Database Users

New rom flashed. need help!

i'm newbie so i'm sorry if i make mistakes..
since i had problem with TyphooN CyanogenMod 7 Nightly v3.2.1
i have flashed this Rom (thanks ti tyween) over a different Rom i used before, i followed ROM or Kernel-UpdateROM instruction, everything works fine except i keep getting "Sorry! The process com.android.phone has stopped unexpectedly..please try again." jump continuously on myscreen
Hope somebody help me out thank U!!!

First off did you do a full wipe of all your partitions cache, boot, data, system, and then to advanced and wipe delvike cache before flashing your new ROM?
Also did you do at least two soft resets after flashing your new ROM?

As posted above, if you have not done so I would suggest a full wipe and re-flash. Sounds like something went wrong during the flash, or your partitions are wrong.
I've had this problem before, so again, full wipe and re-flash according to the instructions by the dev and let us know.

T-Macgnolia said:
First off did you do a full wipe of all your partitions cache, boot, data, system, and then to advanced and wipe delvike cache before flashing your new ROM?
Also did you do at least two soft resets after flashing your new ROM?
Click to expand...
Click to collapse
5. Wipe caches, fix permissions, reboot
a. Select option „wipe cache partition“, confirm
b. Select option „advanced“
c. Select option „Wipe Dalvik Cache“, confirm
d. Select option „Fix Permissions“
e. Press <Back> button to return to CWM main menu
f. Select option „reboot system now“
i've done all steps above , is that enough?.. and i just tried the soft reset too it still jump out.
i noticed that my mobile net work didn't work too and counldn't find "settings" on my menu

Legolas90 said:
5. Wipe caches, fix permissions, reboot
a. Select option „wipe cache partition“, confirm
b. Select option „advanced“
c. Select option „Wipe Dalvik Cache“, confirm
d. Select option „Fix Permissions“
e. Press <Back> button to return to CWM main menu
f. Select option „reboot system now“
i've done all steps above , is that enough?.. and i just tried the soft reset too it still jump out.
i noticed that my mobile net work didn't work too and counldn't find "settings" on my menu
Click to expand...
Click to collapse
Try the "Wipe data/factory reset" option and the other options you listed before and then reflash the ROM. Then report back.

oh thank u very much..it's working

[Q]

CAN ANYBODY HELP ME PLEASE? PHONE STUCK AT RED M LOGO.
While being on Maniac's 25/04 build I decided to run V6 Supercharger. After I tried to run it got a message that it didn't have superuser rights although I pressed alow. The system got slow and I decided to reboot. It got hanging at the red M logo for a few min. Tried with Vol+- and power and after the blue and green lights it keep hanging on the red M logo. I decided to reflash the nightly but when I pres power button at the blue light I don't get to the CWM menu. Tried it 3 times without any effect. Funny thing is that I can still charge the phone. Does anyone have a idea what to do and spare me starting everything from the beginning? Any help is deeply appreciated!!!

can you boot into the recovery menu and wipe the caches and things??
hold volume down then the power button and this should get you into the stock recovery but you can still do a factory reset in there by doing a data wipe then clear cache and dalvik cache.
Not sure this will work and it will wipe all your data and apps but it may recover the system and make it boot.
Edit: maybe just try to wipe the cache first before doing factory reset, This will keep all your apps and data.

kelbygreen said:
can you boot into the recovery menu and wipe the caches and things??
hold volume down then the power button and this should get you into the stock recovery but you can still do a factory reset in there by doing a data wipe then clear cache and dalvik cache.
Not sure this will work and it will wipe all your data and apps but it may recover the system and make it boot.
Edit: maybe just try to wipe the cache first before doing factory reset, This will keep all your apps and data.
Click to expand...
Click to collapse
Thanks for your answer. Unfortunately wiping cache on stock recovery didn't help, and if I do a factory reset I'll wipe out everything including 2nd init and cwm. It looks like I have to start with RSD and Froyo again.

yeah it sucks loosing all the apps and setting everything back up again but sometimes it has to be done.
I done it alot before I fully knew what I was doing. Flashing roms and RSD with the wrong kernels and all was frustrating to say the least

[/QUOTE] I decided to reflash the nightly but when I pres power button at the blue light I don't get to the CWM menu. Tried it 3 times without any effect. Funny thing is that I can still charge the phone. Does anyone have a idea what to do and spare me starting everything from the beginning? Any help is deeply appreciated!!![/QUOTE]
You get to CWM with VOL DOWN! And you should make a wipe cache /dalwik from CWM, not stock recovery as you did... You can try make a wipe cache, wipe dalwik cache from CWM, but maybe CWM got corrupted because of wipe cache you did from stock recovery...
If so, you you should make a factory reset from stock recovery, and start again with superoneclick, 2ndinit, CWM... Etc
If you flash custom roms you can forget stock recovery, everything is done from CWM! I've not seen my stock recovery for half year, flashing custom roms from CWM...
Good luck!
Sent from my MB526 using XDA

4.3 flashing and bootlooping problem

Hi there
I seem to have a problem flashing 4.3 roms, actually any rom that isn't stock in general.
Right now I am running syzmel's 20E with 1.3ghz overclock version 3.09.
Back to the problem: this is the steps I take to upgrade to any rom: 1. Download (slimbean, vanir asop) 2. flash v20D (unmodded) 3. Root it using Framaroot 4. Install CWM using L7CWM.zip (extracted, then clicked on flash bootloader, flash recovery, and then booted into recovery) 5. Boot into CWM 6. Click on factory reset and reset 7. Go into mounts and storage and format /system 8. Go to advanced and wipe dalvik cache. 9. Flash either 4.3 version slimbean or Vanir ASOP (tell me which is better) 9. Flash gapps (Slimbean: Slim AIO minimal Gapps, Vanir: 4.3 minimal Gapps which is found in the Vanir ASOP page) 10. Factory reset again 11. Wipe dalvik 12. Reboot
Now as soon as I reboot, either it stays rebooting, or boots once and when you reboot it stays at the boot loading page (slimbean logo, or android logo) (In other words, once you go black, you never go back. Not being racist, just saying once it blacks out it doesn't work no more). So i retry. And then I give up and stick on v20E.
So please suggestions?

Also ignore my signature

AsianFoodRules said:
Also ignore my signature
Click to expand...
Click to collapse
Are you sure it wipes made ​​correctly?

Danm, yes I'm sure.

Why you dont format cache and data & data/media ?
Did you try boot without gapps... Sometimes bad gapps cause a lot of problems
Sent from my LG-E610 using Tapatalk

When you factory reset it clears cache automatically. I'll try without Gapps.

wipe data,wipe cache wipe dalvic cache

AsianFoodRules said:
When you factory reset it clears cache automatically. I'll try without Gapps.
Click to expand...
Click to collapse
How do you factory reset? Factory Reset is NOT only wipe data

raul338 said:
How do you factory reset? Factory Reset is NOT only wipe data
Click to expand...
Click to collapse
Factory reset in CWM clears cache automatically.
....Anyway, I finally fixed it. Turns out I had to wipe EVERYTHING. Including /data and /data media. Thanks anyway guys.

LG Optimus L5 E610 - CWM Bootlooping
Basically I inserted a pre-rooted firware into my lg phone using 20d+root + cwm.kdz, everything was fine including the flashing, I some how got the the CWM recovery and done everything such as wiping cache, etc, but the problem was before and after the wiping, etc, is that everytime i press power button it turn off and on and back on to the CWM recovery screen not home screen with apps, etc.
I am really fustrated, please Help!:crying:

[Q] [URGENT] Phone (possibly) dead!!

I flashed this rom "cm-10.2-20131014-UNOFFICIAL-e610" on my friend's LG Optmus L5 E610, then wiped data and cache and dalvik cahe, then i flashed "gapps-jb-20130813-signed", also wiped data and cache and dalvik cache then v20 baseband, also wiped everything. I clicked on reboot, and screen gone from white slowly to grey, and some green line were on bottom of phone, I've removed battery and then rebooted again, but it's same. And then a lot of colors on screen. Images are in attachment.
Please help me...

nikola3244 said:
I flashed this rom "cm-10.2-20131014-UNOFFICIAL-e610" on my friend's LG Optmus L5 E610, then wiped data and cache and dalvik cahe, then i flashed "gapps-jb-20130813-signed", also wiped data and cache and dalvik cache then v20 baseband, also wiped everything. I clicked on reboot, and screen gone from white slowly to grey, and some green line were on bottom of phone, I've removed battery and then rebooted again, but it's same. And then a lot of colors on screen. Images are in attachment.
Please help me...
Click to expand...
Click to collapse
man, you need to wipe data and cache and dalvik BEFORE to flash the CM, after flash the gapps and baseband WITHOUT any more wipes
you just installed gapps on nothing, after baseband on nothing
go back in cwm and wipe everything, install cm, gapps, baseband

Sabyn said:
man, you need to wipe data and cache and dalvik BEFORE to flash the CM, after flash the gapps and baseband WITHOUT any more wipes
you just installed gapps on nothing, after baseband on nothing
go back in cwm and wipe everything, install cm, gapps, baseband
Click to expand...
Click to collapse
After waiting of few hours phone booted into android OK.
Every next time it shows same white screen going to gray, then colors and it boot normally after 2-3 minutes, and it's working perfectly .

[Q] com.sec.android.app.FlashBarService has stopped

I get this message in my note3 sm-n900 :
"unfortunately,com.sec.android.app.FlashBarService has stopped"
and i can not use multi window or pen windpw
so what is the problem?
i tried wiping cach and dalvic but nothing change

Bump. having this issue myself. I've tried to wipe cache and dalvic cache and nothing changes

Solution
http://forum.xda-developers.com/showpost.php?p=38086411&postcount=298