Related
hello, does anyone have installed pictures of these films on their phone, i would like to see exactly how much coverage they offer, i have searched everywhere but cant find any
BlackAccord said:
hello, does anyone have installed pictures of these films on their phone, i would like to see exactly how much coverage they offer, i have searched everywhere but cant find any
Click to expand...
Click to collapse
I just got my ghost armor in the mail today, it is actually front, back, and then smaller side and top, bottom pieces. I'll see about posting some pics when I install it. Not going to do it tonight, am very tired and don't want to screw it up.
Someone in the Invisible Shield post promised to post pics, but never did. I too was really curious how it looks, since I have never seen one in person.
bilbobrian said:
I just got my ghost armor in the mail today, it is actually front, back, and then smaller side and top, bottom pieces. I'll see about posting some pics when I install it. Not going to do it tonight, am very tired and don't want to screw it up.
Click to expand...
Click to collapse
I would highly appreciate that
Pictures for Invisible Shield (Full Body) on Fuze
Hi all,
Here is my Fuze that i covered with Full Body Invisible Shield. I like it, made it feel rugged and i can really put it at any surface now without worrying about scratching the sides. The four points or should i say eight points of the phone corners are not that protected. The IS has been covering my phone for almost 1 month.
I also increased the brightness and contrast of the pictures when i uploaded it so you guys could see the IS better.
I bought this so called "free lint cloth" from WalMart, but lo and behold, it's not actually lint free, it HAS lots of lint when i used it. So on the back of my Fuze, you will see a few white dots, those are the lints from the cloth. Well, lesson learn, gotta make sure it's lint free cloth
Hope the pictures help. But overall, i really like my IS.
thx for the pics - i wish someone would jsut release a decent non-glossy backcover replacement already for the fuze - i dont want to deal with protecting the back faceted stuff at all.
Do you find the screen protecter to reduce the screen sensitivity/scroll speed at all? The stock screen protector ive found to do this a little bit with my stylus input.
paperdimension said:
Hi all,
Here is my Fuze that i covered with Full Body Invisible Shield. I like it, made it feel rugged and i can really put it at any surface now without worrying about scratching the sides. The four points or should i say eight points of the phone corners are not that protected. The IS has been covering my phone for almost 1 month.
I also increased the brightness and contrast of the pictures when i uploaded it so you guys could see the IS better.
I bought this so called "free lint cloth" from WalMart, but lo and behold, it's not actually lint free, it HAS lots of lint when i used it. So on the back of my Fuze, you will see a few white dots, those are the lints from the cloth. Well, lesson learn, gotta make sure it's lint free cloth
Hope the pictures help. But overall, i really like my IS.
Click to expand...
Click to collapse
Thanks for the pics
Looks good. I will very likely order one as soon as I get the Fuze. Your pics definitely helped me make my decision. It's hard to believe Invisible Shield doesn't have pics like that on their site, so customers can get a real look at what it looks like installed.
Thanks again!
Screen Sensitivity
bpm2000 said:
thx for the pics - i wish someone would jsut release a decent non-glossy backcover replacement already for the fuze - i dont want to deal with protecting the back faceted stuff at all.
Do you find the screen protecter to reduce the screen sensitivity/scroll speed at all? The stock screen protector ive found to do this a little bit with my stylus input.
Click to expand...
Click to collapse
It felt kinda weird after i first applied it, for the first week i would say, the IS feels alien sort of to the Fuze, but after that i let it cured under a desk lamp every night. During this time, i almost think about removing it and not using it, but i let it go and just wait after a few days and voila, it's really becoming the skin of my Fuze.
The screen becomes a little bit sticky with the stylus, i do have to get used to it, but after the first week, everything is good.
Eh. invisibleSHIELD doesn't do it for me. I'm ordering bodyguardz. It looks to unprecise.
paperdimension said:
Hi all,
Here is my Fuze that i covered with Full Body Invisible Shield. I like it, made it feel rugged and i can really put it at any surface now without worrying about scratching the sides. The four points or should i say eight points of the phone corners are not that protected. The IS has been covering my phone for almost 1 month.
I also increased the brightness and contrast of the pictures when i uploaded it so you guys could see the IS better.
