Database Users

Rooting my Pumpkin Android rckPX2 4.4.4

Hi, fellows
I have tried to root my head unit using: KingRoot, TowelRoot, Root Master etc and every single one failed. It is something that I am doing wrong? or it is not possible.
Please help!

Aparently, not possible...

What is a "Pumpkin Android rckPX2 4.4.4?" Searching for rckPX2 on the Pumpkin website turns up nothing.

My unit is this one on their website LM-C0676-US-A GeneralS: Android 4.4 Kit KatCPU: Rockchip PX2 Cortex A9 Dual Core 1.4GHzRAM: DDR3 1GBNand Memory: 8GBAudio output: 4*45W maxScreen Resolution: 800*480 Cold Boot time: about 25-30s - See more at: http://www.autopumpkin.com/car-dvd-...-control-for-toyota.html#sthash.FlVuWSf2.dpuf

Mike the Rockchip 3066 and the Rockchip PX3 seems to be the same processor just that the 3066 is used only in consumer products and the PX2 is used for consumer products and industrial applications.
I did post the link to both processors PDF to see if somebody can compare them and determine if I can use the Malaysk room with my unit.
Thanks for your help!

Sorry is PX2 not PX3.

The first 2 characters of Pumpkin model numbers indicate the OEM. I don't know who "LM" is, but it's not one of the known manufacturers of HuiFei type units. So, Malaysk's firmware is very unlikely to work.

mike.s said:
The first 2 characters of Pumpkin model numbers indicate the OEM. I don't know who "LM" is, but it's not one of the known manufacturers of HuiFei type units. So, Malaysk's firmware is very unlikely to work.
Click to expand...
Click to collapse
Mike I was told by Pumpkin that my unit is made by Senzchen Winmark Electronics Ltd in China. I went to their website and they sell my unit under a different part number DQ6514

mike.s said:
The first 2 characters of Pumpkin model numbers indicate the OEM.
Click to expand...
Click to collapse
Do you know were I can find more info about that? I'm really with itches to flash Malaysk's firmware in my AL-C0241 or AL-5701 (they are the same unit) and I really would love to have the original firmware to put back if something goes wrong...

Unfortunately I have not being able to find a workaround solution yet. I want to flash Malaysk rom like you but I do not want to brick the unit so I keep looking and asking for help. I have read and being told the following:
a) You need to be rooted to be able to backup your original rom.
b) You cannot go back to 4.2 either.
So the only solution is to find someone that can look in my case to both processors the rk3066 and rkpx2 and respond yes they are the same go ahead and do it.

Georgetech said:
Unfortunately I have not being able to find a workaround solution yet. I want to flash Malaysk rom like you but I do not want to brick the unit so I keep looking and asking for help. I have read and being told the following:
a) You need to be rooted to be able to backup your original rom.
b) You cannot go back to 4.2 either.
So the only solution is to find someone that can look in my case to both processors the rk3066 and rkpx2 and respond yes they are the same go ahead and do it.
Click to expand...
Click to collapse
How I understand you! But in my case I have the same CPU and display

nleitao said:
Do you know were I can find more info about that? I'm really with itches to flash Malaysk's firmware in my AL-C0241 or AL-5701 (they are the same unit) and I really would love to have the original firmware to put back if something goes wrong...
Click to expand...
Click to collapse
I just checked your unit in Pumpkin website and it has the rk3188 processor. Malaysk rom is for the rk3188 and 3066. If the only requirement to flash this rom is just about the processor then you should be fine but I do not know this, maybe somebody else in this forum could help with answers.

