:bootloader: emmc
(bootloader) partition-size:recovery: 0x0000000000c00000
(bootloader) partition-type:recovery: emmc
(bootloader) partition-size:boot: 0x0000000000800000
(bootloader) partition-type:boot: emmc
(bootloader) partition-size:system: 0x0000000028a00000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:cache: 0x000000001bb00000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:userdata: 0x000000035cd00000
(bootloader) partition-type:userdata: ext4
Thanks, that's exactly what I need.
Thank you!

bootloader unlock data unavailable

I have India version unlockable moto g4 plus. While I was tried to unlock bootloader I got bootloader unlock data after fastboot oem get_unlock_data command. Anyone help me to get solution?
Did you enable "USB Debugging" and toggle "Allow OEM Unlock" in "Developer Options" before doing your fastboot commands?
yes i checked all these options. thanks
The command from Motorola site to get the code should work on any phone, even the subsidized ones.
Moto won't release the key for Amazon subsidized ones, but you always read the code.
did you ever fix this? i have the same problem
mahesvr said:
yes i checked all these options. thanks
Click to expand...
Click to collapse
Do you know you need to copy that long command on notepad and remove all spaces and other words.
You only need to keep that long number and alphabet list without spaces and than paste it in Moto site:good:
Have you solved this problem? I have the same problem.
j_cesarbm said:
Have you solved this problem? I have the same problem.
Click to expand...
Click to collapse
If you're getting unlock data unavailable after using the fastboot oem get_unlock_data command, then you might have better luck submitting a post over at the Motorola forums: https://forums.lenovo.com/t5/forums/v3_1/forumtopicpage/board-id/230/thread-id/2654/page/1
Please read the initial post of that thread, and submit the information that is requested (the output of fastboot oem get_unlock_data and fastboot getvar all). Hopefully someone from Motorola should contact you and help you resolve the issue.
echo92 said:
If you're getting unlock data unavailable after using the fastboot oem get_unlock_data command, then you might have better luck submitting a post over at the Motorola forums: https://forums.lenovo.com/t5/forums/v3_1/forumtopicpage/board-id/230/thread-id/2654/page/1
Please read the initial post of that thread, and submit the information that is requested (the output of fastboot oem get_unlock_data and fastboot getvar all). Hopefully someone from Motorola should contact you and help you resolve the issue.
Click to expand...
Click to collapse
I am trying to unlock Bootloader from my device, however I get the following message. I am desperate !! Thank you
fastboot oem get_unlock_data
(bootloader) Unlock data:
(bootloader) Unlock data unavailable
(bootloader) Failed
OKAY [ 0.125s]
finished. total time: 0.125s
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8953-C0.CD
(bootloader) product: albus
(bootloader) board: albus
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: 5
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB SAMSUNG RC14MB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=5F
(bootloader) cpu: MSM8953
(bootloader) serialno: 0038392474
(bootloader) cid: 0x0000
(bootloader) channelid: 0x00
(bootloader) uid: 549BA60500000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 534773760
(bootloader) reason: Volume down key pressed
(bootloader) imei: 355644084608195
(bootloader) meid:
(bootloader) date: 09-14-2017
(bootloader) sku: XT1710-07
(bootloader) carrier_sku:
(bootloader) battid: SNN5983B
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Fri Jan 9 6:36:38 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/albus/albus:8.0.0/OPSS27.
(bootloader) ro.build.fingerprint[1]: 76-12-25-15/13:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.341.13.albus.reta
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband[0]: M8953P_41.50.07.63.02R ALBUS_BRAZILDSD
(bootloader) version-baseband[1]: S_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g6c0cc6c (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Thu Feb 7 06:11:12 CST 2019
(bootloader) sbl1.git: git=MBM-NG-VC0.CD-0-g4650d8f
(bootloader) rpm.git: git=bd19194
(bootloader) tz.git: git=e4ac270-dirty
(bootloader) devcfg.git: git=e4ac270-dirty
(bootloader) keymaster.git: git=e4ac270-dirty
(bootloader) cmnlib.git: git=e4ac270-dirty
(bootloader) cmnlib64.git: git=e4ac270-dirty
(bootloader) prov.git: git=e4ac270-dirty
(bootloader) aboot.git: git=MBM-NG-VC0.CD-0-g361b83a
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: unknown
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.053s
j_cesarbm said:
I am trying to unlock Bootloader from my device, however I get the following message. I am desperate !! Thank you
fastboot oem get_unlock_data
<snip>
finished. total time: 0.053s
Click to expand...
Click to collapse
Thanks - again, the only place that can really help you is Motorola (and I've seen that you've posted over there). Once Alphadog sees your message, your case should be escalated up. Hopefully you'll be able to get your Z2 play unlocked, though it may take some time. Also, looking through your log, seems that there's no entry for ro.carrier, which might be causing the issues. However, we'll have to wait for Motorola to assist. Good luck.
Bootloader unlock data unavailable
I am unable to unlock bootloader of my device Moto e5 plus -(XT2924-3)Hannah
Please help me
C:\adb>fastboot devices
ZF6222V57X fastboot
C:\adb>fastboot oem help
(bootloader) config...
(bootloader) hw...
(bootloader) partition...