I bought this so called "free lint cloth" from WalMart, but lo and behold, it's not actually lint free, it HAS lots of lint when i used it. So on the back of my Fuze, you will see a few white dots, those are the lints from the cloth. Well, lesson learn, gotta make sure it's lint free cloth
Hope the pictures help. But overall, i really like my IS.
Click to expand...
Click to collapse
Thank you so much for posting those pictures, it does worry me a bit that the corners are exposed, you would think that the corners would be the first to hit the ground when dropped but the good thing is that IS doesnt add bulk and allows the fuze to keep its good looks , leaning towords IS but have to do just a lil bit more research
Kraize said:
Eh. invisibleSHIELD doesn't do it for me. I'm ordering bodyguardz. It looks to unprecise.
Click to expand...
Click to collapse
would you consider bodyguardz has the most accurate precission compared to IS, ghost armor, and whatever else? I'm still trying to find a skin that is _specifically_ made for fuze and covering the corners as well.
i am thinking of getting bodyguardz.. been using them ever since
dont like Invisbile shield anymore but the back is good. front sucks
ghost armor never heard of them... might try it.
martinoverlay don't have it for fuze ):
best skinever = don't have it for fuze ):
blah hopefully i can find a discount to get a good deal :d
Insible Shield in Malls
I'm in the LA area and Invisible Shield has kiosk in some of the malls. You can se/touch/feel, etc.. it first hand. I looked at it and am going to have them (they cover the phone in about 45 minutes) my FUZE.
@cyberblue
So far, none of them covered the corners >.> none that I could find. This is because it would peel at corners and come off because they are round and not dead flat straight like the diamond is. There might be later. I ordered Bodyguardz after looking at the pictures and seeing that it looks much tougher and protects MUCH more area. and the invisible shield looks like crap. It is not fit for the fuze. Looking at the pics posted by someone on this forum, You'll notice that the screen protector and the front panel covers are not curved for the fuze. They're just straight.
***EDIT***
I'm curious. Since invisibleSHIELD usually has the correct dimensions and to the looks of this picture, it seems that the OP bought a touch pro body cover instead of a fuze body cover. I think that is a camera hole by the AT$T logo. But I'm not sure. I'll pm the poster of these pictures.
Pic:
Yea,
I did buy the Touch Pro GSM version of IS. Indeed, there is a hole in my AT&T logo, the IS had hole in it, i should have just put the small IS holeto cover it , but my mistake, i threw it out and i forgot about it.
paperdimension said:
Yea,
I did buy the Touch Pro GSM version of IS. Indeed, there is a hole in my AT&T logo, the IS had hole in it, i should have just put the small IS holeto cover it , but my mistake, i threw it out and i forgot about it.
Click to expand...
Click to collapse
Ah. That is why the dimensions of the invisibleSHIELD are a little off.
mstevem said:
I'm in the LA area and Invisible Shield has kiosk in some of the malls. You can se/touch/feel, etc.. it first hand. I looked at it and am going to have them (they cover the phone in about 45 minutes) my FUZE.
Click to expand...
Click to collapse
Hey I live in LA!!! Would you mind telling me which malls have the kiosk? I'd love to check them out.
edit: do they also put it on for you?
villa_bryan said:
Hey I live in LA!!! Would you mind telling me which malls have the kiosk? I'd love to check them out.
Click to expand...
Click to collapse
Doesn't some of the Orange County malls carry em too?
I'm sure it's just a kiosk vending machine time. I don't think it puts it on for you. lol
D3TH METAL said:
I'm sure it's just a kiosk vending machine time. I don't think it puts it on for you. lol
Click to expand...
Click to collapse
I wish, I tried putting on a InvisibleSHIELD last week and that was a disaster.
Very slippery...how are you dealing with that?
u mean the phone itself? i haven t had any problem with the phone being slippery at all... i think it got a nice feel to it
elio said:
Very slippery...how are you dealing with that?
Click to expand...
Click to collapse
put some double sided tape on the back and sides for grip.
jk. I got myself a BSE full body for $9 shipped to UK and now its a hulk. Grip all over and gives me piece of mind that I wont drop or get scuff marks all over! defo check them out! seriously no point buying the other skins mentioned as this does the job and feels/looks v nice!
m00moo said:
put some double sided tape on the back and sides for grip.
jk. I got myself a BSE full body for $9 shipped to UK and now its a hulk. Grip all over and gives me piece of mind that I wont drop or get scuff marks all over! defo check them out! seriously no point buying the other skins mentioned as this does the job and feels/looks v nice!
Click to expand...
Click to collapse
Last thing i'd be worrying about is a scuff mark if i dropped the phone... Have you seen the pics of cracked screens??
m00moo said:
put some double sided tape on the back and sides for grip.
jk. I got myself a BSE full body for $9 shipped to UK and now its a hulk. Grip all over and gives me piece of mind that I wont drop or get scuff marks all over! defo check them out! seriously no point buying the other skins mentioned as this does the job and feels/looks v nice!
Click to expand...
Click to collapse
Can you post a pic?
Grow some bigger manlier hands or put a rubbery case on it and be done with it.
I didn't really have any slipperiness problems, but I put a rubber case on it anyhow as I feel silly putting stickers all over it. (I am using a screen protector.) I care more that it is in good condition than that people see what kind of phone I have though.
The phone isn't slippery like soap. I think what he means is its pretty thin and easy to lose grip of it because of its shape if you dont hold it right. I had a fe close calls with it but haven't dropped it yet.
Oh I get it... I can reach the entire screen & trackball with my thumb the way I hold it though and didn't have any near drops or anything in the days before I put the cover on it. So as I said, grow some bigger hands!
It's not even close to being as slippery as the MyTouch/Ion/Magic.
elio said:
Very slippery...how are you dealing with that?
Click to expand...
Click to collapse
I agree - some times the unit is soooo slippery. I suspect though, with the cold weather, my hands are fairly dry. Try putting some moisturiser (E45?) on & see if it makes any difference!
I think i'm gonna get a sillycone case
sd00 said:
I agree - some times the unit is soooo slippery. I suspect though, with the cold weather, my hands are fairly dry. Try putting some moisturiser (E45?) on & see if it makes any difference!
Click to expand...
Click to collapse
LOL.........
Mate: Man, that's a nice phone!
Me: Yeah just got it the other day!
Mate: Can I have a little play to see what's its like?
Me: No problem, can you just rub some of this E45 in first?
Hella Slippery I just ordered a Silicone Case and Phanton Skinz screen gaurd... I need something on this phone it feels waayyyy too fragile and naked.
Pics of a cracked screen: http://picasaweb.google.com/pspr33/N1#
It should be back with me tomorrow or Monday. If anyone is wondering, HTC UK charge £78 to replace the screen (which includes labour and return postage).
Very slippery & almost dropped it a few times. I have a gel skin til Seidio cases are ready!
spr33 said:
Pics of a cracked screen: http://picasaweb.google.com/pspr33/N1#
It should be back with me tomorrow or Monday. If anyone is wondering, HTC UK charge £78 to replace the screen (which includes labour and return postage).
Click to expand...
Click to collapse
hey where did you find that clock with the weather on it??
The only part for me is opening the backlid. The screen in front doesnt make it easy
elio said:
Very slippery...how are you dealing with that?
Click to expand...
Click to collapse
I hold it the same way I would hold $560 in cash.
(tightly, securely and never leaves my sight)
Rnapole said:
hey where did you find that clock with the weather on it??
Click to expand...
Click to collapse
Try beautiful widgets in the market....
If you can find the old version anywhere it even has the HTC - style flipclock...
My N1 felt too fragile until I got my case now I can have a bit more peace of mind.
love the phone, but it feels TOO light and too cheap...
can you guys think of any way to make the phone heaver, but not make it fatter lol?
nearblack said:
love the phone, but it feels TOO light and too cheap...
can you guys think of any way to make the phone heaver, but not make it fatter lol?
Click to expand...
Click to collapse
Return it and buy an iPhone.
There supposedly is a metal back plate coming out
nacron said:
There supposedly is a metal back plate coming out
Click to expand...
Click to collapse
where did you hear that?
The heavier you make it the more weight comes down on it when and if you drop it the glass its strong but not indestructible
Still flashing , thanks to odin & tw
The Stealthguards "full body" screen protector adds just enough heft to the phone to make it feel nice in the hand. It's actually the only reason I keep it on. It only adds a few grams, but it's enough to make the phone feel not-so-cheap.
My question is "WHY?"
Light and cheap is two different things.
jackhuny said:
My question is "WHY?"
Light and cheap is two different things.
Click to expand...
Click to collapse
+1
10char
nacron said:
There supposedly is a metal back plate coming out
Click to expand...
Click to collapse
If anyone installs this, I'd be interested to hear if it affects the GPS antenna...or maybe it can't get worse!
I use a "mesh" cover available in multiple colors. They add just enough weight and thickness to overcome the "thin and light" feeling in larger hands.
There are cheap ones for a couple bucks and official "Galaxy S" ones that cost US$10-15.
I use the official one (black) and it does the job.
Some like the feel of the extended battery packs...
Sent from my SGH-T959 using XDA App
The cases that T-Mobile had at launch add a substantial amount of weight. It will make it thicker though... But, it's protected and heavier.
If I were you id get this case http://forum.xda-developers.com/showthread.php?t=772826 its cheap and it makes the phone heavier and its a great case
I bought the Body Glove chrome/flex case when i got the device and love it. Has added substantial thickness and heft without making it pocket heavy. It has a fully removable clip that rotates and has an adjustable kickstand that works well in either vertical or landscape mode. Also the clip acts as an excellent finger hold for when gaming or typing along with a gungrip/no slip style rubber backing plate.
Another bonus is it comes with a blank so you can completely remove clip and the stud it connects to, leaving the back flush.
Also google it. It does look good and definitely provides protection. I like how the chrome bezel is high enough to protect the screen if you put/drop it screen down, yet thin enough it doesnt get in the way.
All in all I give the case a 5/5 star rating.
It's nice for the phone to be heavier because if you're in the store and put it down you notice when you're walking away that your phone isn't in you hand if you've been fumbling bags, etc. and got a phone call while shopping. Like my HD2. There's no way I could have forgotten that thing when I had it, because of the weight. It's like walking out of the house without a ball cap. You never really think about it when it's there, but when it isn't you know it.
The vibrant does feel extremely cheap and way too light IMO without a cover on it. It's just too easy to lose or forget. Not to mention the plastic feels yucky if it's hot outside or you've been doing something that makes your hands perspire.
So I got a body glove.
HD2 was different, cause of the Aluminum. Didn't want or need a case for it.
Add some rocks to the charm loop.
Sent from my SGH-T959 using a chihuahua
nearblack said:
love the phone, but it feels TOO light and too cheap...
can you guys think of any way to make the phone heaver, but not make it fatter lol?
Click to expand...
Click to collapse
Tape some lead weights to the back of it but i dont see where that would make it feel more pricey.
I love the weight of my phone and with a case on it, it feels solid.
Vegastouch said:
Tape some lead weights to the back of it but i dont see where that would make it feel more pricey.
I love the weight of my phone and with a case on it, it feels solid.
Click to expand...
Click to collapse
I used lead tape strips on my racket when I played tennis. You could put that stuff on the inside of the battery cover.
Vegastouch said:
Tape some lead weights to the back of it but i dont see where that would make it feel more pricey.
I love the weight of my phone and with a case on it, it feels solid.
Click to expand...
Click to collapse
Yes. We've concluded that the weight with a case is fine.
The weight and feel of the phone without a case is not.
Well, I guess some people can dig it.
I didn't have a problem with my Aria or HD2. Those phones felt solid in my hand without a case.
The Vibrant doesn't. Feels like it could fall apart, so I didn't leave the store without a case when I got it.
And when I had to get a new one because of my first one getting snatched, I had the case waiting for it when it came in the mail
ZX3ZX4 said:
If anyone installs this, I'd be interested to hear if it affects the GPS antenna...or maybe it can't get worse!
Click to expand...
Click to collapse
Maybe this is the gps "fix" everyone is waiting for
Sent from my DEFY using XDA app
So i häve been jusing this phöne over two månths.
And its slippery like a fish in grease oil in a telfon pan. Put the phöne on äny surfajs and it will slide away.
So möj swedish brain thöught i could be fun, why not share fönny pictures with the hint of it. thöught ajm bad in making pictures like maj englesk.
Pajs und löve
Could anyone please explain how this made me chuckle?
Pöst pictures instead.
It's definitely slippery on surfaces xD I normally place it on a small microfiber cloth on my desk when I'm working.
