Hi there,
I have a note 3 which I would like to use with voLTE on the three network. Three's 4G 800Mhz signal is the only one that can penetrate the house. Therefore voLTE would make it useable inside.
Has anyone achieved this?
Is there any diff firmware with it enabled that I could flash?
Thanks!
Sam
Related
Hi, have a galaxy note 2 and I am on 3 uk. I was thinking of getting a 4g phone so I can take use of dc-hsdpa, and I was wondering how easy it is to enable the 4g cop on the phone? Thanks
The n4 runs on 3g/4g by default, its lte that needs to be enabled through the dialer. But lte only works in canada and some us cities, don't think any uk carrier supports lte band 4.
Ok thanks for the reply. My carrier are using DC-HSDPA and only the 4g phones have the bands to support it? Any ideas
The n4 does support 42mbps dc-hsdpa http://www.gsmarena.com/lg_nexus_4_e960-5048.php
Hello. I have recently acquired a Samsung Galaxy Note 3 N9006 and found that it cannot get better than 2G speeds, no 3G or 4G on T-Mobile.
Would there be a way to fix this? If so, any help would be appreciated.
Moktul said:
Hello. I have recently acquired a Samsung Galaxy Note 3 N9006 and found that it cannot get better than 2G speeds, no 3G or 4G on T-Mobile.
Would there be a way to fix this? If so, any help would be appreciated.
Click to expand...
Click to collapse
N9006 has no 4G and from the 3G bands only one in 4 fits with T-Mobile (2100MHz) - if that is not strong in your region then you are out of luck (you might also want to see if it is possible to only force that band so as to avoid the phone trying to change to the other 3 bands that don't work).
I am using 935FD exynos variant and i am getting very low speed with Reliance Jio sim I know the Reason but unfortunately i don't know the solution. The problem is Jio offers good speed on Band 40 but my S7E catches only BAND 5 & BAND 3 which offers lower speed. How can i choose or lock specific LTE bands? Please Help me.. Thanxx in advance ??
Guys, I am facing same problem. Can someone help please?
Here in Italy I got LTE+ icon with TIM carrier but the speed is almost the same reached in classic LTE: 25mb/s download speed.
The same SIM card used in S7 edge reaches 95 mb/s.
With VODAFONE carrier, instead, I ve never seen the LTE+ icon but just LTE and the speed is about 20-25 mb/s.
Anyone want to share his experience?
Thanks!
Anyone?
LTE+ or 4G+ is at lest a higher form of channel bonding. Try dial code *0011#, *2263# should have band selection,(note this may not always work but did on my note5) it should bring up tower info. Band 2 is [email protected] when LTE+ you will have like band 4 not sure it might be [email protected], this channel bonds to 30mhz with the 20mhz becoming download only vs 10mhz for download and 10mhz upload. The band 4 or whatever your carrier chooses (I have AT&T we use Band 2 and Band 4 as our top bonding, I set Band 2 as favored for default, best performance) becomes the upload only. This makes a + environment like HSPA vs HSPA+.
TechNyne66 said:
LTE+ or 4G+ is at lest a higher form of channel bonding. Try dial code *0011#, *2263# should have band selection,(note this may not always work but did on my note5) it should bring up tower info. Band 2 is [email protected] when LTE+ you will have like band 4 not sure it might be [email protected], this channel bonds to 30mhz with the 20mhz becoming download only vs 10mhz for download and 10mhz upload. The band 4 or whatever your carrier chooses (I have AT&T we use Band 2 and Band 4 as our top bonding, I set Band 2 as favored for default, best performance) becomes the upload only. This makes a + environment like HSPA vs HSPA+.
Click to expand...
Click to collapse
unfortunatelly these codes don't work in italy...
Ive got a couple of questions and wondering if anyone can help.
Gsmarena lists the note fe as cat12, dose anyone know if cat9 would be supported a cat12 device?
Prior to doing any mods on my n935s, i was not getting 4G+ or the highest data speeds using the EE UK network. On my G935F with the same sim card id would get 4G+ and higher data speeds. Im pretty sure that is due to the fact the S7 was able to make use of 3 cell carrier aggregation. The G935F is CAT 9.
I have installed TWRP on my N935S and then installed the Note 7 BTU CSC to see if my N935S can make use of 3CA, however nothing interms of data speeds has changed. I dont think the phone allows the 3CA connection. I can see from the specs that all the nessacery bands are supported by the N935S.
Does anyone have any ideas?
Hi. Since I got s7edge ,i have been having some really bad network signal. I barely can got 4g with 1 bar,even though i have here good coverage for 4g .however,i have 3g and 2g full signal.With other phones i have had (p10,s7flat,htc one m9) i got full bars LTE+ signal. What could be the problem? I assume network band. I tried changing it on *#0011# but i cannot enter band options. I got sac23 v8 port.
"sac23 v8 port"
That's your problem. Get the original software if you want stability and reliability.
PS: You didn't say what hardware version of the phone you have and what cell network you are on. There are too many combinations for us to guess.
@SoNic67 Hm. Sorry,didn't think you would need hardware version.. i had same problems with official stock firmware and rom,thats the main reason i rooted my phone. So ,my hardware version is MP 0.801 and I'm on Serbian network,company name is MTS. We have some solid 4g coverage here..
Based on this, MTS has LTE Band 3 and Band 20.
Note that what is called 4G in Europe is technically LTE. So it means the same thing.
Looking at cellmapper.net, in Serbia, outside Belgrade, I see on MTS a lot of cells only with B20.
I don't know about Serbia, but in Romania I know that band 20 is a shared band (10MHz) by all the providers, in rural areas, so the connection to it is very unstable (I am not sure who has priority in case of congestion). I often saw there only 3G signal when B20 was overwhelmed. The actual speed test in those places was identical on 4G/LTE and 3G (H+) - the back-haul connection was limited.
Also, I am not familiar with your hardware version. Some versions have differences in supported LTE bands.
So... I would investigate that - what bands are actually implemented in your modem. Flashing different firmware won't change that, it's in a different memory.
I would start looking at this, at least to read the NV #06828 value (phone doesn't even need to be rooted):
https://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
i want to know how to change lte bands on exynos s7edge ..rooted or non rooted .earlier it was *#2683662# but its not working now..
saurabh808 said:
i want to know how to change lte bands on exynos s7edge ..rooted or non rooted .earlier it was *#2683662# but its not working now..
Click to expand...
Click to collapse
Try *#2263# to change bands manually.
RukusX7 said:
Try *#2263# to change bands manually.
Click to expand...
Click to collapse
its not working
Take the SIM out first, reboot and then do the *#2263# without SIM inside.
However, note that when changing the SIM, the CSC file is re-flashed the modem with the appropriate bands and different restrictions (including locking service modes).
On my S7Edge, only with an AT&T SIM I can see the *#2263#. With Verizon SIM it doesn't work.
saurabh808 said:
its not working
Click to expand...
Click to collapse
Mines Canadian g930w8, maybe it's in the CSC or modem as ours is different. Maybe not the ROM as I am on _alexndr's devbase.
RukusX7 said:
Mines Canadian g930w8, maybe it's in the CSC or modem as ours is different. Maybe not the ROM as I am on _alexndr's devbase.
Click to expand...
Click to collapse
i guess so ..