Hi,
i have a Galaxy S4 (GT-I9505) that won't charge or get an USB connection with any PC.
The interesting thing is, in download mode it's charging. Also it gets recognized by odin.
Now i thought it would be a good idea to flash back 100% stock. But now i musst see that this doen't fix my problem.
Has anybody any idea what could cause this issue and how to fix it?
Thanks.
j0ch3
Does nobody has a idea what could be the cause for this issue?
I have to turn on download mode everytime I have to charge.
Related
i am using a galaxy s4 i9500...
recently i have installed kitkat 4.4.2 manually...
now its having a problem...it does not charge..
i checked the charger and the battery with another phone...i does not have any defects.
when i connect to the computer in usb mode it does not show..but when i connect it in odin mode it shows that its connected...
sometimes the phone says connected to dock..
is there is anyone who have arised this matter o someone who know how to solve....can u plss help...m tired now..
Hey!
New to XDA but a complete fan of the help and guides you guys provide.
So, I acquired an i9060 smartphone and successfully installed CM 11 without the help of my laptop since the usb cable through Odin never worked for me (driver issues on Win10?).
Unfortunately, my phone entered an Android boot loop. And now with a lot of attempt I can't even enter CWM or even charge my smart phone, as it always reboots while trying to charge the battery (it's always drained) or gets stuck during logo before accessing CWM.
I tried to install Samsung drivers, Kies, ABD, Odin to restore the firmware but... nothing seems to recognise this Samsung device. Does anyone had the same problems I'm having now? Any suggestions?
You might try another USB cable, USB port, or even another computer. Without Odin, you're not going to be able to fix this since recovery is no longer available.
es0tericcha0s said:
You might try another USB cable, USB port, or even another computer. Without Odin, you're not going to be able to fix this since recovery is no longer available.
Click to expand...
Click to collapse
Tried on 3 laptops but the problem persists. Never thought of changing my usb cable though. I'll give it a shot
Btw, is there anyway to use an external SD card to force a factory reset?
n1ur0 said:
Hey!
New to XDA but a complete fan of the help and guides you guys provide.
So, I acquired an i9060 smartphone and successfully installed CM 11 without the help of my laptop since the usb cable through Odin never worked for me (driver issues on Win10?).
Unfortunately, my phone entered an Android boot loop. And now with a lot of attempt I can't even enter CWM or even charge my smart phone, as it always reboots while trying to charge the battery (it's always drained) or gets stuck during logo before accessing CWM.
I tried to install Samsung drivers, Kies, ABD, Odin to restore the firmware but... nothing seems to recognise this Samsung device. Does anyone had the same problems I'm having now? Any suggestions?
Click to expand...
Click to collapse
Have you considered the possibility that your power button is sticking? Not the part that you touch but the hardware switch behind it?
Do you have USB debugging enabled?
Are you using the stock cable or at least a USB cable with the same number of pins/pinouts?
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
loche37 said:
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
Click to expand...
Click to collapse
Try disabling and enabling USB debugging while the phone is connected.
GDReaper said:
Try disabling and enabling USB debugging while the phone is connected.
Click to expand...
Click to collapse
Thanks for your reply, i've tried this many times, even when typing "adb devices", adb can't find my phone and it doesn't appaer in windows Device manager
loche37 said:
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
Click to expand...
Click to collapse
I have the exact same probleme... Odin work but no mtp....Have you found a solution ?
Hey a friend of mine has a S8 and its stuck on a Bootloop.
It also won't launch into Recovery Mode but the Download mode works but my PC cant find the Phone.
I installed the Samsung USB drivers,it's the Original cable, switch'd ports.
Anything else i can do to fix the phone?
hi,
so i was in the middle of flashing a new rom onto my samsung tab s6 lite wifi edition when it randomly disconnected.
the recovery isnt working i cant get into fastboot either nor can i get into download mode any more im stuck on the
"an error has occured while updating the deivce software..." screen and smart switch isnt recognizing my tablet either.
i dont know what else to do anymore and i really wanna fix it cause i just bought it a few days ago. im also using the original
in the box cable if anyone is wondering. so far i have tried everything on which i was able to find a thread about. and i cant
find/see another way to fix it please someone help!
I had been through few error messages including the one you mentioned and so far have no problem re-flashing through ODIN.
The only thing I could think of is your computer USB software or hardware problem. It also might be the USB cable or the USB port compatibility issue where on certain devices, there's problem with USB v2.0, v3.0, v3.1. I'm using a mid-end PC for all my mobile 'operations' as there's a lot of issues with my high end computer.