First, let me say this because i've used xda for a while and i know im going to get these responses:
I know this wont reinstate my warranty...
Why? Because I want to. I understand you think it's useless but it's not your phone...
I have tried "fastboot oem lock" and it doesnt work...
I've searched Motorola's site, got on a chat with them which was useless, and searched xda...
So I booted into AP fastboot and connected to my computer. Opened CMD and typed "fastboot oem lock begin"
That seemed to start the process so then ran RSD lite (as admin) and flashed a signed xml of 4.1.2
Yes, I edited the XML first and removed the 2 lines with "getvar" in them
RSD finished and the phone rebooted (which was great because before it was hung up on the unlocked bootloader warning)
Unfortunately after turning the phone off and then back on, the unlocked bootloader warning screen still came up.
And after booting back into AP fastboot it still said UNLOCKED.
did i miss a step?
I need to relock the phone. if anyone has useful information it would be extremely helpful. in the event it just cant be done thats fine. but i feel like it can, because after fastboot oem lock begin the command prompted told me that now i can flashed the signed images.
well crap. i may have just answered my own question. do i have to flash manually through CMD (ie fastboot flash system system.img) AND THEN run fastboot oem lock at the bottom? i'll try it tomorrow.
before i started this the phone was stuck on the bootloader warning screen so if anyone is stuck at that point this will allow you to boot up your phone. and if my results are typical, it did not relock the bootloader (obviously). hope I helped someone. hope someone can help me. thanks.
most likely not feasible
unlocking razr m involves phisically blowing a q-fuse, so you can't go back to locked
even if you could, it would be traced forever that you've unlocked the BL
You can relock the boot loader on the Dev edition, but once unlocked you can never go back to original status 0 of the boot loader and the boot logo will always display the warning even if you relock the boot loader. You have to flash that partition with another logo image to avoid that.
You also need to wipe the user data partition in fastboot first for the fastboot oem lock begin command to complete successfully.
Once that is done, when it reboots you will see that in fastboot it will display status 2 locked instead of status 3 unlocked.
This is a physical change that happens to the hardware when you unlock the boot loader an efuse on the board is blown and that memory location is permanently programmed. Its not even a question of them knowing, even though they do of course, the device itself is altered.
From my goodies
http://forum.xda-developers.com/attachment.php?attachmentid=2201206&d=1376991889
Flash from cwm or twrp.
Trade a locked one for your unlocked one? Lol I'm stuck locked on the newest ota
Sent from my XT907 using Tapatalk
So a while ago I rooted my phone but messed it up because I uninstalled a few too many system apps. I just dealt with it for a few months since I could still make calls (but not much else). I finally bit the bullet to look into flashing the stock rom again, but to do so it looked like I had to install a custom recovery, but to do that, unlock the bootloader. So I first unlocked the bootloader using motopocalypse (batch file didn't work but apk did), and got the expected BOOTLOADER UNLOCKED message at bootup, with fastboot saying unlocked, code 3. I then tried flashing CWM recovery via Rom Manager, and it seemed successful, but I was unable to boot to it either from the UI of ROM manager or from holding the buttons during bootup, it would just hang for a few more minutes than normal at the BOOTLOADER UNLOCKED screen, then boot up like normal. So I kept reading, found RSDlite, and was able to flash the stock rom, which I downloaded from the internet and the phone boots up fine, but now fastboot says locked, status code 2, and motopocalypse does not unlock it again (either the batch file or the apk), but I still get the BOOTLOADER UNLOCKED message at bootup. So I'm not sure if my bootloader is unlocked or not and if I can proceed with installing CWM recovery again, so i can make a full backup in case I mess something up again.
So how do I reunlock the bootloader, or verify if it's locked or not?
First, CWM and TWRP aren't official for this phone, so you can't use their apps to flash. You'll need to use fastboot, Flashify, or Rashr. Second, you're still unlocked, we've seen this error come from bad flashes. What is the complete text on your FB screen. You should be able to clear this by re-flashing with RSD. What firmware did you attempt to flash?
Sent from my HTC6525LVW using Tapatalk
RikRong said:
First, CWM and TWRP aren't official for this phone, so you can't use their apps to flash. You'll need to use fastboot, Flashify, or Rashr. Second, you're still unlocked, we've seen this error come from bad flashes. What is the complete text on your FB screen. You should be able to clear this by re-flashing with RSD. What firmware did you attempt to flash?
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
FB screen:
Code:
AP Fastboot Flash Mode (S)
10.9B(*) (sha-61146a2, 2014-05-02 00:54:39)
eMMC Info: Size 8GB
Device is LOCKED. Status code: 2
Battery OK
Transfer Mode:
USB connected
Fastboot reason: Reboot to bootloader
usb connected
I've tried reflashing with RSD previously but no change. I could try it once more if you want.
