Hi,
I updated to Malaysk rom for August with success. Everything works fine.
Now I want to update to the newer version from September.
I copied the update.img into root of GPS as allways, but nothing happens.
Did a reboot, but still nothing happens.
Any idea?
Try entering in recovery mode
Related
Hi all
I have just got my Vega and I have been attempting to master the nvflash technique but with no success.
Everytime I attempt it the screen lights, the android appears and then the unit goes off and there is no indication of any connection between my PC and the Vega.
Anyway I was checking my firmware version and it appears to be V1.11
2.6.32.9_P10_V1.11_20110627_DIX
Has anyone get any experience of this firmware as I cannot seem to find it mentioned anywhere and I am wondering if Dixons have locked the nvflash?
Thanks for you help ahead of time
Oh I think I should mention I have managed to install Clockworkmod V3.0.24 but not yet rooted the device and I was wanting to install modeed stock v2
Thanks again
Oops this doesn't look good, I know this thing is supposed to unbrickable and I do have a nandroid copy of the firmware on the SD card
But I have just shut the unit down to reboot it and it will not come on now.
All that happens is the screen lights up and nothing else.
I have tried shutting it back down and booting again, I have tried the nvflash sequence again but nothing, just a backlit screen and nothing else.
Also whilst the power is plugged in the unit will not even attempt to come on when trying nvflash, I should have mentioned that before as that has always been the case.
All I have done today is install the getjar app, facebook, angry birds and moved the Clean & Stable Add-On For All Stock Firmware V4 mod to the software update folder but not actually flashed it.
I have even taken the SD card out and tried booting up but still the same result.
Any ideas anyone please?
OK that seems nuts but the thing has finally gone into recovery mode just as I had all but given up, I have now updated it with modded stock v2 and vegacomb and just waiting to see if it is now sorted.
It came on and went through all the vegacomb animations but now it appears to be a blank backlit screen again
put original stock firmware back on it, you may fine only v 1.10 on the internet, so give that a try.
Thanks for the reply mate
I have managed to do exactly what you suggested and nvflashed the original Vega1.10 and have since updated with modded stock V2 and then updated to Vegacomb and all seems great except for the odd crash but they are fairly far and between
I originally had OOS3.0.2, and I tried to get Beanstalk rom installed. Beanstalk didn't load correctly, and I softbricked my phone. I managed to go through the recovery of downloading the qualcomm drivers and that weird updating program and then sideload an older version of OOS (2.2). I went to this link and did method 1 https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/. But when I get things fixed up, I can't seem to update to CM13, or even to do a normal update with root, without root, with twrp, without twrp. Nothing. Strangely enough, no matter what I've been doing, the data I had from the very original pre-screw-up time is still all there. Every time I try an update it hangs on the 1+ screen and stays there. How can I get past this? I can't seem to upgrade, and I'm stuck in lollipop.
Well I was still able to get into my phone and do a stock recovery from the Update and Restore option from the phones settings menu, so that fixed it.
i tried to to sideload a 700m some zip file to fix the prob, it doesn't work on my 6p cause the version is moved to mtc20L, i need help!
What rom are you running on?
You'll find everything you need in this thread : http://forum.xda-developers.com/nexus-6p/general/index-huawei-nexus-6p-t3213583
oussamalabbize said:
What rom are you running on?
You'll find everything you need in this thread : http://forum.xda-developers.com/nexus-6p/general/index-huawei-nexus-6p-t3213583
Click to expand...
Click to collapse
thanks for reply. my 6p is running 6.0.1 (MTC20L) before it couldn't start up. now i do the recovery steps ,i can see the version is the same. i tried everything except the factory image cause i didn't get phone unlocked.
about three days ago, i turned off my 6p ,when i restarted it , it just stuck on the google logo and then restart and stuck on the google logo again and again.
i did nothing wrong before, even i hadn't got the 7.0 official ota update, i only got a 27M updating package of september which was described as a preparation update for the update of 7.0
my device is locked both oem and the bootloader, so i can only do the reset to factory mode, clear data and cache, no use. i tried to adb sideload the recent google OTAs including MTC20L ,7.0.0 (NRD90T) 7.0.0 (NRD90U), no use. before the brick occured, i got my device ota mtc20l. now i can do nothing but wait for more help fromanyone and hoping google may give a cure.
I just got an OTA update and from VNS-L21C432B160 to B370 which was around 1.94GB but I wanted to make a clean install so I removed superSu from the app did a factory reset first then went back to update where it now showed something around 1.24GB. So I went through with the update everything seemed fine until I couldn't find the Dual-Sim manager. I went to About Phone section and noticed that my build number was NRD90M test-keys. How can I get a clean C432B370 from this point on?
Same thing hapened to me.
After update, strange build, but no BT functionality and no file explorer. Contacted Support, told to do Factory reset. Now gets interesting.
Factory reset failed after 6%, now im stuck with device with no keyboard?!? Basicaly, i can just recieve call's.
And to top it up, PC dont see device, cant upload anything on SD card to try 3 button update etc.
Before I have downgraded from N to MM because of camera problem, to do so, I had flashed Dual Sim OEM per instructions, I can think that that is causing some problems.
Targyen said:
Same thing hapened to me.
After update, strange build, but no BT functionality and no file explorer. Contacted Support, told to do Factory reset. Now gets interesting.
Factory reset failed after 6%, now im stuck with device with no keyboard?!? Basicaly, i can just recieve call's.
And to top it up, PC dont see device, cant upload anything on SD card to try 3 button update etc.
Before I have downgraded from N to MM because of camera problem, to do so, I had flashed Dual Sim OEM per instructions, I can think that that is causing some problems.
Click to expand...
Click to collapse
Same thing happens to me with factory reset, fails at 6% boots back like it performed a factory reset. I'm greeted with the first time welcome screen. No keyboard no file explorer no updater. I managed to dictate apkmirror on chrome and downloaded gboard and esfile manager. And I lost my SD card to perform a 3 button method. Can I do the 3 button without an sdcard? Maybe using the internal storage?
EDIT: Well I did the 3 button method and failed at verification. Anyone can help me how do I get out of this?
EDIT 2: Back to MM with this tut https://forum.xda-developers.com/huawei-p9lite/how-to/tutorial-rollback-n-to-mm-c432-devices-t3563955 and downloading B370 thorugh the official updater again
EDIT 3: Everything went smoothly and after, I even got B380 OTA.
EDIT 3.5: Did a factory reset after B380 and everything is working.
So basically, few months ago i tried to root the phone, get new recovery and different rom. If I remember correctly I got stuck trying to get custom recovery to work, because everytime I restarted phone it would be replaced by the stock one. So I left the phone as it was, and disabled the TWRP app on it. Problem was, I could not update phone. Today I tried to completely revert to stock.
I flashed stock recovery but when I tried to install update from the phone storage, it did not even give me option to select a file.
I tried to update the recovery to newer one which gave me the option to select a file, but the installation got canceled after few seconds, putting me back on the file selection screen in recovery.
I tried to instal TWRP but I can't even boot into it at all because the phone is just stuck with blackscreen and lightblue led light.
I tried to ADB sideload the newest stock rom that I downloaded from OP5 site but this one went to around 50% and then crashed as well.
I also tried to do the update using the Settings>System update > Local Upgrade but this one also fails once it gets into recovery.
I tried wiping cache/reset system settings or wiping every data on the phone before any update but none of it seems to help and everytime I restart the phone afterwards the TWRP app is still there needing an update.
I tried to just lock the bootloader but I got the "Your device is corrupt. It can't be trusted and will not boot" message followed by link to google support. I assume that is because of the TWRP app that is on the phone but I can't get rid of it no matter what I try. I tried searching for people having simillar problems but I couldn't find anything that would help me.
Any suggestions?
Thanks in advance.
You can go with the last resort and use the Unbrick tool.
https://forum.xda-developers.com/oneplus-5/how-to/guide-unbrick-guide-hard-bricked-t3761706