(bootloader) fb_mode_set
(bootloader) fb_mode_clear
(bootloader) bp-tools-on
(bootloader) bp-tools-off
(bootloader) qcom-on
(bootloader) qcom-off
(bootloader) unlock
(bootloader) lock
(bootloader) get_unlock_data
(bootloader) cid_prov_req
(bootloader) read_sv
(bootloader) off-mode-charge
OKAY [ 0.019s]
Finished. Total time: 0.027s
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8937-BF.55
(bootloader) product: hannah
(bootloader) board: hannah
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 4
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SKHYNIX HBG4a2 RV=08 PV=A5 FV=00000000000000A5
(bootloader) ram: 3GB SKHYNIX LP3 DIE=8Gb M5=06 M6=04 M7=00 M8=5F
(bootloader) cpu: MSM8937
(bootloader) serialno: ZF6222V57X
(bootloader) cid: 0x0000
(bootloader) channelid: 0x00
(bootloader) uid: A01DA8DF00000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
(bootloader) imei: 355528093905579
(bootloader) meid:
(bootloader) date: 07-11-2018
(bootloader) sku: XT1924-3
(bootloader) carrier_sku: XT1924-3
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sun Jul 28 10:22:49 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/ahannah/ahannah:8.0.0/OPP
(bootloader) ro.build.fingerprint[1]: S27.91-179-4/4:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.221.4.ahannah.ret
(bootloader) ro.build.version.full[1]: ail.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: M8937_26.30.05.75R HANNAH_APDSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g9ad2fe5 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Thu Mar 28 02:54:24 CDT
(bootloader) kernel.version[3]: 2019
(bootloader) sbl1.git: git=MBM-NG-VBF.55-0-g8ffb6ee
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=9692555-dirty
(bootloader) devcfg.git: git=9692555-dirty
(bootloader) keymaster.git: git=9692555
(bootloader) cmnlib.git: git=9692555
(bootloader) cmnlib64.git: git=9692555
(bootloader) prov.git: git=9692555-dirty
(bootloader) aboot.git: git=MBM-NG-VBF.55-0-g4e3d3ac
(bootloader) frp-state: no protection (144)
(bootloader) ro.carrier: unknown
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
Finished. Total time: 0.191s
C:\adb>fastboot oem get_unlock_data
(bootloader) Unlock data:
(bootloader) Unlock data unavailable
(bootloader) Failed
OKAY [ 0.020s]
Finished. Total time: 0.030s
Bootloader Unlock data unavailable Moto G5s Plus
echo92 said:
Thanks - again, the only place that can really help you is Motorola (and I've seen that you've posted over there). Once Alphadog sees your message, your case should be escalated up. Hopefully you'll be able to get your Z2 play unlocked, though it may take some time. Also, looking through your log, seems that there's no entry for ro.carrier, which might be causing the issues. However, we'll have to wait for Motorola to assist. Good luck.
Click to expand...
Click to collapse
My phone is motog5s plus. It also shows the same output despite my phone's cid is 0x0000 means bootloader can be unlocked.
(bootloader) Unlock data:
(bootloader) Unlock data unavailable
(bootloader) Failed
Please help me out. Went to the Motorola Service Centre, they said to replace the motherboard. Now that would cost high price which is not feasible.
I need to unloack bootloader because the phone's IMEI code is lost. Unable to put any calls. If there is another way to get IMEI code then it's good.
Ac3_DeXt=R said:
My phone is motog5s plus. It also shows the same output despite my phone's cid is 0x0000 means bootloader can be unlocked.
(bootloader) Unlock data:
(bootloader) Unlock data unavailable
(bootloader) Failed
Please help me out. Went to the Motorola Service Centre, they said to replace the motherboard. Now that would cost high price which is not feasible.
I need to unloack bootloader because the phone's IMEI code is lost. Unable to put any calls. If there is another way to get IMEI code then it's good.
Click to expand...
Click to collapse
Not a lot we can do sadly, if the motherboard needs replacing, then maybe you could see if an independent shop could do it for you?
I'm not sure how your IMEI got lost, did you buy the device used or did something happen to the device?
echo92 said:
Not a lot we can do sadly, if the motherboard needs replacing, then maybe you could see if an independent shop could do it for you?
I'm not sure how your IMEI got lost, did you buy the device used or did something happen to the device?
Click to expand...
Click to collapse
IMEI is lost after an update OTA. I believe it can be fixed if I downgrade from Oreo to Naughat with custom rom. But the phone is not showing oem unlock data at all. The phone is bootloader unlockable.
I am having a Motorola Moto G7 Amazon Subsidized Phone. I am unable to unlock the bootloader as not getting the unlock key and getting the same message as mentioned above:
(bootloader) Unlock data:
(bootloader) Unlock data unavailable
(bootloader) Failed
I too went to the Motorola Service Centre, they said to replace the motherboard. Replacing motherboard meaning spending an equal amount of money as spent on this one.