Not entirely sure what you're asking for with the firmware version, but the image I used was for android 4.4.2, version 183.46.10.XT907Verizon.en.US.
modemman11 said:
Device is LOCKED. Status code: 2
Click to expand...
Click to collapse
I think your boot loader is still LOCKED. Mine is showing UNLOCKED. Status code: 3. You cannot flash a custom recovery on a phone with a locked BL. You need to motocalypse again!
To trace the issue from the ground up, if you're just trying to reinstall stock ROM, you should be relying on RSD instead of trying to mess with custom recoveries and BL unlocking. Just flash .10 (not .15) via RSD, root via Towelroot and you can start fresh.
Unlocking your BL is still highly recommended, though, 'cuz it's now or never.
Sent from Google Nexus 4 @ CM11
[WARNING: XDA Premium 4.0.13 lacks Signature function - do not update]
Code 3 as well.
Sent from my XT907 using XDA Free mobile app
rahimali said:
I think your boot loader is still LOCKED. Mine is showing UNLOCKED. Status code: 3. You cannot flash a custom recovery on a phone with a locked BL. You need to motocalypse again!
Click to expand...
Click to collapse
Yes, that's why I'm asking. So I've got one vote for unlocked, one for locked. As I said though, motopocalypse isn't working a 2nd time.
AndyYan said:
To trace the issue from the ground up, if you're just trying to reinstall stock ROM, you should be relying on RSD instead of trying to mess with custom recoveries and BL unlocking. Just flash .10 (not .15) via RSD, root via Towelroot and you can start fresh.
Unlocking your BL is still highly recommended, though, 'cuz it's now or never.
Click to expand...
Click to collapse
I would like to flash custom ROMs later down the road, but for now I just want to get the stock stuff going.
On a side note, the version of the image I downloaded was 183.x.x, but my mother, who has the same phone, purchased at the same time, and has never rooted it or anything, has version 182.something, and that is also the version I had before I started messing with the bootloader/recovery stuff. The two versions were released at the same time, but I don't know what determines which version you got if you just did OTA updates, or if it even matters. Speaking of OTA updates, the version I downloaded is prompting me to do an OTA update now to another 183.x.x version. I wonder if I'd be able to grab the 182.x.x ROM from my mom's phone without rooting it via fastboot or something.
The 182/183 does not matter regarding root/boot loader unlock its the .10/.15 that matters do not take the .15 without unlocking your boot loader....
We cannot teach people anything; we can only help them discover it within themselves.
So no other thoughts? What would happen if I flashed a custom rom/recovery with a locked bootloader? I tried flashing the ROM again and fb still says locked, code 2, and motopocalypse still doesn't do anything like it did the first time.
modemman11 said:
What would happen if I flashed a custom rom/recovery with a locked bootloader?
Click to expand...
Click to collapse
It won't let you flash a custom recovery. This is the difference between locked and unlocked.
modemman11 said:
So how do I reunlock the bootloader, or verify if it's locked or not?
Click to expand...
Click to collapse
If your bootloader is relocked for some reasons, try unlocking it again with
Code:
fastboot oem unlock
lem22 said:
It won't let you flash a custom recovery. This is the difference between locked and unlocked.
Click to expand...
Click to collapse
I guess what I'm asking is, will it let me flash it but then the phone won't work or will give an error on boot, or perhaps brick my phone? Or will it just not flash in the first place? Because if it's the latter, then I can just try to flash a custom ROM/recovery and if it works then I know it's unlocked.
If your bootloader is relocked for some reasons, try unlocking it again with
Code:
fastboot oem unlock
Click to expand...
Click to collapse
Code:
D:\adt-bundle-windows-x86-20140702\sdk\platform-tools>fastboot oem unlock
...
(bootloader) fastboot oem unlock [ unlock code ]
OKAY [ 0.031s]
finished. total time: 0.031s
Still locked code 2 though. Looks like it wants an unlock code from Motorola's website, I tried following the steps to get the code but it says I'm not eligible for bootloader unlock. So unless there's another way to get the unlock code...
modemman11 said:
I guess what I'm asking is, will it let me flash it but then the phone won't work or will give an error on boot, or perhaps brick my phone? Or will it just not flash in the first place? Because if it's the latter, then I can just try to flash a custom ROM/recovery and if it works then I know it's unlocked.
Click to expand...
Click to collapse
A "Code 0" locked device would refuse flashing an unofficial or older recovery. I have no idea about Code 2 though.
From what I was able to locate status code 2 indicates that the bootloader has been unlocked and relocked like by doing the whole "fastboot oem unlock unlock code" then the "fastboot oem lock" ... I'll look more into it but from what little I read it looks like it can not be unlocked again with out the Motorola unlock code...
