I tried the Samsung Galaxy Note 4 quick charger on my ZE550KL 2GB ram model. The starting battery percent was 18% and after about half an hour the battery was still at 42%. I read on Qualcomm's website that SD410 supports quick charging 2.0. But the results speak otherwise. Could it be the software restricting quick charge?
Gustapo said:
I tried the Samsung Galaxy Note 4 quick charger on my ZE550KL 2GB ram model. The starting battery percent was 18% and after about half an hour the battery was still at 42%. I read on Qualcomm's website that SD410 supports quick charging 2.0. But the results speak otherwise. Could it be the software restricting quick charge?
Click to expand...
Click to collapse
I thought that only the SD 615 version of the ZE550KL was quick charge compatible.
The 410 is also quick charge compliant as well. Check this
Gustapo said:
The 410 is also quick charge compliant as well. Check this
Click to expand...
Click to collapse
The processor supports quick charge, but as far as I know, it's not implemented in the phone.
Yes I tried it too recently and the best rate at which phone charging was 1.1A (I used 2.1A charger, it took 3 hrs to charge from 10% to 100%)
Either we should all ask ASUS to enable fast charging in coming updates or wait for someone to build custom kernel that supports fast charging.
if it's any consolation, the moto g3 also doesn't supports quick charging. It also has SD 410. 3 hours is the time is takes for me to charge it to full with the provided OEM charger as well.
Gustapo said:
if it's any consolation, the moto g3 also doesn't supports quick charging. It also has SD 410. 3 hours is the time is takes for me to charge it to full with the provided OEM charger as well.
Click to expand...
Click to collapse
I had Moto G 2015 for couple of weeks. Didn't really use wall charger enough, I used USB charging through PC most of the times so can't really say about charging time.
I found some references online they claimed Moto g3 does charge faster, here is one...
http://forum.xda-developers.com/2015-moto-g/help/charge-time-t3171725
As far as the laser is concerned, has anyone raised this issue with them on forums?
can't bear slow charging :crying:
It more than likely has to do with the USB configuration so I doubt any software update will enable that, but to be fair it could be a software based limitation. The USB component needs to allow for the high throughput though.
I personally don't feel too negative about the charge time because I came from an iPhone 5S that doesn't have quickcharging. I am sure for others it is like watching paint dry though.
What I find most disturbing about the phone is that, it came with a 1A charger. You can save some significant charging time if yo use a standard 2A charger.
suhridkhan said:
What I find most disturbing about the phone is that, it came with a 1A charger. You can save some significant charging time if yo use a standard 2A charger.
Click to expand...
Click to collapse
Have you tested this? Devices will only pull what they are able from a charger so if it was designed to drawl up to 1.35A then even with a 2A charger it will only drawl 1.35A.
dexter20082001 said:
Have you tested this? Devices will only pull what they are able from a charger so if it was designed to drawl up to 1.35A then even with a 2A charger it will only drawl 1.35A.
Click to expand...
Click to collapse
I think you are right on this. I just tested and even with a 2A charger it takes more than 3 hours to charge the phone.
Anyone tried using qualcomm 2.0 certified quick chargers?
From this zentalk link, looks like my suspicion was correct. Event though SD 410 supports quickcharge, Asus limited the circuits etc. to not take 2A. Sad!
At least it charges faster on super saving mode.
35% in 60 mins on Normal mode
41% in 60 mins on super saving mode
suhridkhan said:
What I find most disturbing about the phone is that, it came with a 1A charger. You can save some significant charging time if yo use a standard 2A charger.
Click to expand...
Click to collapse
My ZE601KL comes with a 2A charger in the box. I would say it charges quick when battery is real low and slows down when it close to 80% to complete the rest of the charging cycle.
hkwildboy said:
My ZE601KL comes with a 2A charger in the box. I would say it charges quick when battery is real low and slows down when it close to 80% to complete the rest of the charging cycle.
Click to expand...
Click to collapse
Quick charge is supposed to charge from 0 to 60% in 30 minutes then slow to normal speed.
heywheelie said:
I thought that only the SD 615 version of the ZE550KL was quick charge compatible.