I don't have a problem holding it on my hand though
xxquicksh0txx said:
It's definitely slippery on surfaces xD I normally place it on a small microfiber cloth on my desk when I'm working.
I don't have a problem holding it on my hand though
Click to expand...
Click to collapse
It's slippery alright - my screen cracked on third day of owning it... arghh. It's at Sony repair centre as we speak. Love the phone but will definitely be getting a case for it after repairs.
Simples. If you are keeping it bare, just get Best Skins Ever skin. Takes all the "slipperyness" off.
banter
xxquicksh0txx said:
It's definitely slippery on surfaces xD I normally place it on a small microfiber cloth on my desk when I'm working.
I don't have a problem holding it on my hand though
Click to expand...
Click to collapse
Thats what she said lol
Have you tried taking a bit of coarse sandpaper to the back and sides of the phone? It seems Sony forgot to do this as the last step of manufacturing and that's why it is so slippery. I did mine and now the phone has a nice grip to it.
Good lord!
Mmmm, this phone has kept amazing me on how it squirms over every surface I place it on. The other day I put it on a soft leather loungechair next to me. In the middle of the cushion no less. Watching TV and *thump* as it slides off the leather onto
the floor.
No breakage yet, *knocks on wood.... and sees his phone slide over the desk and off the edge*
Newt182 said:
Have you tried taking a bit of coarse sandpaper to the back and sides of the phone? It seems Sony forgot to do this as the last step of manufacturing and that's why it is so slippery. I did mine and now the phone has a nice grip to it.
Click to expand...
Click to collapse
Oh that is mean
http://www.balolo.de/products/sony-xperia-holzbackcover
I bought this. It's quite nice
I'm still waiting on my "being Built" Moto Maker X Pure. Bamboo and black.
This phone having such customization potential, I'm curious what the majority of you are doing about cases. I've always used a case, but I want to show of my wood back and color choices.. and personally, I'm kind of hoping that it's tough enough to risk using naked daily.
What do you think?
Oh, and I'm likely to keep this for a long time and reselling is not something I'm worried about.
I would go with a clear case, still shows the wood and protects the phone.
I'm either going to get a transparent/translucent case or a good quality bumper. I ended up going for the soft back rather than the leather so I'm more likely to get the case.
Personally, wouldn't keep the phone naked. At the very least, use the provided bumper for some sort of protection.
Dan76 said:
I'm still waiting on my "being Built" Moto Maker X Pure. Bamboo and black.
This phone having such customization potential, I'm curious what the majority of you are doing about cases. I've always used a case, but I want to show of my wood back and color choices.. and personally, I'm kind of hoping that it's tough enough to risk using naked daily.
What do you think?
Oh, and I'm likely to keep this for a long time and reselling is not something I'm worried about.
Click to expand...
Click to collapse
Right now I'm just using the included bumper and a clear skin on the back. It works, but I'll probably move to a clear case once more become available. The clear skin looks fairly good, but it does make the bamboo look a little too shiny.
brholt6 said:
Right now I'm just using the included bumper and a clear skin on the back. It works, but I'll probably move to a clear case once more become available. The clear skin looks fairly good, but it does make the bamboo look a little too shiny.
Click to expand...
Click to collapse
Where did you get the clear skin for the rear? How does it hold up on the curves of the device?
met152 said:
Where did you get the clear skin for the rear? How does it hold up on the curves of the device?
Click to expand...
Click to collapse
Xtremeguard... They're having like a 90% off sale. Its OK. Doesn't cover from edge to edge...which is fine, otherwise the bumper would probably peel it off. It will protect it from scratches for now though. Adds a little grip, but not as much as I had hoped.
brholt6 said:
Xtremeguard... They're having like a 90% off sale. Its OK. Doesn't cover from edge to edge...which is fine, otherwise the bumper would probably peel it off. It will protect it from scratches for now though. Adds a little grip, but not as much as I had hoped.
Click to expand...
Click to collapse
Cool. Thanks for the info and the quick reply.
Awesome, thank you all for the replies. I keep feeling like I won't enjoy the phone unless it's naked, but I know you're right about protection. I may do a clear case... or a rubber bumper when more are released. I saw this one from another post in a different forum: http://www.amazon.com/dp/B0154AQ3QK...colid=MDU2I2LQJJCF&coliid=INJ1ZBZYSLR2L&psc=1 looks decent.
Dan76 said:
Awesome, thank you all for the replies. I keep feeling like I won't enjoy the phone unless it's naked, but I know you're right about protection. I may do a clear case... or a rubber bumper when more are released. I saw this one from another post in a different forum: http://www.amazon.com/dp/B0154AQ3QK...colid=MDU2I2LQJJCF&coliid=INJ1ZBZYSLR2L&psc=1 looks decent.
Click to expand...
Click to collapse
I had that case when I had my Nexus 6. I loved it. Felt great in the hand. That's what I was thinking of going with.
brholt6 said:
I had that case when I had my Nexus 6. I loved it. Felt great in the hand. That's what I was thinking of going with.
Click to expand...
Click to collapse
How pocketable was it with that case... difficult to get in and out?
Dan76 said:
How pocketable was it with that case... difficult to get in and out?
Click to expand...
Click to collapse
Ya, if I remember correctly it was a little difficult on the N6 but not terrible. I'd think it'd be OK on this phone.
I bought this one
http://www.amazon.com/gp/product/B012Y81GXA?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
It sais to preorder but i ordered it and it came in the mail already, dont know if they only made a few or something, you could always email the seller and ask.
Im extremely impressed with it. I bought it as a cheap case to put on till i have more options. My only criticism was that it was a little loose on the sides, so what did i do ? I boiled it! thats right, i looked it up online and people boil tpu cases to shrink them a little. I boiled it in water for 3 minutes. it fits alot more snug now, still not perfect but close enough
I went with an otterbox so my kids dont break my phone
FYI - I've had the included "bumper" on my MXPE almost continuously since I received it.
I removed the bumper yesterday and, to my dismay, found nicks/pits in the longer metal edges of the phone. It looks like the anodized coating has worn away to show the brighter metal beneath (I have the dark grey/titanium metal color). I also noticed upon receipt that there was a slight chip in the finish at the edge of the SIM card door.
Fortunately my MotoMaker re-do unit is on its way to me (decided to go with wood instead of soft-touch), but I'm somewhat disappointed with the robustness of the metal finish. I almost wonder if this is why the "bumper" was packaged with the phone - though it looks like it might've done more harm than good by trapping scratchy debris.
Bottom line - I usually carry my phone naked except with a glass screen protector, but I'm wondering if this MXPE is going to need at least an edge bumper.
(I haven't fully scoured the forums to see if this is a known problem, but I certainly hope the finish on my re-do unit is more durable.)
I'm going naked, I have moto care so I think I will go naked with this phone. So often cases seem to cause more wear than without so I will keep it "pure"
joshuadjohnson22 said:
I'm going naked, I have moto care so I think I will go naked with this phone. So often cases seem to cause more wear than without so I will keep it "pure"
Click to expand...
Click to collapse
Im trying that too, but I am only a month in and I already am seeing spots on the back where it seems that the varnishing is being removed? Have you noticed this yourself?
See-through case, fits like a glove - not loose. The best combination for me personally, the phone is still 100% visible but protected to some degree. Also I find soft silicone cases add more grip to what would otherwise be a slippery phone.
I-blason clear case from Amazon. Very happy with it.
Sent from my SM-T530NU using Tapatalk
I'm currently using the i-blason clear case as well, and I'll second it as good option. I had decent drop onto a hard surface over the weekend, and the phone was no worse for the wear. I also have the Casemate naked tough case coming as well, which should be even better. I'm someone that likes to have a variety of cases (although with this phone I'm probably going to stick with clear ones), so I will probably end up getting a bumper or two as well. I don't think the included bumper is quite as bad as a lot of people said it was, but it fits kind of loose and I can see it breaking with a good drop. As much as I enjoy going naked with the phone, I didn't get Moto care, and the wooden back I got is fairly slippery, and I don't trust myself not drop it occasionally.
I have noticed that the clear bumper that came with the phone has started to scratch the very edges of the rounded glass. I'm going naked now. I don't use screen protectors and generally don't use cases or bumpers. I've never had a problem with scratching my devices. I also never resell my phones (I usually gift them to family members, friends, etc.), so slight scratches aren't a deal breaker for me.
I love this phone in its bare form :good: