Hello everyone .. I write because I have a problem with the proximity sensor of my meizu MX4 . I flashed the CM 12.1 and now when I call someone , the screen turns off immediately and to turn it back I have to turn off the phone . I tried with Proximity Fix , but sometimes it works and sometimes it does not . I also downloaded Sensor box and when I go to " Proximity sensor" is shown 0.0 cm , like I was stuck on the phone . I can calibrate the sensor in some way ? I have the cm - 12.1-20151015 - UNOFFICIAL - MX4 even before I had the 028 ... I tried to flash a CM oldest in the hope of solving . Thanks in advance for your response .
You should also try the latest build on this cloud storage account:
https://yadi.sk/d/0FYPeIdSjuR3V
Related
Hi
Yesterday i flashed the Xylon(stable version) rom and francos kernel,also gapps.
When i try to take a photo with a flash the flash is not working,its working just if i tap the screen and then the photo take button.i also tried to turn the torch on and then start the camera but the camera app wont start with a torch on.i wonder if it could be a rom or a kernel bug?
I recently upgraded my phones firmware from 4.3 to 4.4 everything was working fine until a few days later the camera suddenly stops working. It just shows black but all the buttons on the camera app is there. When I switch it to the front cam its working but on the rear its not.
I tried to test it using *#0*# it shows data line failed and camera failed. I tried flashing it again and doing a factory reset but nothing works. I tried replacing the camera module but still not working. Does this mean my board is broken or something?
Need Help. thanks!
stryker05 said:
I recently upgraded my phones firmware from 4.3 to 4.4 everything was working fine until a few days later the camera suddenly stops working. It just shows black but all the buttons on the camera app is there. When I switch it to the front cam its working but on the rear its not.
I tried to test it using *#0*# it shows data line failed and camera failed. I tried flashing it again and doing a factory reset but nothing works. I tried replacing the camera module but still not working. Does this mean my board is broken or something?
Need Help. thanks!
Click to expand...
Click to collapse
I've got the same problem on the same phone. My phone wouldn't power on and had to have it's ic replaced. After that the wifi wasn't working so I flashed to 4.4 and that fixed that but the camera isn't working. When I test *#0*# the front facing camera is working but the rear show the same errors as above. When I open the camera it shows a black screen and says 'firmware is updating please wait' and nothing happens.
On typing *#34971539# and then pressing Phone/CAM FW Ver Check I get these:
Rear facing camera
Cam FW Ver: NONE
Phone FW Ver: S13F0SAGI01
The front facing camera has
Cam FW Ver: S5K6B2YX
Phone FW Ver: S5K6B2YX
Any help would be appreciated!
Did you guys get any solution for this issue? I'm having the same problem with my I9505 ... help is appreciated from any body
Well i guess i joined you with the same issue.
I'm going through the same problem now
exactly the same problem
Dear friends I own a Samsung SM-N9005 Note 3. My problem is that the auto rotation don't work it is ticked and I removed the sim card and battery and left it for an hour. When I enter *#0#* the phone remain the same everything don't move. When I press sensors it doesn't turn green and when I choose light or something else it comes up FAILED. I took off my proximity sensors out cleaned it well and not successful. My phone it's not rooted. Can you please give me an advice? Thanks in advance Colin.
Factory reset .
I did a factory reset but unsuccessful.
Hi i have a problem with my note 4 N910F
I had resurrection remix 5.6.9 rom it work for 1 year really good and stable then my phone turn off because of the battery 1% then i put it to charge when i turn it back on BOOM BLACKSCREEN !!!! i try everything evey method none of them work i try the 1 2 3 min and nothing works i try installing other roms and i still get blackscreen i try 5.1.1 , 6.0 , 7.1 nothing works so i try stock rom 5.0.1 , 5.1 , 6.0 and i only get samsung logo then blue led works and sound but still getting blackscreen?
????????
MoDzTunes said:
Hi i have a problem with my note 4 N910F
I had resurrection remix 5.6.9 rom it work for 1 year really good and stable then my phone turn off because of the battery 1% then i put it to charge when i turn it back on BOOM BLACKSCREEN !!!! i try everything evey method none of them work i try the 1 2 3 min and nothing works i try installing other roms and i still get blackscreen i try 5.1.1 , 6.0 , 7.1 nothing works so i try stock rom 5.0.1 , 5.1 , 6.0 and i only get samsung logo then blue led works and sound but still getting blackscreen soo i install stock rom 4.4.4 kitkat and now display working no blackscreen anymore but now it lags on the left side of my touchscreen can someone please help me and tell me how can i fix this thank you
Click to expand...
Click to collapse
Try this
Dial *#2663# and press on "TSP FW update" wait until it finish update then reboot into download mode flash stock firmware in odin but go in odin options and check on "nand eraseall" then hit start.
Once odin finish flash go to stock recovery and make factory reset then reboot.
Hopefully this will fix otherwise it could be hardware display itself need to replace.
Not working
Hi guys,
I have a strange issue with my phone. After the upgrade to 7.0 my fingerprint sensor has stopped working. When i try try to access it it says that an error has occured and prompts me to restart my device. The weird thing about it is that it is very warm to the touch every time my screen is on. After a reset to factory settings i see that the sensor is getting warm after the security initialisation on the first setup. I have two guesses:
- it is a hardware issue
- the sensor is constantly being used by some background service and gets into error.
I tried to downgrade to 6.0.1 but odin keeps crashing at cache.img .
Any ideeas on what to do ?
Thanks !
Probably a hardware issue mate, I'd get it checked out