Georgetech said:
If the only requirement to flash this rom is just about the processor then you should be fine but I do not know this, maybe somebody else in this forum could help with answers.
Click to expand...
Click to collapse
I believe it's not the only but it's the most important. Come on guys, enlight the nooblets here!!! :angel:

Malaysk's firmware is meant for HuiFei type units. It is not known to work with others, even if they happen to use the same processor.
For instance, the Winlink/Ownice units (they have their own thread) will not work with Malaysk's firmware, even though some use the RK3188 and have the same resolution as some HuiFei type units.

thanks for your input Mike! this is the input that was missing.
that means I MUST put my fingers on my original firmware before try a rooted image.
Thanks again
Nuno

mike.s said:
Malaysk's firmware is meant for HuiFei type units. It is not known to work with others, even if they happen to use the same processor.
For instance, the Winlink/Ownice units (they have their own thread) will not work with Malaysk's firmware, even though some use the RK3188 and have the same resolution as some HuiFei type units.
Click to expand...
Click to collapse
Thanks Mike!
That closes this chapter. Next option is to learn how to code.
Thanks
Georgetech

Some posts moved to new thread:
http://forum.xda-developers.com/android-auto/android-head-units/al-c0241-al-5701-t3229364

My 2 cents
I would just try to install the rk3066 version of the ROM and see if it works. I don't think you will have a problem, it should work.
I accidentally was trying to install the wrong one on my radio and it just didn't install didn't mess anything up.
Unzip the Rom and put it on a SD card with nothing else on it.
Put the SD card into the GPS sd card slot while the headunit is on and it will pop up a box saying it found a update or something and
just reboot the until and it should start installing it.
Well at least this worked on mine. Just do it you don't need the old ROM. Hope this helps

Hi all, I've a similiar car unit, same CPU, same screen resolution, I've found a link to sownload an original rom:
http://www.autopumpkin.com/pumpkin-...i-odb2-steering-wheel-control-for-toyota.html
and here direct link:
https://mega.nz/#F!UE9ElapD!A-uTerI11qQ86r2ModVnyg
inside there are both firmware and mcu, but I didn't find something to dump it to explore system files, from images seem to be better than MCU I have mounted on mine (specific Fiat Punto Evo car unit), I cannot Root it, cannot install CWM (bad update.zip message!), please, there is someone that can suggest me with (if there are) utility to use to dump it? it will be interesting also to investigate about it, to try to find some easy ways to root kk 4.4.4 rockchip px2 devices.
Thanks in advances.
here some sources: (JB)
http://www.marsboard.com/marsboard_rk3066_download.html

I rooted mine very easy with couple key presses. There is a youtube video of it, takes 30 seconds

Xtrons tda696a

Hi all,
Ive got an xtrons tda696 with android 4.4.4_22072015
I have root access but wanted to check if there is any firmware or roms I can use.
chip is the rk3188 and mcu is MTCB-HZC-V2.69
Ive looked at all the roms and firmware here but the mcu doesn't appear to be listed.
Any help or suggestions please

compbuilds said:
Hi all,
Ive got an xtrons tda696 with android 4.4.4_22072015
I have root access but wanted to check if there is any firmware or roms I can use.
chip is the rk3188 and mcu is MTCB-HZC-V2.69
Ive looked at all the roms and firmware here but the mcu doesn't appear to be listed.
Any help or suggestions please
Click to expand...
Click to collapse
hello, I have your stereo itself, how did you get the root ??
Inviato dal mio D6503 utilizzando Tapatalk

compbuilds said:
Hi all,
Ive got an xtrons tda696 with android 4.4.4_22072015
I have root access but wanted to check if there is any firmware or roms I can use.
chip is the rk3188 and mcu is MTCB-HZC-V2.69
Ive looked at all the roms and firmware here but the mcu doesn't appear to be listed.
Any help or suggestions please
Click to expand...
Click to collapse
I just installed this, http://forum.xda-developers.com/showpost.php?p=60591423&postcount=12068 and it all works beautifully !! does not change the MCU !!

skizzo_d said:
I just installed this, http://forum.xda-developers.com/showpost.php?p=60591423&postcount=12068 and it all works beautifully !! does not change the MCU !!
Click to expand...
Click to collapse
Hi Glad you managed to get it sorted out.
For root I used the a password which I found on here,but after looking for it again I cant find the thread.
Root gave me the abd shell and then I installed super user.
Reboot and installed root checker to confirm.
Pleased you managed to flash yours but which ver from the link did you use
Did you use the one for 800x480 or can you give the link directly to the download.
I just want to make sure that I install the correct one with no mistakes
Are these the download that you used dated sept 2015??
Download 800X480 with NEXT Launcher: https://yadi.sk/d/AAqeafAvixzHp
Download 800X480 with regular launcher: https://yadi.sk/d/UFXsA6pLixBoq
Thanks

compbuilds said:
Hi all,
Ive got an xtrons tda696 with android 4.4.4_22072015
I have root access but wanted to check if there is any firmware or roms I can use.
chip is the rk3188 and mcu is MTCB-HZC-V2.69
Ive looked at all the roms and firmware here but the mcu doesn't appear to be listed.
Any help or suggestions please
Click to expand...
Click to collapse
compbuilds said:
Hi Glad you managed to get it sorted out.
For root I used the a password which I found on here,but after looking for it again I cant find the thread.
Root gave me the abd shell and then I installed super user.
Reboot and installed root checker to confirm.
Pleased you managed to flash yours but which ver from the link did you use
Did you use the one for 800x480 or can you give the link directly to the download.
I just want to make sure that I install the correct one with no mistakes
Are these the download that you used dated sept 2015??
Download 800X480 with NEXT Launcher: https://yadi.sk/d/AAqeafAvixzHp
Download 800X480 with regular launcher: https://yadi.sk/d/UFXsA6pLixBoq
Thanks
Click to expand...
Click to collapse
yes, 800x480, extract the file "update.iso" and put it in sd_GPS and in settings / system information, updates. after upgrading to Android, restore factory settings and erases data

skizzo_d said:
yes, 800x480, extract the file "update.iso" and put it in sd_GPS and in settings / system information, updates. after upgrading to Android, restore factory settings and erases data
Click to expand...
Click to collapse
Have you found any issue's or problems with the firmware as we seem to be the only users who have this unit.
Also what did you use to make a backup
Thanks for your help

All installed and up and running thanks
But have a problem Lost my 16gig nandflash though.
Any help on this one please

compbuilds said:
All installed and up and running thanks
But have a problem Lost my 16gig nandflash though.
Any help on this one please
Click to expand...
Click to collapse
what does it mean? you lost files? or memory is smaller? or do not see it right ?? did you do the factory reset ??
Inviato dal mio D6503 utilizzando Tapatalk

skizzo_d said:
what does it mean? you lost files? or memory is smaller? or do not see it right ?? did you do the factory reset ??
Inviato dal mio D6503 utilizzando Tapatalk
Click to expand...
Click to collapse
Hi again.
flash memory had increased form 1 to 2 gig as expected but the memory in the unit is 16gig was no longer showing or accessible.
Also yes after flash I did factory reset.
So what I have done now is reflash the unit again but used the rom with next launcher built in and then factory reset.
Full memory is now visible and usable.
I have noticed that my obd software will not find the blooth elm even though it is paired, I will have a play around with today to see if I can find the problem.
Also did you make a note of your units factory settings?? Maybe that could be the Bluetooth issue with obd.
Thanks again and I'm glad somebody else has the same unit as me so now I don't feel alone

https://drive.google.com/folder/d/0B1BfJCD_1o9Gd2VNYzdVVHhiWnc/edit

skizzo_d said:
https://drive.google.com/folder/d/0B1BfJCD_1o9Gd2VNYzdVVHhiWnc/edit
Click to expand...
Click to collapse
Many thanks
I took pictures myself of all other settings but forgot about the factory settings.
Because it seems we are the only two that has the unit so far what do you think about it.
I changed from a pioneer appradio to have this instead.
So far I don't regret the choice

I feel too late to find this thread but...
Don't flash Malaysk ROM on Xtrons HU with MTCB-HZC.
Obviously they have fatal issue at screen backlight.
I confirmed same issue on TD696A and TD101A both of them.

Dear Users,
I have an Xtrons TD696A MTCB-HZC-v2.65 with current buildnumber rk3188-eng.4.4.4 22102015.20.28.27.
I'd like to install the Malaysk image on my unit but before I do this I would like to know a few things:
1). First I have to get root access on my device and install the application SuperSU (I have managed to do this)
2). After that I have to create a back-up but which application is the best to do this?
I have tried nandroid but it gives me an error 127.
Changing the shell did not make any difference.
Do I have to install busy box for this?
I have also red that making a back-up of a device is normaly done by booting the device with a rom manager.
But which rom manager could I youse for my Xtrons unit?
3). Could I install update_4_4_4_FUSE_800X480_RK3188_15_MAL_23_04_2016.rar on this unit?
After expanding the rar file I have red the readme file but I'm not sure which method is the best method to choose:
* Installing from the system
* Installing from Recovery
4). Are there any other steps that I have to make or have to know or do before I'm going to flash my unit?
Please help me so I could use the incredible Malaysk rom.
Kind regards,
Kenneth de Vries

KR-6206 Kaier

Hello Guys
I need some help in flashing my device. I was going to try and flash my head unit today and tried a few things and now i cant even run the restore factory defaults. Well it runs and runs and runs and tells me not to restart the head unit but nothing happens so i switch off and on and its still good. In short i broke it.
The unit switches on and loads up fine but the wifi is all messed up i have to specify ip address to get anything to work.
My aim here is to flash to kitkat if not possible then back to factory. I managed to find this web site with firmware for my radio apparently. I cant find any instructions on how to do the update or do any kind of serial number matching or any kind of identification to avoid flashing wrong. I cannot post the link If you google kr-6206 Firmware its the first link and its by a website firmware-portal. I have registered to there site but cant find any kind of help or contact us. Even tho they say to contact them.
Radio details :
Android 4.2.2
MCU: 4.3.8-11-10-450101 WV(4.3.8, RDS, AD, BC6, Rohm37XXX, TEF662X)
System Version: 2.7.39
1.5GHZ Dual Core Cortex: A9
Ram 1GB DD3
8GB
Car DVD
GPS
TFT LCD 800*480 Screen
For SUBARU FORESTER Impreza 08-10
Bought on ebay in 2014
I realize this question must have been asked but not for this radio. If there is a good guide someone can recommend and also if someone can tell me if i can use the files i downloaded to try restore my radio to a proper working radio. Its really frustrating. I dont wanna brick the radio
Thank you for any help in advance

it think it's a unit based on http://4pda.ru/forum/index.php?showtopic=707069
see this thread on XDA
Think u can update to 5.3.17 MCU and Try the Navi IQ firmware it's pretty good

D3LTA said:
it think it's a unit based on http://4pda.ru/forum/index.php?showtopic=707069
see this thread on XDA
Think u can update to 5.3.17 MCU and Try the Navi IQ firmware it's pretty good
Click to expand...
Click to collapse
Thank you so much the king root managed to root my device. The only thing is none of those radios look just like mine. One very similar but not 100%.
The supplier from eBay sent me the software files but it dose not update android. Still stuck on 4.2.2. Im afraid to update. I need to figure out how to make a backup first before trying.
All and all the radio works now but no audio from the on board amp im guessing the power IC is fried.
Will keep you guys posted and thank you for the help

D3LTA said:
it think it's a unit based on http://4pda.ru/forum/index.php?showtopic=707069
see this thread on XDA
Think u can update to 5.3.17 MCU and Try the Navi IQ firmware it's pretty good
Click to expand...
Click to collapse
So the Agent sent me this. V2.9.5_20150513_800X480_SYSTEM_KED.rar. Its only 174.91M and contains 2 files. It did not update Android to higher version just the system version should i use the Version (2.9.1 800x480 - Most likely default software taken from AN-21U
@mxv68 - V2.9.1_20141217_800X480_SYSTEM_KED.rar) From the XDA forum will that work. Sorry to be so noob at this. First android device .
They have really not made this uncomplicated.

Try to use the navi IQ software from the 4pda forum, it's a hybrid rom.. it updates just Android so if it doesn't boot I can always go back if u have the old files.. with Phoenix suit u can make a backup.. but I didn't try it.

D3LTA said:
Try to use the navi IQ software from the 4pda forum, it's a hybrid rom.. it updates just Android so if it doesn't boot I can always go back if u have the old files.. with Phoenix suit u can make a backup.. but I didn't try it.
Click to expand...
Click to collapse
Thank you
I will only be able to check this out in a weeks time. I am going to be away. Will let you know as soon as im able to test.

A-Sure S3 - 5.1.1 Intel head unit KYD - How to root and rom update.

After a lot of time trying to find out more about this unit, I thought I would create a thread and start it off with what I now know.
The unit is similar to the Joying unit, it uses the Intel processor and is non mcd. The manufacture is Kaiyide (KYD) the rom is again similar to the joying but not quite the same.
Passwords are 3368 for the main car settings and 0808 to change launcher. There is a password for something to do with the door locking, which I dont know.
Root is achieved the same way as the joying using the method posted by MMTK84 https://forum.xda-developers.com/showpost.php?p=69648860&postcount=84&nocache=1&z=8361786322568856
The latest rom is available using the link below, extract the folders and load content into root on on a usb stick put it into the unit and it will auto detect and update.
https://mail.qq.com/cgi-bin/ftnExs_...18440714350f&t=exs_ftn_download&code=0c66ff52
When i installed the rom, I used the apps and boot animation from the latest Joying rom download both have installed correctly. Im unable to load the mcu update as it searches the manufactures info and as its not JY it wont update. If anyone can help with this I would like to try it as the MCU software is a lot older than the Joying. Can this be achieved by editing the build.prop file?
Please add to this thread and edit as necessary. I hope this helps A-Sure unit owners as the information is very difficult to find.

Hi,
Thanks for this post.
can i manuelly flashen? the auto flash not work by me.
i have extract the package and copy on the usb stck(fat32)
abload.de/img/img_20170407_143842g1u2p.jpg
thanks
Ps:sorry for my bad english

New user
Hi Rick,
I'm interested in making this thread too, there seems to be no resources for this unit whatsoever.
Have just purchased an A-sure unit, ball ache trying to figure it all out without a manual. Although, A-Sure have now sent me one.
Have updated the ROM with your help, looks quite a bit different now.
I'm not a developer, more of a meddler, am too old now to take it in like I once did.
Cheers for now,
Alan.

Hi Alan, thank you for adding to the thread! You are quite right there is almost no information available for the A-Sure unit. Fortunately the information can be put together from various threads here on the XDA forum. But having it in one place makes sense.
I know exactly where you are coming from and I am the same more meddler than developer and also a lot older than when i used to install car audio and security for a profession. Im pleased that you found my info useful.
I would very much like to modify the DAB app so that it shows the station logos - or use another one if anyone knows an app that will work.
I have updated the iGO app on my unit - ugh took me a while to get it working. for that you need root access.
Most of the issues are now cured on my unit, I just have a problem with loosing gps when going between apps ie from iGo to poweramp and back (music player - way way better then stock app)
Best regards
Rick.

extract the package then open the first folder / second until you see a group of files, put those onto the fat32 usb stick and then try to update
ichhalt88 said:
Hi,
Thanks for this post.
can i manuelly flashen? the auto flash not work by me.
i have extract the package and copy on the usb stck(fat32)
abload.de/img/img_20170407_143842g1u2p.jpg
thanks
Ps:sorry for my bad english
Click to expand...
Click to collapse

Hi Rick, I also have a S3 unit of A-Sure (Intel sofia, 1GB, 16GB, WiFi Version). It looks like that A-sure offers currently no updates. I wrote 12 emails with no satisfactory answer to my questions. The system of A-Sure is very bad translated in German and contains many software problems. I would also like to update my system, as you have done it. Unfortunately the download link is offline. Can you put it online again? I have the S3 unit with the physical buttons. This information is based in the MCU, isn´t it? The android System is the same one? Can I set the Android system in German?
Thank you very much.

Rom Offline?
Cant download the File

YorkshireGrilla said:
Hi Rick,
I'm interested in making this thread too, there seems to be no resources for this unit whatsoever.
Have just purchased an A-sure unit, ball ache trying to figure it all out without a manual. Although, A-Sure have now sent me one.
Have updated the ROM with your help, looks quite a bit different now.
I'm not a developer, more of a meddler, am too old now to take it in like I once did.
Cheers for now,
Alan.
Click to expand...
Click to collapse
Pls upload the Firmware. Original link Down

WTF, no answer

Because no one answer here, I tried to update the ROM on myself. I have downloaded the ROM of Joying 20170328 and unpacked. I Have deleted the directory MCU, and the files 0308 STM8UD.BIN and STM8_PROJECT cov.s19 (I read that must be the original of A-Sure). I copy the files on a SD card and put it into the GPS slot. Unit is switched on and the update has started. After 10 minutes, on the screen was: Please remove SD card. I have done it. Nothing happens. Reset. Unit rebooted and has Android further installed. Then black screen. Reset again. Android starts, everything seems to work . In the info bar is in bold red font: MCU and UI do not fit together. Looks stupid ... But ok.
The physical keys work, only the DVD drive does not work. Apparently no driver in the Android system available. TOMTOM can not be installed (here you have to root the device and change the serial number). The translation of Chinese in German is clearly better than in A-Sure, in the radio app the RDS text is also no longer overlapping. More I have not tested yet, I'm glad that I have not shot the device.
I Think, i´m waiting for the offical update of A-Sure (if there will be one, I don´t think so...)
Yes, these were my first experiences.
Whether I would recommend it, I do not know.
Many advantages I have not recognized so far ...

Good news from A-Sure. They have a new firmware, directly to Android 6. No problems with updating, even TOMTOM works without routing and changing the ID...

Good news, thank you.
I have a problem with german text to speech in google navigation.
I tryed also the update to joying, but wifi didn't work.
Is there a download link for the update available?
Grettings from Hannover.

holzwuermchen76 said:
Good news from A-Sure. They have a new firmware, directly to Android 6. No problems with updating, even TOMTOM works without routing and changing the ID...
Click to expand...
Click to collapse
Hallo, wo bekomme ich das update?
Gruss

Fliesenleger said:
Hallo, wo bekomme ich das update?
Gruss
Click to expand...
Click to collapse
I would also like to know, please.:confuso::Boa:

Upgrade
I have used this upgrade, works perfectly but erases the IGO satnav.
I'd love to know how to put TomTom on this unit instead.
Alan.
My unit is an A Sure AS-S3A3 Picture in my Album, see profile.

I have updated my Asure Opel headunit Type S3OVG.
Before the update the text to speech from google navigation didn't work. There was also an update shown, but updatescreen crashes when opened.
Now, after the update, all seems to work.

I have updated my A-Sure Android 7 Zoll Unit.
All working.

where are you getting this update from ?
i have a a-sure and need to update

I got mine from holzwuermchen76 pm him.
Alan.
smileyuk said:
where are you getting this update from ?
i have a a-sure and need to update
Click to expand...
Click to collapse
---------- Post added at 08:31 PM ---------- Previous post was at 08:28 PM ----------
I got mine from holzwuermchen76
Pm him.
Alan.
smileyuk said:
where are you getting this update from ?
i have a a-sure and need to update
Click to expand...
Click to collapse

Please share the update link in this tread so it can be usefully with all A-Sure owners

Seicane Android 10.0 - cutom roms and root possible?

Hi guys, im sorry if im asking in the wrong place but I dis not know where to start but any help is welcome.
I have just recently purchased a Seicane android 10.0 2gb ram 32g rom head unit for my 2012 Hyundai Elantra from Aliexpress.
I have not yet received my headunit however was wanting to know if there was a custom rom option available for the android 10? I see that there are many options available for previous android versions however I am yet to see any info re android 10 and custom roms/rooting options for it.
If anyone is able to point me in the right direction it would be a great help. Not sure if i can post links to the actual product but can provide a link via message if necessary

What is your head unit, details needed, is it an MTCD?

marchnz said:
What is your head unit, details needed, is it an MTCD?
Click to expand...
Click to collapse
Thanks for the reply, I am not entirely sure if it is an MTCB unit. Please have a look at the attached specs screenshot and let me know if it looks like the unit you are referring to?

isameking12 said:
Thanks for the reply, I am not entirely sure if it is an MTCB unit. Please have a look at the attached specs screenshot and let me know if it looks like the unit you are referring to?
Click to expand...
Click to collapse
Unable to ID, suggest staring with wiki in my sig.

marchnz said:
Unable to ID, suggest staring with wiki in my sig.
Click to expand...
Click to collapse
Thank you for taking the time to reply. Perhaps I will need to wait to get my hands on the unit to see if I can get some further info. For now I will do as you suggested and read through that wiki!
If anyone else has any idea or can point me in the right area, please do so

marchnz said:
Unable to ID, suggest staring with wiki in my sig.
Click to expand...
Click to collapse
Hi there myseicane h6032n android 10 has today been received and I have gone into the settings and this is about the only info i can find relating to the software/hardware info of this device. Are you able to identify the unit and root custom rom possibility?

isameking12 said:
Hi there myseicane h6032n android 10 has today been received and I have gone into the settings and this is about the only info i can find relating to the software/hardware info of this device. Are you able to identify the unit and root custom rom possibility?
Click to expand...
Click to collapse
I am not familiar as is not an MTCD device.
I'd suggest starting with the wiki and searching the forums, search for k2001

marchnz said:
I am not familiar as is not an MTCD device.
I'd suggest starting with the wiki and searching the forums, search for k2001
Click to expand...
Click to collapse
Thank you for your reply mate. I have just download cpuz and have taken some photos of the device and os info. Does this help you in anyway pointing me in the right direction or identifying if root or custom rom possible? Kind regards

Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk

C75 said:
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1My4VMd5K270qSfEnHauErffJEOS5fSLZ/view?usp=drivesdk
Click to expand...
Click to collapse
Hi Montgomery, what did that updated firmware does that the old one doesn't? I got one 9" seicane unit and I would love to know a way that could enable the bluetooth settings so I could tinker with it and connect other gadgets.
Model&Hardware: NWD_K2101(T3)
QUAD-CORE T3 P1
PlatformVER: K20Q-2020/04/01[15:06:16]-V0.01

junilson said:
Hi Montgomery, what did that updated firmware does that the old one doesn't? I got one 9" seicane unit and I would love to know a way that could enable the bluetooth settings so I could tinker with it and connect other gadgets.
Model&Hardware: NWD_K2101(T3)
QUAD-CORE T3 P1
PlatformVER: K20Q-2020/04/01[15:06:16]-V0.01
Click to expand...
Click to collapse
I'm not sure what you are asking. You can open the Bluetooth settings if that's what you want to know.

C75 said:
I'm not sure what you are asking. You can open the Bluetooth settings if that's what you want to know.
Click to expand...
Click to collapse
The thing is, I can connect my phone to the radio unit, but I can't search for Bluetooth devices because there isn't a option for Bluetooth for it in the Android Menu.
Also the car unit doesn't run anything at background, except Maps or music app (only if it's playing something)

2/32g unit?
Thank you for the update. Question please... What do you mean by 2 unit? I have an Allwinner T3p1 k2001 Quadcore 1024x600 screen A23 Android 10 and wondering if I could use your update in case I brick mine while trying to root... Do you know if your update would be compatible with a quad core? Trying hard to find a way to root but cant find my device in twrp and super bummed no one has guided isoking with his rooting desires since I have the exact same model and MCU to the T. I appreciate any guidance you could give. Not sure which Magisk img or twrp would be ok to use for my device, all usb drivers I've tried do not work, and really want root access with Google install capability. Thank you!

These are Allwinner based on the Sunliq platform..Allwinner has locked USB debugging on these units, and there is a formal petition against them for that, they dont play clean with GPL..
Since there is no operational USB debugging, it cannot be rooted or custom recoveried for now..

Hello All.
I apologise if this is not the right place to ask this question..
I have a seicane head unit on my
2003 SL55 AMG [see link]
Can someone guide me to installing a new rom and if not, can I get android auto on this head unit..
I live in Canada and am very frustrated with the Chinese version of the android software
Link..
2001-2004 Mercedes-Benz R230 SL350 SL500 Aftermarket Radio
This android radio head unit fits to 2001 2002 2003 2004 Mercedes-Benz SL R230 SL350 SL500 SL55 SL600 SL65, supports GPS navigation, Carplay, AHD camera.
www.seicane.com
Thank you for any help
Sydsimm