Hey everybody,
I've been having an issue lately. Since I upgraded to Android Lollipop, I have not been able to get a GPS lock anymore. This issue only applies when I'm on a Lollipop ROM. As soon as I flash back to a kitkat TW ROM, everything works again. When I go back to a Lollipop ROM, the issue returns again.. No GPS lock. This is not ROM specific, but just related to Lollipop in my experience.
I have not seen anyone else yet with this issue, so I find this very strange. I'm currently on the latest version of GPE5 by @Danvdh if this helps. But like I mentioned before, the issue exists on every Lollipop ROM.
If someone could please help me, this would be very much appreciated! Thanks!
Anyone? ?
Me Gusta!
It seems to be a Lollipop thing.
I have the same issue with my Find 7 since installing Lollipop.
See this discussion:
https://code.google.com/p/android/issues/detail?id=81140
Me Gusta said:
Anyone?
Me Gusta!
Click to expand...
Click to collapse
mate, flash official firmaware and reset /set up your original csc with samsung phone info+ app from google play , worked on 3 phones until now this solution , be carefully csc reset gonna wipe your internal storage
thanks, i will try it
Hello I am new here so bare with me about noobie questions
I have a galaxy s5 g900m which was on stock 4.4.2 KITKAT with root
So i wanted to update to lollipop so I downloaded a stock rom from sammobile with lolipop and flashed with ODIN
Phone boots up fine everything works except for 1 thing
There is no signal- meaning that it shows a signal for a few seconds and losses connection repeat all the time
Tried reflashing and wiping entire phone from recovery with no help
Before the rom flash It worked flawlessly!
Any ideas?
Need a solution fast!
Thank you
guyrulz said:
Need a solution fast!
Thank you
Click to expand...
Click to collapse
I had this problem as well when I installed Lollipop on my rooted G900F (BTU), I solved it by doing a Factory rest then re-installing the Lillipop rom using Odin and doing the Factory reset again after the second install.
It has been fine ever since
Hi guys
I came from jamal rom v40 s5 port for note 3 on android 4.4.2 and i tried android lollipop resurrection remix and it was great but i decided to return to touchwiz to try s6 port.. i installed it and everything worked fine, except for recording video: when i tried my phone reboot, everytime and also with other application like whatsapp or other camera application.. i can take photos but not video. I tried other rom 5.0 touchwiz and the result is the same, but with aosp rom it works.
what can i do? My friend has the same rom i want to install (dark lord s6 port) and he can take videos so i know that it's my phone's problem. how can i resolve? I want you to know that i can't take video with every touchwiz lollipop rom and every kernel.. i can't understand why
please help me
So I solved it by:
Using Odin 3.11.1
I have already tried Factory reset, wipe cache, wipe dalvik, flashed the latest stock Lolipop or older lollipop with ODin and nothing solved the problem.
So I tried to flash the latest stock lolipop with Odin and marking checked (Auto Reboot , F. Reset Time , Phone EFS clear, Phone Bootloader update).
I suspect that the Phone EFS clear did the trick. It's function is related to the modem and radio of the phone. And clearly the modem has a problem here.
I hope this will help anybody out there having this issue.
This problem happened after trying to flash lollipop using FlashFire app to reserve the root that I had in my previos Android KK 4.4.2.
Phone: Galaxy Note3 N9005 Malaysian
I just updated my phone to OK1 firmware running on 5.1.1. This si the China variant and not hong kong. I was wondering if there is a working root for this firmware? I've tried the CF auto root of the 4.4.4 version but it sends me into a bootloop. I've searched everywhere but can't find anything. Any help will be appreciated.
I can't root N9100 android 5.1.1 (N9100ZCU1COK1) by root file CF-Auto-Root-trltechn-trlteduoszc-smn9100.zip for android 4.4.4.
Then is there no way to root for that firmware?
anyone? desperately need Gapps on my phone right now...