fastboot getvar all output is below:
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-river_retail-cf76a327f28-200930
(bootloader) product: river
(bootloader) board: river
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 6
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB SAMSUNG RH64AB RV=08 PV=05 FV=0000000000000005
(bootloader) ram: 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=5F
(bootloader) cpu: SDM632
(bootloader) serialno: ZF622xxxxx
(bootloader) cid: 0x0000
(bootloader) channelid: 0xc0
(bootloader) uid: A7C468A700000000000000000000
(bootloader) securestate: oem_locked
(bootloader) factory-modes: allowed
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 354xxxxxxxxxxxx
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 03-16-2019
(bootloader) sku: XT1962-6
(bootloader) carrier_sku: XT1962-6
(bootloader) battid: SB18C34005
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Dec 29 14: 0:35 UTC 2020"
(bootloader) ro.build.fingerprint[0]: motorola/river/river:10/QPUS30.52-
(bootloader) ro.build.fingerprint[1]: 16-2-7-4/e7923d:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full: <not found>
(bootloader) ro.build.version.qcom: LA.UM.8.6.2.r1-06600-89xx.0
(bootloader) version-baseband: M632_41.00.01.163R RIVER_APEMDSDS_CUST
(bootloader) kernel.version[0]: Linux version 4.9.206-perf+ ([email protected]
(bootloader) kernel.version[1]: oid-build) (clang version 8.0.12 for And
(bootloader) kernel.version[2]: roid NDK) #1 SMP PREEMPT Wed Sep 30 11:2
(bootloader) kernel.version[3]: 9:39 CDT 2020
(bootloader) sbl1.git: MBM-2.1-river_retail-315bc626c6-200930
(bootloader) rpm.git: MBM-2.1-river_retail-20f2cf34-200930
(bootloader) tz.git: MBM-2.1-river_retail-03d85fce32-200930
(bootloader) devcfg.git: MBM-2.1-river_retail-03d85fce32-200930
(bootloader) keymaster.git: MBM-2.1-river_retail-03d85fce32-200930
(bootloader) cmnlib.git: MBM-2.1-river_retail-03d85fce32-200930
(bootloader) cmnlib64.git: MBM-2.1-river_retail-03d85fce32-200930
(bootloader) prov.git: MBM-2.1-river_retail-03d85fce32-200930
(bootloader) aboot.git: MBM-2.1-river_retail-cf76a327f28-200930
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier: retin
(bootloader) current-slot: a
(bootloader) running-boot-lun: 0
(bootloader) running-slot: _a
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: No
(bootloader) slot-successful:_b: No
(bootloader) slot-bootable:_a: Yes
(bootloader) slot-bootable:_b: Yes
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
(bootloader) pcb-part-no: SB28C35906
all: listed above
finished. total time: 0.193s
>> fastboot oem unlock
...
(bootloader) fastboot oem unlock [ unlock code ]
OKAY [ 0.023s]
finished. total time: 0.025s
>> fastboot oem get_unlock_data
...
(bootloader) Unlock data:
(bootloader) Unlock data unavailable
(bootloader) Failed
OKAY [ 0.047s]
finished. total time: 0.047s
>> fastboot devices
ZF622xxxxxx fastboot
>> adb devices
List of devices attached
(shows nothing)
I have tried below command to get the unlock key from Motorola Website:
>> fastboot oem cid_prov_req
...
(bootloader) 0001dddddddddddddddd000000000000
(bootloader) 00000000000000000000000000000000
(bootloader) 00000000000000000000000000000000
(bootloader) 00000000000000000000000000000000
(bootloader) 000006ea3b1821784e881ce694286221
(bootloader) ecfe000100f0000100000062a7c468a7
(bootloader) 00000000000000000000000000000000
(bootloader) 00000000000000000000000000000000
(bootloader) 0000dddddddddddddddd000631313131
(bootloader) 31313131313131313131313131313131
(bootloader) 0000ffffffffffffffffffffffffffff
(bootloader) ffffffffffff
OKAY [ 0.048s]
finished. total time: 0.048s
But get the message as PUID is not found in the above string.
I have then tried getting UID from the getvar all command which is;
(bootloader) uid: A7C468A700000000000000000000
and tried different ways in combining the UID with the above string but failed to get the [unlock key]
I am not sure whether this way is correct or not since I have purchased the device from Amazon and I have read somewhere that amazon subsidized phones will not get the unlock key.
fortnightbattle said:
>> fastboot devices
ZF622xxxxxx fastboot
>> adb devices
List of devices attached
(shows nothing)
I have tried below command to get the unlock key from Motorola Website:
>> fastboot oem cid_prov_req
...
(bootloader) 0001dddddddddddddddd000000000000
(bootloader) 00000000000000000000000000000000
(bootloader) 00000000000000000000000000000000
(bootloader) 00000000000000000000000000000000
(bootloader) 000006ea3b1821784e881ce694286221
(bootloader) ecfe000100f0000100000062a7c468a7
(bootloader) 00000000000000000000000000000000
(bootloader) 00000000000000000000000000000000
(bootloader) 0000dddddddddddddddd000631313131
(bootloader) 31313131313131313131313131313131
(bootloader) 0000ffffffffffffffffffffffffffff
(bootloader) ffffffffffff
OKAY [ 0.048s]
finished. total time: 0.048s
Click to expand...
Click to collapse
did you try to get unlock data with this command:
fastboot oem get_unlock_data
Yes correct, I have tried the same command and below is the result:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem get_unlock_data
...
(bootloader) Unlock data:
(bootloader) Unlock data unavailable
(bootloader) Failed
OKAY [ 0.053s]
finished. total time: 0.054s
zitronenmelissa said:
did you try to get unlock data with this command:
fastboot oem get_unlock_data
Click to expand...
Click to collapse
Yes correct, I have tried the same command and below is the result:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem get_unlock_data
...
(bootloader) Unlock data:
(bootloader) Unlock data unavailable
(bootloader) Failed
OKAY [ 0.053s]
finished. total time: 0.054s
zitronenmelissa said:
did you try to get unlock data with this command:
fastboot oem get_unlock_data
Click to expand...
Click to collapse
fortnightbattle said:
Yes correct, I have tried the same command and below is the result:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem get_unlock_data
...
(bootloader) Unlock data:
(bootloader) Unlock data unavailable
(bootloader) Failed
OKAY [ 0.053s]
finished. total time: 0.054s
Click to expand...
