Greetz! Maybe can me somebody from Germany help, my device got run...From unknown source i downloaded and flashed a ROM, that was not for E7... After boot many systemfailure-popups in ab. 5 min make a reboot... Can nothing download from my Phone (with ES-Explorer)... My apps and settings (WLAN, Google account) are all correct and for a short time can i use... I can´t flash again, on PC with Flashprogram my device not listed...
Please help me! (PM!)
Related
Hello people i was using the new patch for 0% issue i mean the (fix arc, neo) upd v3.1 posted by Bazoocase and everything was all right,
i downloaded the app titanium and somehow i delete a file that i shouldn't delete, now my arc constantly reboot and when i try to charge with the official usb charger there is only a red light blinking for 2 or 3 minutes and then the phone turns on completely but after 1 or 2 minutes it shut down again and keep doing that all the time, tried to use the fast boot and does not recognize the phone, also tried to use the flash tool and no response,
every time i connect it to the computer it says device not recognized, i am desperate because i don't know what to do, maybe one of you guys can point me at the thread to solve this problem because i have been looking but i can't find the solution, or if somebody knows what to do plz enlight me since i am a really junior member
thks in advanced
Check this thread: http://forum.xda-developers.com/showthread.php?t=1312398
Hey guys i've Hard Bricked my Yureka. Phone Doesnt turn on nor goes to fastbooot, instead is only detected in windows as Qusbs-Bulk. Please help ME
Follow the steps shown in link below;
https://cyngn.com/support/
http://forums.yuplaygod.com/threads/factory-images-and-flashing-tools-official.2178/
But my phone does not boot into fastboot
Search at play god forum, there are some procedures given there which may solve your prob. http://forums.yuplaygod.com/threads/help-completely-bricked.4641/#post-45794
HI thanks for help but in all above cases they were soft bricked ..i.e their phones booted in fastboot but mine isnt.
Hmmm ... seriously worried situation haan. {Kiya kya tumne}
If you can tell us what exactly you did, may be then we can help.
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Exactly me too flashed miui of f2 without boot.img..Was trying to port...
@ Suhas Is the new phone same as old one or a used one??
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
I also hardbricked when i tried to port MIUI, Now waiting for the repacement.
Called them and raised the ticket 6 days before, but they are yet to dispatch.. . . . Very frustrating !
Do you have any information on how to unbrick. I searched much but wouldn't find files to unbrick !
1. 8939_msimage.mbn
2. MPRG8939.hex
3. rawprogram0.xml
4. patch0.xml
Hope some one comes to rescue me :crying:
Video Tutorial HOW TO UNBRICK YUREKA
Srry i cant post the youtube link as i am new here
Just go to youtube
Search kanwal deep unbrick yureka
And watch the video
To go in fastbool mode remove battery insert again and press vol up while connecting usb
quakze said:
I also hardbricked when i tried to port MIUI, Now waiting for the repacement.
Called them and raised the ticket 6 days before, but they are yet to dispatch.. . . . Very frustrating !
Do you have any information on how to unbrick. I searched much but wouldn't find files to unbrick !
1. 8939_msimage.mbn
2. MPRG8939.hex
3. rawprogram0.xml
4. patch0.xml
Hope some one comes to rescue me :crying:
Click to expand...
Click to collapse
ahh Same situation I too searched for that files when i had bricked my device
Since the chipset is new. So not able to find
suhas.holla said:
ahh Same situation I too searched for that files when i had bricked my device
Since the chipset is new. So not able to find
Click to expand...
Click to collapse
I have got rom of Huawei C199s (MSM8939), which has many file packed into UPDATE.APP.
I have unpacked it, but the file name and extensions are unknown.
At present I am trying to identify the msimage.mbm and mprg files.
The rom link is http://www.needrom.com/wp-content/uploads/2015/03/C199s-V100R001C92B260-Telecom.zip
Shrihari007 said:
Hey guys i've Hard Bricked my Yureka. Phone Doesnt turn on nor goes to fastbooot, instead is only detected in windows as Qusbs-Bulk. Please help ME
Click to expand...
Click to collapse
ask for replace in customer care. as they told they will replace your mobile even after unlocking boot loader, root.
my device also gone hard bricked not get into the fastboot mode..
and no customer care no. to contact not correct > this one 18602122122
any help
thnks..
You guys can take a look at this thread -
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Hit thanks to the creator and me if helped.
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
What did you tell the customer support about your phone getting bricked.
I tried calling the support, but they said that they will chargers. 3000 for replacing .
please help
my device got bricked 2 days ago and now there is no fastboot mode and not even the led lights showing up if the device is connected to the pc!! and whats even worse the cc is not picking up the calls
my mobile also hard bricked.
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
hi.... my yu yureka also get hard bricked after installing lollipop update from yu.. please tell me the steps you followed to replace your yureka...... please reply fast...