Hi. I have installed an aurora rom with version 5.1.1 N9100ZCU1COK1 and I'm rooted. But I just kept the root that I had before updating so I didn't use CF-Auto-Root or anything else this time... have you tried kingroot?
Deviatorz said:
anyone? desperately need Gapps on my phone right now...
Click to expand...
Click to collapse
If your n4 is sm-n9100, bought from China, you can directly flash TGY n9100 rom, I got my n4 couple days before(SM-N9100, trlteduoszh), original rom is China version: N9100CHC1COK1-5.1.1, then just download TGY rom, N9100ZZH1BOF2, which is the latest TGY rom, android version: 5.0.1. After odin flash, do doubble wipe, then everythings just fine. like the orignial hongkong N9100, of casuse you get the stock google apps.
I got ota information yesterday, tgy rom got update to N9100ZHU1COL2-5.1.1, I'm not sure to do update, cos I'd heard 5.1.1 won't get root for the new "reactivation lock" issue, anyone have experience of root your tgy 5.1.1?
Chainfire has a new autoroot for N9100 5.1.1. You can download it HERE
ryanxiao said:
If your n4 is sm-n9100, bought from China, you can directly flash TGY n9100 rom, I got my n4 couple days before(SM-N9100, trlteduoszh), original rom is China version: N9100CHC1COK1-5.1.1, then just download TGY rom, N9100ZZH1BOF2, which is the latest TGY rom, android version: 5.0.1. After odin flash, do doubble wipe, then everythings just fine. like the orignial hongkong N9100, of casuse you get the stock google apps.
I got ota information yesterday, tgy rom got update to N9100ZHU1COL2-5.1.1, I'm not sure to do update, cos I'd heard 5.1.1 won't get root for the new "reactivation lock" issue, anyone have experience of root your tgy 5.1.1?
Click to expand...
Click to collapse
hey thanks for your reply. i actually installed and tried aurora Rom and its been working well. however, my signal is not that great (rogers) and im sure its because of the baseband. ill try that rom and see how well its works.
my ROM is using 5.1.1. i dont have the reactivation lock issue
rjma said:
Chainfire has a new autoroot for N9100 5.1.1. You can download it HERE
Click to expand...
Click to collapse
Could you help me add link download file recovery TWRP or CWM for 5.1.1 after rooted ?
mabu_210 said:
Could you help me add link download file recovery TWRP or CWM for 5.1.1 after rooted ?
Click to expand...
Click to collapse
Check post #60 in THIS thread.
SM-N9100 runing Adroid 5.1.1 rooted successfully.
I followed the following link and successfully rooted mine without any problems.
(sorry. I'm not allowed to post an outside link. Google "How to root Samsung Galaxy Note 4 SM-N9100 Android Lollipop 5.1.1" and you should be able to find the article on recovery-mode.com)
Good luck!
I recently bought N9100 in china and then I flashed my new phone with the latest stock rom N9100ZHS1CPE1 (Hongkong) android 5.1.1 via odin. Worked perfectly. No issues.
rjma said:
Chainfire has a new autoroot for N9100 5.1.1. You can download it HERE
Click to expand...
Click to collapse
Hi, I used the CF-Auto-Root downloaded from this link but it didn't work, I had to reflash the stock ROM to be able to boot the phone. Pls help, I need root badly.
seunskills said:
Hi, I used the CF-Auto-Root downloaded from this link but it didn't work, I had to reflash the stock ROM to be able to boot the phone. Pls help, I need root badly.
Click to expand...
Click to collapse
If you now have 6.0.1 rom, try THIS CF-Auto-Root for 6.0.1
rjma said:
If you now have 6.0.1 rom, try THIS CF-Auto-Root for 6.0.1
Click to expand...