Click to expand...
Click to collapse
You sure 615 version support quick charge?
i can use qc2.0 on ZE550KL(Z00LD) Snapdragon 615 so enjoy
BulldozerAMD said:
i can use qc2.0 on ZE550KL(Z00LD) Snapdragon 615 so enjoy
Click to expand...
Click to collapse
Are you sure that quick charge works?
What kernel are you using?
Related
Hey all, haven't been able to find an answer for this. So I'll open a new thread. Now the question. The phone seems to take a long time to charge. Is it possible for me to use my Note 4's quick charger or can anyone recomend a faster charger for this phone? Charging it with Note 4's 2a charger wont damage the battery? Thank you.
I use a 2.1 out and it charges in about an hour and a half
Charging isn't fast and it seems that if the phone gets warm, it draws less power then too - so on a warm day, it can feel like it's taking years.
Would have been nice to have had wireless charging support and/or turbo charging, but alas not.
jonmorris said:
Charging isn't fast and it seems that if the phone gets warm, it draws less power then too - so on a warm day, it can feel like it's taking years.
Would have been nice to have had wireless charging support and/or turbo charging, but alas not.
Click to expand...
Click to collapse
Doesn't the phone support quick charging? But Huawei haven't bundled the appropriate charger?
Doesn't appear to. I've got a Qualcomm Quick Charge 2.0 adapter and it doesn't seem any faster, nor say fast charging.
There's a quirk, when the battery shows 100% it actually still keep charging for another 30 minutes. All tests showed that it took 3hours+ to fully charge it. So quick charge my ass.
So just to update, I have tried charging it with note 4's fast charger and it charges the phone from 20 to 100% in about an hour and a half. Which imo isn't that bad. With the included charger, it took me around 2 and a half hours... Huawei really should have included a charger with higher amp, 1 is way to low.
Winston1989 said:
So just to update, I have tried charging it with note 4's fast charger and it charges the phone from 20 to 100% in about an hour and a half. Which imo isn't that bad. With the included charger, it took me around 2 and a half hours... Huawei really should have included a charger with higher amp, 1 is way to low.
Click to expand...
Click to collapse
It's sadly very common for phones to ship with poor chargers (1A and even lower), but then again - some phones these days come with NO charging adapter, assuming you'll have a ton of them anyway.
I use a 2.1A 5V charger, but I've tried the faster ones (that can output 9V) and it doesn't speed things up, so while it can charge faster with a better PSU, it won't ever charge as quick as many other flagships. Mind you, has the G4 been given full support yet? Likewise, the Z3 is down as supporting Quick Charge 2.0 on Qualcomm's website, but then turns out to be only some variants. Makes me wonder if the Z3+ supports it in every guise.
Not sure what the reasoning is for devices that could support faster charging not actually allowing it, especially if the manufacturer could profit from selling faster chargers separately.
jonmorris said:
It's sadly very common for phones to ship with poor chargers (1A and even lower), but then again - some phones these days come with NO charging adapter, assuming you'll have a ton of them anyway.
I use a 2.1A 5V charger, but I've tried the faster ones (that can output 9V) and it doesn't speed things up, so while it can charge faster with a better PSU, it won't ever charge as quick as many other flagships. Mind you, has the G4 been given full support yet? Likewise, the Z3 is down as supporting Quick Charge 2.0 on Qualcomm's website, but then turns out to be only some variants. Makes me wonder if the Z3+ supports it in every guise.
Not sure what the reasoning is for devices that could support faster charging not actually allowing it, especially if the manufacturer could profit from selling faster chargers separately.
Click to expand...
Click to collapse
I read an article about Huawei declining fast-charge for "battery-purposes" so it can have a longer life cycle. But i think Huawei made an exception about the Huawei Honor 7.
I had an Samsung before and never had problems with fast-charging whatsoever.
My P8 was full in about 2 hours with an 2.1 A charger, while my Samsung Galaxy Mega 6.3 took 1,5 hours.
the screenshoot took from Huawei P8 & P8 Max Launching Event 2015 said that p8 has quick charge at min 21.30 but they didnt talk about that in the event
https://www.youtube.com/watch?v=9uLe3q4wHjE
Here's a quick charger for the Huawei P8 : http://www.amazon.com/Adaptive-Charger-Charging-voltages-charging/dp/9713256832
I did not buy it, but it says it charges at 9V 2.1A
IkeaKast said:
Here's a quick charger for the Huawei P8 : http://www.amazon.com/Adaptive-Charger-Charging-voltages-charging/dp/9713256832
I did not buy it, but it says it charges at 9V 2.1A
Click to expand...
Click to collapse
I think this adaptor isn't safe to p8max.. I will try another charger but only 5v with higher amp that will be safe for sure
Now i charge with stock from 3%to100% in about 2.5 h and the phone didn't tell me to remove charger for more half ahour!!
Sent from my HUAWEI P8max using XDA Free mobile app
sehooo said:
I think this adaptor isn't safe to p8max.. I will try another charger but only 5v with higher amp that will be safe for sure
Now i charge with stock from 3%to100% in about 2.5 h and the phone didn't tell me to remove charger for more half ahour!!
Sent from my HUAWEI P8max using XDA Free mobile app
Click to expand...
Click to collapse
I dont know, its 9V 2.1A, so it is quick charge. But i dont know if it is for MAX. I can charge fast. maybe 1.5h/2h?
Hi, I bought Z3+ two days ago. Fast Charger is taking around 2 hours 15 mins to full charge the phone in switch on mode. Is it the actual time to charge it with Fast Charger?
If I connected it to PC USB Cable, the charging time is very slow. Is there is any tips improve it?
Thanks in advance
What fast charger are you using? 2:15 sounds reasonable to me though I never really stopped time on a quick charge 2.0. PC usb Ports output 500 mA, which is far less than even the stock sony charger outputs, so no there is no way to speed that up.
[email protected] said:
Hi, I bought Z3+ two days ago. Fast Charger is taking around 2 hours 15 mins to full charge the phone in switch on mode. Is it the actual time to charge it with Fast Charger?
If I connected it to PC USB Cable, the charging time is very slow. Is there is any tips improve it?
Thanks in advance
Click to expand...
Click to collapse
I use quick charger to charge my Z3+ almost every day.. The charging rate is around up 1% per minute.. Usually I turn off the phone while doing so because using quick charger makes the phone quiet hot compared to when using normal charger, and that makes the charging rate just a bit more faster..
zabi1994 said:
I use quick charger to charge my Z3+ almost every day.. The charging rate is around up 1% per minute.. Usually I turn off the phone while doing so because using quick charger makes the phone quiet hot compared to when using normal charger, and that makes the charging rate just a bit more faster..
Click to expand...
Click to collapse
Thanks for the reply, I have got Fast Charger with the phone. But it is also taking around 2 hours 30 Mins for full charge when the phone is switch on mode. That is why I asked about the charging time.
diemadedrei said:
What fast charger are you using? 2:15 sounds reasonable to me though I never really stopped time on a quick charge 2.0. PC usb Ports output 500 mA, which is far less than even the stock sony charger outputs, so no there is no way to speed that up.
Click to expand...
Click to collapse
Thanks for the reply, I am using the Fast Charger bundled with Z3+.
It did not come bundled with a fast charger here. You mean quick charge 2.0?
diemadedrei said:
It did not come bundled with a fast charger here. You mean quick charge 2.0?
Click to expand...
Click to collapse
Sorry, If "Fast Charger" is diff from "Quick Charger". I have received Quick Charger bundled with Z3+ which is taking more than 2 hours for full charge the phone.
Is it saying "quick charge 2.0" somewhere on the charger? It's a brand by Qualcomm and is faster than just a charger with high Ampere.
The point is that the charge which bundled with Z3+ just a normal charger!! ( well if you think it is)
All you need is a charger with qc2.0
Yep, although QC will wear out your battery faster.
Jackjack_lin said:
The point is that the charge which bundled with Z3+ just a normal charger!! ( well if you think it is)
All you need is a charger with qc2.0
Click to expand...
