Database Users

Nook -completely- unresponsive/truebrick,full battery,unrelated to Rooted Forever scr

Hello all, I'm curious to hear your thoughts and advice.
My nook is completely unresponsive. It is not stuck at rooted forever.
In fact this has nothing with a root attempt/reset/restore/power on.
I had done a a fresh reset/root with touchnooter about four months ago and was happily and smoothly reading for about two months. I then got busy and put the nook down, did not touch or use for about another two months. I tried to use it about a week ago but found that it had run out of battery in sleep after the two months of disuse (not surprising). I put it on charge overnight and everything booted right and functioned well once it turned on, except that the battery indicator in the statusbar showed a "?" and the battery info in system info showed 100% "unknown". After alot of fruitless research I put it down with the intention of reset/restore/root when I had the time.
I just picked it up this morning and was faced with the expected "Press then button below to wake up your NOOK" screen. But when I pressed the "n" button nothing happened. Obviously holding the "n" did nothing as well.
I tried to power it off and on- nothing
holding power for 20- nothing
power for 30- nothing
8 failed boots- nothing
left right- nothing
left right power-nothing
random pushing and holding of power- nothing
all these with mem card in and out- nothing
all these plugged usb- nothing
all these pugged ac- nothing
I let it charge some more- nothing
None of the buttons do anything, the screen stays inevitably at the " press the n button to wake" screen. no activity whatsoever except that when It is plugged in, the green light shows. NO ORANGE LIGHT... it is fully charged by both usb and ac.
It is not detected at all by windows anywhere.
In Linux- lsusb, bklid, and df -h yield nothing. My nook might as well be the invisible stupid ereader.
I did not drop it, sumbmerge it, perform magic around it... It has been sitting on a shelf doing nothing.
To repeat, the only thing my nook does is light up green when plugged.
It is unchangeably stuck on poe's face...
If this isn't true brick, I don't know what is.
I'm exhausted. Any ideas? I appreciate the help.
Best,
Thomas

i don't know. i just know my dog ate mine and i'm now in the market for a new screen, so if you don't get it working sell me the unit and get some money for yourself to purchase a new one =D
or you could google the disassembly instructions and try unplugging the battery, not very hard to do. could be of .. some help perhaps?

I would definitely take you up on your offer, but i'm still under warranty.
However, I would still like to have my original, and figure out what is going on and why it happened.
Ideas?
Thank you.

similar problem were solved
Hi! I might have read about similar problem solved on USB host mode here http://forum.xda-developers.com/showpost.php?p=23475998&postcount=131

That's it, thanks so much.

if it help
if it helps let them know in the tread that you had same problem. they are wondering whether it is due to host mode

[N2E]: After automatic update to 1.1, Nook Touch Screen absolutely DEAD--Nothing Work
THIS WAS A POST FROM ANOTHER SITE AS TO MY PROBLEM:
I was reading on my N2E last night. I put it down for about 30 minutes and when I came back it was displaying the default "Authors" screensaver (I had switched to the Nature photos) and asking to slide to unlock. I thought, "Oh, the new software update must have downloaded and installed. I'll check it out." To my shock, the touch screen was completely unresponsive--no amount of swiping would unlock from the screen saver. I let it set for a while longer thinking perhaps the softare update was not yet finished. No such luck.
As a result of the new update, my NOOK is now completly DEAD! I tried powering off, but couldn't do that because you are asked to confirm power off on the touchscreen, which no longer works. So, I looked online and tried the soft reset/reboot by holding down the "Home" or "n" button and then pressing the power button for several seconds. Great--it started rebooting...and came right back to the "authors" screen saver and asking to swipe to unlock. I tried this rebooting process several times, always with the same result: back to screeensaver mode with completely unresponsive touchscreen.
So, looked at the online technical troubleshooting discussion and helps and decided to try a downloaded manual install of the software update. Plugged my NOOK into my computer and it recognized it. So, I downloaded the manualo software update and dragged and dropped it onto the NOOK as directed and sure enough, it started to reboot itself. I thought, "whew, maybe this will fix it". NOPE--came right back to the locked screensaver, with no mention of attempting to update software, and the touchscreen is still dead. (By the way, all of this was done initially with the NOOK showing about 94% charged, so it was not a battery issue.)
Reconnected the NOOK to my computer and the software update file was gone from its home directory, which implies it did something with it. So, I tried repeatedly to install the software update manually, always with the same result: NOOK comes back to locked default "authors" screensaver wtih a dead touchscreen.
Looked online for B&N technical support again saw that others had this problem (though only found a couple references). Found the instructions to do a factory reset and reluctantly tried that, desparate to make my NOOK work again, but frustrated that if it did I would have to rebuild everyting on it and download my 400+ B&N book library all over again. But, guess what, factory reset just comes up to the "Welcome to your all-new NOOK" screen (sounds like progress), BUT the touchscreen is STILL dead, so I can't hit the "Next" button onscreen to proceed with setting up my factory-reset NOOK. Tried rebooting again (as this seems to be the only solution offered in the online tech support) and now it just keeps coming back to the "Welcome to your all-new NOOK" screen with a dead touchscreen keeping me from doing anything.
So, now I am taking it back to my local B&N store in hopes they will exchange it for a new NOOK.
I really want to see a feature to disable automatic updates in the future. I specifically didn't download and manually install when the update came out, figuring I'd wait for the automatic download to give time to B&N to work out the bugs and perhaps issue a patch (as they have done in the past for the N1E). Instead I get no warning about the automatic download (happens while I am reading and set the NOOK aside for 30 minutes), and then the update KILLS my NOOK.
I am not a satisfied NOOK customer at this point.
MY POST: (from the that site)
Not Sure how to do this post or whatever, but I was happy until the update and everything that happened to you is the same with me. This is the first post that describes what happened to me. I'm out of warranty and refuse (and can't) to buy another one of these. If their updates can do this, I'm not sure I want to sink another $100 into the shareholders pockets. I'd really like to know if anyone knows what may be wrong with it.
In addition to what was already mentioned, I took the battery out several times(which seems intimidating but very easy but voids the warranty) and took it completely apart cleaning the screen very well with water and another time a glass cleaner. I tried rooting also. Not sure of what to do now. It seems software related due to working fine until the update. Still at the "Welcome to your all-new NOOK" screen with unresponsive screen. I wasn't sure if the last sentence from B&N was a personal message to me welcoming me to the "new" state of the my nook.
Thanks for any help from anyone.
Thanks.

Identical problem.... and no fix..
It is a shame you got no solution for this. and the worst, you are not the only one... it happened exactly the same with my Nook ST....
Hopeless...
Machiavelli_The_Man said:
THIS WAS A POST FROM ANOTHER SITE AS TO MY PROBLEM:
I was reading on my N2E last night. I put it down for about 30 minutes and when I came back it was displaying the default "Authors" screensaver (I had switched to the Nature photos) and asking to slide to unlock. I thought, "Oh, the new software update must have downloaded and installed. I'll check it out." To my shock, the touch screen was completely unresponsive--no amount of swiping would unlock from the screen saver. I let it set for a while longer thinking perhaps the softare update was not yet finished. No such luck.
As a result of the new update, my NOOK is now completly DEAD! I tried powering off, but couldn't do that because you are asked to confirm power off on the touchscreen, which no longer works. So, I looked online and tried the soft reset/reboot by holding down the "Home" or "n" button and then pressing the power button for several seconds. Great--it started rebooting...and came right back to the "authors" screen saver and asking to swipe to unlock. I tried this rebooting process several times, always with the same result: back to screeensaver mode with completely unresponsive touchscreen.
So, looked at the online technical troubleshooting discussion and helps and decided to try a downloaded manual install of the software update. Plugged my NOOK into my computer and it recognized it. So, I downloaded the manualo software update and dragged and dropped it onto the NOOK as directed and sure enough, it started to reboot itself. I thought, "whew, maybe this will fix it". NOPE--came right back to the locked screensaver, with no mention of attempting to update software, and the touchscreen is still dead. (By the way, all of this was done initially with the NOOK showing about 94% charged, so it was not a battery issue.)
Reconnected the NOOK to my computer and the software update file was gone from its home directory, which implies it did something with it. So, I tried repeatedly to install the software update manually, always with the same result: NOOK comes back to locked default "authors" screensaver wtih a dead touchscreen.
Looked online for B&N technical support again saw that others had this problem (though only found a couple references). Found the instructions to do a factory reset and reluctantly tried that, desparate to make my NOOK work again, but frustrated that if it did I would have to rebuild everyting on it and download my 400+ B&N book library all over again. But, guess what, factory reset just comes up to the "Welcome to your all-new NOOK" screen (sounds like progress), BUT the touchscreen is STILL dead, so I can't hit the "Next" button onscreen to proceed with setting up my factory-reset NOOK. Tried rebooting again (as this seems to be the only solution offered in the online tech support) and now it just keeps coming back to the "Welcome to your all-new NOOK" screen with a dead touchscreen keeping me from doing anything.
So, now I am taking it back to my local B&N store in hopes they will exchange it for a new NOOK.
I really want to see a feature to disable automatic updates in the future. I specifically didn't download and manually install when the update came out, figuring I'd wait for the automatic download to give time to B&N to work out the bugs and perhaps issue a patch (as they have done in the past for the N1E). Instead I get no warning about the automatic download (happens while I am reading and set the NOOK aside for 30 minutes), and then the update KILLS my NOOK.
I am not a satisfied NOOK customer at this point.
MY POST: (from the that site)
Not Sure how to do this post or whatever, but I was happy until the update and everything that happened to you is the same with me. This is the first post that describes what happened to me. I'm out of warranty and refuse (and can't) to buy another one of these. If their updates can do this, I'm not sure I want to sink another $100 into the shareholders pockets. I'd really like to know if anyone knows what may be wrong with it.
In addition to what was already mentioned, I took the battery out several times(which seems intimidating but very easy but voids the warranty) and took it completely apart cleaning the screen very well with water and another time a glass cleaner. I tried rooting also. Not sure of what to do now. It seems software related due to working fine until the update. Still at the "Welcome to your all-new NOOK" screen with unresponsive screen. I wasn't sure if the last sentence from B&N was a personal message to me welcoming me to the "new" state of the my nook.
Thanks for any help from anyone.
Thanks.
Click to expand...
Click to collapse

The factory restore does not actually fix every possible problem with your Nook.
If your Nook responds at all, try to boot it up on an SD card like ClockworkMod or noogie.
At least that way you can see what is happening.
The partitioning might have become corrupted which the "factory restore" does not touch.
If no response with anything, try disconnecting the battery.
You might also try booting over USB using the techniques in rooting the new white glow.

Hello I was wondering if I'm just screwed I bought 2 nook simple touch, one for me and one for a present to my mother for her birthday on march 16. I bought them at best buy for $40 a piece on January 30. I used mine and was perfect but when I tried to set up my mom it wouldn't load the license agreement, always got stuck or reboot or something, so I loaded cwm on an sd card just to play around, tested on my nook and was fine, then put it on my moms nook booted once then I didn't press anything and turn it off then I load the image but when I tried to boot again it got stuck on the load screen and wont do anything, no reset sequence will work with the sd card on or off the other nook boots with this sd card. at the end I exchanged with my mom she is happy with her nook an I have a useless unit do you think they will exchange it I didn't rooted it or did anything to it but has the n cwm splash on screen forever. I'm in Costa Rica right now and wont return home until May do you think I'll might be able to exchange it or should I just try to repair it.

I'm glad that your mother got the working one!
You say that that one will boot on your CWM SD card, but yours won't?
It may be hard to get your unit exchanged with a conspicuous screen on it, even if it's not your fault.
When you plug it into your desktop is there any indication of a new USB device found?
If it's charged and no amount of the power button gets a reaction, I'd open it up.