Click to collapse
Thanks for your reply rjma, I had 6.0.1 and I used CF-Auto-Root for 6.0.1 to root but it didn't work, it got stuck on boot screen with some errors. That's why I downgraded to 5.1.1 because 6.0.1 doesn't have google appps.
seunskills said:
Thanks for your reply rjma, I had 6.0.1 and I used CF-Auto-Root for 6.0.1 to root but it didn't work, it got stuck on boot screen with some errors. That's why I downgraded to 5.1.1 because 6.0.1 doesn't have google appps.
Click to expand...
Click to collapse
THIS tutorial is for oneplus 2 but you can use it to Note4. This is what I followed and worked for me.
rjma said:
THIS tutorial is for oneplus 2 but you can use it to Note4. This is what I followed and worked for me.
Click to expand...
Click to collapse
I eventually rooted the phone and it's too easy to be true. I downloaded it's specific twrp, flashed it via Odin without the battery so it won't boot up after flashing, then boot into twrp recovery and flashed SuperSU.
seunskills said:
I eventually rooted the phone and it's too easy to be true. I downloaded it's specific twrp, flashed it via Odin without the battery so it won't boot up after flashing, then boot into twrp recovery and flashed SuperSU.
Click to expand...
Click to collapse
I have the exact same problem
what version of supersu did you flash?
Deviatorz said:
hey thanks for your reply. i actually installed and tried aurora Rom and its been working well. however, my signal is not that great (rogers) and im sure its because of the baseband. ill try that rom and see how well its works.
my ROM is using 5.1.1. i dont have the reactivation lock issue
Click to expand...
Click to collapse
N9100 only supports B7, it does not support B2 and B4. And this is the reason why you get a weak signal (B7 is high frequency with poor coverage).
Using the custom recovery posted above I managed to get root. just boot in download mode and remove the battery after that, flash twrp recovery from above link with odin (you can make a flashable .tar.md5 yourself or just use this one:
https://mega.nz/#!xNslVYLa!zDQdqxVyam7H2Q8xzvZnyQ7DyhPqy2jgs1TE1fLEJjo
. put the battery back in and boot into recovery, copy the supersu.zip (I used the latest one from this link: https://download.chainfire.eu/1012/SuperSU/SR3-SuperSU-v2.78-SR3-20161103171345.zip?retrieve_file=1 , but you can use the latest one). Flash it and reboot normally. Don't let twrp root your phone (it will ask you to root when you select "reboot system" from recovery, just select don't install root, or something like this).
Note that the above rooting method worked for the latest 5.1.1 firmware (from 10 October 2016) for Hong-Kong, PDA N9100ZHU1CPI3, CSC N9100ZZH1CPI3.
You can download the firmware from here: http://www.sammobile.com/firmwares/download/102145/N9100ZHU1CPI3_N9100ZZH1CPI3_TGY/
Also, that firmware fixed some rotation issues I had with the previous one.
Hi,
Wonder if anyone has come across this issue before. While Galaxy S5 (SM-G900F) BTU was on Lollipop, I could flash what ever custom roms I wanted. However since updating to MarshMallow 6.0.1, any custom rom I install results in constant resets on boot.
So instead of boot looping its reset looping. I can see for some reason it will not create Cache / Dalvik Cache mounts, maybe that has something to do with it, I dont know. I know I have spent hours trying to work out issue.
because of bootloader/cp. you have to flash lollipop ones if you want to intall any branch of cm. cm13 will work with MM bl/cp eventually
oia12344321 said:
because of bootloader/cp. you have to flash lollipop ones if you want to intall any branch of cm. cm13 will work with MM bl/cp eventually
Click to expand...
Click to collapse
Hi,
I think I tried going back, will give it another. Any BL / CP you recommend?
for me it worked (be sure to check update bootlader in odin). i used the latest one for lollipop from Alexander thread.
oia12344321 said:
for me it worked (be sure to check update bootlader in odin). i used the latest one for lollipop from Alexander thread.
Click to expand...
Click to collapse
I was searching and searching without answer. Now works, .
Every time I searched for anything with reset in it, it kept giving me bootloop threads, .