Related
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Hi,
same method as old models :
Check phone version / exact sub-model, here are three hardware versions of Y300:
1.Huawei Y300 (T8833) - TD-SCDMA / China Mobile
2.Huawei Y300-0000 (U8833) - WCDMA China Unicom
3.Huawei Y300-0100 (U8833) - WCDMA International
check version (product ID) with this code : *#*#1357946#*#* , dial button (green)
there is international version ROM - Y300-0100 at Huawei site, you probably downloaded it ...
- put "dload" folder from archive on formatted micro-sd card's ROOT
- put micro-sd card into phone
- start phone in download mode = Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode
(taken from upgrade manual - which is found in archive, pdf ... )
- wait for finish ...
p.s. if not accepting firmware - means it's not international version ....
b.r.
Alex
If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.
what is the latest firmware update for Huawei y300
what is the latest firmware update for Huawei y300? i have the software versio V100R001C151B165 is this the latest update?
please update
i backed up my imei but deleted the folder i try to backup again and it says its already backed up ??
How to restore Imei
I didn't understood woht ot restore my imei. Could you explain it completely?
HUAWEII Y300-0000 question
Hi,
I have HUAWEII Y300-0000 phone I've bought in china.
Managed to unlock it thanks to your manual.
It comes with ROM: Y300-0000V100R00C17B180 (Android 4.1.1).
The only problem I have is that sometimes when I try to dial I do not manage to establish call (the call is tried to be established and then disconnects). When this happens there is also problem in incoming calls. I manage to receive the incoming call but when answered the connection drops after several seconds.
My question is whether this is an issue you are familiar with.
If so, do you have any suggestions?
Are there any new ROMs for this version that maybe handle these kind of issues.
How can I install new ROM on already rooted phone?
Thanks in advance
tamirgz said:
Hi,
I have HUAWEII Y300-0000 phone I've bought in china....
Click to expand...
Click to collapse
Have the same problem - could I instal there soft for Y300-0100 after unlock bootloader?
Can you tell me how do I "zero" the Y300 IMEI? I have one that was left without system and now I can't flash the
HUAWEI_Y300_firmware(Y300-0100,Android 4.1,Emotion_UI,V100R001C00B175,Normal,05011FKA)
Now I can't revive my Huawei?
Thanks
OmenHTX said:
If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.
Click to expand...
Click to collapse
I tried the official one but the performance is very low:crying::crying::crying::crying:
Ram Expander on Huawei Asend Y300
I rooted my phone it works properly. Everything working fine. I just have have one problem that how to expand its ram. Plz tell me.
I tried with 2gb class 6 card with swalpt expander but it show nothing in it.
Huawei Y300 Ram Expander
Plz tell me how to expand ram of Huawei Ascend Y300.
babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
hi there, i believe you can only flash the official firmware upgrades from a official ROM because when you check for upgrades to the firmware it gives you a option to install from local storage which i have yet to see in a custom ROM. in future i would always recommend a backup before installing any other ROM
hey someone flashed the official rom successfully?
zeroing imei
can you write how to zero imei code
flashing huawei y300. if you can upload any ctock or custom ro who i can install in
mobilexpert said:
Hi,
same method as old models :
Check phone version / exact sub-model, here are three hardware versions of Y300:
1.Huawei Y300 (T8833) - TD-SCDMA / China Mobile
2.Huawei Y300-0000 (U8833) - WCDMA China Unicom
3.Huawei Y300-0100 (U8833) - WCDMA International
check version (product ID) with this code : *#*#1357946#*#* , dial button (green)
there is international version ROM - Y300-0100 at Huawei site, you probably downloaded it ...
- put "dload" folder from archive on formatted micro-sd card's ROOT
- put micro-sd card into phone
- start phone in download mode = Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode
(taken from upgrade manual - which is found in archive, pdf ... )
- wait for finish ...
p.s. if not accepting firmware - means it's not international version ....
b.r.
Alex
Click to expand...