Click to collapse
But, I received a Quick Charge 2 compatible charger bundled with Z3+
[email protected] said:
But, I received a Quick Charge 2 compatible charger bundled with Z3+
Click to expand...
Click to collapse
Prics of Quick Charge 2 compatible Charger bundled with Z3+
I don't see the QC logo and quick charge 2.0 on your pic. And fast charge is not quick charge. My fast charge completed in about 2.5 hours. My quick charger does it in just over an hour. So I also got a quick charge battery booster as well. Both are by anker and I got on Amazon. Well worth it.
Sent from my E6553 using XDA-Developers mobile app
[email protected] said:
Prics of Quick Charge 2 compatible Charger bundled with Z3+
Click to expand...
Click to collapse
I think the charger is really a quick charger since it have multiple output settings.. But I have read on one of the threads here that QC2.0 does not much boost the charging time of Z3+.. Specially the dual sim variant.. Remember that sony only said that the single variant is the only one that is QC2.0 compatible..
I have encountered a problem with the charging speed of my Xperia Z3+. I have got the single SIM variant and according to the internet it should support QC 2.0. But in reality when I want to charge my device it doesn't feel like QC 2.0. For comparison I have downloaded an app called Ampere on my Z3+ and my Z3 Tablet Compact (its chipset also supports QC2.0 and it seems to work flawlessly) and it displays the current charging flow speed if I'm not wrong. I will attach two screenshots, the higher number of flow is from the tablet and the other of course from my Z3+. Anybody know what might be the problem? I have used the same charger with the same cable.
Have anyone better and cheap charger what is supported now on oreo? i want to buy it...
Try AliExpress.com
I use a 10w iPad charger and it's great. Charges really fast
TerQQ said:
Have anyone better and cheap charger what is supported now on oreo? i want to buy it...
Click to expand...
Click to collapse
whats wrong with the stock charger?
in oreo update is fast charging feature, then i am searching charger to use that.
Sir i wanted to know which charger should i use to get fast charging after oreo update??
TerQQ said:
in oreo update is fast charging feature, then i am searching charger to use that.
Click to expand...
Click to collapse
Yogesh9694 said:
Sir i wanted to know which charger should i use to get fast charging after oreo update??
Click to expand...
Click to collapse
This has been discussed, it's not charging any faster than it did in Nougat. All they did was add the text to tell you it was fast charging, which to them means charging above 1A. True fast charging would be 50% in less than 30 minutes, definitely this update is not going to do that, no matter what charger you use.
But after oreo update there is a little improvement in charging speed... I charged my A1 in switched off and phones charged in 1hr 35 min from 0 to 100%...and i used the stock charger...
Yogesh9694 said:
But after oreo update there is a little improvement in charging speed... I charged my A1 in switched off and phones charged in 1hr 35 min from 0 to 100%...and i used the stock charger...
Click to expand...
Click to collapse
Doing some very basic math.
3000mAh battery.
Charging rate of 2000mAh
That would equate, if the battery were truly at 0%, and charged truly to 100% full 3000mAh capacity, of 90 minutes, in an ideal world. Of course, there are some things that come into play, such as overhead.
With my USB measuring tool, I am able to see the voltage around 5.10-5.20v, and the amperage around 1.85-1.94A. This is with a Qualcomm QuickCharge 3.0 charger, so I know for certain that it is not doing a higher voltage charge. I can also see that it is not doing a higher amperage charge.
Given this, I will have to see about doing a complete drain on the phone, and then charging, and seeing where 100% is indicated on the phone, in terms of capacity, as my tool can measure the amount sent over USB as well.
To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the Xiaomi Redmi Note 5 Pro can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
2 Hour With Stock Charger
I didn't completely check the ratings and time but stock charger DOES NOT fast charge this phone. as the Stock Charger isnt QC2.0 Supported. However this mobile does support QC2.0 but you'll have to test QC2.0 Charger 1st. Not all QC2.0 Chargers work on this mobile. Its a little picky. So go to a shop check QC2.0 Chargers on your mobile. when you get circle Sign on notification bar along side battery then it means that device is fast charging. if not then there will be no circle around the charging sign (Flash sign)
also idt this mobile supports QC3.0 but i dont have tools to check amps volts of charger.
