Hi ...
I'm a little confused about how to flash arter97 Recovery on G928I
Do I just install this from Odin ?
Thanks
Yes. But make sure to go to recovery directly after flashing the recovery and flash arter97's kernel and SuperSu Zip instead of booting the device. Otherwise the recovery will be reverted back to the stock one.
Related
Hi,
I had several problems with custom rom, so I went back to stock ROM (latest MOB version) to start everything new.
Now I got the problem that it is not possible to flash CWM or TWRP again (tried different versions to flash with odin). I also tried to get back to UHOL2 bootloader and modem, bootloader is now UHOL2 but also custom recovery not working.
Any ideas how to get TWRP working again?
Thx
Jürgen
Can you root it?
Then you might be able to use flashify to flash the recovery.img
xdajuecat said:
Hi,
I had several problems with custom rom, so I went back to stock ROM (latest MOB version) to start everything new.
Now I got the problem that it is not possible to flash CWM or TWRP again (tried different versions to flash with odin). I also tried to get back to UHOL2 bootloader and modem, bootloader is now UHOL2 but also custom recovery not working.
Any ideas how to get TWRP working again?
Thx
Jürgen
Click to expand...
Click to collapse
Uncheck auto-reboot before flashing TWRP trough Odin.
used CF Auto root - Phone Info says that root is working
which recovery.img should I try - CWM or TWRP doesn't matter for me
TWRP. CWM is outdated.
Uncheck auto-reboot before flashing TWRP trough Odin and removing battery was the solution!
Thx
Selecting auto reboot after flashing twrp causes the stock recovery to overwrite twrp and this is why the phone should be booted into twrp right after flashing.
So I rooted my Samsung Galaxy J5 (SM-J500FN) by flashing CF-Autoroot with ODIN, and then I wanted to flash TRWP so I could install XPosed Framework.
After flashing TRWP with no errors on ODIN, if I try to reboot normally or in recovery the screen slowly turns green?
I managed to get into Download mode and connected to ODIN, but I cannot flash a new ROM as you cannot flash .zip files. (I have a LineageOS rom and my Stock ROM with build number J500FNXXU1BQA4)
up2 said:
So I rooted my Samsung Galaxy J5 (SM-J500FN) by flashing CF-Autoroot with ODIN, and then I wanted to flash TRWP so I could install XPosed Framework.
After flashing TRWP with no errors on ODIN, if I try to reboot normally or in recovery the screen slowly turns green?
I managed to get into Download mode and connected to ODIN, but I cannot flash a new ROM as you cannot flash .zip files. (I have a LineageOS rom and my Stock ROM with build number J500FNXXU1BQA4)
Click to expand...
Click to collapse
The screen turns green when you flash the wrong TWRP (not corresponding to your Android version) or when you flash Lollipop roms over Marshmallow and vice versa (except MM/N cm/aosp roms which must be flashed on LP).
You can flash only stock rom (.tar format file) with Odin.
TWRP for lollipop 5.1.1: https://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j5-t3468844 .
TWRP for Marshmallow 6.0.1: https://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960 .
Flash the correct TWRP according to your Android version. I believe you must reflash stock rom with Odin first since you're screen is turning on, but try to flash the correct TWRP first and see if you get rid of your problem. If not, then reflash stock rom and then flash TWRP again.
#Henkate said:
The screen turns green when you flash the wrong TWRP (not corresponding to your Android version) or when you flash Lollipop roms over Marshmallow and vice versa (except MM/N cm/aosp roms which must be flashed on LP).
You can flash only stock rom (.tar format file) with Odin.
TWRP for lollipop 5.1.1: https://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j5-t3468844 .
TWRP for Marshmallow 6.0.1: https://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960 .
Flash the correct TWRP according to your Android version. I believe you must reflash stock rom with Odin first since you're screen is turning on, but try to flash the correct TWRP first and see if you get rid of your problem. If not, then reflash stock rom and then flash TWRP again.
Click to expand...
Click to collapse
Wow, thanks a lot.
The thread where I got the TWRP from didn't show that it was for 5.1.1, I flashed TRWP for 6.0.1 and my phone worked again and the TWRP works!
Thanks!!
Hello. I have SM-9005 and by mistake I flashed the latest TWRP (3.2.3.0) when it should be flashed the 2.8.7.0. Successfully I reverted to recovery and firmware stock, but when when I tried to flash again to use the TWRP 2.8.7.0 the phone enters in Odin mode and says it could not do normal boot. However, I always succeed in flashing the 3.2.3.0 version. From the file list my TWRP 2.8.7.0 is the hltexx version and still can't flash it.
Without that TWRP I can't instal the MAGMA roms. I tried installing older versions of TWRP but with no success. Any thoughts? Thanks.
P.S: already found the solution. Wrong TWRP
i tried to flash twrp 3.0 on my smn9005 HLTE but when i try to boot recovery it says
Booting Recovery
Bit Set Warratnyy: Recovery
then black screen apeears mobile vibrate 2 time and then retart as normal my phone is not bricked then i tried twrp 2.8.7.0 it worked fine but i am not able to install any cutom rom it gives error 3004, this rom is for HLTE, HLTEXX etc, what should i do my phone is currently running on stock LP 5.0 and i am 100% sure my phone is HLTE, HLTEXX but new twrp wont work and on older i cannot install any rom even after advance wipe
<i tried twrp 2.8.7.0 it worked fine but i am not able to install any cutom rom
ANY really or just one or two ??
2.8.70 works fine on roms but not for later ports .( see multiple posts)
If you need a later twrp .
Flash 2.8.7.0 then through TWRP flash later TWRP zip.
JJEgan said:
<i tried twrp 2.8.7.0 it worked fine but i am not able to install any cutom rom
ANY really or just one or two ??
2.8.70 works fine on roms but not for later ports .( see multiple posts)
If you need a later twrp .
Flash 2.8.7.0 then through TWRP flash later TWRP zip.
Click to expand...
Click to collapse
thank you for reply, i tried to flash twrp 3.0.zip with twrp 2.8.7.0 but i came up with same issue untill now i have tried
Potato chips(pie), AOSP 9.0 extended all failed to flash in twrp 2.8.7.0 , i cant understand why it is happening now i am flashing repair firmware then i will try it back if it fails then i will downgrade to stock 4.4 again try, i also tried Linegae 14.1 it flashed succesfully but caused bootlops now i am again back to stock
i think i cannot upgrade more from 6.0 now i am downloading TouchWiz MM :crying: :crying:
lastwarning91 said:
thank you for reply, i tried to flash twrp 3.0.zip with twrp 2.8.7.0 but i came up with same issue untill now i have tried
Potato chips(pie), AOSP 9.0 extended all failed to flash in twrp 2.8.7.0 , i cant understand why it is happening now i am flashing repair firmware then i will try it back if it fails then i will downgrade to stock 4.4 again try, i also tried Linegae 14.1 it flashed succesfully but caused bootlops now i am again back to stock
Click to expand...
Click to collapse
When u flash new TWRP first time ,backup your efs (imei,modem).
Second with TWRP 2.8.7.0 u can only flash stock Samsung rom that have aroma support.
Only TWRP 3.2.3.0, this is the latest can flash Oreo ,pie ,nougat roms without issue. But remember u can't flash Samsung roms with this and u have to go back to twrp 2.8.7. Then go back to 3.2 if u wanna flash pie ect roms
Hi all
I can successfully flash twrp-2.8.7.0-hlte-4.4.img.tar and boot into recovery.
But later TWRP,s dont boot.
JJEgan says to flash 2.8.70 and if you need a later twrp flash 2.8.7.0 then through TWRP flash later TWRP.zip.
Question is where can i get a zip of the latest TWRP. The official releases are either img or tar
Thanks
grwalker said:
Hi all
I can successfully flash twrp-2.8.7.0-hlte-4.4.img.tar and boot into recovery.
But later TWRP,s dont boot.
JJEgan says to flash 2.8.70 and if you need a later twrp flash 2.8.7.0 then through TWRP flash later TWRP.zip.
Question is where can i get a zip of the latest TWRP. The official releases are either img or tar
Thanks
Click to expand...
Click to collapse
The Twrp are always .img.tar or .img or even apk from play store https://play.google.com/store/apps/details?id=me.twrp.twrpapp. Anyway, i flashed twrp 3.2.3.0 from 2.8.7.0 ( the same one you had ) using Odin 3.11.1 without a single problem! Mybe the problem is just the Odin's version you used, have a look here too to better understand https://www.theandroidsoul.com/how-to-install-twrp-recovery-using-odin/. I hope you can solve it, good luck.
Thanks
When using 2.8.7.0 to flash latest TWRP.img, did you flash to boot or recovery? I get those choices after i select the file to flash. I assume recovery, right?
************ - -UPDATE - -*****************
Flashed img to recovery. All good, said flashing successful . . .but
Tried to reboot to new recovery but got the same boot loop.
Flashed 2.8.7.0 again using ODIN and 2.8.7.0. booted up just fine.
Re flashed 3.2.3.0 from 2.8.7.0. Again the same boot loop
Went back to 2.8.7.0 using ODIN. Booted up.
no idea what to do next
Thanks
I have same issues towards my hlte, twrp ver release later than what you indicated causes recovery boot loops, only 2.8 works. I cant even install custom rom due to unupdated twrp support.
echo-26 said:
I have same issues towards my hlte, twrp ver release later than what you indicated causes recovery boot loops, only 2.8 works. I cant even install custom rom due to unupdated twrp support.
Click to expand...
Click to collapse
You need to read first.
TWRP cannot flash Aroma based roms after 2.8 as per multiple posts .
Later android based roms use later TWRP 3 versions all posted .
There are soo many variants of samsung galaxy grand prime and therefore I'm confused to find twrp recovery for my phone.
My phone details.
Samsung Galaxy Grand Prime
SM G530H
Baseband version : G530HXCU1BPB1
Someone please help me to find stable twrp recovery for my device.
Also tell me what happens if I installs twrp recovery of other variat of samsung grand prime.
Regards
Hi
You have Fortunve3g , you have to flash Fortuna3g's Twrp because there isn't any Twrp for fortunve3g.
https://dl.twrp.me/fortuna3g/twrp-3.4.0-0-fortuna3g.img.tar
But after flashing this with Odin or whatever , you should flash this one with Twrp ( pitch black recovery for fortunve3g ):
https://forum.xda-developers.com/grand-prime/development/unofficial-pbrp-grand-prime-t4048881/amp/
If you install the wrong recovery, when you boot the phone into recovery, your phone will go into download mode. Of course, this does not happen in some close models, but some errors will happen during the installation of custom roms .
Feoder said:
You have Fortunve3g , you have to flash Fortuna3g's Twrp because there isn't any Twrp for fortunve3g.
https://dl.twrp.me/fortuna3g/twrp-3.4.0-0-fortuna3g.img.tar
But after flashing this with Odin or whatever , you should flash this one with Twrp ( pitch black recovery for fortunve3g ):
https://forum.xda-developers.com/grand-prime/development/unofficial-pbrp-grand-prime-t4048881/amp/
If you install the wrong recovery, when you boot the phone into recovery, your phone will go into download mode. Of course, this does not happen in some close models, but some errors will happen during the installation of custom roms .
Click to expand...
Click to collapse
Thanks for replying...but!
If I install twrp fortuna3g recovery will it run stable and why should i need to flash black pitch recovery using twrp fortuna3g recovery.
BTW I've downloaded this file
https://androidfilehost.com/?fid=962157660013068307
Will it work or I should try your method?
Regards
kamran112 said:
Thanks for replying...but!
If I install twrp fortuna3g recovery will it run stable and why should i need to flash black pitch recovery using twrp fortuna3g recovery.
BTW I've downloaded this file
https://androidfilehost.com/?fid=962157660013068307
Will it work or I should try your method?
Regards
Click to expand...
Click to collapse
I already told you why.
Well, I didn't know about this file, flash it , it's work.