:crying::crying::crying:
issue regarding in functionality in yu yureka after upgrading with lpllipop
dear sir,
my name is anurag. i am using yureka ao 5510 phone after launching official update for phone i upgrade my phone.
i faced sevral problem after updating. the list are provided below.
1) overheating device than normal one while comparing with kitkat.
2) automatically turned off and un- responsive and on screen multicolor circle appeared wih cross over circle, its upto 5-6 hrs after that suddenly screen appeared after turning on mobile and start working.(in this process sevral times i remove battery & reinsert and trying to start it normally).
3) when phone connecting to wi-fi hotspot network (apple tablet over 3g) and i am trying to update apps from playstore its not updated(google play services unfortunately stopped) over wi fi network, but its working good on mobile data.
4) now currently issue in brightnesss control and in setting < storage option < USB computer connection the checkbox option are not apperared & phone not connected to computer(using windows 8.1 ),
please kindly fix this buges...
and provide some patch or system updates as earliar as possible to overcomethis issue.
Hi,
Bought the Meizu MX4 Pro recently. But upon first switch on, i got the screen showing: battery < 20%, cannot proceed with upgrade.
Now, once the battery was charged, i got the recovery screen to update and clean (With Flyme Logo), or to restart. Upon choosing restart, it stuck on the Flyme logo rotating...
I have downloaded the Flyme OS (5A, 4.5.7A, 4.5.7.1A, 4.5.7I) and placed it in the recovery drive of the mobile when connecting to a pc... but each and everytime, the screen shows checking firmware, then Firmware corrupt sign appears...
Thanks to point me in right direction... or what steps i need to follow to restore the mobile... I cannot find a dedicated forum for Meizu MX4 pro, only Meizu MX... i will try to post it there too, but if there is a better link please let me know...
Thanks,
Jinen
same problem! did you solve it? and even if i wanna clear data a screen with the unblock numbers appears and when i write my code i can't because there is just like 1 point every time i click instead 4 points so i must to restart again and the globe rotate again and system upgrade is always corrupt doesn't matter which firmware old or the latest... :S
Jinen_A said:
Hi,
Bought the Meizu MX4 Pro recently. But upon first switch on, i got the screen showing: battery < 20%, cannot proceed with upgrade.
Now, once the battery was charged, i got the recovery screen to update and clean (With Flyme Logo), or to restart. Upon choosing restart, it stuck on the Flyme logo rotating...
I have downloaded the Flyme OS (5A, 4.5.7A, 4.5.7.1A, 4.5.7I) and placed it in the recovery drive of the mobile when connecting to a pc... but each and everytime, the screen shows checking firmware, then Firmware corrupt sign appears...
Thanks to point me in right direction... or what steps i need to follow to restore the mobile... I cannot find a dedicated forum for Meizu MX4 pro, only Meizu MX... i will try to post it there too, but if there is a better link please let me know...
Thanks,
Jinen
Click to expand...
Click to collapse
Which your flyme version A o I? Do you remember the version that you have before flash? Try flash With 4.2.8.2(With the correct version A or I) good luck
Sent from my MX4 using Tapatalk
I have same problem.
javimad86 said:
same problem! did you solve it? and even if i wanna clear data a screen with the unblock numbers appears and when i write my code i can't because there is just like 1 point every time i click instead 4 points so i must to restart again and the globe rotate again and system upgrade is always corrupt doesn't matter which firmware old or the latest... :S
Click to expand...
Click to collapse
I have some problem with you, after I upgrade Firmware International to China. Before I don't now what firmware I use, I just follow step at internet tutorial upgrade Flyme OS, and I have wrong download firmware China. After that while I want to upgrade again the PIN password just can click only one number even though my PIN is 6 number. So while I click the first PIN the Command saya "Password is Wrong".
What I have to do please help me about this problem ...?
If your on (I) International download (I) version if your on (C) China download and so fourth. I found this site and it has worked for me https://www.flyme.cn/firmwarelist-7.html By the way Beta will never work on the Chinese model since they went with the only 3 traditional firmware upgrades for outside actual China itself! Hope this helps it owrked for me and I am on the Chinese model.
hello, i need help with my device ‘’is bricked’’, i never modify the any software. only thing I did was an official update to (marsmallow 6.0.1). from that moment when i turn off/on my divice he is in bootloop. my device turn on several times
from this time.. i tryed to install bootloader unlock apk. to change the android version to> (lollipop firmware). but don't unlock, close with error.
Now my phone is no longer turn on :crying::crying: :crying: i try factory reset. FINE but bootloop dont stop. i try change recovery > twrp3.0 FINE i try installing the lasted official firmware from OP. but bootloop dont stop. the internal memory i believe is good.
