After owning the Touch HD for a full month I just noticed that down the middle of the screen there is something which I can best describe as an oil stain. It looks as if there is a liquid in between the glass/plastic screen and the resistive layer that lays on top of it.
The screen works normally and this "stain" can only be observed if I look at how the light reflects of it.
Any idea what happened?
Hi,
I have a small idear. The TFT-Monitor ist touching your Touchscreen. Probeply you pressed something on your HD, that the two Monitor touch each other, that is why it looks like a Water or Oil spot.
This can happen for example, if you are carrying your HD in your trouser pocket.
If you want to try to remove this spot, you have to turn with your both hand the hd, like the right hand turn with the clock and the left hand turn to the other way.
Sorry, my english is not very good for such a discribing. What I mean is like "to contort" or "to skew (up)". But you have to be very carefully. Before you start, remove the Battery
(I'll be incorporating a clearer explanation along the lines of what Dude10 was trying to say)
The effect you're seeing is IDENTICAL to what causes the colours to appear on an oil film actually!
The way the Touch HD screen works is to have the hard glass (polycarbonate plastic actually as far as I'm aware, but that's not important here!) with a squashy resistive sensor layer on the top.
This resistive layer detects touch as an increase in resistance at the spot that's compressed - be that by a finger or a stylus. Because the upper layer can be compressed, it can also be malformed by stronger than normal pressure, such as an object in a pocket. The effect can be more pronounced if your body heat warms up the screen surface making the screen "set" in position rather than spring back as it should do...
The "oil" effect is cause by the reflections of light from the outermost plastic layer and the outermost surface of the hard screen. When the gap is small enough, these reflections can interfere with each other, cancelling and re-inforcing different wavelengths depending on the thickness - hence the tapering of the screen from thinnest to thickest results in a "rainbow"
Now, why explain all this you may ask? Partly because I like science and it fascinated me in school to learn what caused that effect so wanted to share this! (And this also explains why it only presents itself when you look at the light reflections)
Anyway, more importantly, the solution to your problem is to restore the thickness of that part of the touch layer to it's original uncompressed state.
I'd firstly start trying to hold your finger flat against the top of the phone screen (on flat surface, portraint orientation, finger "left to right") then pressing resonably hard (the hard screen should protect the device - if not you're pressing too hard!) slide your finger down the screen from top to bottom trying to keep an even pressure. This should hopefully even out the surface.
Failing this, as Dude10 suggests, take the battery out and use your thumbs (holding with fingers in the battery well) to press and "smear" around the problem area.
Unfortunately, other than this I don't think there's a particular way to remove the effect totally if it doesn't work...
Obviously it's speculation given that you didn't mention how it happened in the first place, but it does sound like it got knocked or pressed by something either in bag or pocket - maybe even a fold in the pouch
Hope you manage to smooth it out!
WhO_KnOwS said:
After owning the Touch HD for a full month I just noticed that down the middle of the screen there is something which I can best describe as an oil stain.
Click to expand...
Click to collapse
Just a long shot, but:
Sometimes a similar effect can be caused when some moisture has got between the layers of a display.
Have you used the phone anywhere damp or very humid ?
Keeping it somewhere warm and dry might be worth a try?
- Steve
Thanks for all the tips. The issue happened when I had the Touch HD in the pouch and in my pocket - so the idea that it was a fold in the pouch holds water.
The funny thing however is that before I saw all of your replies I was already out the door (with the Touch HD back in the pouch and pocket). 5 minutes later when I pulled it out the issue was gone. I am guessing that I reapplied the exact amount of pressure needed or something like that.
Thanks again for the tips and especially to chaosdefinesorder for the nice explanation.
Thx for helping explanation
5 minutes later when I pulled it out the issue was gone.
Click to expand...
Click to collapse
no, i don't think it was gone. check again under a fluorescent light....
i have this on my diamond. my HD is flawless (till now...)
i phoned to a technician and explain the phenomena and he invited me to replace the screen. when i got there, to my complete amazement and embarrassment the stain was gone. only later i discovered that the stain is visible under fluorescent light only.
chaosdefinesorder said:
Unfortunately, other than this I don't think there's a particular way to remove the effect totally if it doesn't work...
Hope you manage to smooth it out!
Click to expand...