Click to collapse
your cid is 0x0000, so it should be unlockable source: https://forums.lenovo.com/t5/MOTO-G...ader-Unlock-Help-Please-post-here/m-p/3024663
did you activate oem unlocking in developer settings (turn wifi on, activate dev settings, activate oem unlocking) ?
zitronenmelissa said:
your cid is 0x0000, so it should be unlockable source: https://forums.lenovo.com/t5/MOTO-G...ader-Unlock-Help-Please-post-here/m-p/3024663
did you activate oem unlocking in developer settings (turn wifi on, activate dev settings, activate oem unlocking) ?
Click to expand...
Click to collapse
Since the Phone is in a bad state , I can only access bootloader where I have typed - "fastboot oem get_unlock_data", to unlock the bootloader but it is not working for me. The Software works proper but by the time system boots up (generally tries 4 times to come up with a vibrate effect) and then sends a message on the screen the verification has failed. ID it gives as blank. Then again phone has to be rebooted to go to the bootloader mode. I read somewhere since (bootloader) cid: 0x0000 so it is an unlockable phone (ATT Device).

Device Delivered with Bootloader Unlocked?

After breaking 2 Galaxy Grand devices, I got my hands on a Latin American Moto G 2015.
The first thing that I tried (as usual) was installing TWRP and Rooting it. My surprise came when I tried to unlock the bootloader: it was already unlocked.
I got the device from my dad. He doesn't know anything other than using the Play Store to install apps.
As I assume, the device came from the company that he works. So that makes more strange that the device came unlocked since day zero.
justalemon said:
After breaking 2 Galaxy Grand devices, I got my hands on a Latin American Moto G 2015.
The first thing that I tried (as usual) was installing TWRP and Rooting it. My surprise came when I tried to unlock the bootloader: it was already unlocked.
I got the device from my dad. He doesn't know anything other than using the Play Store to install apps.
As I assume, the device came from the company that he works. So that makes more strange that the device came unlocked since day zero.
Click to expand...
Click to collapse
Although this is possible, it is more likely you would be struck by lightning while being bitten by a shark... What is the Bootloader Status #?
acejavelin said:
What is the Bootloader Status #?
Click to expand...
Click to collapse
Let's say that is unlocked because fastboot oem device-info and *#*#7378423#*#* failed to check the bootloader status (before and after).
When I tried to install TWRP I knew that was unlocked by default.
justalemon said:
Let's say that is unlocked because fastboot oem device-info and *#*#7378423#*#* failed to check the bootloader status (before and after).
When I tried to install TWRP I knew that was unlocked by default.
Click to expand...
Click to collapse
But in fastboot, what is the Bootloader Status?
acejavelin said:
But in fastboot, what is the Bootloader Status?
Click to expand...
Click to collapse
I can't check the Bootloader Status other than "trial and error". Fastboot shows:
Code:
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
...
(bootloader) 'device-info' is not a supported oem command
(bootloader) See 'fastboot oem help'
FAILED (remote failure)
finished. total time: 0.007s
justalemon said:
I can't check the Bootloader Status other than "trial and error". Fastboot shows:
Code:
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
...
(bootloader) 'device-info' is not a supported oem command
(bootloader) See 'fastboot oem help'
FAILED (remote failure)
finished. total time: 0.007s
Click to expand...
Click to collapse
You are overthinking it... I just meant from the fastboot screen, it shows it in the bottom section, just power off and press POWER+VOL DN to bring up the screen.
Since we are here, lets see the output of 'fastboot getvar all" but mask out your imei number.
acejavelin said:
since we are here, lets see the output of 'fastboot getvar all" but mask out your imei number.
Click to expand...
Click to collapse
Code:
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8916-80.CC
(bootloader) product: osprey
(bootloader) board: osprey
(bootloader) secure: no
(bootloader) hwrev: 0x82B0
(bootloader) radio: 0x5
(bootloader) emmc: 16GB Samsung REV=07 PRV=01 TYPE=57
(bootloader) ram: 1024MB Samsung S8 SDRAM DIE=4Gb
(bootloader) cpu: MSM8916
(bootloader) serialno: ZY2223HLV8
(bootloader) cid: 0x000C
(bootloader) channelid: 0x13
(bootloader) uid: B93DA60E00000000000000000000
(bootloader) unlocked: Not supported
(bootloader) securestate: Engineering
(bootloader) iswarrantyvoid: Not supported
(bootloader) mot_sst: 1
(bootloader) max-download-size: 268435456
(bootloader) reason: Volume down key pressed
(bootloader) imei: XXXXXXXXXXXXXXX
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Dec 7 19:16:28 UTC 2017"
(bootloader) ro.build.fingerprint[0]: motorola/osprey_retla/osprey_umts:
(bootloader) ro.build.fingerprint[1]: 6.0/MPI24.65-33.1-2/3:user/release
(bootloader) ro.build.fingerprint[2]: -keys
(bootloader) ro.build.version.full[0]: Blur_Version.24.51.2.osprey_retla
(bootloader) ro.build.version.full[1]: .retla.en.01
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LA.BR.1.1.3_RB1.