Lenovo's original QC3.0 charger doesnt work on this phone. I've tested. but Motorola's QC3.0 Charger works fine.
my rn5 pro , takes apporx 3 hours to charge completely!
So far I'm a bit slow, a little bit more than 3 hours to completely charge the phone. Might have something to do with the cable.
My current charging setup:
- ANKER 5 port 40W
- a docomo USB cable
Planning to buy a proper 20AWG usb cable and a QC2.0 adapter.
I just bought a Letv charger which supported qc3.0 for about 4$ on taobao
I'm currently on the 9.5.11 build and it takes about 4-5 hours to completely charge the device using stock charger, And it took about 2-3 hours while on 9.2 build.
I wonder if the Mi QC 3.0 based charger would improve the situation for us?
piyush95 said:
I'm currently on the 9.5.11 build and it takes about 4-5 hours to completely charge the device using stock charger, And it took about 2-3 hours while on 9.2 build.
I wonder if the Mi QC 3.0 based charger would improve the situation for us?
Click to expand...
Click to collapse
Slow charge is a known bug in 9.5.11 build. Wait for an update or change ROM
13,2W for me
I recieved 9.2.13 update yesterday and have been noticing significant boost to charging speeds since then...yet to fully charge from 0 so can't comment on total time but as per Ampere, charging speeds are in range of 1500 to 1700 mah
1000 mA max with 5v 2amp and Work Normal Speed with Stock Charger
Approximately 2 hour for charge phone
I use the app Ampere (free in Playstore) to measure power input and with a normal charger (non QC) it shows up to 1600 mAh charging amount and from almost 0 to 100% it is taking 2,5 hours. One question: is there a way to tell if QuickCharge is active?
@Kusie
Look on your"s phone status bar. With normal charging there is thunder icon next to the battery. With QC active, thunder in in circle as far as I remember. Info about active QC should be also displayed in the bottom of your lockscreen
Sent from my flo using XDA Labs
Using my usb inline meter, i'm getting ~6.5v and ~2.2A, with a Tronsmart usb cable and QC 3.0 Truro charger, screen off and about 44% remaining on battery. Will try when the battery is lower some other time.
takes around 2hours to charge 100% using stock charger..
1h 30min with a Quick Charger from Anker.
Cel00 said:
1h 30min with a Quick Charger from Anker.
Click to expand...
Click to collapse
Not possible.
Incogn said:
Not possible.
Click to expand...
Click to collapse
Of Course it's true, why should I lie?
Turned off the Phone at 5% and charged it to 100%....
Cel00 said:
Of Course it's true, why should I lie?
Turned off the Phone at 5% and charged it to 100%....
Click to expand...
Click to collapse
I have no idea why would you do that... But read reviews, no matter what kind of charger you use, this phone only supports qc 2.0 version. From 0 to 100, in 1 hour, you only get like 55%, and in the end it slows down even more, so yes, impossible to fully charge in 1.5h, TECHNICALLY IMPOSSIBLE. You are either lying, or mixed times and got confused. Judging by technical parameters, the best this phone can do should be around 2hours from 0 to 100.
Incogn said:
I have no idea why would you do that... But read reviews, no matter what kind of charger you use, this phone only supports qc 2.0 version. From 0 to 100, in 1 hour, you only get like 55%, and in the end it slows down even more, so yes, impossible to fully charge in 1.5h, TECHNICALLY IMPOSSIBLE. You are either lying, or mixed times and got confused. Judging by technical parameters, the best this phone can do should be around 2hours from 0 to 100.
Click to expand...
Click to collapse
I just posted above that I was able to get QC 3.0 charging rates. Approximately 2.2A (fluctuates +/- 0.1A) and 6.6v (fluctuates +/- 0.2v) using a QC 3.0 charger and Tronsmart cable. Measured using an inline meter, not software.
To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the Nokia 6 (2018) can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
There's an 18W charger included. I believe the claims of 50% in 30 minutes are pretty accurate.
BrunkBeard said:
There's an 18W charger included. I believe the claims of 50% in 30 minutes are pretty accurate.