Click to collapse
thanks m8, already tried this (on my diamond) and tried now again with both yr methods. no results. the stain is still there...i think only a replacement can solve it.
here u have the paralel thread in diamond forum:
http://forum.xda-developers.com/showthread.php?t=439410&highlight=oily+stain
you can not do it yourself. the best way will be to go to your seller or straight to HTC, because I think you HD still have warranty.
I repaired ones an Diamond and I can tell you, it wasn´t an easy way.
So, I had a nightmare - was chatting on my phone, stumbled, dropped the thing dead on to concrete.
The screen now has cracks running across it from top to bottom and a few snowflake/spider web looking cracks in it.
Whilst I can still read the screen and amazingly the touch sensitivity hasn't been affected, I don't want a smashed up phone.
So to clarify - my phone works fine, it scrolls and picks up typing etc etc - it is totally useable but the glass screen that protects the LCD screen has been damaged pretty badly.
Can I just buy a new screen for it? Or will I need an entirely new phone?
Cheers
A search goes a long way...
http://forum.xda-developers.com/showthread.php?t=613954
So I removed the included screen protector since it had a deep scratch on it. I read on the forums that you don't need the protector and that it actually works better without it.
Well my experience has been the complete opposite. Ever since I removed the protector I'm ready to smash this bloody phone. It's next to impossible to use due to the humidity in my area or something. The SMALLEST amount of moisture on my finger tips or even in the air will cause the screen to go haywire and register touches all by itself. Apps will open by themselves...i can barely type anything as it keeps typing multiple characters on it's own or other silly stuff. If I wipe down the display it will work fine for the first little bit until it gets that tiny bit of moisture from my fingers on the screen again and it starts going haywire again. It's a hassle just to try and unlock the phone from the lock screen at times.
So is my phone defective or is just the suffering I must incur by living in a humid area. I can't use the phone like this so I guess I'll have to look at buying a new screen protector. But if this is not normal and is a fault in my hardware then i would like to return it and get a different phone. I didn't really have issues with the screen protector on.
Ive kept my screen protector on my phone, works fine until i have moisture or (rain drops) on the screen, then my phone doesnt respond and also misfunctions the position of where i touch on the screen not sure if this is normaly as its the rain drops on the screen..
Tested witht he iphone 4 in the rain and works brilliant, why doesnt the X10 do the same !! :/
duffy1807 said:
Ive kept my screen protector on my phone, works fine until i have moisture or (rain drops) on the screen, then my phone doesnt respond and also misfunctions the position of where i touch on the screen not sure if this is normaly as its the rain drops on the screen..
Tested witht he iphone 4 in the rain and works brilliant, why doesnt the X10 do the same !! :/
Click to expand...
Click to collapse
As you may know, those screens are capacitive displays, that means they're activated by sending (very) small amounts of electricity and are kinda "looking for a conductive material" in order to register an input.
The conductive material can be your finger, or something like... a raindrop or your screen, so that's why it thinks you're pressing that part of the screen...
Now it's even more obvious without the screen protector since it's directly on the screen.
As for why the iphone doesn't have issues with that, it does, but the screen being multitouch it's not as bad...
thanks for the info.good to know.
I didn't like the thick screen protector as my thumb/finger seemed to drag and not slide smoothly. I took it off and replaced it with a slightly thinner protector. I'm much happier with the feel now.
Angie
Sent from my X10i using XDA App
@smok3yjk - probably best if you do as Angelahp - get another screen protector on there.
I have a weird problem with my touchscreen.
if i lay down my phone on a mattress the touchscreen doesn't notice touches on the navigationbar and i can't access the notification drawer!
the rest of the screen is working well only these two areas doesn't notice any touches if i lay it down on a mattress. on a table sometimes it works and sometimes not and if i hold the phone in my hands, everything is perfect!
i really don't know what this could be !
Stock rom, no root, bootloader locked !
Problem solved: for those who are using a protective film or going to buy one for their n4, i used the Vikuiti DQC160 film and this material is causing issues with the touchscreen. i really don´t know why it´s only when the phone lays anywhere on a table or something but it´s definetly the protective film what caused this strange issue.
Someone spilled drink over my phone at a party and I cleaned it. But in the morning I realized that a small row of touchscreen is unresponsive. It's like a finger lenght area horizontally. What do you think if I try to put my phone in a rice will it take moisture? Or do I have to order a lcd directly?
plus: if I touch hardly, this unresponsive area works.