Hello Everyone,
I'm sure this has been covered before and a lot of you already know about or have already activated your Notification LED on your Nexus 6. This thread is for people who did not know about the LED or don't know how to activate it.
So, the Motorola Nexus 6 has a RGB Notification Light. It is placed inside / beneath the top speaker. Motorola / Google decided to disable it in favor of the Ambient Display feature. Why would they not still leave it available as an option? I have no idea. It is pretty easy to activate it though. Here is what you need to do.
1. Your Nexus 6 must be rooted.
2. Download Light Flow Lite (FREE) on the Google Play Store.
3. In the Light Flow App, go into Settings, then Device Settings and Root. You must select the following options: Direct Mode, Root Mode, Run every command as root. If all three of these are not selected, your LED will not work.
4. Now just go into Notification Settings in the Light Flow App and you can fully customize your Notification Light.
For example, I have my Notification Light set to turn red while charging and green when fully charged. When I unplug my phone, the light goes off instantly. I also set red for missed calls, green for text messages, and blue for emails (Gmail). This is sufficient for my needs but you can also setup specific app notifications as well like Facebook, Twitter, Snapchat, etc. You can even set the cycle timings for when you have multiple notifications.
The only issue with the Notification Light in the Nexus 6 is that you can not make it blink. It will stay on / solid until you clear the Notification. I don't believe this will effect battery life too much, especially being Light Flow gives you control of the brightness of the LED. Also, Light Flow gives options for other various colors such as orange, purple, white, etc. I have only gotten Red, Green, and Blue to work so far. I am currently looking into this.
This method works whether you are stock or even if you have a custom kernal / rom. There are quite a few custom roms for the Nexus 6 that activate the LED as well.
I have decided to post this because when I looked into activating my Notification Light on my Nexus 6 I came across a few methods, and this is the only one that worked.
Also, most importantly, all of the guides / people I have talked to about activating the LED on the Nexus 6 that direct you to Light Flow claim you need the paid version and you do NOT. If this use to be the case it is not anymore. I have full control of my LED and I do NOT have the paid version of Light Flow.
There are dozens of ROMs to download that already have the notification light working... So I guess this really only pertains to those who buy a Nexus and wish to remain completely stock except for these mods? In which case, same a custom ROM but they are doing the mods themselves.
EniGmA1987 said:
There are dozens of ROMs to download that already have the notification light working... So I guess this really only pertains to those who buy a Nexus and wish to remain completely stock except for these mods? In which case, same a custom ROM but they are doing the mods themselves.
Click to expand...
Click to collapse
I agree. I have had my Nexus 6 for about a month myself. I have not tried out any custom roms yet. I like keeping it simple / stock. I just wanted my Notification Light is all. This thread is more directed at stock users I guess.
I can only get Red, Green, and Blue colors though.
idbl_fanatic said:
I can only get Red, Green, and Blue colors though.
Click to expand...
Click to collapse
Same here. I believe that is all the light is physically capable of producing. I think that is the outcome regardless of the method used. (Light Flow, Custom ROM, etc)
Related
I've written an app that can enable and disable the blue led with a toggle. I would like to know for who this works. Please test it and tell me .
Old Post:
ChaosR said:
For some reason my Desire went buggy and crashed at some point. However something amazing happened.
Contrary to popular believe, there are more colors than red, green and orange. My Desire's LED flashed blue and purple. Now I searched the forums and could not find any topic that confirmed this, nor on google, so just to let you guys know .
Next point on the list is finding an application that can tweak them
Click to expand...
Click to collapse
EDIT: Seeing the recent activity in this thread, I want to tell you this app was written a long time ago. It does not function on any recent roms. There are loads of other apps out there that can control your led.
Picture ??
lennshow66 said:
Picture ??
Click to expand...
Click to collapse
Gheh, it only showed for like a few seconds, then the phone restarted, I will try to replicate the bug, but I expect I will be unsuccessful .
