hey guys,
i have the wiredest problem.
i've phurched a new galaxy s5 and when i connect it to the charger, a charging icon appears but the battery % dosent go up, only down.
i've downloaded many battery analysing app and theey all seem to think that everything is fine, that the current flows and all, but the % dosent go up!
i switched a battery and a cable and its definitly a phone problem (i can charge the battery in another phone)
some suggested that i sould replace the charging port but it looks completly new and fine, and also cost quite a lot of money to replace.
is there any other soultion?
thanks!!
Sorry I encountered the same problem on my old s3. I finnaly solved the probleme by changing the micro hdmi port. Sorry I know you won't here this but i search everything. I replace myself it's not so hard. I do it because my s3 was in ending life.
It does sound like the charger port.....
The replacement parts aren't that expensive (under £10 off eBay).
Just make sure you get the right one....
Look at the pictures......
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These parts are device variant specific......
It would probably be a good idea to match 'rev' versions too.....that was certainly the case with the S2....If the wrong rev version board was put in, it led to signal problems etc......
http://i.imgur.com/rVnFwJM.jpg
Related
Hi guys. Need help here. My ipaq won't charge even with te original usb cable.
It seems that the usb port is damaged - it charges only when i put a piece of paper in the mini usb connector so the pins of the connector are pressed against the ones on the usb port on the device. I guess they use too soft pins and they got deformed. Can anyone help me fix that. My device has no warranty.
I don't know if it is easy to change but this is what you have to buy :
http://www.repairhppda.com/product_info.php?pName=connector-for-synccharging-problems-for-610-612-614&cName=select-your-ipaq-model-ipaq-600-series
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yep. That's the part. I found it later after I wrote the post. I guess I'll have to make a paypal account after all. Thank you thouugh. In the local service center they said they will fix it fo 15USD but I have to provide the spare part.
Any idea why this part has broken down? Is it possible to fix it without repacing it?
it sounds like either the small clip inside the USB port has snaped, or bent.
If its snapped, then theres very little holding it on so best to get it replaced
If its bent, then it may be possible for you to bend it the other way so it makes a stronger contact tot he USB plug. It will still be weaker than originally.
I have the exact same problem. The weird thing is that it still syncs and I can use WM5torage. I got around it by buying a cheap extra battery + external battery charger combo.
A'ight, so i opened my good old' Prophet today.
I am 50% sure that the battery thing thangy on the motherboard (see pic) is broken.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
However, it might also be the battery, i have two batteries, one is the one that came with the Prophet and one is a cheap battery i ordered from Dealextreme.
I do know that the cheap battery is dead, but the other one (I did some testing with it, it shows up at 1.4V at my multimeter) i'm not sure if it is dead.
The phone has been like this before:
It randomly worked, randomly turned off, it wouldn't work for like 10 days, then when i put the battery in again it worked.
It kept doing that until it died completely.
Any suggestions?
I can't understand on photo. A battery pin is broken? If the problem is broken pin, a watchseller or jeweler can fix it. They have the right equipment to work with small things
zephyri-xr said:
I can't understand on photo. A battery pin is broken? If the problem is broken pin, a watchseller or jeweler can fix it. They have the right equipment to work with small things
Click to expand...
Click to collapse
You think they will fix this?
I would try to get a new (third) cheap battery.
Or try to re-animate the cheap one (dangerous, forbidden, but works often for me: open battery casing, unsolder LiIon-Cell, reload with Lab power supply to around 3-3.8 V (never > 4.2V!!!!), resolder, put in Prophete, start charging....)
The pins look ok. 1.4V for LiIon is below the deadly shutdown value!
TS
OK, maybe my answer is a bit late...
So my power connector has a problem. I can't get it to reliably connect. Just a little jostling causes it to loose connection. If this happens while I sleep, the power drains completely and my alarm doesn't go off.
Any idea how to fix this?
I'm pretty sure the issue is not with my wires because I've tried several - and tried the wires on several devices and they work fine.
synpax said:
So my power connector has a problem. I can't get it to reliably connect. Just a little jostling causes it to loose connection. If this happens while I sleep, the power drains completely and my alarm doesn't go off.
Any idea how to fix this?
I'm pretty sure the issue is not with my wires because I've tried several - and tried the wires on several devices and they work fine.
Click to expand...
Click to collapse
It's the piece of (excuse my French)..........sh*t USB port on the phone. Mine has come loose too. Just got my warranty replacement and it freezes and the colors are off (like the whites are actually a light yellow.....wasn't like that on my old phone)
very true, you can attempt to clean out the usb port on your phone in hopes this will fix your issue. otherwise get ready to spend $5-10 on ebay and pick up a new port, of course you will have to solder this in so yeah, its a fun job
Mine has been this way since the day I got it. I actually just bought some Samsung micro-USB cables off Amazon that have a solid fit inside the phone, wonderful cables! Can't beat the price of them either.
http://www.amazon.com/dp/B001XXUOQI/ref=pe_175190_21431760_cs_sce_3p_dp_1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So, I had to change my original Xiaomi Redmi 4 Prime charger 'cause I lost it, and I went for AUKEY quick charger -> https://www.amazon.it/AUKEY-Caricabatterie-Caricatore-Samsung-iPhone/dp/B01AHYR04M, tempted by the possibility of charging my phone in less than the usual 2 hours.
However, I'm realizing now I probably did a bad move, since I'm reading many posts about how using a quick charger can reduce your battery life on the long run, some state they've used quick charge from the beginning (I mean right after they bought their phone) and they had to change battery or phone after one year and half more or less, not even able to reach more than 2 years, whereas some other claim they've always used a normal charger and their battery is as still good as the "old" times.
I'm thinking about sending the charger back and take a normal one, what's your opinion about it? Should I go for a charger with 2.0A in output?
R4P doesn't have Quick Charge compatibility in any case. It'd probably overheat like crazy even if it did.
Sure it has...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
... see that circle around the thunderbolt icon? That means fast charging, when I charge the phone with a non quick charger, it only appears the thunderbolt. And it's also stated in the block screen, "Fast charging".
Guys, my Galaxy S8 is not charging, this message is displayed "Charging Device connected via USB", I can only charge by restarting it.
PLEASE HELP ME!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FbRBR said:
Guys, my Galaxy S8 is not charging, this message is displayed "Charging Device connected via USB", I can only charge by restarting it.
PLEASE HELP ME!!
Click to expand...
Click to collapse
Check the port for dirt or lint. Use a sewing needle to clean it. It should be nearly silver inside, at the bottom. These ports are noted to pick up daily trash get packed in. Back in your hot sweaty pocket. And packed again. Seems to be a good cheap place to start and a noted fix for a lot of people across a lot of type c devices.
TheMadScientist said:
Check the port for dirt or lint. Use a sewing needle to clean it. It should be nearly silver inside, at the bottom. These ports are noted to pick up daily trash get packed in. Back in your hot sweaty pocket. And packed again. Seems to be a good cheap place to start and a noted fix for a lot of people across a lot of type c devices.
Click to expand...
Click to collapse
I already changed the charge connector twice, already changed the firmware nothing solves this problem.