Click to expand...
Click to collapse
I second the above - also getting pretty good charge times using an 87W macbook pro charger!
BrunkBeard said:
There's an 18W charger included. I believe the claims of 50% in 30 minutes are pretty accurate.
Click to expand...
Click to collapse
yahh me too :good:
HEAT!!
BrunkBeard said:
There's an 18W charger included. I believe the claims of 50% in 30 minutes are pretty accurate.
Click to expand...
Click to collapse
But also heats up
hi guys,
I have recently bought this smartphone and I have one question. When I use its own charger the default mode of charging is fast charging but I don't want always to use fast charging since it's not good for the battery life-time. Is there anyway I can do to disable fast charging?
thanks
omidreza said:
hi guys,
I have recently bought this smartphone and I have one question. When I use its own charger the default mode of charging is fast charging but I don't want always to use fast charging since it's not good for the battery life-time. Is there anyway I can do to disable fast charging?
thanks
Click to expand...
Click to collapse
I believe the only way is to use another charger, because this is all hardware related.
Hi people,
are there any other 3rd party chargers for nokia 6 that you would recommend.
BrunkBeard said:
I believe the only way is to use another charger, because this is all hardware related.
Click to expand...
Click to collapse
Hi. I have just bought this phone and it was all fine. I needed another charger for work so bought a 3Rd party one. It was fine the first few times, but now when I connect it the phone automatically shuts down and will not start again. According to the tech that checked it out, the battery was completely flat.
I suspect I can only use a OEM charger. Really inconvenient.
Nokia lie about fast charge between 0 % to 50 % in 30 minutes . I tested it many time 50 minutes to charge 50 %
WellyAlley said:
Hi. I have just bought this phone and it was all fine. I needed another charger for work so bought a 3Rd party one. It was fine the first few times, but now when I connect it the phone automatically shuts down and will not start again. According to the tech that checked it out, the battery was completely flat.
I suspect I can only use a OEM charger. Really inconvenient.
Click to expand...
Click to collapse
Not true. I have never used the OEM charger. Fast charging is tough on the battery as others have said. I have several other chargers (one came with my audio chromecast, one came with an old HTC phone, one is a no-name charger). They are rated anywhere from 1 amp to 1.9 amps. All have worked perfectly. At work I leave my phone on my desk so leaving it plugged in until charged regardless of how long it takes is no big deal. I also make sure to take it off charge once it reaches 100%. It is not good to leave it on charge when full.
More than 2 amps at 5vdc are overkill for the battery and it's causing nothing but a superfast degradation but hey we have superfast charge on a cheapster ...
kobajagrande said:
Hi people,
are there any other 3rd party chargers for nokia 6 that you would recommend.
Click to expand...
Click to collapse
I'm using an old Aukey QC2.0 charger that I bought 3 years ago for my Zenfone2, it charges quick too. Using a meter I checked that the Nokia charger is using QC3.0 and for instance can charge at 6V/2A or about whatever voltage it wants, but my QC2.0 charger is 5/9/12V only and with a meter I checked it is charging at 9V and ~1.6A. My car charger is also a QC2.0 charger and works too, on the lock screen is it written "fast charging" and yes, it does.
The chargers I use daily for 3 years now (I have the old 2.0 version but now they are 3.0 version)
https://www.amazon.com/AUKEY-Charger-Charge-Samsung-Galaxy/dp/B01BBZJ31Y
https://www.amazon.com/AUKEY-Charger-Samsung-Qualcomm-Certified/dp/B01B2BMIMS
so practically using QC 2.0 and QC 3.0 got same charging speed? so what is the advantage of using QC 3.0? can anyone give some info?
QC2.0 is something like 5V/2A, 9V/2A and 12V/1.5A, while QC3.0 voltage range is wider, something like 5V to 20V, requested by the device, it can be 6V/3A for instance. Battery management is better I guess.
DON2003 said:
so practically using QC 2.0 and QC 3.0 got same charging speed? so what is the advantage of using QC 3.0? can anyone give some info?
Click to expand...
Click to collapse
For Nokia 6.1 plus yes, tested.