We cannot teach people anything; we can only help them discover it within themselves.
ezknives said:
From what I was able to locate status code 2 indicates that the bootloader has been unlocked and relocked like by doing the whole "fastboot oem unlock unlock code" then the "fastboot oem lock" ... I'll look more into it but from what little I read it looks like it can not be unlocked again with out the Motorola unlock code...
We cannot teach people anything; we can only help them discover it within themselves.
Click to expand...
Click to collapse
Same here, I can see what it means but cannot find any way to get back to code 3 other than using the unlock code from Motorola, which I am unable to obtain because it says I am not eligible. Surprising that someone hasn't cracked the unlock code yet or made a keygen, people are so eager to do it with pirated computer software before the software is even released.
I've read of someone getting locked status code 2 b4 from flashing an older gpt with rsd (if I remember correctly) I think all that was required to fix it and get unlocked again was to flash the latest gpt. Very important..... Are you sure when you were unlocked you didn't ota update to .15? Because flashing .10 gpt while on .15 may be what caused your false relock
Nope, no OTA update to .15. The ZIP I have of the rom does include the gpt.bin file with the same timestamp as all the other files. I suppose I could try reflashing the whole rom once again later...
Hmm strange, I went to find the old thread I read about the gpt relock issue but it's not exactly the same as your situation.
http://forum.xda-developers.com/showthread.php?p=51436123
Until now I didn't think relock was possible due to the way unlocking works. It's a physical change, a qfuse was blown when the motopocalypse apk was run the first time. It can't be unblown lol. Wish I knew what went wrong here.
several questions in no particular order:
Does the "OEM Unlocking" toggle do anything on the XT1572?
If I issue the fastboot OEM LOCK command after having sucessfully unlocked the device before, do I need to go through the full data wipe+send oem data+flash unlock code process again?
Lastly, I was able to flash the MM firmware for my Single SIM AISA model XT1572 despite having the bootloader locked (I think).
Is that normal that I can flash the official moto firmware using just fastboot without having to tweak with anything else?
I presume that since the digital signatures are correct the bootloader has no issue accepting the MM files.
Not quite the end of the world if I have to wipe everything and start over (it's only been a day) but I regret not knowing earlier. Nor did I expect to get this far with a relocked boot loader. Was trying to add SuperSU and found that while I can overwrite flash the stock recovery I cannot flash TWRP.
psyvenrix said:
several questions in no particular order:
Does the "OEM Unlocking" toggle do anything on the XT1572?
If I issue the fastboot OEM LOCK command after having sucessfully unlocked the device before, do I need to go through the full data wipe+send oem data+flash unlock code process again?
Lastly, I was able to flash the MM firmware for my Single SIM AISA model XT1572 despite having the bootloader locked (I think).
Is that normal that I can flash the official moto firmware using just fastboot without having to tweak with anything else?
I presume that since the digital signatures are correct the bootloader has no issue accepting the MM files.
Not quite the end of the world if I have to wipe everything and start over (it's only been a day) but I regret not knowing earlier. Nor did I expect to get this far with a relocked boot loader. Was trying to add SuperSU and found that while I can overwrite flash the stock recovery I cannot flash TWRP.
Click to expand...
Click to collapse
As far as I am concerned relocking the bootloader wont wipe your data and yes about the question regarding the stock firmware
PS: Dont relock your bootloader once you unlock it the warranty doesnt come back even if you lock it again
I'm trying to get one of my E4's ready to sell (I have two of them) and need to relock the bootloader so that the N/A message goes away. I reinstalled the stock firmware provided here using fastboot (and followed the appropriate oem locking steps) but at the very end I get:
Code:
Still require signed boot.img
I am assuming nobody has found a workaround for this as Lenovo hasn't provided official stock firmware and I haven't seen any posts about a solution? Would appreciate any insight.
Not possible currently, just let the buyer know that the bootloader is unlocked and it's root ready lol.
Is it still currently not possible to relock the bootloader?
AZImmortal said:
Is it still currently not possible to relock the bootloader?
Click to expand...
Click to collapse
fastboot oem lock_bootloader
Then go to Motorola.com grab a stock image
Fastboot flash boot boot.img and everything else too.
Fastboot flash
bootloader
oem
Boot
Logo
system
Etc....
I did this and had to use my code that they emailed me to unlock the boot loader again.
I had hardbricked my devices while installing an OTA update and the device was Hardbricked .
I blank flashed the device and it booted and bootloader.
Now the problem starts here.
I flashed the OEM_Lock.bat as I wanted to relock the bootloader. I'm not sure what went wrong but the flash didn't complete and stuck in middle.
The problem remains here is it shows
Fastboot Reason: Failed to initialize partition table
I am unable to flash anything now. Recovery.img fails, bootloader.img fails, twrp flashing fails.
Nothing flashes as Bootloader is locked.
I went to Motorola Service Centre. They also couldn't do anything and simply said that their software doesnt read the phone.
Is there anyone whoe can really help me out with anything left to do?
Any method to force flash recovery, even twrp?
Phone is detected as Fastboot athene_16mp S in computer. It doesnt detect as "Qualcomm HS-USB QDLoader 9008".
What firmware are you attempting to flash?
Your device looks like it's still on the blank flash provided bootloader, which means you have to flash at least the GPT and bootloader. The lack of a serial number and the generic identifier implies you have not been able to flash an actual GPT and bootloader. Also, OEM_locked is normal until you get an actual bootloader flashed over the blank flash bootloader, which usually means trying to flash a GPT and bootloader at least as new as the latest version you had on your device (regardless of downgrades).
I'd suggest downloading the latest Nougat stock ROM we have from here. Do not use any of the scripts at this time.
https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
Unzip the file, delete any old stock ROMs from your ADB folder and copy over the new stock ROM. Try to flash just the GPT and bootloader then reboot to fastboot. See if you reboot into a fastboot screen with details.
If you do, I would proceed to flash the rest of the new ROM without locking your bootloader. If your device boots then, then you can reflash with the locking commands.
Edit - also, this post probably is better suited to the Q and A section...
echo92 said:
What firmware are you attempting to flash?
https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
Unzip the file, delete any old stock ROMs from your ADB folder and copy over the new stock ROM. Try to flash just the GPT and bootloader then reboot to fastboot. See if you reboot into a fastboot screen with details.
If you do, I would proceed to flash the rest of the new ROM without locking your bootloader. If your device boots then, then you can reflash with the locking commands.
Click to expand...
Click to collapse
The files in mentioned firmware did the trick. It flashed GPT and Bootloader and showed the needed info.:highfive: After that I flashed the same firmware via fastboot commands and device has booted to the stock 7.0 - Bootloader Unlocked. How crazy was I to ignore the proper files to flash? I probably tried 100 times to flash files (wrong once for sure). Thanks alot though for providing the link and instructions. :silly:
Now one last thing, should I flash OEM_Lock file to lock the bootloader so that I can get the lastest Oreo update? I might even think fo selling the device after locking the bootloader. Need your genuine opinion on this as well.
mysteryno46 said:
The files in mentioned firmware did the trick. It flashed GPT and Bootloader and showed the needed info.:highfive: After that I flashed the same firmware via fastboot commands and device has booted to the stock 7.0 - Bootloader Unlocked. How crazy was I to ignore the proper files to flash? I probably tried 100 times to flash files (wrong once for sure). Thanks alot though for providing the link and instructions. :silly:
Now one last thing, should I flash OEM_Lock file to lock the bootloader so that I can get the lastest Oreo update? I might even think fo selling the device after locking the bootloader. Need your genuine opinion on this as well.
Click to expand...
Click to collapse
Eh, you live and learn. Besides, you've now got your device running now!
Honestly, it's up to you. Having a locked or unlocked bootloader will not affect your ability to receive OTA updates - you should still receive updates so long as your firmware matches your software channel (and since your device was XT1643, the NPJS25.93-14-18 April 2018 security update should be the correct firmware). At this moment in time, you'll have to use the NPJS25.93-14-18 firmware to re-lock your bootloader - we don't have the stock Oreo firmware at this time. Thus, if you update to stock Oreo, you will not be able to re-lock your bootloader until you can get a leak of the Oreo firmware.
If you're selling, I'd choose to re-lock the bootloader. Else, a potential buyer who is not used to flashing custom ROMs might wonder if there's any tampering with the device (the bootloader unlocked warning, to someone not used to flashing custom firmware, might scare off potential buyers).
Back to Locked Bootloader, complete stock.
echo92 said:
Eh, you live and learn. Besides, you've now got your device running now!
If you're selling, I'd choose to re-lock the bootloader. Else, a potential buyer who is not used to flashing custom ROMs might wonder if there's any tampering with the device (the bootloader unlocked warning, to someone not used to flashing custom firmware, might scare off potential buyers).
Click to expand...
Click to collapse
I am back to Locked Bootloader as feel the same as you said that anyone buying might get scared by looking the warning sign. Thanks for helping out. :highfive:
Oreo Update via OTA has already started rolling out as per the news I've been reading. I just wanted to see the oreo 8.1 before I sell the phone.
Anyways I got a new device now, Realme C1, 3|32GB as my smartphone usage has declined a lot recently and might remain similar. This device will suffice my requirements.
Thanks for the help and support. :victory: