Long story short. On my 3rd MXP. 2 previous defective. But had custom ROM backups saved to external sdcard. So now that sdcard is in new MXP. I am not able to see old backups on sdcard in twrp through restore tab, but I can see them from install tab. Can you restore backups from one MXP to another? If so how? Tried moving backups to internal still nothing. Never had to try this as I never had to return phones and restore backups on replacement.
jmileti said:
Long story short. On my 3rd MXP. 2 previous defective. But had custom ROM backups saved to external sdcard. So now that sdcard is in new MXP. I am not able to see old backups on sdcard in twrp through restore tab, but I can see them from install tab. Can you restore backups from one MXP to another? If so how? Tried moving backups to internal still nothing. Never had to try this as I never had to return phones and restore backups on replacement.
Click to expand...
Click to collapse
No no no don't do that or you will end up with issues as those backups include files that are device specific like IMEI and Mac address. And once you over write them you can't get them back
zelendel said:
No no no don't do that or you will end up with issues as those backups include files that are device specific like IMEI and Mac address. And once you over write them you can't get them back
Click to expand...
Click to collapse
I thought so. Every phone seems to create a different back up folder with some subfolder under different file name. Gonna delete and rebuild my backups.
Related
Is it possible to have multiple NANDROID backups at once? The only thing I can see that would resemble this is via ROM Manager, where it let's you do multiple backups but I'm not sure if these are NANDROID backups.
It would be cool to have all ROMs installed and as backups, so that it's easier to go from one to another while testing and deciding on which one to use as your daily driver.
I have three different nandroid backups on my SD card currently.
HondaCop said:
Is it possible to have multiple NANDROID backups at once? The only thing I can see that would resemble this is via ROM Manager, where it let's you do multiple backups but I'm not sure if these are NANDROID backups.
It would be cool to have all ROMs installed and as backups, so that it's easier to go from one to another while testing and deciding on which one to use as your daily driver.
Click to expand...
Click to collapse
You can have multiple backups in amon ra or clockword. Clockwork/Rom Manager let you rename backups.
chazglenn3 said:
I have three different nandroid backups on my SD card currently.
Click to expand...
Click to collapse
Sweet! So you did them straight from Recovery or via ROM Manager?
Yes, that's the beauty of it. Just wipe and restore to any setup you have backed up. However many you want, however different.
Sent from my PC36100 using Tapatalk
adelaney said:
Yes, that's the beauty of it. Just wipe and restore to any setup you have backed up. However many you want, however different.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
donatom3 said:
You can have multiple backups in amon ra or clockword. Clockwork/Rom Manager let you rename backups.
Click to expand...
Click to collapse
Man, how have I lived without doing this! hahahah I guess because I've been living on CM6 ever since the first nightly was released. But I am going to give it a shot too. Thanks.
HondaCop said:
Is it possible to have multiple NANDROID backups at once? The only thing I can see that would resemble this is via ROM Manager, where it let's you do multiple backups but I'm not sure if these are NANDROID backups.
It would be cool to have all ROMs installed and as backups, so that it's easier to go from one to another while testing and deciding on which one to use as your daily driver.
Click to expand...
Click to collapse
Yes.
Open up your nand backup file, usually named "nandroid" you will find the last 5 or so backup with date and time used to name the files. The Recovery program may have a limit on how many it keeps at once (i.e. last 5...) However if you're trying to back up specific ROM's you may want to copy and paste these to another area of the SD Card so that they are not overwritten in subsequent backups. You can then move them back (in the event that they are overwritten) to the nandroid folder to restore.
-kp
You can use nandroid to make as many backups as you want as long as you have room on your SD card. It is also safe to rename by mounting your SD card and going to the nandroid folder and renaming each one.
HondaCop said:
Man, how have I lived without doing this! hahahah I guess because I've been living on CM6 ever since the first nightly was released. But I am going to give it a shot too. Thanks.
Click to expand...
Click to collapse
Right now I have a Sprint 1.47 rom with root access, a DC 3.2.3 rom and the latest CM6 nightly all as Nandroid backups. Once the official Froyo update comes out and is given root access by someone here I will replace the Sprint 1.47 with that and have those three backups.
Captainkrtek said:
You can use nandroid to make as many backups as you want as long as you have room on your SD card. It is also safe to rename by mounting your SD card and going to the nandroid folder and renaming each one.
Click to expand...
Click to collapse
I use Amon's recovery and I renamed 4 of my backups a few days ago. They won't restore now, I'm getting the "run from mobile-sh" error
Im trying to restore a copy of my droid x system from this AM.
but as its copying the Data portion, i get into a file that it hangs on part of "casino" a .jpg, causes the whole thing to lock up and stop responding.
Anyway I can fix this backup? I have another backup but it restores the whole data section in 2 minutes...it doesnt seem to work either (((( Help!
apparently karma is not my freind this week
my backup was cut short due to lack of space on the SD card and CWM didnt notify me
kodakeos said:
Im trying to restore a copy of my droid x system from this AM.
but as its copying the Data portion, i get into a file that it hangs on part of "casino" a .jpg, causes the whole thing to lock up and stop responding.
Anyway I can fix this backup? I have another backup but it restores the whole data section in 2 minutes...it doesnt seem to work either (((( Help!
Click to expand...
Click to collapse
Do you have any other backups you can restore to? I would recommend taking a backup of where you are at right now, even though you obviously want to restore to an earlier point.
If all of your backups are having the same issue, you may have a corrupt SDcard or a corrupt file that is sitting in your /data partition. This is not a definite, so don't freak out, but if you see the same result with many/all backups, I would look into this.
If you can deal with wiping your /data partition... I would take a backup of your current setup, then wipe /data... Then try restoring that backup... If it works, then I would be inclined to believe that one jpeg file may be corrupt, and is causing problems for any backup that has that file in there...
This is just a speculation from the info you have provided and around 6 years of IT work....
EDIT: NEVERMIND! It looks like you posted again while I was typing up my guess, looks like I was off! LoL
yea i was basically able to salvage most of it between the system of one, with the data of another. so im about 75% back to where i was.
obviously i need to either a: keep less stuff on my SD card, or B: use my spare 2gb card for backups...
One thing you may want to try if you are running out of space from lots of Clocwork backups...
Create a folder on your PC/Mac and copy off the folders in the yyyy-mm-dd-hh-mm format and copy your backups from your SDcard onto your computer. Then you could delete them off of your sdcard. When I started making a lot of backups I was running out of room and copied some off. Then I deleted them off my sdcard. I have tested moving them back on, and restoring one that was on my PC, and didn't have any issues!
Just a thought...
This is probably a really dumb question but how do I use the backups I've created?
When I flash a ROM that I don't like and I try to restore to an earlier backup I've created it is not working. It either says something about the MD5sum or just aborts in general...
What process do I take in order to restore the phone to an earlier backup?
And better yet, if I install a new ROM and don't want to go through the process of installing all my apps again is there a way to just restore my files from a backup?
You can do an advanced restore and restore only data to get your apps, etc. back. There is also titanium backup that is great for backing up and restoring between roms (the only way to restore apps when using a different rom... restore data from one rom onto another can cause serious issues).
If you're getting MD5 sum errors, the backups are being corrupted. So unless your messing with them on your sdcard, then there may be some bad areas on that sdcard and it might be time for a new one.
danaff37 said:
You can do an advanced restore and restore only data to get your apps, etc. back. There is also titanium backup that is great for backing up and restoring between roms (the only way to restore apps when using a different rom... restore data from one rom onto another can cause serious issues).
If you're getting MD5 sum errors, the backups are being corrupted. So unless your messing with them on your sdcard, then there may be some bad areas on that sdcard and it might be time for a new one.
Click to expand...
Click to collapse
Wait so in order to keep my apps I can go to advanced restore and restore only data but it could cause serious issues? So basically it is possible but risky?
and normally should my restore points flash just like a rom when I go to "Restore"? do I need to wipe everything before I restore?
I did copy and paste them onto my computer so I had them in two places... maybe that corrupted them. Anyways a new, bigger, faster SD card is in the mail so that's kind of a coincidence.
a restore in clockwork is an image restore, so everything in that partition will be wiped anyways.
So I am not even a week into rooting my Evo and flashing roms and I am not sure what the best way to organize my backups are.
What do you guys do to manage all the nandroids and app backups in Titanium?
Here is my situation, I have my nandroids from right after rooting and a few from doing the two updates that CM7 had. I first did a nandroid or two using CWM, I then flashed recovery to Amon_Ra and did nandroids in their also. I also had all my apps backed up using TB post-root (sense) and now that I am on CM7 I have many different apps that I have added. I have read some people say not to backup apps from 2.2 on sense to CM7, though the few that I have done work fine.
Should I delete all the backups in TB from my stock 2.2 w sense? Can I rename my RA nandroid backup files so that I can label them better to know what they are? Or should I just move them to my computer and put them in a folder named what they are and leave the file name alone? Can I move the backup folder from TB onto my computer that has my sense backups to save for a rainy day?
I can see this getting very messy and confusing if I do not get a handle on all these backup files. Just wondering if someone has a good system for keeping track of these and when to get rid of nandroids and app backups.
Thanks!!!!
i just created folders named clock and amon ra on my computer, and inside those folders i created folders with the names of the roms i flashed with each recovery and then i moved the nandroid files from my sd card into the computer folders that corresponded, and i only left my last working backup on my phone
- clear your TB and start fresh. i would advise against trying to criss cross your Sense/AOSP backups. it may work but i'd consider it a fluke not the rule.
- you cannot restore a RA nandroid with CWM nandroid and viseversa. so whichever one you think you'll stick with...you can get rid of the others.
- yes, you can rename the nandriod folder. no spaces. very handy once you get a few nandroids going.
- i use SyncToy from Microsoft to copy all the sdcard data onto my pc. this way i can protect my nandroids, pics, vids, mp3, misc crap.
i normally leave one or two nandriods on my device (i have had a bad nandroid in the past) and zip of the current rom.
as for the deletion policy..that depends on your level of paranoia and amount of available diskspace and time.
DraginMagik said:
- clear your TB and start fresh. i would advise against trying to criss cross your Sense/AOSP backups. it may work but i'd consider it a fluke not the rule.
- you cannot restore a RA nandroid with CWM nandroid and viseversa. so whichever one you think you'll stick with...you can get rid of the others.
- yes, you can rename the nandriod folder. no spaces. very handy once you get a few nandroids going.
- i use SyncToy from Microsoft to copy all the sdcard data onto my pc. this way i can protect my nandroids, pics, vids, mp3, misc crap.
i normally leave one or two nandriods on my device (i have had a bad nandroid in the past) and zip of the current rom.
as for the deletion policy..that depends on your level of paranoia and amount of available diskspace and time.
Click to expand...
Click to collapse
Thanks, I like the idea of clearing out TB (I just did it) I was just worried removing the files would somehow mess up the TB app.
Sticking with Amon RA and I knew about not being able to use nandroids from different recoveries.
I will checkout synctoy, sounds cool, I already have three folders of my entire SD card that I made during my rooting process and changing recovery process. I hate it, I don't know what I need to keep from them.
Thanks for the input
Using the newest CWM recovery touch, I'm trying to make a backup before jumping to AOKP (hooray!) But.... My backups are tiny; about 15mb. I'm not sure how big they should be (the one I made immediately after rooting was 880mb) but I'm certain this is too small. Anyone have any idea what I'm doing wrong? Thanks in advance.
If you've used an older version of CWM, I'm sure you're used to ~1GB backups. In 6.0 and above, backups are handled differently. A good portion of backups are put into these "blob" files and then a smaller backup is made for each specific backup. The theory is that if you have multiple backups, they can pull data from the blob files instead of duplicating things that haven't changed. Whatever you do, DO NOT delete these blob files, doing so will corrupt your backup.
meijin3 said:
If you've used an older version of CWM, I'm sure you're used to ~1GB backups. In 6.0 and above, backups are handled differently. A good portion of backups are put into these "blob" files and then a smaller backup is made for each specific backup. The theory is that if you have multiple backups, they can pull data from the blob files instead of duplicating things that haven't changed. Whatever you do, DO NOT delete these blob files, doing so will corrupt your backup.
Click to expand...
Click to collapse
Thank you! I was so confused by this. So if I want to transfer my backup to my laptop HDD, I now need to copy the entire Clockworkmod folder? (and this will have all of the files necessary for a full backup?)
slack04 said:
So if I want to transfer my backup to my laptop HDD, I now need to copy the entire Clockworkmod folder? (and this will have all of the files necessary for a full backup?)
Click to expand...
Click to collapse
Unfortunately yes, the new blobs system means it will take a longer time to make a copy of your backup, it's horrible over Wi-Fi. I just didn't bother with it and went with TWRP instead.