Can someone help me pleasee
The fastboot work fine but adb slide do not work.. i lose the usb debuggin option. in factory reset. i can't turn on my device right now. i need unlock bootloader via fastboot?? how I can do? help plz
sorry for my English im from venezuela!
note: I find it very difficult to send my device techsupport of asus and is a loot of money for me.
my device is an asus zenfone 2 laser ze551kl > z00t > z00td the last firmware used on it (marshmallow) and I lose the stock recovery 3e S: fastboot work fine.. adb work but I need activate the developer option debuggin. (I cant turn on my device) :S
I can pay for the help, via bitcoin. please i want help. 30$ usd for those who help me fix it. please!!!!!
Did you fix yet?
I have the same model and in same situation, in my case its not charging also it keep blinking the charge icon. any help appreciated.
JesusFlores.1 said:
hello, i need help with my device ‘’is bricked’’, i never modify the any software. only thing I did was an official update to (marsmallow 6.0.1). from that moment when i turn off/on my divice he is in bootloop. my device turn on several times
from this time.. i tryed to install bootloader unlock apk. to change the android version to> (lollipop firmware). but don't unlock, close with error.
Now my phone is no longer turn on :crying::crying: :crying: i try factory reset. FINE but bootloop dont stop. i try change recovery > twrp3.0 FINE i try installing the lasted official firmware from OP. but bootloop dont stop. the internal memory i believe is good.
Can someone help me pleasee
The fastboot work fine but adb slide do not work.. i lose the usb debuggin option. in factory reset. i can't turn on my device right now. i need unlock bootloader via fastboot?? how I can do? help plz
sorry for my English im from venezuela!
note: I find it very difficult to send my device techsupport of asus and is a loot of money for me.
my device is an asus zenfone 2 laser ze551kl > z00t > z00td the last firmware used on it (marshmallow) and I lose the stock recovery 3e S: fastboot work fine.. adb work but I need activate the developer option debuggin. (I cant turn on my device) :S
I can pay for the help, via bitcoin. please i want help. 30$ usd for those who help me fix it. please!!!!!
Click to expand...
Click to collapse
Hello , ive been facing this problem since 2 days ago working day and night to fix it and i didnt found a way to do it.
All started with a Hard brick that detected the device as Diagnostic 900E i did a test point and solve it so easy, then i installed a rom a android 8.0 rom and here is where the problem begun.
It looks like it was all perfect i started with the initial configuration, but when it went for select the wifi the phone reboots all the time. I tried to skip every config and managed to get on the sistem but then it reboots over and over every 1 or 2 min the phone reboots by himself. I flashed a lot of roms and none of them works , wiped everything from normal recovery and twrp and nothing. Does anyone has any info of this issue? A friend of mine who also bought a mia1 had the same problem and he dosn't even knows how to flash a rom...
Also i know is not a batery issue because the phone wont reboot on Recovery or either fastboot mode for hours...
Here is a video so you can see what i'm talking about.
https : / / drive . google . com / file / d / 1gpPkLcR -HJIhEhB46JZ4voMWnQcbQdiU / view ? usp = sharing
scriiby said:
Hello , ive been facing this problem since 2 days ago working day and night to fix it and i didnt found a way to do it.
All started with a Hard brick that detected the device as Diagnostic 900E i did a test point and solve it so easy, then i installed a rom a android 8.0 rom and here is where the problem begun.
It looks like it was all perfect i started with the initial configuration, but when it went for select the wifi the phone reboots all the time. I tried to skip every config and managed to get on the sistem but then it reboots over and over every 1 or 2 min the phone reboots by himself. I flashed a lot of roms and none of them works , wiped everything from normal recovery and twrp and nothing. Does anyone has any info of this issue? A friend of mine who also bought a mia1 had the same problem and he dosn't even knows how to flash a rom...
Also i know is not a batery issue because the phone wont reboot on Recovery or either fastboot mode for hours...
Here is a video so you can see what i'm talking about.
https : / / drive . google . com / file / d / 1gpPkLcR -HJIhEhB46JZ4voMWnQcbQdiU / view ? usp = sharing
Click to expand...
Click to collapse
Bro you chooses wrong script in mi flash
That deleted your imei
Give me your whatsapp or telegram for furthe discussion
I guess I have the same problem maybe i don't have an imei anymore, I should check :
https://forum.xda-developers.com/mi-a1/help/help-stucked-weird-bootloop-flashing-t3721142/page3
https://forum.xda-developers.com/mi-a1/help/mi-a1-imei-help-please-t3742245
https://forum.xda-developers.com/mi-a1/help/ruined-modem-partition-please-help-t3733909
go through this threads bro, you will revive your device for sure good luck mate
Bro persist partition repair fixxed restart problem
Have you solve this?
Write persist in twrp... Search the forum for the persist and guide...
For me writing persist didnt work till i had to switch from slot A to slot B in twrp then phone booted