Interesting. I got my Desire yesterday and installed the Touchdown app for corporate connectivity. In TD's settings you can customise the LED behaviour to select different colours (beyond red, green and amber) for different events. Tried it and it just flashed green, but why have these settings if there's not a way to do this...interesting
I have been able to replicate the bug. This is how I do it:
1. Turn on Bluetooth
2. Receive a text message while charging
3. Disconnect from charger
4. Turn off screen
5. Reconnect to charger
6. My led will glow purply
7. Disconnect the phone from the charger
8. Led starts flashing blue, orange and purple
9. Phone reboots
Taking pictures as we speak
Re: MultiLed Colors
I have been able to replicate the bug. This is how I do it:
1. Turn on Bluetooth
2. Receive a text message while charging
3. Disconnect from charger
4. Turn off screen
5. Reconnect to charger
6. My led will glow purply
7. Disconnect the phone from the charger
8. Led starts flashing blue, orange and purple
9. Phone reboots
Taking pictures as we speak
Click to expand...
Click to collapse
Interesting. Get these pics up ASAP lol
-------------------------------------
Sent via the XDA Tapatalk App
I've added the images. It was too hard to take a picture of the blue color. But at least here is purple.
PS. images are in the first post
EDIT: Also, I should add, I have been unable to duplicate the color for a second time. No idea why it happens. Just happy I was able to get these pictures
i did what you said. no special colors but strange things happens. no reboot
Re: Notification LED Multicolor (Picture of purple included)
Looks like the desire does some how support multi colours :S there must be a way to enable this fully within the codes. I will be donateing if the devs can get this to fully work
-------------------------------------
Sent via the XDA Tapatalk App
Re: Notification LED Multicolor (Picture of purple included)
I have to say u r pretty legendary to find that bug.
-------------------------------------
Sent via the XDA Tapatalk App
supasye said:
I have to say u r pretty legendary to find that bug.
Click to expand...
Click to collapse
I have tried and tried and I have been unable to replicate this bug from this point on. I'm so happy I was able to take the pictures. I think it's because of a semi-faulty flash that I have this bug. Even though the randomality of it suggests it might be more of a hardware bug. We do however now know it has a blue led too. So cyan and white should be possible as well. I just wonder, why go through the trouble of a adding a full multicolor led, if you are only going to use 3 colors of the possible 7.
there might be something as simple as a voltage problem.
most leds will change color when you increase voltage and/or overload them.
the first few times you won't see any damage, but eventually the changing color might be permanent and then it's just a matter of time before the led just brakes.
so there is a change that it's not multi color, but the phone just overloads the led while crashing.
When I looked down the headphone port I could clearly see the red and blue led burning. I do really think there is a blue led in there.
Re: Notification LED Multicolor (Picture of purple included)
When I looked down the headphone port I could clearly see the red and blue led burning. I do really think there is a blue led in there.
Click to expand...
Click to collapse
Legend: D
-------------------------------------
Sent via the XDA Tapatalk App
Haa nice one mate
Well we know there is a Red and Green led for definite so having a Blue as well means we have multi colour. Now we just need a way to use it
There's no way that type of colour came from overloading the phone as when an LED overloads it just blows, it doesn't change colour to that extent.
Re: Notification LED Multicolor (Picture of purple included)
Well we know there is a Red and Green led for definite so having a Blue as well means we have multi colour. Now we just need a way to use it
There's no way that type of colour came from overloading the phone as when an LED overloads it just blows, it doesn't change colour to that extent.
Click to expand...
Click to collapse
Agreed lol. Just need the devs to add the code somewhere to enable this colour
-------------------------------------
Sent via the XDA Tapatalk App
This should really be moved to the dev section, let the guys play with it, i dont think too many devs trawl through the ****e on the general forum, with questions like "how do i make a call on my phone".. lollol
Start a new thread on the dev section, im sure this will be picked up by one of the wizzes
JD
Heh, I'm sorry guys, but we already know there's a BLUE led inside.
This LED works a bit differently from the other LEDs, however.
Theres no need to do advanced tricks to show the blue LED, you
can easily enable it:
echo 1 > /sys/devices/platform/leds-microp/blue/brightness
From within a terminal emulator.
the blue LED is, however, missing the 'blink' property, as the Green and Amber LEDs do.
And yes, it is also possible to turn other LEDs on at the same time, so you can make purple by enabling the BLUE and Amber LEDs.
ieftm said:
Heh, I'm sorry guys, but we already know there's a BLUE led inside.
This LED works a bit differently from the other LEDs, however.
Theres no need to do advanced tricks to show the blue LED, you
can easily enable it:
echo 1 > /sys/devices/platform/leds-microp/blue/brightness
From within a terminal emulator.
the blue LED is, however, missing the 'blink' property, as the Green and Amber LEDs do.
And yes, it is also possible to turn other LEDs on at the same time, so you can make purple by enabling the BLUE and Amber LEDs.
Click to expand...
Click to collapse
Then can we not just simply integrate that command into our applications for use of the blue LED?
Hello everyone,
Got a Bell Atrix 4G, unlocked it and I am using on Rogers network. So far, it is working well.
I am having a problem setting Notification Light. I tried the built in notification light under Settings and a few different notification light apps from market. I used to get a green light for email before but I don't get it anymore after playing with other free apps. I just can't figure this out. I put my phone on vibration mode at work so I would love to have notification lights working.
What I need is different lights for Missed calls, Email, SMS. Has anyone dealt with this issue?
Any help will be much appreciated and thank you!
I use the app light flow for that. Gives me total control over the LED. I have different colors flash for different notifications.
I use Light Flow https://market.android.com/details?id=com.rageconsulting.android.lightflow
and it handles a ton of apps and uses a TON of color combinations.
Worth the $1.
haha, i was going to start this topic today. I use blue for my Trillian notifications, Purple for yahoo mails.
will try the light app suggested above.
Thanks!
Thank you guys! Yes, "Light Flow" makes it work. Please ensure you turn on "Setting > Display > Notification LED".
Light Flow does not work correctly on the ATRIX AT ALL. I had low battery warnings going off when the battery was fully charged, no charge LED ON option, no charging LED, only discharging WTF?
So I was playing around with lightflow on my nexus 4 and I noticed that the red LED is kind of prominent when the notification light pulses when I have any color selected with red in it. There's a red glow at the top of the notification light when it pulses, which makes blue half purple, yellow half red-orange, and white pink/purple. The picture is kind of bright, but you can kind of see what I mean (it's supposed to be yellow). It's a lot more visible in real life... Does anyone else have this too?
cheeseypuffles said:
So I was playing around with lightflow on my nexus 4 and I noticed that the red LED is kind of prominent when the notification light pulses when I have any color selected with red in it. There's a red glow at the top of the notification light when it pulses, which makes blue half purple, yellow half red-orange, and white pink/purple. The picture is kind of bright, but you can kind of see what I mean (it's supposed to be yellow). It's a lot more visible in real life... Does anyone else have this too?
Click to expand...
Click to collapse
Looks yellow to me brotato.
But yes, I think it's normal to get glimpses of other colors. Happened on gnex and gs3 too.
-Sent from my Nexus 7.-
How do you even configure the LED I couldn't find a way to do this (never had a phone with notification LED before)
In fact I haven't seen the notification LED at all, I can't test SMS messages because my Micro-SIM isn't here yet, but all other kind of notifications had no effect.
Where do I find the LED settings
EDIT: Ok, It seems like there is a notification if I receive a mail (gmail), but not for all notifications. Is this normal?
(If you can tell me how it works I can check if I have a red glow)
Use light flow, download from play.
Sent from my HTC Explorer A310e using xda premium
Slightly topic related question. (apology for slight double post - question sits better here - not worth another thread)
Q1 : When charging I have no lights/led indicators illuminated (on both stock and aokp) - is this the normal? - intended behavior?
I'm used to HTC/Samsung, that tend charge at one colour (amber/red) and then display another colour when full (green). This would seem sensible to me, so that we ensure that we don't over charge the battery and over heat the phone?
Q2 : Another favour to ask: can someone please post a close up picture, of the two Nexus 4 USB cable plugs, as I've managed to confuse several USB leads and don't know which came with the Nexus, which I may need for an RMA return?
Thanks in advance
An RGB LED is basically 3 LEDs crammed into one housing. It's just like a pixel on your monitor, but larger. If you were to zoom in on your monitor you would notice the three individual colors. It just so happens that the red part of the LED doesn't diffuse throughout the housing as well as the other colors do.
karanrajpal14 said:
Use light flow, download from play.
Click to expand...
Click to collapse
I see, it's done using an app.
I can see a small red glow at the top (I guess) but it's really small and I wouldn't even have noticed without this thread. (Maybe it's because I am red-green colorblind, but I don't think this has a great effect here)
BTW: Is there a more advanced possibility to control the LED in Cyanogenmod or is it a good idea to pay for light flow (I'm especially interested in support of steam)?
ben_pyett said:
Q1 : When charging I have no lights/led indicators illuminated (on both stock and aokp) - is this the normal? - intended behavior?
I'm used to HTC/Samsung, that tend charge at one colour (amber/red) and then display another colour when full (green). This would seem sensible to me, so that we ensure that we don't over charge the battery and over heat the phone?
Click to expand...
Click to collapse
Yes, by default there is no LED notification of the charge status. You can use Light Flow (including the free version) from the Play Store to add this behavior, as well as controlling notifications for all sorts of events (not just LED notifications -- sounds and vibrations, as well).
You don't need to worry about overcharging the battery, though. There is a protection circuit built in that prevents issues of that sort.
ben_pyett said:
Slightly topic related question. (apology for slight double post - question sits better here - not worth another thread)
Q2 : Another favour to ask: can someone please post a close up picture, of the two Nexus 4 USB cable plugs, as I've managed to confuse several USB leads and don't know which came with the Nexus, which I may need for an RMA return?
Thanks in advance
Click to expand...
Click to collapse
--Here you go--
Hidden92 said:
BTW: Is there a more advanced possibility to control the LED in Cyanogenmod or is it a good idea to pay for light flow (I'm especially interested in support of steam)?
Click to expand...
Click to collapse
CM allows you to set colors and flash rate per app, Lite flow allows this too, Lite flow (paid) allows you to add additional apps beyond the standard ones (Gmail, SMS, Facebook, etc).
Brad S said:
--Here you go--
Click to expand...
Click to collapse
thanks, but I wasn't able to see any attachment? *confused*?
EDIT: I can now, XDA/browser issue, seen it now - so resolved and thanks
I'd suggest you try out the lite version of light flow first then decide to buy it or not. It's worth the price AFAIK!
Sent from my HTC Explorer A310e using xda premium
On previous phones, when I got a notification, say a text message, the screen would light up and I could tell I had to check my phone. On my N4, when I get a text the phone only vibrates and the screen doesn't light up. Is there a way to have it light up? I tried looking through all the settings but couldn't find anything, and I find it rather odd LG would set their phone up like this.
Also- is there a way so that the pulse notification light goes off more frequently? right now I have to wait about 10 seconds for the next pulse light to go off, making the notification LED rather useless if i miss it the first time.
Thanks.
unity04 said:
On previous phones, when I got a notification, say a text message, the screen would light up and I could tell I had to check my phone. On my N4, when I get a text the phone only vibrates and the screen doesn't light up. Is there a way to have it light up? I tried looking through all the settings but couldn't find anything, and I find it rather odd LG would set their phone up like this.
Also- is there a way so that the pulse notification light goes off more frequently? right now I have to wait about 10 seconds for the next pulse light to go off, making the notification LED rather useless if i miss it the first time.
Thanks.
Click to expand...
Click to collapse
There's custom ROMs such as CarbonROM, Xylon, ParanoidAndroid, or XenonHD and so many others) that let you configure the colour, blink rate, and application-specificity of your LED indicator. You can also look at Liteflow to customize your LED notification if you'd rather not go to custom ROMs
Light Flow.
Sent from my Nexus 4
On cm10.1 the screen dont goes on too
Tapalked with a Nexusâ´
steviewevie said:
Light Flow.
Sent from my Nexus 4
Click to expand...
Click to collapse
This. But if you are rooted and having a custom ROM, they integrate it by default. But if it's really waking up the device you want, you might want to try an app called SMS WakeUp. (You can get it from the Play Store)
Hey all. Just wanted to post to clear up some discrepancies that I have found concerning the presence or absence of the notification light on the 2014 version of the Moto X. There is in fact a notification light on the Moto X. However, like most users I couldn't find any setting for it or in fact see where it might be located physically on the phone itself.
To enable the notification light I am pretty sure your phone must be rooted and a custom ROM installed. As mentioned before, I had no idea that the Moto X had a notification LED until after I rooted it. When rooting and flashing was when I first saw the LED light up. When putting the device in fastboot mode (Volume down + power), a small green light showed up in the top speaker. Rather, in the slit between the front of the speaker and the body of the phone where the sound emenates from. I just assumed it was kind of a "warning" light to notify you that you were outing the phone in Fastboot mode and ignored it. Anyway, after the new ROM was installed and my notifications started rolling in, the light started lighting up. So far it has lit up for each text and also for my snapchats.
As for why the light was included by Motorola, but was still disabled, I can only guess. I assume that because of the Moto Display feature being included the developers assumed it would be redundant. Indeed, if I had a choice between Moto Display or a notification light, I would probably choose the display, but that just my two cents.
So, if you have rooted and flashed, have you noticed the notification light? Or is this just enabled by Motorola with the android 5.x update? Thoughts?
cvwalker65 said:
Hey all. Just wanted to post to clear up some discrepancies that I have found concerning the presence or absence of the notification light on the 2014 version of the Moto X. There is in fact a notification light on the Moto X. However, like most users I couldn't find any setting for it or in fact see where it might be located physically on the phone itself.
To enable the notification light I am pretty sure your phone must be rooted and a custom ROM installed. As mentioned before, I had no idea that the Moto X had a notification LED until after I rooted it. When rooting and flashing was when I first saw the LED light up. When putting the device in fastboot mode (Volume down + power), a small green light showed up in the top speaker. Rather, in the slit between the front of the speaker and the body of the phone where the sound emenates from. I just assumed it was kind of a "warning" light to notify you that you were outing the phone in Fastboot mode and ignored it. Anyway, after the new ROM was installed and my notifications started rolling in, the light started lighting up. So far it has lit up for each text and also for my snapchats.
As for why the light was included by Motorola, but was still disabled, I can only guess. I assume that because of the Moto Display feature being included the developers assumed it would be redundant. Indeed, if I had a choice between Moto Display or a notification light, I would probably choose the display, but that just my two cents.
So, if you have rooted and flashed, have you noticed the notification light? Or is this just enabled by Motorola with the android 5.x update? Thoughts?
Click to expand...
Click to collapse
It's not disabled, it's just not a notification light. On the stock rom it's used to indicate that the phone is charging or low on battery if the phone is not turned on. Custom roms override that feature and use it as a notification light instead.
I'll take your word for it. However, I never saw an option for it on the settings, and it never once lit up while I was charging, on or off.
Thanks for the input and explanation!
cvwalker65 said:
I'll take your word for it. However, I never saw an option for it on the settings, and it never once lit up while I was charging, on or off.
Thanks for the input and explanation!
Click to expand...
Click to collapse
I think it only comes on if the battery is so low that the phone can't turn on yet to indicate that it's getting power.
I saw mine blink one time. It was when I was rebooting. I saw a Red light flash real quick. Really wish I was rooted so I could enable it.
No need to have a custom rom. If you are rooted you can simply enable it using Tasker. I use it for certain profiles.
TokedUp said:
I saw mine blink one time. It was when I was rebooting. I saw a Red light flash real quick. Really wish I was rooted so I could enable it.
Click to expand...
Click to collapse
You saw one of the IR sensor lighting up. the only led on the X 2014 is a green one.
No. It was the light. But I'll argue with u more about it since I'm bored.
There are MANY YouTube reviews that mention the IR sensors and the "light flash"..
Sent by my Motorola Droid XYBoard MZ617-32 10.1_ICS 4.04
i'm on stock 5.0 rooted and light flow app. led notification works well
Please share tour settings.
My config. 20 in intensity is plenty sufficient
as in the "other post" i share here my config
Bad news (for me) after lightflow update (playstore 17 February) no more led notification. Can't make led work
So baaaaaad
Iv been using Tasker and the "notification listener" plugin.
Iv just set up profiles to switch a variable on and off based on notification posted/cleared.
Then a task that runs an LED flashing loop based on that variables value.
In tasker, the LED is called "charging led" not a notification led.
michyall said:
Bad news (for me) after lightflow update (playstore 17 February) no more led notification. Can't make led work
So baaaaaad
Click to expand...
Click to collapse
That happened to me on the version before this update, it was driving me crazy. LED just stopped working, tried everything to fix but it wouldn't work. Then this morning it was working and then I saw the update so I backed up the app with titanium and updated. So far, knock on wood, been working all day.
I solved unonstalling LF and re-installing from playstore. Works again. +1
michyall said:
I solved unonstalling LF and re-installing from playstore. Works again. +1
Click to expand...
Click to collapse
I am having this issue, again, so frustrating. A reboot fixed it for a short period but the led stopped working again. I haven't tried uninstalling and redownloading but that is my next step.
I would really like to know what is causing this, the app or something with the stock rom.
Don't know why. Now i'm on cm nightlies, no need LF, led's working good
Is possible to create some kind of "patch" to use the notification LED on Stock ? I mean to use it as a native LED, like on CM builds, basically port this function from CM and implement it on Stock?