Hey guys, I'm suffering massively after flashing faux's kernel. It started off when I rebooted the device and it took me to device setup. I thought it was a malfunction, so I went back into recovery and flashed my backup that I had made minutes before. But the same thing happened. It took me back to the setup screen. So I decided to wipe and flash the ROM again (pa 2.5). And everything seemed fine until I checked the kernel status. It still had the same kernel as before (faux123). I thought I had made a mistake somewhere so I decided to download and flash a new kernel. I downloaded it but after I went into recovery I couldn't find the downloaded file... So I rebooted and downloaded the kernel onto my PC and transfer it to my tab via USB. I rebooted into recovery and flashed the kernel over fastboot... But to no avail. When I rebooted the device it took me to setup again. This is when the screen went crazy. It started flashing and and going nuts. I thought it was the kernel I just flashed, So I rebooted and the tab was fine but it took me to setup again. I went through the rigmarole of setting up a 4th time and checked my kernel status and guess what? Still faux123. Now I really don't know what it wrong. I've tried using the nexus root tool kit v1.5.2 but still to no avail. I've tried manually pushing the files over adb but still Nothing... I've sent faux a message asking for help but haven't received a reply yet.
Any help would be great guys.
Last night I got a Galaxy S5 as an anniversary gift and successfully rooted and installed TWRP and Alliance Rom 4.4.2 and everything is going smooth for the most part except for fingerprint scanning.
When going to define a new fingerprint or access fingerprint options it gives an error: "An error has occurred with the fingerprint sensor...".
The process I took to mod it was use Odin to downgrade the kernel back to a towelroot friendly one, use towelroot to gain root, install busybox, flash previous kernel back using Odin, installed Safestrap (nandroid backed up), installed Alliance Rom via Safestrap recovery, installed SuperSU (disabled KNOX) and here I am. Does disabling KNOX cause the issue?
Any advice would be greatly appreciated! Thanks XDA
Yes I have searched forums and google before posting. Yes I wiped prior to installing the rom.
Unrelated problem: the phone also does not shut down. When going to shut down the samsung shut down animation plays then the screen goes black and just hangs there. The LED shows a blue light and the bottom soft keys are lit up and it will stay that way until I pull the battery. Any advice?
UPDATE: Please read the next post.
A while back, I rooted my v20 with magisk using this method and everything worked fine for a few months, except for a few issues that reflashing the system would fix. Last night, SystemUI kept crashing (the status bar and the buttons would disappear). After a while, the phone crashed, and then it completely refused to boot. It would very rarely get to the lock screen, but it usually crashes soon after I unlock it. I tried everything I know of that could fix it, such as restoring the boot partition and reflashing magisk, reflashing the system partition, and wiping the cache and dalvik/ART cache. I eventually gave up with this and just reset it through the wipe menu in TWRP. I was able to get the phone to work for about a day without any issues, and then the same thing started happening again. It would take a really long time to boot and the system would crash. I tried using that ~1 minute it gives me before crashing to enable core mode in magisk to prevent any modules from loading, but that didn't do anything. I am really confused as to why this would happen considering that I reset the boot and system partitions multiple times in this process, and eventually did a full reset. It should be like a brand new phone. I really don't know what could possibly be the issue. Any help would be greatly appreciated.
Update: It turns out that Magisk Core Only Mode did not properly apply because of yet another crash. I cleared my cache once more, which gave me enough time to properly apply it, and now my phone is staying on and not crashing. But this still is concerning to me. I was able to run Magisk modules perfectly fine in the past, including after the most recent Magisk zip update, so why is it that I can no longer run modules, and that this issue persists after a factory reset? It can't be an update, because, as I stated, I was able to run modules just fine for at least a week before these issues occurred. Please correct me if I'm wrong, but this makes absolutely no sense and I want to be able to run modules again. I even deleted the modules through TWRP but the only thing that seems to fix this issue is completely disabling all other features via Magisk Core Only Mode.
Update 2: A Magisk update came out recently and I tried updating to that to see if it would fix the issue. This only brought back the original crashes. I tried using the Magisk uninstaller zip (because I found that simply reflashing Magisk isn't enough, there are other files which magisk uses to store data.) After doing this and reflashing Magisk, it worked for a little bit, but, me being me and wanting busybox installed, I managed to bring back the crashes. After that, uninstalling and flashing magisk would work, but only until a reboot. I am at a complete loss. I am currently backing up my internal storage (manually since TWRP doesn't) and I will try a full /data format.
Ok, it has been a few days since I wrote the previous section but I decided not to post it because if the /data format worked, I didn't want to have bumped it for no reason. At first, it worked, and I decided to leave it like that without rebooting it for a few days or messing with Magisk, and my phone worked perfectly. I had to restart my phone because Google photos was acting up, and it started crashing again. I am genuinely confused. I completely formatted my phone and reflashed Magisk several times, and it is still crashing. I just reset my phone again because I attempted to just restore a stock boot backup from before I installed Magisk, which made my phone completely unbootable. I pulled the battery and found that it tried re-encrypting the phone (AFAIK, TWRP doesn't support encrypted data on the v20, which really sucks) so I had to wipe it and flash Magisk so it wouldn't re-encrypt it. I will try to do this again, but I don't want to not be able to restart my phone (which is so far the only thing that's working for me). This time, not even uninstalling and re-flashing Magisk worked this time, as it has all of my previous attempts. I had to completely reset it. Again. I really need this issue fixed. I probably already said this, but I would greatly appriciate any possible help I could get. I really want my phone back.
Ok I forgot to include some basic information about my phone.
Model number: LG-H910
Android version: 7.0
Android security patch level: April 1, 2017
Kernel version: 3.18.55
Build number: NRD90M
Software version: H91010m
According to Kernel Auditor:
Kernel: Linux version 3.18.55-Werewolf-2.0-Basilisk ([email protected]) (gcc version 6.3.1 20170430 (GCC) ) #1 SMP PREEMPT Sat Jun 24 00:56:07 CDT 2017
Bump/Update: This is a small one, but, despite not restarting my phone, Magisk is showing an error "Magisk is not installed". Root access also disappeared. I don't know how much longer I can keep it on without having to restart it due to random issues like these that usually fix themselves with a reboot. I would appreciate any help.
Seems like your phone is all sorts of wacked out. I noticed from the specs your using the werewolf kernel. I had all sorts of performance issues as well as random reboots using that kernel. Since you're losing root and the system is overall unstable I recommend wiping clean and starting over. Wipe system, data, cache, and dalvik in twrp and flash the full stock 10r zip by runningnak3d. It will put you on the latest security patch with the newest firmware available. I recommend installing askerm2000 1.4 kernel as it is very stable and works well on the h910. Flash magisk last (latest 15.3 works great for me) and reboot. Hopefully will solve your problems. The 10r zip for the h910 plus askermk2000 kernel and magisk has served me well for a while now.
toastyp said:
Seems like your phone is all sorts of wacked out. I noticed from the specs your using the werewolf kernel. I had all sorts of performance issues as well as random reboots using that kernel. Since you're losing root and the system is overall unstable I recommend wiping clean and starting over. Wipe system, data, cache, and dalvik in twrp and flash the full stock 10r zip by runningnak3d. It will put you on the latest security patch with the newest firmware available. I recommend installing askerm2000 1.4 kernel as it is very stable and works well on the h910. Flash magisk last (latest 15.3 works great for me) and reboot. Hopefully will solve your problems. The 10r zip for the h910 plus askermk2000 kernel and magisk has served me well for a while now.
Click to expand...
Click to collapse
Thank you. Before I do this, I have a few questions.
1. How do I disable force encrypt with Magisk? I remember when I flashed Magisk 14.0, that managed to disable force encrypt, but any other version of Magisk wouldn't do that when installing fresh (updates kept this setting). AFAIK TWRP is unusable on the v20 for things such as backups, file browser, etc because it isn't compatible with the encryption algorithm used by the v20. How would I turn off force encrypt with the latest Magisk zip
2. Should I do a full format data (where you have to actually type "yes" to confirm it) or just wipe those partitions using advanced wipe?
3. Will the askerm2000 kernel hide modified boot, unlocked bootloader, etc from safetynet just as Werewolf kernel did, and will it get rid of the static boot issue?
4. Will this increment ARB? If anything goes wrong, I want to be able to roll back.
5. If it was working perfectly fine before, what suddenly made everything come crashing down, even after multiple wipes? This is not as important as the other ones, I am just curious.
Sorry if these questions seem over excessive and/or obvious. Doing stuff like this tends to make me a bit nervous and I want to think of everything I can that might affect the outcome.
NullBite said:
Thank you. Before I do this, I have a few questions.
1. How do I disable force encrypt with Magisk? I remember when I flashed Magisk 14.0, that managed to disable force encrypt, but any other version of Magisk wouldn't do that when installing fresh (updates kept this setting). AFAIK TWRP is unusable on the v20 for things such as backups, file browser, etc because it isn't compatible with the encryption algorithm used by the v20. How would I turn off force encrypt with the latest Magisk zip
2. Should I do a full format data (where you have to actually type "yes" to confirm it) or just wipe those partitions using advanced wipe?
3. Will the askerm2000 kernel hide modified boot, unlocked bootloader, etc from safetynet just as Werewolf kernel did, and will it get rid of the static boot issue?
4. Will this increment ARB? If anything goes wrong, I want to be able to roll back.
5. If it was working perfectly fine before, what suddenly made everything come crashing down, even after multiple wipes? This is not as important as the other ones, I am just curious.
Sorry if these questions seem over excessive and/or obvious. Doing stuff like this tends to make me a bit nervous and I want to think of everything I can that might affect the outcome.
Click to expand...
Click to collapse
Twrp can properly decrypt the v20. Twrp backup and restore works just fine for me. Never had an issue with this. You format data and then type yes. Wipes the data partition but this is only needed once. Decrypts the device and twrp can then do it's thing. Encryption problems stem from booting into system with a stock boot image that has force encryption enabled without flashing magisk or supersu. They modify the kernel to prevent the device from rencrypting. Latest magisk 15.3 has zero issues keeping the phone decrypted. The modified boot warning has nothing to do with the kernel. This is caused by the debug bootloader used to achieve root on the US carrier v20's. Nothing can be done to change that. ARB has not been incremented on the h910 so that isn't an issue currently. Potentially in the future, but not right now. The problems you're having could stem from a multitude of issues. Could be modifications you made, bad flashes, etc. If you're having issues with encryption and stuff sounds like magisk wasn't functioning properly at the end. I've been rooted since last January and haven't experienced anything like that before so I'm not sure
toastyp said:
Twrp can properly decrypt the v20. Twrp backup and restore works just fine for me. Never had an issue with this. You format data and then type yes. Wipes the data partition but this is only needed once. Decrypts the device and twrp can then do it's thing. Encryption problems stem from booting into system with a stock boot image that has force encryption enabled without flashing magisk or supersu. They modify the kernel to prevent the device from rencrypting. Latest magisk 15.3 has zero issues keeping the phone decrypted. The modified boot warning has nothing to do with the kernel. This is caused by the debug bootloader used to achieve root on the US carrier v20's. Nothing can be done to change that. ARB has not been incremented on the h910 so that isn't an issue currently. Potentially in the future, but not right now. The problems you're having could stem from a multitude of issues. Could be modifications you made, bad flashes, etc. If you're having issues with encryption and stuff sounds like magisk wasn't functioning properly at the end. I've been rooted since last January and haven't experienced anything like that before so I'm not sure
Click to expand...
Click to collapse
Ok, I cannot possibly thank you enough for this. After this started happening, I seriously thought my phone was at the end of its life. If this were to happen, I wouldn't be able to get a new phone anytime soon. Not only did it fix the crashes (I only restarted it once, I'm not going to try to intentionally make it crash), It ALSO managed to fix my FM radio and (I think) the Google Assistant Voice Match unlock thing, both of which I never even thought I would be able to get back. Let's just hope that it stays this way. I have one last question. Would you say it's safe to download and install Magisk modules now?
NullBite said:
Ok, I cannot possibly thank you enough for this. After this started happening, I seriously thought my phone was at the end of its life. If this were to happen, I wouldn't be able to get a new phone anytime soon. Not only did it fix the crashes (I only restarted it once, I'm not going to try to intentionally make it crash), It ALSO managed to fix my FM radio and (I think) the Google Assistant Voice Match unlock thing, both of which I never even thought I would be able to get back. Let's just hope that it stays this way. I have one last question. Would you say it's safe to download and install Magisk modules now?
Click to expand...
Click to collapse
Yes. I use a few modules myself without an issue. If you're unsure of the stability of a module, you can always take a nandroid backup in twrp prior to installation. If things are stable, and then you flash something and the phone freaks out, it's most definitely the mod you have flashed causing problems. Some modules make changes to the system partition that have the potential to problems. But I haven't had a module cause my device to bootloop or reencrypt. So I think you're good to go. Glad you're phone is up and running as it should. Very strange that it was in such a bad way, but crap happens. I have had zero issues with this setup (10r + 1.4 askermk kernel + magisk 15.3).
I have the stock firmware on the H990 version, I end up on the Crash LK screen error. I can access TWRP, how can I restore access to my device without losing data? Thanks.
Hello together,
I'm using official RR ROM 7.0.2 on my G900F, until recently with latest tuned kernel. I suddenly got some random freezes with reboots without knowing the reason. Then after some crashes it resulted in a bootloop, meaning that the RR bootscreen is loading forever (already tested for hours).
Flashing RR ROM again fixed the issue completely, but when I flash tuned kernel again I immediately end in bootloop. Flashing boot.img of RR ROM once again fixes the problem. Then I tried Intelli-Kernel and it boots, however the first unlock screen is very laggy, system ui takes long time to load after unlock (after that it works normal) and I get here and then sudden reboots. After some crashes/reboots I end up with bootloop with Intelli-Kernel.
Once again: flashing boot.img of RR fixes all the problems.
It's unlikely that the kernels itself are at fault, as they are working for many others and also worked for my device until recently.
So why am I unable to use custom kernels suddenly and how can I fix it?
I'm grateful for any hints you can give to pinpoint the reason. I already asked in the kernel Telegram group but sadly they weren't able to help me.
- I'm clearing dalvik/cache every time,
- tried TWRP repair feature for /data partition
- and as far as I can say I removed all remands of boeffla config app, but even if there are some they should load after system boot so obviously kernel settings aren't applied when I stuck on boot screen.
I don't overclock but for the same reason it shouldn't matter even if I do.
If possible, I would like to avoid a full wipe.
Thanks in advance.
Have you tried backing up your entire phone, wiping and installing RR, letting it boot etc before rebooting to recovery and installing a custom kernel again? If that fails, then either the version of RR you are using is incompatible, or you have some sort of hardware failure somewhere.