(bootloader) ro.build.version.qcom[1]: 05.01.00.032.015
(bootloader) version-baseband[0]: M8916_2020629.41.03.21.51R OSPREY_NIIL
(bootloader) version-baseband[1]: A_CUST
(bootloader) kernel.version[0]: Linux version 3.10.107-r20-g15931b738759
(bootloader) kernel.version[1]: -04999-gae8e6d5ec254 ([email protected]) (
(bootloader) kernel.version[2]: gcc version 6.3.1 20170404 (Linaro GCC 6
(bootloader) kernel.version[3]: .3-2017.05) ) #4 SMP PREEMPT Wed Aug 2 0
(bootloader) kernel.version[4]: 0:49:13 EDT 2017
(bootloader) sbl1.git: git=MBM-NG-V80.CC-0-g7abea31
(bootloader) rpm.git: git=MBM-NG-V80.CC-0-g932f716
(bootloader) tz.git: git=MBM-NG-V80.CC-0-ga1c5ae6
(bootloader) hyp.git: git=MBM-NG-V80.CC-0-ga1c5ae6
(bootloader) aboot.git: git=MBM-NG-V80.CC-0-gdfaac1d
(bootloader) partition-type:modem: raw
(bootloader) partition-type:sbl1: raw
(bootloader) partition-type:DDR: raw
(bootloader) partition-type:aboot: raw
(bootloader) partition-type:rpm: raw
(bootloader) partition-type:tz: raw
(bootloader) partition-type:hyp: raw
(bootloader) partition-type:utags: raw
(bootloader) partition-type:misc: raw
(bootloader) partition-type:padA: raw
(bootloader) partition-type:abootBackup: raw
(bootloader) partition-type:rpmBackup: raw
(bootloader) partition-type:tzBackup: raw
(bootloader) partition-type:hypBackup: raw
(bootloader) partition-type:utagsBackup: raw
(bootloader) partition-type:logs: raw
(bootloader) partition-type:frp: raw
(bootloader) partition-type:padB: raw
(bootloader) partition-type:modemst1: raw
(bootloader) partition-type:modemst2: raw
(bootloader) partition-type:hob: raw
(bootloader) partition-type:dhob: raw
(bootloader) partition-type:fsg: raw
(bootloader) partition-type:fsc: raw
(bootloader) partition-type:cid: raw
(bootloader) partition-type:metadata: raw
(bootloader) partition-type:logo: raw
(bootloader) partition-type:clogo: raw
(bootloader) partition-type:persist: raw
(bootloader) partition-type:kpan: raw
(bootloader) partition-type:boot: raw
(bootloader) partition-type:recovery: raw
(bootloader) partition-type:ssd: raw
(bootloader) partition-type:padC: raw
(bootloader) partition-type:sp: raw
(bootloader) partition-type:keystore: raw
(bootloader) partition-type:oem: raw
(bootloader) partition-type:carrier: ext4
(bootloader) partition-type:customize: raw
(bootloader) partition-type:cache: raw
(bootloader) partition-type:system: raw
(bootloader) partition-type:userdata: raw
(bootloader) partition-size:modem: 0x00000000027e0000
(bootloader) partition-size:sbl1: 0x0000000000080000
(bootloader) partition-size:DDR: 0x0000000000020000
(bootloader) partition-size:aboot: 0x0000000000113000
(bootloader) partition-size:rpm: 0x000000000003e800
(bootloader) partition-size:tz: 0x000000000008c000
(bootloader) partition-size:hyp: 0x0000000000020000
(bootloader) partition-size:utags: 0x0000000000080000
(bootloader) partition-size:misc: 0x0000000000080000
(bootloader) partition-size:padA: 0x000000000036f000
(bootloader) partition-size:abootBackup: 0x0000000000113000
(bootloader) partition-size:rpmBackup: 0x000000000003e800
(bootloader) partition-size:tzBackup: 0x000000000008c000
(bootloader) partition-size:hypBackup: 0x0000000000020000
(bootloader) partition-size:utagsBackup: 0x0000000000080000
(bootloader) partition-size:logs: 0x0000000000200000
(bootloader) partition-size:frp: 0x0000000000080000
(bootloader) partition-size:padB: 0x000000000022f000
(bootloader) partition-size:modemst1: 0x0000000000180000
(bootloader) partition-size:modemst2: 0x0000000000180000
(bootloader) partition-size:hob: 0x000000000007a000
(bootloader) partition-size:dhob: 0x0000000000008000
(bootloader) partition-size:fsg: 0x0000000000300000
(bootloader) partition-size:fsc: 0x0000000000000400
(bootloader) partition-size:cid: 0x0000000000020000
(bootloader) partition-size:metadata: 0x0000000000080000
(bootloader) partition-size:logo: 0x0000000000400000
(bootloader) partition-size:clogo: 0x0000000000400000
(bootloader) partition-size:persist: 0x0000000000800000
(bootloader) partition-size:kpan: 0x0000000000800000
(bootloader) partition-size:boot: 0x0000000001000000
(bootloader) partition-size:recovery: 0x0000000001019000
(bootloader) partition-size:ssd: 0x0000000000002000
(bootloader) partition-size:padC: 0x000000000087e000
(bootloader) partition-size:sp: 0x0000000000800000
(bootloader) partition-size:keystore: 0x0000000000800000
(bootloader) partition-size:oem: 0x0000000001000000
(bootloader) partition-size:carrier: 0x0000000001000000
(bootloader) partition-size:customize: 0x0000000002000000
(bootloader) partition-size:cache: 0x0000000010000000
(bootloader) partition-size:system: 0x0000000091000000
(bootloader) partition-size:userdata: 0x00000002b3de0000
(bootloader) qe: qe 1/1
(bootloader) frp-state: no protection (77)
(bootloader) ro.carrier: niicl
all: listed above
finished. total time: 0.408s
justalemon said:
Code:
(bootloader) unlocked: [B]Not supported[/B]
(bootloader) securestate: [B]Engineering[/B]
(bootloader) iswarrantyvoid: [B]Not supported[/B]
(bootloader) mot_sst:[B] 1[/B]
Click to expand...
Click to collapse
Hmm... Kind of what I suspected, this device is NOT unlocked... it has an Engineering Bootloader, and the only way to get that is to send it in for repair and have it sent back in error because they didn't finish it.
This topic (Engineering Bootloader) has been revisited many times, there are several threads here discussing it... Basically you are partially unlocked in a way intended for Moto to use a proprietary process to flash it back to stock and maintain the warranty, but they didn't complete the process and return the bootloader to a locked state.
Flashing ROMs and other things will be problematic, because although it appears "unlocked" it is actually in an engineering state and although that sounds good, we have seen a handful of bricked devices because it.
Moto has addressed this in this thread on their official forums (which also contains links to several threads on XDA as well), and customer service should be contacted so the device can be returned to repair to be properly flashed.
Looks like a factory repair problem but the device was never sent to Motorola/Lenovo for repairs.
justalemon said:
Looks like a factory repair problem but the device was never sent to Motorola/Lenovo for repairs.
Click to expand...
Click to collapse
Crazy then... I suppose it's possible it was shipped that way, although it is the first one we have heard of sold that way.
Just use caution when flashing anything, especially custom ROMs, the chance of bricking is high.
Yeah, but i wanted a Moto for the stock rom so i'm good with it.
TWRP, Magisk, SuperSu and No-Frills we're installed without problems.
So many thanks for the help.
justalemon said:
Yeah, but i wanted a Moto for the stock rom so i'm good with it.
TWRP, Magisk, SuperSu and No-Frills we're installed without problems..
Click to expand...
Click to collapse
on stock???
I'm totally astonished as well @acejavelin. I've been with Motorola/Lenovo for over 7 years now and I've never seen a device mistakenly shipped out in this manner.
KrisM22 said:
on stock???
Click to expand...
Click to collapse
I wanted a "pure and clean Android" (no manufacturer or carrier customizations) from the day that I received the device, that means no risky or beta roms.
justalemon said:
I wanted a "pure and clean Android" (no manufacturer or carrier customizations) from the day that I received the device, that means no risky or beta roms.
Click to expand...
Click to collapse
I'm just surprised you were able to install majisk and SuperSU on stock!
MotoJunkie01 said:
I'm totally astonished as well @acejavelin. I've been with Motorola/Lenovo for over 7 years now and I've never seen a device mistakenly shipped out in this manner.
Click to expand...
Click to collapse
A strange device used by a strange guy is not that bad.
Back to the topic, if you guys need more info from the device just ask for it.
justalemon said:
A strange device used by a strange guy is not that bad.
Back to the topic, if you guys need more info from the device just ask for it.
Click to expand...
Click to collapse
@justalemon, would you be willing to provide me with image dumps from your device? Namely, /rpm, /aboot, /sbl1, /tz & /utags. Thanks in advance.
I've got the same device and
(bootloader) unlocked: not supported
(Bootloader) securestate: engineering

[HELP] Unlocking the booloader of Amazon Echo Show 2nd Gen

Hello,
I want to know if someone can help me unlocking the bootloader of this device for installing custom rom/apps
It has an Intel Cherry Trail Processor
I can boot to fastboot using the Vol- and Power together and tried the following commands
fastboot oem unlock - returns OKAY but doesn't unlock the bootloader
Code:
fastboot oem lock
- returns that the device is already in the required state
Code:
fastboot flash twrp.img
- returns that it cannot be possible since the device is locked
Code:
fastboot boot twrp.img
- goes to the amazon logo and then right to fastboot again
Code:
fastboot getvar all
(bootloader) serialno: ------------------------ [hidden for purposes]
(bootloader) board: Intel Corp. Cherry Trail CR 0
(bootloader) device-state: locked
(bootloader) boot-state: GREEN
(bootloader) firmware: Intel Corporation CH2T.BSHP.X64.0005.R09.18091217
(bootloader) product-name: CHERRYVIEW D1 PLATFORM
(bootloader) secureboot: yes
(bootloader) off-mode-charge: 1
(bootloader) unlocked: no
(bootloader) secure: yes
(bootloader) partition-type:vendor: ext4
(bootloader) partition-size:vendor: 0x0000000016C00000
(bootloader) partition-type:userdata: ext4
(bootloader) partition-size:userdata: 0x00000000FA800000
(bootloader) partition-type:data: ext4
(bootloader) partition-size:data: 0x00000000FA800000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:system: 0x000000008CC00000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:cache: 0x0000000020000000
(bootloader) partition-type:factory: none
(bootloader) partition-size:factory: 0x0000000002000000
(bootloader) partition-type:recovery: none
(bootloader) partition-size:recovery: 0x0000000002000000
(bootloader) partition-type:boot: none
(bootloader) partition-size:boot: 0x0000000002000000
(bootloader) partition-type:metadata: none
(bootloader) partition-size:metadata: 0x0000000001000000
(bootloader) partition-type:config: ext4
(bootloader) partition-size:config: 0x0000000000800000
(bootloader) partition-type:misc: none
(bootloader) partition-size:misc: 0x0000000000100000
(bootloader) partition-type:persistent: ext4
(bootloader) partition-size:persistent: 0x0000000000100000
(bootloader) partition-type:bootloader2: none
(bootloader) partition-size:bootloader2: 0x0000000004000000
(bootloader) partition-type:bootloader: vfat
(bootloader) partition-size:bootloader: 0x0000000004000000
(bootloader) max-download-size: 0x0000000010000000
(bootloader) battery-voltage:
(bootloader) version-bootloader: kernelflinger-02.19
(bootloader) device-type: PROD
(bootloader) product: bishop
all:
Finished. Total time: 1.098s
I can also boot into DNX FASTBOOT MODE using all 3 buttons, but I can't do anything in that mode, but the device is recognized using fastboot devices
Does anyone know how to use dnx fastboot mode? Or what is it?
Thank you
Wrong command
Hey! You should be using fastboot OEM unlock, not fastboot OEM lock. Also the unit doesn't have a way to enable adb from what I can tell.
Note: I have NO experience hacking amazon echo
Could you use the same method we use to hack the fire HD8 or HD10 with the brick.sh, then flash the bootrom, then enter a hacked fastboot? From what it looks like, recovery mode on the show looks like the same one used on the HD10.
Echo Show need to unlock
Hello
I tried with the following commands.
I tried with "fastboot oem unlock", but command is not working.
I want to unlock my amazon echo show devices. Or is there any way to open echo show without login with amazon account.
Please help me to solve the issue.
arcanandrei said:
Hello,
I want to know if someone can help me unlocking the bootloader of this device for installing custom rom/apps
It has an Intel Cherry Trail Processor
I can boot to fastboot using the Vol- and Power together and tried the following commands
fastboot oem unlock - returns OKAY but doesn't unlock the bootloader
Code:
fastboot oem lock
- returns that the device is already in the required state
Code:
fastboot flash twrp.img
- returns that it cannot be possible since the device is locked
Code:
fastboot boot twrp.img
- goes to the amazon logo and then right to fastboot again
Code:
fastboot getvar all
(bootloader) serialno: ------------------------ [hidden for purposes]
(bootloader) board: Intel Corp. Cherry Trail CR 0
(bootloader) device-state: locked
(bootloader) boot-state: GREEN
(bootloader) firmware: Intel Corporation CH2T.BSHP.X64.0005.R09.18091217
(bootloader) product-name: CHERRYVIEW D1 PLATFORM
(bootloader) secureboot: yes
(bootloader) off-mode-charge: 1
(bootloader) unlocked: no
(bootloader) secure: yes
(bootloader) partition-type:vendor: ext4
(bootloader) partition-size:vendor: 0x0000000016C00000
(bootloader) partition-type:userdata: ext4
(bootloader) partition-size:userdata: 0x00000000FA800000
(bootloader) partition-type:data: ext4
(bootloader) partition-size:data: 0x00000000FA800000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:system: 0x000000008CC00000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:cache: 0x0000000020000000
(bootloader) partition-type:factory: none
(bootloader) partition-size:factory: 0x0000000002000000
(bootloader) partition-type:recovery: none
(bootloader) partition-size:recovery: 0x0000000002000000
(bootloader) partition-type:boot: none
(bootloader) partition-size:boot: 0x0000000002000000
(bootloader) partition-type:metadata: none
(bootloader) partition-size:metadata: 0x0000000001000000
(bootloader) partition-type:config: ext4
(bootloader) partition-size:config: 0x0000000000800000
(bootloader) partition-type:misc: none
(bootloader) partition-size:misc: 0x0000000000100000
(bootloader) partition-type:persistent: ext4
(bootloader) partition-size:persistent: 0x0000000000100000
(bootloader) partition-type:bootloader2: none
(bootloader) partition-size:bootloader2: 0x0000000004000000
(bootloader) partition-type:bootloader: vfat
(bootloader) partition-size:bootloader: 0x0000000004000000
(bootloader) max-download-size: 0x0000000010000000
(bootloader) battery-voltage:
(bootloader) version-bootloader: kernelflinger-02.19
(bootloader) device-type: PROD
(bootloader) product: bishop
all:
Finished. Total time: 1.098s
I can also boot into DNX FASTBOOT MODE using all 3 buttons, but I can't do anything in that mode, but the device is recognized using fastboot devices
Does anyone know how to use dnx fastboot mode? Or what is it?
Thank you
Click to expand...
Click to collapse
All Amazon echo show devices required unlock code which is generated from the serial number to unlock the devices.
Unfortunately this unlock code can be only retrieved inside amazon corp network through their internal tool for developing purpose.
Hello! I bought a second hand show 5 and the former owner has the account locked out. I can not do anything. When I go into configuration it tells me that it does not recognize the account in amazon.
I have thought that if I can change the serial number of the device, I could finish the configuration correctly.
Code:
fastboot getvar all
(bootloader) antirback_tee_version: 0x0103
(bootloader) antirback_lk_version: 0x0001
(bootloader) antirback_pl_version: 0x0001
(bootloader) rpmb_state: 1
(bootloader) lk_build_desc: cd178e6-20190703_190118
(bootloader) pl_build_desc: d14f08f-20190512_232119
(bootloader) secure: yes
(bootloader) prod: 1
(bootloader) otu_code: +QdtQ0mzlUklt9mtCmRNAYIKNnfW6akA
(bootloader) unlock_status: false
(bootloader) unlock_code: 0x???????????????????? [hidden for purposes]
(bootloader) serialno: ???????????????? [hidden for purposes]
(bootloader) max-download-size: 0x6d00000
(bootloader) off-mode-charge: 1
(bootloader) warranty: no
(bootloader) kernel: lk
(bootloader) product: CHECKERS
(bootloader) version-preloader: 0.1.00
(bootloader) version: 0.5
all: Done!!
Finished. Total time: 0.018s
I have tried this:
Code:
sudo fastboot oem unlock 0xMy_onlock_code
FAILED (remote: 'the command you input is restricted on locked hw')
fastboot: error: Command failed
I cannot access adb.
Any ideas to root or start adb from fastboot?
Any ideas to unlink the old user's account?
I already did a factory reset. Sorry for my english.
Hello , have any sucess?
halfblood* said:
Hello , have any sucess?
Click to expand...
Click to collapse
I got the bootloader unlock code just now using power and both volume buttons to boot fstboot then plugged my phone into micro USB on back running bugajager app
I have had some success using Bugjaeger on my android phone while attached to a couple of uncooperative devices, namely my Tesla style head unit, as well a "Class VR" headset I picked up on eBay . The headset was locked down fairly well, but it was no match for Bugjaeger. I ended up able to load my own launcher, and now it acts like any other rooted android. There may be other tools that can help, I am just sharing my experience with one app. Hope this helps. R*
memorixo said:
Hello! I bought a second hand show 5 and the former owner has the account locked out. I can not do anything. When I go into configuration it tells me that it does not recognize the account in amazon.
I have thought that if I can change the serial number of the device, I could finish the configuration correctly.
Code:
fastboot getvar all
(bootloader) antirback_tee_version: 0x0103
(bootloader) antirback_lk_version: 0x0001
(bootloader) antirback_pl_version: 0x0001
(bootloader) rpmb_state: 1
(bootloader) lk_build_desc: cd178e6-20190703_190118
(bootloader) pl_build_desc: d14f08f-20190512_232119
(bootloader) secure: yes
(bootloader) prod: 1
(bootloader) otu_code: +QdtQ0mzlUklt9mtCmRNAYIKNnfW6akA
(bootloader) unlock_status: false
(bootloader) unlock_code: 0x???????????????????? [hidden for purposes]
(bootloader) serialno: ???????????????? [hidden for purposes]
(bootloader) max-download-size: 0x6d00000
(bootloader) off-mode-charge: 1
(bootloader) warranty: no
(bootloader) kernel: lk
(bootloader) product: CHECKERS
(bootloader) version-preloader: 0.1.00
(bootloader) version: 0.5
all: Done!!
Finished. Total time: 0.018s
I have tried this:
Code:
sudo fastboot oem unlock 0xMy_onlock_code
FAILED (remote: 'the command you input is restricted on locked hw')
fastboot: error: Command failed
I cannot access adb.
Any ideas to root or start adb from fastboot?
Any ideas to unlink the old user's account?
I already did a factory reset. Sorry for my english.
Click to expand...
Click to collapse
Hi! Have you managed to do anything with it? I have a locked echo show 8, which I'm trying hard on finding a way to unlock it... Would very much appreciate any help on this matter, thanks!

Help needed moto G5 plus - stuck in fastboot menu? cant flash?

I have spent the last 12 hours trying to fix this. I am tech savvy but have never flashed a cellphone before, hence I dunno if I am doing something wrong. And apologies if my terms aren't correct. please correct me when I am wrong.
Phone is a moto G5 plus XT1681 (according to imei), one day it powered to fastboot (see image 1) and what ever I try to press, I get an error. (see image 2)
I followed and tried many guides. but especially this one
[GUIDE] Moto G5 Plus: Flashing Stock Firmware & Rooting [2021]
Flashing signed stock firmware: You need: Latest signed stock firmware: Europe (RETEU): https://mirrors-obs-2.lolinet.com/firmware/motorola/2017/potter/official/RETEU/ India (RETIN)...
forum.xda-developers.com
when I try to run the first line of the script I get the following error.
C:\Users\ADj\Desktop\moto g\Tiny ADB and Fastboot>fastboot oem fb_mode_set
FAILED (remote: '')
fastboot: error: Command failed
If I keep advancing in the code I get the same error than this guy
Bricked MOTO G5(XT1676) stucked at fastboot menu
hELLO.. I have had a moto g5 with oreo and magisk installed I tried to unistall magisk from magisk app after reboot it told me that startup failed then flashed an nougat rom and it worked perfectly but without imei numbers so i deleted cache from...
forum.xda-developers.com
the phone is detectable with command "fastboot devices"
Despite running this, the phone still stays "oem_locked" like in the images
C:\Users\ADj\Desktop\moto g\Tiny ADB and Fastboot>fastboot oem unlock
(bootloader) feature disabled
OKAY [ 0.017s]
Finished. Total time: 0.018s
I tried also installing TWRP and I get this error (because maybe that bypasses a locked bootloader?)
"(bootloader) Preflash validation failed
FAILED (remote failure)¨
And here is the log for what I learned that you always ask for
C:\Users\ADj\Desktop\moto g\Tiny ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8953-C0.92(*)
(bootloader) product: potter
(bootloader) board: potter
(bootloader) secure: yes
(bootloader) hwrev: P3B
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG QX13MB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=1F
(bootloader) cpu: MSM8953
(bootloader) serialno: ca31f0ad
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: 423FF92E00000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 534773760
(bootloader) reason: Last time flashing failed
(bootloader) imei: 000000000000000
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: git=MBM-NG-VC0.92-0-g3ea8df0
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
Finished. Total time: 0.175s
QUESTIONS
Am I just confusing rom because of firmware or country?
is all of this because my bootloader seems locked?
do I just need to get to recovery mode first?
I just want the phone to work, don't care for the data inside.
Other people that seem to be stuck with the same problem
https://forum.xda-developers.com/t/...-question-noob-friendly.3963645/post-85232253
THANKS IN ADVANCE AND SORRY FOR THE LONG POST I WANTED TO GIVE ALL MY INFORMATION AND RESEARCH
Same problem here.

Categories

Resources