any news???
Hi endor43, same problem here, have been able to find any solution?
endor43 said:
Hello all, I'm curious to hear your thoughts and advice.
My nook is completely unresponsive. It is not stuck at rooted forever.
In fact this has nothing with a root attempt/reset/restore/power on.
I had done a a fresh reset/root with touchnooter about four months ago and was happily and smoothly reading for about two months. I then got busy and put the nook down, did not touch or use for about another two months. I tried to use it about a week ago but found that it had run out of battery in sleep after the two months of disuse (not surprising). I put it on charge overnight and everything booted right and functioned well once it turned on, except that the battery indicator in the statusbar showed a "?" and the battery info in system info showed 100% "unknown". After alot of fruitless research I put it down with the intention of reset/restore/root when I had the time.
I just picked it up this morning and was faced with the expected "Press then button below to wake up your NOOK" screen. But when I pressed the "n" button nothing happened. Obviously holding the "n" did nothing as well.
I tried to power it off and on- nothing
holding power for 20- nothing
power for 30- nothing
8 failed boots- nothing
left right- nothing
left right power-nothing
random pushing and holding of power- nothing
all these with mem card in and out- nothing
all these plugged usb- nothing
all these pugged ac- nothing
I let it charge some more- nothing
None of the buttons do anything, the screen stays inevitably at the " press the n button to wake" screen. no activity whatsoever except that when It is plugged in, the green light shows. NO ORANGE LIGHT... it is fully charged by both usb and ac.
It is not detected at all by windows anywhere.
In Linux- lsusb, bklid, and df -h yield nothing. My nook might as well be the invisible stupid ereader.
I did not drop it, sumbmerge it, perform magic around it... It has been sitting on a shelf doing nothing.
To repeat, the only thing my nook does is light up green when plugged.
It is unchangeably stuck on poe's face...
If this isn't true brick, I don't know what is.
I'm exhausted. Any ideas? I appreciate the help.
Best,
Thomas
Click to expand...
Click to collapse

There are times when a Nook gets in a mode where it won't accept a charge.
Opening it up and disconnecting the battery for a minute might fix this.

endor43 said:
That's it, thanks so much.
Click to expand...
Click to collapse
When this worked for you did the light turn orange right when you plugged the battery back in? I just took the battery out, plugged the nook into a charger, and with it plugged in plugged the battery back in and the light stays green the whole time yet I'm not able to use the nook at all.

My nook second generation is not responding to my touch I tried everything to get it to work and I eventually got it to completely power of what if it does not work when I turn it on what should I do

It could be power/battery problems.
Check to see if it makes itself known when the USB is plugged in.
If it reacts at all, that's an indication of life.

[Q] Please help! Phone is inbetween soft and hard brick!

Hey guys,
This is my first time posting, although I am constantly on the forums looking for help and ROMS. Its been about 4 months since the last ROM I downloaded for my phone. Its actually been 4 months since I did anything to my phone. I found a ROM that worked and kept with it. I have a sprint galaxy s4. fyi.
But yesterday while I was in the middle of texting on my phone it randomly shut off. When I tried to turn it back on nothing happened. Then I pulled the battery out and it rebooted showing the Samsung Galaxy S4 screen for about 3 seconds and then shut off again. I tried another working battery and still nothing. So then I pulled the battery out and try to get into the bootloader (holding down the volume up button). It said it was going into the recovery but then shut off about 3 seconds in. So then I tried holding down the volume down, home, and power button which allowed me to go to the OEM(I don't know if that's the correct term but it was a warning about tampering with the software) So I pressed volume up to continue and it immediately shut off again.
I cant get passed anything for about 5 seconds in without it shutting off. It's extremely frustrating and annoying that I literally cannot do anything with it.
Any sort of help or input would be greatly appreciated! Thanks so much in advance!

famoussas328 said:
Hey guys,
This is my first time posting, although I am constantly on the forums looking for help and ROMS. Its been about 4 months since the last ROM I downloaded for my phone. Its actually been 4 months since I did anything to my phone. I found a ROM that worked and kept with it. I have a sprint galaxy s4. fyi.
But yesterday while I was in the middle of texting on my phone it randomly shut off. When I tried to turn it back on nothing happened. Then I pulled the battery out and it rebooted showing the Samsung Galaxy S4 screen for about 3 seconds and then shut off again. I tried another working battery and still nothing. So then I pulled the battery out and try to get into the bootloader (holding down the volume up button). It said it was going into the recovery but then shut off about 3 seconds in. So then I tried holding down the volume down, home, and power button which allowed me to go to the OEM(I don't know if that's the correct term but it was a warning about tampering with the software) So I pressed volume up to continue and it immediately shut off again.
I cant get passed anything for about 5 seconds in without it shutting off. It's extremely frustrating and annoying that I literally cannot do anything with it.
Any sort of help or input would be greatly appreciated! Thanks so much in advance!
Click to expand...
Click to collapse
Make sure you have a well charged battery. Once this happened to me the phone was running hot and the little charge it had was wasted trying to get it to download mode. also having it connected to a computer/power outlet sometimes messes with the boot up. The timing of when you press the buttons also affects the loading. as soon as you see hte Galaxy S4 logo let go of the buttons. Hope this helps/.

Bombillazo said:
Make sure you have a well charged battery. Once this happened to me the phone was running hot and the little charge it had was wasted trying to get it to download mode. also having it connected to a computer/power outlet sometimes messes with the boot up. The timing of when you press the buttons also affects the loading. as soon as you see hte Galaxy S4 logo let go of the buttons. Hope this helps/.
Click to expand...
Click to collapse
I tried 2 different batteries, I also tried having it plugged into the computer, charger, anything. I've also tried different timing on the buttons appreciate the response though. I'm going to keep trying the timing of it.

Anyone have any other suggestions?

Sounds to me like it can be a defective power button which Samsung is notorious of making on their devices.

BIGSAMDA1ST said:
Sounds to me like it can be a defective power button which Samsung is notorious of making on their devices.
Click to expand...
Click to collapse
Samsung phones are under a 1 year warranty with Samsung correct?

famoussas328 said:
Samsung phones are under a 1 year warranty with Samsung correct?
Click to expand...
Click to collapse
http://www.samsung.com/us/support/service/warranty/SPH-L720

Hey BIGSAMDA1ST....thank you so much I looked at it more closely and it seems like the button half of the button is jammed up in there.

Hopefully that's what was causing the problems. ?

Same probleme here (also since yesterday)
Could you solve the problem? I had the same problem yesterday. Galaxy S4 with CM 11. Suddendly the phone rebooted and it just came to life for about 3-4 seconds after taking the battery out and in again. After a few tries it booted coorectly again. But today the same thing happened and now it's dead for about 3 hours. Now I am going to buy an external charger and try to load the battery to 100 %. I also disassembled the phoine and checked the powerbutton for functionality.

Yeah that was not the problem. lol I'm sending it to an outside company due to the face that its not under any warranty. I'm saying its bricked lol

Phone instantly reboots?

I was listening to an audiobook when my phone suddenly died. It would not start back up, so I removed the battery. When I replaced the battery, the samsung logo would pop up but after about a second it would go black again. It will not start again until I remove/replace the battery, at which point it does the one second shutdown again.
At one point I got the phone to boot (no idea what I did differently) and I noticed that it got very hot around the camera area before going black again. A second time I was able to get into recovery, where I did a factory reset. Booted back up and it seemed to be okay, but then heated up very quickly and shut down.
Now, even if the phone is totally cool, I cant get past that 1 second of samsung logo. I'm really at a loss here, and totally screwed without my phone because I am traveling non-stop for the next 2 weeks. Does anyone know how I might try to troubleshoot this? Thanks

Possibly flash a new ROM and start over. That's what I would do

This EXACT situation happened to me yesterday! I was streaming from Google music, it was on the charger and things were fine. A call came in and the phone started vibrating like crazy and wouldn't stop. The screen went black and it kept vibrating. Finally it went off. On boot it will get to my lock screen and then crash after about 30 seconds. If I take the battery out and try again it lasts another few seconds after boot. If I leave it for a LONG time with the battery out and restart it I can get like 2 mins on the next boot without it crashing. The top part by the camera is getting hot on my phone as well. Recovery mode and download mode start fine and the phone doesn't crash. I have some data on the internal that I want to save so I tried to use Odin to flash the most recent build L720VPUFNG2 as that would just install the OS and not touch the data. On the next reboot things seemed to be working fine and I got maybe 5 mins out of the phone before it crashed again. I still don't have enough time to get the data off so I think I'm just going to say screw it and wipe it completely. You guys know of a way I can backup this app data using Odin or recovery mode? My phone is currently unrooted. I'm new to all this tinkering stuff. Phone is out of warranty now anyway.

Threw on a custom recovery, backed up all my data, did a full wipe, now I am good as new.

It worked for awhile but now it is back to rebooting itself. Any idea what could be the issue? I'm assuming at this point it is hardware related. Why can recovery and download mode run consistently without crashing but when an os is fired up it has issues? If it was a hardware issue shouldn't it not work across the board?

