I'm still waiting on my "being Built" Moto Maker X Pure. Bamboo and black.
This phone having such customization potential, I'm curious what the majority of you are doing about cases. I've always used a case, but I want to show of my wood back and color choices.. and personally, I'm kind of hoping that it's tough enough to risk using naked daily.
What do you think?
Oh, and I'm likely to keep this for a long time and reselling is not something I'm worried about.
I would go with a clear case, still shows the wood and protects the phone.
I'm either going to get a transparent/translucent case or a good quality bumper. I ended up going for the soft back rather than the leather so I'm more likely to get the case.
Personally, wouldn't keep the phone naked. At the very least, use the provided bumper for some sort of protection.
Dan76 said:
I'm still waiting on my "being Built" Moto Maker X Pure. Bamboo and black.
This phone having such customization potential, I'm curious what the majority of you are doing about cases. I've always used a case, but I want to show of my wood back and color choices.. and personally, I'm kind of hoping that it's tough enough to risk using naked daily.
What do you think?
Oh, and I'm likely to keep this for a long time and reselling is not something I'm worried about.
Click to expand...
Click to collapse
Right now I'm just using the included bumper and a clear skin on the back. It works, but I'll probably move to a clear case once more become available. The clear skin looks fairly good, but it does make the bamboo look a little too shiny.
brholt6 said:
Right now I'm just using the included bumper and a clear skin on the back. It works, but I'll probably move to a clear case once more become available. The clear skin looks fairly good, but it does make the bamboo look a little too shiny.
Click to expand...
Click to collapse
Where did you get the clear skin for the rear? How does it hold up on the curves of the device?
met152 said:
Where did you get the clear skin for the rear? How does it hold up on the curves of the device?
Click to expand...
Click to collapse
Xtremeguard... They're having like a 90% off sale. Its OK. Doesn't cover from edge to edge...which is fine, otherwise the bumper would probably peel it off. It will protect it from scratches for now though. Adds a little grip, but not as much as I had hoped.
brholt6 said:
Xtremeguard... They're having like a 90% off sale. Its OK. Doesn't cover from edge to edge...which is fine, otherwise the bumper would probably peel it off. It will protect it from scratches for now though. Adds a little grip, but not as much as I had hoped.
Click to expand...
Click to collapse
Cool. Thanks for the info and the quick reply.
Awesome, thank you all for the replies. I keep feeling like I won't enjoy the phone unless it's naked, but I know you're right about protection. I may do a clear case... or a rubber bumper when more are released. I saw this one from another post in a different forum: http://www.amazon.com/dp/B0154AQ3QK...colid=MDU2I2LQJJCF&coliid=INJ1ZBZYSLR2L&psc=1 looks decent.
Dan76 said:
Awesome, thank you all for the replies. I keep feeling like I won't enjoy the phone unless it's naked, but I know you're right about protection. I may do a clear case... or a rubber bumper when more are released. I saw this one from another post in a different forum: http://www.amazon.com/dp/B0154AQ3QK...colid=MDU2I2LQJJCF&coliid=INJ1ZBZYSLR2L&psc=1 looks decent.
Click to expand...
Click to collapse
I had that case when I had my Nexus 6. I loved it. Felt great in the hand. That's what I was thinking of going with.
brholt6 said:
I had that case when I had my Nexus 6. I loved it. Felt great in the hand. That's what I was thinking of going with.
Click to expand...
Click to collapse
How pocketable was it with that case... difficult to get in and out?
Dan76 said:
How pocketable was it with that case... difficult to get in and out?
Click to expand...
Click to collapse
Ya, if I remember correctly it was a little difficult on the N6 but not terrible. I'd think it'd be OK on this phone.
I bought this one
http://www.amazon.com/gp/product/B012Y81GXA?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
It sais to preorder but i ordered it and it came in the mail already, dont know if they only made a few or something, you could always email the seller and ask.
Im extremely impressed with it. I bought it as a cheap case to put on till i have more options. My only criticism was that it was a little loose on the sides, so what did i do ? I boiled it! thats right, i looked it up online and people boil tpu cases to shrink them a little. I boiled it in water for 3 minutes. it fits alot more snug now, still not perfect but close enough
I went with an otterbox so my kids dont break my phone
FYI - I've had the included "bumper" on my MXPE almost continuously since I received it.
I removed the bumper yesterday and, to my dismay, found nicks/pits in the longer metal edges of the phone. It looks like the anodized coating has worn away to show the brighter metal beneath (I have the dark grey/titanium metal color). I also noticed upon receipt that there was a slight chip in the finish at the edge of the SIM card door.
Fortunately my MotoMaker re-do unit is on its way to me (decided to go with wood instead of soft-touch), but I'm somewhat disappointed with the robustness of the metal finish. I almost wonder if this is why the "bumper" was packaged with the phone - though it looks like it might've done more harm than good by trapping scratchy debris.
Bottom line - I usually carry my phone naked except with a glass screen protector, but I'm wondering if this MXPE is going to need at least an edge bumper.
(I haven't fully scoured the forums to see if this is a known problem, but I certainly hope the finish on my re-do unit is more durable.)
I'm going naked, I have moto care so I think I will go naked with this phone. So often cases seem to cause more wear than without so I will keep it "pure"
joshuadjohnson22 said:
I'm going naked, I have moto care so I think I will go naked with this phone. So often cases seem to cause more wear than without so I will keep it "pure"
Click to expand...
Click to collapse
Im trying that too, but I am only a month in and I already am seeing spots on the back where it seems that the varnishing is being removed? Have you noticed this yourself?
See-through case, fits like a glove - not loose. The best combination for me personally, the phone is still 100% visible but protected to some degree. Also I find soft silicone cases add more grip to what would otherwise be a slippery phone.
I-blason clear case from Amazon. Very happy with it.
Sent from my SM-T530NU using Tapatalk
I'm currently using the i-blason clear case as well, and I'll second it as good option. I had decent drop onto a hard surface over the weekend, and the phone was no worse for the wear. I also have the Casemate naked tough case coming as well, which should be even better. I'm someone that likes to have a variety of cases (although with this phone I'm probably going to stick with clear ones), so I will probably end up getting a bumper or two as well. I don't think the included bumper is quite as bad as a lot of people said it was, but it fits kind of loose and I can see it breaking with a good drop. As much as I enjoy going naked with the phone, I didn't get Moto care, and the wooden back I got is fairly slippery, and I don't trust myself not drop it occasionally.
I have noticed that the clear bumper that came with the phone has started to scratch the very edges of the rounded glass. I'm going naked now. I don't use screen protectors and generally don't use cases or bumpers. I've never had a problem with scratching my devices. I also never resell my phones (I usually gift them to family members, friends, etc.), so slight scratches aren't a deal breaker for me.
I love this phone in its bare form :good:
Related
http://www.clear-coat.com/product.php?productid=475&cat=0&page=1
im a bit skeptic about this product, have anyone tried previous products by clear coat?
Found a review of it here : http://www.intomobile.com/2008/06/23/clear-coat-full-body-scratch-protection-for-iphone.html
WDawn said:
Found a review of it here : http://www.intomobile.com/2008/06/23/clear-coat-full-body-scratch-protection-for-iphone.html
Click to expand...
Click to collapse
to be honest, when i cant find any other reviews... then suddenly theres a really positive review, that makes me really skeptical...
and yes, it is this EXACT same review makes me skeptical about this product lol
Sounds like
http://www.lowes.com/lowes/lkn?action=productDetail&productId=88113-74130-PFW486&lpage=none
That's the stuff I used in my bathroom to frost my windows... I got it wet and slid it on.. used a squeegee and flattened it all out and 3 years later is is still sticking there.
The difference is that this is
1.) Clear
2.) Cut into the proper shape (you could do this yourself with some measuring but it saves hassle)
3.) the squeegee is probably smaller.
My bathroom windows are in a VERY humid environment... I have never had ANY peeling.
However I don't keep my bathroom windows in my pocket... so I don't know if the corners will peel up.
My main point is that for $24 of this "film" to cover a TINY phone... you can buy the same thing for $18 that would cover 10 phones... if the product works fantastic... the profit margin for them is HUGE. If it doesn't work... it's the biggest rip off ever.
See if Gila makes a clear one... get $18 worth and tinker away.
http://forum.xda-developers.com/showthread.php?t=425314
So it's good or not ? Anyone use one of these ?
asolano895 said:
So it's good or not ? Anyone use one of these ?
Click to expand...
Click to collapse
I've seen them used on iPhones, hard to put on but once it's on, it stays.
Black93300ZX said:
I've seen them used on iPhones, hard to put on but once it's on, it stays.
Click to expand...
Click to collapse
Since you've had the Fuze already... Is the shape exactly the same as the TP? It looks like sprints version is a little more round along the corners. I'd Like to go ahead and purchase one of these for the Fuze but don't want to have to send it back.
venelar said:
Since you've had the Fuze already... Is the shape exactly the same as the TP? It looks like sprints version is a little more round along the corners. I'd Like to go ahead and purchase one of these for the Fuze but don't want to have to send it back.
Click to expand...
Click to collapse
The only difference I noticed when seeing the 2 up next to each other was the shape of the speaker hole on the back, that might be enough to throw the protection off. Ask Raspster about it more, he had both the European and the Fuze at the same time, so he could tell you better than I could.
I got one, just to try it out.
Exactly as described above. Its a bit fiddly getting on but once on, it sticks very well.
Its great at sticking to flat surfaces, not so good on curves. And they don't even try and cover the corners on the device, which I would think are the places I'd want protected if I was to drop it.
The texture makes the back look very different from normal; its much nicer without the cover on. On the front, you can't really see the cover at all; edges are perfectly aligned with the phones edges.
The back and the front of the phone are covered very well. Sides not so great. Corners not at all. Front looks good. Back looks crap.
My opinion, its no way worth $24
just got mine on Friday exactly as it's described, protects almost every part of the phone with their cut out plastic shield, however as mentioned in earlier post... doesn't really cover the edges, all in all... does really stick and so far looks pretty ok with the exception of little bubbles within the shield (poor application technique)
marcel808 said:
I got one, just to try it out.
Exactly as described above. Its a bit fiddly getting on but once on, it sticks very well.
Its great at sticking to flat surfaces, not so good on curves. And they don't even try and cover the corners on the device, which I would think are the places I'd want protected if I was to drop it.
The texture makes the back look very different from normal; its much nicer without the cover on. On the front, you can't really see the cover at all; edges are perfectly aligned with the phones edges.
The back and the front of the phone are covered very well. Sides not so great. Corners not at all. Front looks good. Back looks crap.
My opinion, its no way worth $24
Click to expand...
Click to collapse
Hi Marcel808,
Is it easy to peel it off without tearing the phone's original casing? Especially the back cover. I just ordered mine, hope it arrives soon.
Proghtc said:
http://forum.xda-developers.com/showthread.php?t=425314
Click to expand...
Click to collapse
I have used the Zagg's products (formerly Invisible Shield) on my 6800, 6700, wifes Centro and even custom ordered for my Pioneer 6800DVD in my car. I really like the product, the service is second to none... That said, I think since I have used the product and know how it performs in pockets, and how to install correctly (installed dozens of shields for myself, family and friends), I may try this new product.
Screen protection has always been great and flat surfaces (side) great as well but the corners usually give way, slide and start to bubble after about 4 months of heavy in and out of the pocket use.
This is a $24 experiment begging to happen.... now if Sprint would just release the damn phone!
I would also like to know this. Can it be removed again without leaving marks on the phone?
How scratch proof is it really?
Because of the lack of info on the site (still no video's on how to apply the thing, their forum is just about empty and they don't reply to customer questions...) they really don't seem to thrustworthy ...
DicE
serphinox said:
Hi Marcel808,
Is it easy to peel it off without tearing the phone's original casing? Especially the back cover. I just ordered mine, hope it arrives soon.
Click to expand...
Click to collapse
mrrogers1 said:
I have used the Zagg's products (formerly Invisible Shield) on my 6800, 6700, wifes Centro and even custom ordered for my Pioneer 6800DVD in my car. I really like the product, the service is second to none... That said, I think since I have used the product and know how it performs in pockets, and how to install correctly (installed dozens of shields for myself, family and friends), I may try this new product.
Screen protection has always been great and flat surfaces (side) great as well but the corners usually give way, slide and start to bubble after about 4 months of heavy in and out of the pocket use.
This is a $24 experiment begging to happen.... now if Sprint would just release the damn phone!
Click to expand...
Click to collapse
I would get the one released by Zagg. They offer a lifetime replacement on all products and they will replace it no questions I know. Their stuff is nearly impossible to scratch and I TRIED just about everything to scratch it. All phones full covers are $25. Never had any bubbling issues with Zagg's products.
yes it can easily be removed without any mark left at all....I found the cover started to collect dusk a lot (it must be slightly sticky) so I removed it.
Phantisy said:
I would get the one released by Zagg. They offer a lifetime replacement on all products and they will replace it no questions I know. Their stuff is nearly impossible to scratch and I TRIED just about everything to scratch it. All phones full covers are $25. Never had any bubbling issues with Zagg's products.
Click to expand...
Click to collapse
Trust me, I know oh too well the replacement process and have replaced and installed many over the last 5 years.
The fact that I know the Zagg product so well, makes the experiment more interesting. I know the Zagg stuff so well that I will know if this Clear Coat stands a chance AND since it's only $25... It might turn out to be junk, the company could not stand behind the guarantee BUT we'll see.
*Update
Just got my phone yesterday and I just ordered the Clear Coat. I'll install and do a little initial write up. I'll order the Zagg shield when it becomes available and do a comparison.
It's only money and it IS a $700 device.... (but I only paid $250 for it)
Stay tuned guys.
**Update
Just ordered a Zagg full body shield at 40% off as they just got them and were doing a Halloween special I guess. I should have the Cleat Coat on Mon/Tues and the Zagg will probably be here the week after. I think I'll install the Clear Coat first, use it for a week or so and then install the Zagg and do the same.
Can anyone who has purchased tell me if there is a cutout for the speaker on the front? Tah!
waaz1d said:
Can anyone who has purchased tell me if there is a cutout for the speaker on the front? Tah!
Click to expand...
Click to collapse
I don't have mine yet but why on earth would there NOT be a cutout for the earpiece???
I just bought online the invisibleSHIELD™ for my EVO (only the front cover).
Do you think guys it would be necessary to buy a rubber cover for the body?
Edit: i canceled my order and bought the full cover now, so i won't need the condom, lol
Nah. I don't think it really makes much of difference unless you're really worried about dropping it on hard surfaces. A rubber case will add a lot of bulk to a phone that's already pretty monstrous.
I will note, however, that my experience with InvisibleSHIELD's screen protectors have been less than stellar. It kinda gives the screen a grippy feeling. This makes it very hard to use pinch to zoom and stuff like that. Just my opinion...
ENJOY THE EVO!!
Depends on the person (oh by the way I'm sure their is already a thread about this, man your gonna get it) some people are clumsy and drop their $500 phones all the time. Me I take pretty good care of my device so I generally don't need one. With that said I have ordered a condom for this phone I got a silicon jelly whatever. Mainly because I was already ordering the screen protector and it wasn't a lot more to just drop that in the box.
zone23 said:
Depends on the person (oh by the way I'm sure their is already a thread about this, man your gonna get it) some people are clumsy and drop their $500 phones all the time. Me I take pretty good care of my device so I generally don't need one. With that said I have ordered a condom for this phone I got a silicon jelly whatever. Mainly because I was already ordering the screen protector and it wasn't a lot more to just drop that in the box.
Click to expand...
Click to collapse
A condom? lol
I may get one two, maybe a blue one.
I'm leaving mine totally naked. I may buy a screen protector, but I have yet to decide. Thankfully, HTC is a company that has realized the practicality of MATTE FINISHES. I cannot stand glossy, fingerprint and scratch magnet surfaces.
Hmm i hate having lil hairlines on the back of my device, due to laying it on a desk or so.
Im not scared of dropping it, but it depends on the grip of the device in my hands. if it feels like its going to slip out of my hand while im holding it. Then i might buy a silicone case like the one that came with the HTC HD2. if they have a case like that one.
hey question. all the iBoy's are running around with otterbox cases on their "phones" is the HTC HD2 the same form-factor as the evo?
cause there's always this option:
http://www.otterbox.com/htc-cases/htc-hd2-cases/htc-hd2-commuter-series-case-u.s./
which if it fits, i think i will be getting
SilverStone641 said:
hey question. all the iBoy's are running around with otterbox cases on their "phones" is the HTC HD2 the same form-factor as the evo?
cause there's always this option:
http://www.otterbox.com/htc-cases/htc-hd2-cases/htc-hd2-commuter-series-case-u.s./
which if it fits, i think i will be getting
Click to expand...
Click to collapse
You know the HD2 Duel flash is on the right. the Evos on the left. and i think the camera on the evo got a ring around it. so i dont think a HD2 case will work. far as camera.
YoungAceAtlanta said:
Hmm i hate having lil hairlines on the back of my device, due to laying it on a desk or so.
Click to expand...
Click to collapse
Kickstand. Bam!
mikevillarroel said:
A condom? lol
I may get one two, maybe a blue one.
Click to expand...
Click to collapse
Yeah, a condom. For "just-in-case accidents" ;D
If you're gonna get a case for such a massive touchscreen device, you really can't beat Otterbox. EVERY phone could benefit from an Otterbox case. As for screen protectors, just get a standard WriteRight package. They're wonderful things.
Seido option
I like this one by Seido:
http://www.seidioonline.com/category-s/4213.htm
I've never had one before.
Since the EVO is fairly large, Not sure how much more this would add to the large form factor.
Anyone had this:
http://www.seidioonline.com/product-p/csr3hev4-bk.htm
TIA...
I am getting the Innocase from Seido. The one without the belt clip attachment. Its only 1mm thick so thats not bad at all..
As far as those body skins. I would like to get one but they look like a major pain in the ass to put on and I wont have the patience for it cause it would have to be perfect.
Now if I could send it off somewhere to have professionally done then I would.
That otterbox looks pretty good. Substantial coverage with minimal "add-on" to the phone. Will consider that...see what they develop for the EVO (need kickstand hole, proper camera/LED/speakerphone holes). I'm just concerned about any additional add-on to the dimensions of the phone. It's huge as-is; doesn't need any more girth!
Also would be concerned about how much it makes it "stick" coming out of a pocket...
i just realized something about that otterbox i posted. the HD2 has physical buttons on the bottom, while the Evo has touch sensitive(if i remember correctly) so we would have to wait for an official Evo case. maybe coming soon?
I'm not too keen on cases, they add bulk to what are already big phones. My TP2 and the original TouchPro are thick with their qwerty keyboards.
I'm pretty careful with my phones, don't really have slippery hands. Only real accident I had with my TP2 is after about a week from purchase, I think I put my phone in the same pocket as my keys and out it came with a 1/4 inch scratch on the screen. I've been staring at it since.
Only accidents I ever really had with phones was with an old BB 7510. The belt clip was hard plastic, and it slipped out numerous times going up and down stairs. Pretty tough device though, the only thing that ever happened was the battery and cover would fly off...even after tumbling down cement staircases!
That's the one downside to new phones.
khov07 said:
they add bulk to what are already big phones
Click to expand...
Click to collapse
I have never been down with phone cases and screen protectors.
1. Similar to what the poster I quoted said, why would you want to make the device bigger than what it already is?
2. I think 99% of cases and screen protectors look stupid and nerdy. I usually think the phones I buy have visual appeal, and I don't know why anyone would want to cover it up. The EVO's exterior looks great.
3. I don't need to "baby" my phones. I don't really care if the screen gets scratched or if I drop the phone. I could give a ****. It it breaks or becomes that bad, I'll buy a new one.
The only reason I can agree with is when people want to have a case so they can belt clip the device or whatever. I like to carry phones in my pocket, but that's just me.
Totally agree with point number 2... IMO cases completely downgrade the look of a device; most are plain dorky. You can usually spot an iphone owner a mile away, as they typically have bedazzled/'gucci' (girls) or generic (guys) cases on them.
A lot of effort is put into the exterior design of these phones...why cover it up? Besides, I'd hate someone to confuse my EVO with a boring iphone that any joker can pickup for $97 at walmart, one aisle over from either diapers or anti-freeze.
This is the one i got today, let's see if its works...
http://www.zagg.com/invisibleshield/htc-evo-4g-cases-screen-protectors-covers-skins-shields.php
Right now my Evo is going bareback....
I'm waiting for my screen protector to come in, and will probably get an otterbox once they release it for the Evo.
Camp said:
I have never been down with phone cases and screen protectors.
1. Similar to what the poster I quoted said, why would you want to make the device bigger than what it already is?
2. I think 99% of cases and screen protectors look stupid and nerdy. I usually think the phones I buy have visual appeal, and I don't know why anyone would want to cover it up. The EVO's exterior looks great.
3. I don't need to "baby" my phones. I don't really care if the screen gets scratched or if I drop the phone. I could give a ****. It it breaks or becomes that bad, I'll buy a new one.
The only reason I can agree with is when people want to have a case so they can belt clip the device or whatever. I like to carry phones in my pocket, but that's just me.
Click to expand...
Click to collapse
I agree with the first two points, so I'm reluctant to get a case/screen protector. Unfortunately, I do care if my phone becomes scratched or if I drop it. I can't really afford to buy a new one!
I am looking for a clear TPU case, something akin to cruzerlite, only no textures, drawings, or anything on it. I really don't like the way matte feels in my hand, so I'd like it to be glossy. I had a cruzerlite for my galaxy nexus, but the back of the Nexus 4 is so pretty that I want a clear one Unfortunately either cruzerlite doesn't offer one, or it's not listed on amazon.
Even if they did, I don't think the clear ones have a fully transparent backing (rather it is frosted.)
I want this too! But so far the best I've found is a two piece hard case.
http://cellcasesusa.com/lg-nexus-4-e960-translucent-clear-hard-cover-case/
Whats wrong with this one?
http://www.amazon.com/Black-Google-Ringke-Fusion-Premium/dp/B00B7QGT6U
TheeWolf said:
Whats wrong with this one?
http://www.amazon.com/Black-Google-Ringke-Fusion-Premium/dp/B00B7QGT6U
Click to expand...
Click to collapse
Well, other than "In stock on February 20, 2013" absolutely nothing, I'm definitely gonna grab me one!
I've been looking for a tpu transparent case too, I've seen clear ones are with the s on the back,
the link above looks like the one to get, images doesn't help alot as they look photoshoped
you would of thought they make a clear one to begin with so you can show off the back while protecting the side
Hmm...the description is a tad bit vague. It indicates that it "snaps" on, but the soft cases don't "snap" so to speak. Just wondering if it has that gel feel to it, I don't like matte cases.
Rakeesh_j said:
Hmm...the description is a tad bit vague. It indicates that it "snaps" on, but the soft cases don't "snap" so to speak. Just wondering if it has that gel feel to it, I don't like matte cases.
Click to expand...
Click to collapse
The black is TPU
http://www.droid-life.com/2013/02/1...-case-clear-back-shows-your-sparkly-goodness/
The Ringke Fusion is a mix of TPU and PC – TPU is the black part for bumper-style protection, PC is the clear back. The TPU portion has what feels like a soft, almost matte finish and does not give off the rubbery feel like other TPU cases.
Click to expand...
Click to collapse
Hmm...I don't really like matte finish. Or at least, I like how the glass on the phone itself feels, or something equally smooth.
keep in mind, all transparent cases. be it silicon or tpu, colourize and end up in an awful dirty brown/yellow look within a few weeks. Thats a reason for me never to get a transparent case again, despite the cool looks.
Hmm...good point.
Just noticed this one:
http://www.amazon.com/gp/product/B00AJNM57O/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Since I liked the cruzerlite case for my gnex, I just ordered one. Seems clear enough, I guess. Saw one complaint of yellowing on clear ones for other phones, seems not all of them do this though.
For $13, I'm not going to complain much if it turns yellow after 6 months.
keep in mind because of the glass back of the phone that the tpu will touch and will create a "wet spot" look. I'll try to find a video of that issue later when I'm at a desktop computer
I wanted one too at first until I saw those marks. I think hard clear plastics are the best alternative
Just bought a nexus 4 after google's price cut, can someone recommend me a case that offer a good protection without compromising the N4's looks?
Currently I am considering the ringke fusion.
Any other recommendations?
FinancialWar said:
Just bought a nexus 4 after google's price cut, can someone recommend me a case that offer a good protection without compromising the N4's looks?
Currently I am considering the ringke fusion.
Any other recommendations?
Click to expand...
Click to collapse
I got the case you are considering but it has yet to arrive in the post which is annoying as i won't take my N4 outside without some sort of case.
Will let you know once i get it which should hopefully be later today or tomorrow.
There is no case that won't compromise its looks, simple as that. Even with the Ringke Fusion.. sure, you can see the back, but through plastic. And the rest is still TPU.. and in reality it doesn't look as flawless and nice as in the renders. There's always a compromise.
You could go for more minimalistic cases such as the quicksand ones. I'm currently using one of them and I really like its look and feel because it doesn't change it as much (I also have a diztronic tpu case which I'll only be using for when I expect rougher conditions, e.g. travel, hiking or whatever). But it comes at the cost of less protection for the device.
It's a matter of what you prioritize and what risks you're willing to take for better look and feel.
jpde said:
There is no case that won't compromise its looks, simple as that. Even with the Ringke Fusion.. sure, you can see the back, but through plastic. And the rest is still TPU.. and in reality it doesn't look as flawless and nice as in the renders. There's always a compromise.
You could go for more minimalistic cases such as the quicksand ones. I'm currently using one of them and I really like its look and feel because it doesn't change it as much (I also have a diztronic tpu case which I'll only be using for when I expect rougher conditions, e.g. travel, hiking or whatever). But it comes at the cost of less protection for the device.
It's a matter of what you prioritize and what risks you're willing to take for better look and feel.
Click to expand...
Click to collapse
Could you post a link to the one you are using?
Enviado desde mi Nexus 4 usando Tapatalk 4
http://www.fasttech.com/products/0/10001933/1138601-protective-pc-matte-case-for-lg-nexus-4
If you're concerned about shipping time, there should be lots of other places to buy them. http://forum.xda-developers.com/showthread.php?t=2030443 this is another thread on that kind of case.. I'd expect them all to be pretty much if not exactly the same
jpde said:
http://www.fasttech.com/products/0/10001933/1138601-protective-pc-matte-case-for-lg-nexus-4
If you're concerned about shipping time, there should be lots of other places to buy them. http://forum.xda-developers.com/showthread.php?t=2030443 this is another thread on that kind of case.. I'd expect them all to be pretty much if not exactly the same
Click to expand...
Click to collapse
that is one ugly cheap case...
It's certainly cheap, but I much prefer it to my diztronic tpu case (http://tpu-cases.com/index.php?main_page=product_info&cPath=46_76&products_id=303). The material feels very nice and not plastic-y (a bit like jeans, I'd say) and it hardly adds any bulk, which tpu cases do. I also really dislike the shiny border around the edge most tpu cases have, cause that does look pretty cheap.
I personally ordered it cause I was looking for a different case and this one seemed like a very low-risk option, and I ended up liking it a lot. Your mileage may vary, obviously.
FinancialWar said:
that is one ugly cheap case...
Click to expand...
Click to collapse
I had a similar type case on my nexus for a few months and it was great. Had a really great feel to it and it actually looks pretty darn sharp when it's on the phone. Doesn't look cheap at all. :good:
thanks, but I think I'll stick with the Ringke Fusion case. I like the clear back.
U can't go wrong with the oem bumper. It offers protection on all edges and prevents both front and back from laying directly on surfaces. I've had it on my white N4 since purchase and i don't have a scratch. Not to mention I am constantly subject to compliments and questions peeked by its sexy appearance.
Sent from my Nexus 4 using xda premium
I am always partial to the Ringke slim cases. I've had them on my last few phones
Sent from my Nexus 4
FinancialWar said:
thanks, but I think I'll stick with the Ringke Fusion case. I like the clear back.
Click to expand...
Click to collapse
I personally would go with bumper case and maybe add a screen protector on both sides (something like Ghost Armor or Zagg or dBrand skin if you want to go a bit more expensive, OR just get something like XtremeGuard for the back for a cheap alternative - XtremeGuard costs me about $2 for front and back :laugh: )
tardwes Marjolaine
For me and is what I use.
I reallu glad with bumper case from poetic.
Your phone keep with the original look protected, if you want a litle more prtection 2 skins one on the back and other on the front.
Box Wave Bamboo case! Only case I have kept on a phone longer than a week! Now going for two months.
Sent from my Nexus 4 using xda app-developers app
Ringke Slim or Poetic Pallete case.
Hands down two best slim cases. (My opinion lol)
mynigman said:
U can't go wrong with the oem bumper. It offers protection on all edges and prevents both front and back from laying directly on surfaces. I've had it on my white N4 since purchase and i don't have a scratch. Not to mention I am constantly subject to compliments and questions peeked by its sexy appearance.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Ditto. Unless you're extraordinarily clumsy, the OEM bumper should provide plenty of protection. I've had my Nexus 4 with bumper since December of last year and it has survived many drops. It's even survived a drop onto concrete, complete with a few bounces, with no scratch. The crack that my Nexus 4 has came from when I took the case off momentarily and then it dropped about a foot and a half onto the soft part of an open binder. >_<
OEM bumper + front and back clear skins. Everything else is hideous.
Currently using the Incipio Feather, but I have to admit that the N4 pretty much only looks good caseless.
Tried the official bumper, but it just didn't stick either.
phon00b said:
OEM bumper + front and back clear skins. Everything else is hideous.
Click to expand...
Click to collapse
Exactly. Coming from a person who has never liked or had cases on their devices - I just got the OEM bumper in the mail yesterday, and I'm stunned at how good it looks. It actually makes the phone look nicer with the aluminium accents, and protects it rather well.
What do you suggest?
Alright so I'm a little late to the Nexus 4 party, but after much delay, I finally decided to upgrade from my archaic Vibrant and order a shiny new N4. Although it hasn't come in just yet, I was interested to know what cases you guys might suggest. You see here's my dilemma... I know for a fact that the Ringke Slim and other like cases are a major no-no for me. They offer too little protection and from what I've heard, leave the very top and bottom of the device exposed. I would get the OEM bumper as it's very attractive, but I've read many, many, many reviews that note its fragility--specifically around the USB port, which apparently is prone to cracking. I'm also considering the Ringke Fusion as it seems to be a popular choice, or the possibility of going with a wallet style case, as I won't need a screen protector then.
However I'm very torn, as there are so many options and so many drawbacks...
What do you guys think? Is the OEM bumper really all that fragile? Does it break as a result of removing the phone from it or does it crack completely on its own? Should I not even consider the OEM bumper case and go with something much more durable (i.e. the Ringke Fusion, wallet case)? Should I just go naked!?!? (referring to the phone of course )
Thanks in advance! Looking forward to hearing some feedback!
Simply put-
How many turbo users prefer no case?
How many turbo users need protection?
I want to get an idea of how many people are confident with the build quality of this phone, i want to know the averages for preference of our turbo users, and i want it simply put in yes or no on the poll.
ccheww said:
Simply put-
How many turbo users prefer no case?
How many turbo users need protection?
I want to get an idea of how many people are confident with the build quality of this phone, i want to know the averages for preference of our turbo users, and i want it simply put in yes or no on the poll, which im not sure is posted correctly.
Click to expand...
Click to collapse
No case. No need.
Naked all the way.
Sent from my XT1254
I find myself going back and forth. Putting the case on when I go outdoors, leaving it off indoors. I wish I had th balls to keep the case off. Someone motivate me.
Case at work...naked everywhere else
No case ever
Sent from my XT1254 using XDA Free mobile app
Yeah same. Phone is great without case. The trouble with the cases is that most of them don't seem to fit very well. I have the 64 gb version. Tried the moto flip case. It was so tight I almost had to rip the case in half to get it back out. Otterboxes for this phone are junk. The only good fitting case I've found is the incipio dual pro. I keep it off at home and on at work.
esmccarty said:
Yeah same. Phone is great without case. The trouble with the cases is that most of them don't seem to fit very well. I have the 64 gb version. Tried the moto flip case. It was so tight I almost had to rip the case in half to get it back out. Otterboxes for this phone are junk. The only good fitting case I've found is the incipio dual pro. I keep it off at home and on at work.
Click to expand...
Click to collapse
I have an otterbox commuter for my 64gb bn and it fits perfectly. Not too tight and has already saved my phone from 9 separate drops. I definitely wouldn't call it junk. Sure a bit bulky. But that's the price you pay for a tough case.
rglebien said:
I have an otterbox commuter for my 64gb bn and it fits perfectly. Not too tight and has already saved my phone from 9 separate drops. I definitely wouldn't call it junk. Sure a bit bulky. But that's the price you pay for a tough case.
Click to expand...
Click to collapse
The defender was definitely junk. I had to return mine. The way they cut the screen protector out is horrible. It makes it so you have to swipe down two or three times from the notification bar. I tried the commuter but then I remembered that every single one I've gotten in the past has cracked and fallen apart when I didn't even drop it.
I use a case only to hold the metal piece so that it connects to my magnetic car mount. Aside from that this phone is naked.
No need to case it! It isn't a samsung phone!
I use a case at work. I work in a shop so there's grease, weld spatter, grinding dust etc. I brought the phone in ONE DAY and it slipped out of my hand and bounced off a metal welding table. Never again. I have the otter box commuter and I like it. Its a little bulky but still fits in my back pocket just fine. If I didn't work in such a messy and hazardous workplace I would never have a case on this sexy phone.
Naked at home, sarcophagus when out
Otterbox Defender. I am pretty rough on phones. Wouldn't last a week without it.
Sent from my Nexus 10 using XDA Free mobile app
No case. I'm in construction. And even when I'm carful my phone can take a beating. My g2 was all scratched up in the first week. This beast still looks brand new! Very impressed
Screen is covered by motorola if it breaks. No need for a case if you ask me.
Naked all the way
I prefer no case, but I prefer more a phone that doesn't have a cracked screen or broken internals
I go caseless. I just like the way the ballistic nylon feels in my hands. I'm waiting for the new Tudia case for the BN version to use for when I go out running. That's really the only time I feel like I need one.
This is the first phone I've had in years (since pre-android days) on which I have not put a cover. I've seen people's comments about the Turbo being ugly, but the ballistic nylon is the first phone for me where I am both confident enough in the general build and impressed enough with the looks that I cannot bear to hide it behind a case.