Click to collapse
if you can upload any custom or stock rom who i can install in stock recowery for huawei y300(recowery name is .android system recowery<3e>
huawei y300 flashing
OmenHTX said:
If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.
Click to expand...
Click to collapse
how to get or hack bootloader code if my phone is bricked.
or
if you can upload any custom or stock rom to install in stock recowery(i can go to recowery and i can force upgrade but fails at step 2/2).
recowery name is ''android system recowery <3e>''.
or if i can instal any custom recowery now i install rom trought this custom recowery.
WRITE ANY OPTION TO WAKE UP MY PHONE.
falshing huawei y 300
babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
i install chainfire 3d and when i instaling driver my phone is shut down and i can wake up him from that it only show huawei ascend logo i can go to stock recowery and i can force upgrade but fail at ste 2 can you fix it
Unlockin Huawei Y300
babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=BBliIomdLOI
You can unllock bootloader like this see on video
Sigma-key app
Ateeq Rana said:
Plz tell me how to expand ram of Huawei Ascend Y300.
Click to expand...
Click to collapse
Search playstore I forget the excat name of the app. I used swapit(the name has changed now I forget the name) this uses your sd card as ram but do take note that the more u use your sd card the quicker it can go bad.
hi, i have zte axon 7 chinese version
i follow this tutorial https://forum.xda-developers.com/axon-7/development/rom-guide-updates-to-stock-files-via-t3469484
and by mistake i i nstall the A2017UV1.1.0B19_bootstack_by_DrakenFX.zip the U version instaed of the chinese
now i get this menu (belew) and i cant get to twrp , how can i fix this
please please help me
Flash TWRP, flash proper bootstack.
can i install the 2017 Chinese bootstack and install the A2017UV1.1.0B19_StockSystem_by_DrakenFX.zip
i want the international rom version and not the chinese that missing google apps
i read that i need universal bootloader , where i get it to my chinese version
tal221 said:
hi, i have zte axon 7 chinese version
i follow this tutorial https://forum.xda-developers.com/axon-7/development/rom-guide-updates-to-stock-files-via-t3469484
and by mistake i i nstall the A2017UV1.1.0B19_bootstack_by_DrakenFX.zip the U version instaed of the chinese
now i get this menu (belew) and i cant get to twrp , how can i fix this
please please help me
Click to expand...
Click to collapse
Same, something's wrong with A2017UV1.1.0B19_bootstack_by_DrakenFX.zip on chinese version. Try flash other firmware again.
can you send me link to another framware that work with the chinese model?
Hi all,
Recently, I go through this forum and found there are many custom roms ready for this Le Pro3 phone. After consider the hardware specification and cost, finally I procured Le Pro3 (x720) phone.
However, when I received this phone, I found the latest EUI already installed (EUI 5.9.026s). When I go through the instructions provided by XDA forum, I found there almost no way to unlock the bootloader of this phone if this came with EUI 5.9.026s.
Can someone tell me if there is a way to unlock this bootloader if this phone is came with EUI 5.9.026s? If not, can I still can refresh my phone with some custom roms (like Omni rom on lineage OS?)
Thanks
I have no trouble with my x720, first time flashed customs on 20s, but few days ago returned from stock 26s to custom. Can't you unlock your phone?
No luck on unlock.
I believe you already installed TWRP before upgrade to 26s, so you can falsh back to previous version.
Have you official ROM and followed the unlock guide?
I follow the unlock Guide but no luck. I go through few discussion in XDA forum, seems some major changes in OS permission settings on 26s rom
Maybe flash 23s, wipe then try?
I cannot try it, but maybe it's possible to fool the update system. By modifying the update script of a 23s OTA file you can bypass the check for rom and modem version, then the system will execute a "downgrade" from 26s to 23s. This theorically, I can't try if it really works but the right path can be this! Cheers!
Sent from my LEX720 using XDA Labs
I did downgrades from 20s to 18s and from 23s to 20s... Seems buggy, but after wipes worked perfectly.
@marik1
How did you do the downgrade? Is the way you downgraded possible with a locked bootloader? Thank you.
(I am considering buying a Le Pro 3, but I will probably wait until I know that unlocking the bootloader is possible with the new EUI installed.)
For me it's simply flashing file with ROM called "update.zip" and placed into main folder trough LeEco's recovery. Like making update, but with different file.
I tested qfil by following the thread here to flash the previous rom but no luck, when I use qfil, I am quite sure the phone is connected ( I can see the com port), the process started(rom are unzipping), but when the system try to write on the disk, the process failed. I wonder if there are any permission/encryption settings applied on the partition of 26s rom, and not sure if I can downgrade due to partition permission.
BTW, where can I download 23s rom? and how to modify the script to prevent version check? thanks
marik1 said:
For me it's simply flashing file with ROM called "update.zip" and placed into main folder trough LeEco's recovery. Like making update, but with different file.
Click to expand...
Click to collapse
Where to download this file? and the file should place on main folder but not root folder, right?
Just flash it, without changing version checking. You can take it from LeEco website;
https://bbs.le.com/zt/eui/le_pro3.html
You can also have trouble with connect, so you have to remove :110 from link and you gain;
http://107.155.49.13/222/8/95/scmau...e=0&vrtmcd=109&buss=60001&cips=159.205.89.106
Developer options，unlock OEM
Can someone confirm that unlock works for new devices which are shipped with the new software version? @andylcm please let us know if you get it working. thanks
nomailing said:
Can someone confirm that unlock works for new devices which are shipped with the new software version? @andylcm please let us know if you get it working. thanks
Click to expand...
Click to collapse
the problems have been fixed.
Actually, I follow the unlock guide here, the problems was on this bootloader unlock guide but not on the phone itself.
@andylcm
Could you please explain what you did differently from the guide?
Is this the guide you are referring to? https://forum.xda-developers.com/le-pro3/how-to/leeco-le-pro-3-root-t3476560
I know that device info command shold be device-info
Hi
I bought an M3 Wifi US version BTV-W09C128, which was recently upgraded via OTA to Nougat B353.
I used the rollback files on a European Huawei site
https://consumer.huawei.com/it/support/tablets/mediapad-m3-8/
to downgrade to Marshmallow BTV-W09C100B006 to regain 5 GHz Wifi, and then found it was not possible to upgrade to Nougat.
I opened the calculator in landscape mode and enter () () 2,846,579 () () =
finding
Vendor Country Info (same as oeminfo?) shows
Vendor: hw
Country: usa
This seems like the reason why my M3 cannot do OTA updates now.
Does anyone know if there are files available on a Huawei or other site to enable me to revert the M3 to US C128?
Thanks in advance!
Hello Sam,
I did the same updates on same type of device. You can try firmware finder to download the update files. I was not able to use this, I am trying for 2 days to get back to Nougat, tried chinese, european and US versions from US. I also had some hard times getting back to android 6, after different firmware updates I got stuck on NRD90M test-keys firmware. Now I am back to android 6 using the rollback and firmware from huawey italian site but I'm not sure why it worked on 10+ try...
If you find a way please let all of us know the flow
Thank you,
Mircea
I did the same thing. I don't think there is a full stock rom for C128 out there that you can flash it back. I have done lots of search on the internet already. However, I like to have 5Ghz enabled and I don't like EMUI 5.
Hello,
I just got a Redmi Note 7 Chinese variant but I live in India and the Chinese MIUI isn't that great. I want to change it to the global ROM. I have the fastboot ROM downloaded and even the recovery ROM. I'm hoping that someone has already addressed the issue but I'm posting this because I'm not able to find any. My phone is currently running MIUI China 10.2.13 and it has received the 10.3.4 update. I haven't updated it since it might increment the arb index. Can anyone give me a confirmed, safe and working method to change my software from China to Global? I understand the risks of bootloader unlocking and all.