So I had Sprint replace my phone on the 8th. I have been using my same batteries (1 stock 1 Anker) and chargers (some stock some not) without issue the past 5 days. I rooted and installed xposed and some modules (original broken phone was never rooted and was completely stock). Things were going great until tonight when it started reboot looping exactly like the old phone. I switched battery and same proble. After I took the battery out and left it out awhile it fired back up but I'm afraid the problem will return. Is it possible that the battery or charger randomly are causing damage to the phone? I only have 14 day warranty on this replacement and need to figure this out.

I have no idea maybe try just using your stock battery for a couple days. See how that goes then use your other battery for a couple days and see what happens.

i7vSa7vi7y said:
I have no idea maybe try just using your stock battery for a couple days. See how that goes then use your other battery for a couple days and see what happens.
Click to expand...
Click to collapse
I think it was one of the xposed modules causing the issue. I realized the rebooting seemed to happen whenever I pressed the power button. I had installed a power menu module so perhaps it was the cause. I restored from a nandroid and uninstalled that module and things seem to be working now. Hopefully that was the cause and this thing won't start acting up again after the return period.

killerz298 said:
I think it was one of the xposed modules causing the issue. I realized the rebooting seemed to happen whenever I pressed the power button. I had installed a power menu module so perhaps it was the cause. I restored from a nandroid and uninstalled that module and things seem to be working now. Hopefully that was the cause and this thing won't start acting up again after the return period.
Click to expand...
Click to collapse
That makes a lot of sense. Have to be careful with those Xposed modules. Don't get too carried away installing so many at one time and playing with them and then rebooting. You'll have a hard time figuring out which one is causing it. I'm pretty sure you found your problem.

i7vSa7vi7y said:
That makes a lot of sense. Have to be careful with those Xposed modules. Don't get too carried away installing so many at one time and playing with them and then rebooting. You'll have a hard time figuring out which one is causing it. I'm pretty sure you found your problem.
Click to expand...
Click to collapse
That is exactly what I did I installed like 6 at once and things were working well for a few hours then disaster stuck. I think I won't play with this phone anymore as I am upgrading anyway and want to sell it in working order.

So things were going well for awhile and then the reboot loops started up again. I did some digging and read that apparently Samsung phones are notorious for sticking power buttons and the symptoms were exactly what I was experiencing. I watched some videos online how to open the phone and clean out the power button but it didn't make a difference. I then read that squeezing the connector for the power button with a pair of pliers sometimes does the trick. Not for me. So finally since I'm not under warranty, have no insurance, and the phone wasn't working anyway, I just ripped the white plastic part of the power button right off. Well, that seemed to do the trick. Phone immediately fired back up without issue and has been going strong. I glued a small thin piece of plastic where the old one used to be and I am back in action. If my little plastic piece solution eventually fails or breaks off I will consider soldering on a new button but so far so good.
If you have tried everything else, and are looking for last resort, try cleaning the power button with some alcohol, and if that fails, rip off that power button! Here is the video that gave me the idea: https://www.youtube.com/watch?v=3Glllc7bEJs and here are some other power button videos: https://www.youtube.com/results?search_query=s4%20power%20button&search_type=&aq=f&oq=

S4 randomly shutting off and not turning back on.

A friend has an S4 GT-I9505. It was bought second hand few months ago.
Lately it has been acting up. Shutting down randomly but now it won't turn back on. We sometimes manage to get it back on, but no always.
It isn't the battery since I have inserted my battery into the phone and it still won't turn on. It won't turn on even when connected to the charger.
We figured it might be the power button so we took it to a guy to check it out. The guy took the phone apart looked at the button and said the button is ok.
He put the phone back together and it somehow worked without problems for a few days (up until now).
He said that the phone might be shorted somewhere. The thing that led him to that conclusion is that he noticed that when inserting the battery the phone would try turn on without pressing the power button.
He also said the boot might be dead because the phone won't go into recovery nor into download mode. Even if it manages to boot into them, it will turn off almost immediately sometimes.
The phone is running 5.0.1 GPE custom rom with Googy-Max kernel. No tweaks or mods.
I know this sounds a lot like a hardware problem. The only thing that makes me have doubts is that it works occasionally without any problems.

He looked at the power button. Honestly it's no surprise he didn't find anything wrong with the power button because the problem with the power button is inside the tiny metal casing making up the button, and it's something that can't be seen.
Get a second opinion from someone other than the guy you took this to. However, I believe this to be a power button issue, easily fixed by replacing the button.

As I said, He took the phone appart, took the motherboard-logic board, whatever you want to call it, out and looked at it. He also took that tiny metal casing that forms the power button out, leaving a tiny white "something" exposed. I guess that's what you're talking about
But I really hope you're right and it's the power button.
Edit: We were the whole time there while he took the phone apart and looked at it. So we saw everything he did. And he didn't do anything special except take it apart and put it back together and it somehow worked for a few more days.

I guess it really is the button. I managed to change the rom, kernel, bootloader. The phone booted up. I pressed the button once to lock the screen but nothing happened. 1 second after that the boot menu appeared. The next second the phone shut down and now it won't turn on again. Except for a brief moment to show the S4 screen and then turns off again.

Nexus 6p - bricked?????

Hi all,
Hopefully this wasnt covered before- I used the search function and it didnt return any results, at least not for my specific scenario.
I've had this 6p for about 18-20 months roughly. Been my best phone by far, and I've been very happy with it(normally i replace my phones every 8-12 mos because I need the latest and greatest lol).
About six months ago I threw PureNexus on there with I believe Flash kernel. Worked flawlessly, and I've been really happy with it.
About a week ago, it powered off on its own but i had it in my back pocket so I just assumed it was an accidental reboot. However, this morning, I woke up, threw it on the charger for about 30 minutes, got to about 60%, and unplugged it. While I was using the browser, it froze up for a minute then shut down. No bueno. Cannot get it to power back on. No power light while charging. I did what others have had luck with, holding power, and/or power/down for several minutes, still nothing.
I reached out to Project Fi, and they want a 500 dollar hold to send me out a refurb replacement. I know they release the funds in approximately 12 days but we had a recent death in the family and I just cannot afford to have 500 bucks locked up, especially right now. Spoke w a supervisor, apologized, but said nothing they can do.
On a whim, I plugged it into the pc, and it DOES detect it but its the dreaded QHSUSB_BULK under 'other devices'. So that tells me its at least got power, but, I'm unsure if just trying to use adb(i havent in a while, not since i did the initial rom install but im sure i can find instructions) to attempt to throw the base image back on there, will work, or which direction to go.
I found this but I dont think its for my specific phone but thought maybe there was a set of instructions for this particular phone similar to these:
https://forum.xda-developers.com/nexus-6/general/fix-fix-qhusbbulk-cm12-t3059518
I have seen several reports of this error happening when flashing the wrong rom, or using the wrong image, but never just all of a sudden when its been running like a champ.
any thoughts? thanks in advance.

Nexus 6p is plagued with issues like shutting down at certain percentages and the dreaded bootloop of death. You could get in contact with Google heard even people out of warranty having success. Could also have a shop replace the battery in some cases that fixed the shutdowns.

If it doesnt boot up at all I can't help you. If you can get to bootloader, flash stock image, un-root, re-lock your phone. see if it boots. I had to do all this, this morning. Phone would just shut off at 80%, reset and hang at the google sign. I could only get to into the main system with a hard reset every time. then it would reset and lock up. So i reverted it to stock and we will see how it goes. So far its been 6 hrs and no random resets and its in full use.

Yea, the problem is, I cant. Its not even a boot loop. Just looks like its dead. Held the power button down for roughly 10 minutes out of desperation.
The odd thing is, if i plug it into my pc it shows how i mentioned in my initial post. So it must have juice even though the power light/etc isnt on and it doesnt show charging.
Last hope I think i have is to run it out of battery leaving it on the table, then hope somehow when i plug it into charge, that resets it somehow since it was dead, and maybe clears whatever the issue is. Very odd considering it was working fine until this.

Your phone is stuck in the EDL mode when its detected as QHSUSB__BULK. There are solution for this but i dont know if this solution is combined with data loss or not and i try to find that out recently. I also still dont know how to fix that with linux.
Here two howtos:
https://forum.xda-developers.com/nexus-6p/general/guide-how-to-bring-to-life-dead-nexus-t3581948
https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838