I recently installed the Wicked X v10.6 custom rom, however I have no wifi and cannot seem to fix this problem. I would like to return to stock rom, but not sure how. I have the SPH-L720T OH1 model. Could someone provide me the correct procedure for this? Thanks
Did u flash the OH1 kernel for the 720T...available here
http://forum.xda-developers.com/showthread.php?p=60907212
Sent from my SPH-L720 using XDA Free mobile app
jelive said:
Did u flash the OH1 kernel for the 720T...available here
http://forum.xda-developers.com/showthread.php?p=60907212
Sent from my SPH-L720 using XDA Free mobile app
Click to expand...
Click to collapse
I did. I flashed Wicked-X-v10.6, then the OH1 kernel, the L720T Converter, SystemUpdatesFix, Settings and then a few others like the Vol Boost, ViperEnabler and Xposed-v65-sdk21-arm-arter-V5-generic.zip
DonnaLeigh said:
I did. I flashed Wicked-X-v10.6, then the OH1 kernel, the L720T Converter, SystemUpdatesFix, Settings and then a few others like the Vol Boost, ViperEnabler and Xposed-v65-sdk21-arm-arter-V5-generic.zip
Click to expand...
Click to collapse
Sorry...had gone to bed Why not post in Wicked thread...dev can suggest what to try next. Post what you've done.
Sent from my SPH-L720 using XDA Free mobile app
DonnaLeigh said:
I recently installed the Wicked X v10.6 custom rom, however I have no wifi and cannot seem to fix this problem. I would like to return to stock rom, but not sure how. I have the SPH-L720T OH1 model. Could someone provide me the correct procedure for this? Thanks
Click to expand...
Click to collapse
Setup Odin on your PC, download the correct tar for your device from www.sammobile.com, flash tar to phone in Download Mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DonnaLeigh said:
I recently installed the Wicked X v10.6 custom rom, however I have no wifi and cannot seem to fix this problem. I would like to return to stock rom, but not sure how. I have the SPH-L720T OH1 model. Could someone provide me the correct procedure for this? Thanks
Click to expand...
Click to collapse
I don't understand how you can get wicked x to work. I been using it since 10.4 with no issues [emoji1]
Sent from my SPH-L720 using Tapatalk
Related
I just flash latest asia firmware P1000DXJM2
I have try using method in previous post ClockworkMod Recovery Beta
Im using International zImage & euro flash image
Still doesnt work..
Sent from my GT-P1000 using XDA App
Yah would like some help too. I own a singapore sgt. P1000dxjj2 but the instructions for CWM only for sprint etc. Would love if someone can provide some info for CWM installation
Sent from my GT-P1000 using Tapatalk
elnoxvie said:
Yah would like some help too. I own a singapore sgt. P1000dxjj2 but the instructions for CWM only for sprint etc. Would love if someone can provide some info for CWM installation
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Check Modaco (Paulobrian) or Rotohammer threads
Try using Odin to flash paulibrians kernel. It'll install CWM and you can convert to ext4 without losing your apps & data on your SD card
Sent from zombie infested Gingerbread.
GANJDROID said:
Try using Odin to flash paulibrians kernel. It'll install CWM and you can convert to ext4 without losing your apps & data on your SD card
Sent from zombie infested Gingerbread.
Click to expand...
Click to collapse
trying now : MCK Flash
yeah thanks all..
flashing MCK r3 (EXT4 version with ClockworkMod) http://loadbalancing.modaco.com/download.php?url=paul/p1000/p1000-mck-r3-ext4-cwm.tar using ODIN3 1.7
GANJDROID said:
Try using Odin to flash paulibrians kernel. It'll install CWM and you can convert to ext4 without losing your apps & data on your SD card
Sent from zombie infested Gingerbread.
Click to expand...
Click to collapse
Thanks. i will try that out.
Yeah im done, i got CWM n just flashing Modaco Custom Rom R1
Thanks all..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-P1000 using XDA App
Hello guys
I restored my nandroid backup which is the stock rom..
but after that my recovery is cwm and I want the stock one can I return to it?
please help me and if yes please give me the method step by step
Thanks
Madridii said:
Hello guys
I restored my nandroid backup which is the stock rom..
but after that my recovery is cwm and I want the stock one can I return to it?
please help me and if yes please give me the method step by step
Thanks
Click to expand...
Click to collapse
Reflash stock kernel or flash a kernel which have stock recovery like Kuro kernel
Can you give me one a stock kernel?
Sent from my GT-I8150 using XDA Premium app
Here is the list of stock kernel for galaxy y forum.xda-developers.com/showthread.php?t=1616810
Chose one.. And flash via Odin or any other method
Press thanks if I helped
or you can just extract your pdablabla.tar.md5 of stock rom from doky then put the boot.img on your sdcard, then install sgybicwm.zip (www.media*fire.com/?mlgi1fwhukrtgfx) from cwm
Sent from my GT-S5360 using Tapatalk 2
m.h.mahadi said:
Here is the list of stock kernel for galaxy y forum.xda-developers.com/showthread.php?t=1616810
Chose one.. And flash via Odin or any other method
Press thanks if I helped
Click to expand...
Click to collapse
thank you
but how to know which one for my phone? my region is MID
Madridii said:
thank you
but how to know which one for my phone? my region is MID
Click to expand...
Click to collapse
Goto about phone then see the build number of your rom... Then go to the kernel list that I've mentioned you, and look for the kernel package which one match with your build number...
For example my build number is gingerbread.DDLC3 see the screen shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then I should flash DDLC3 kernel..
Got it?
DOWNLOAD LINKS
http://fcore.eu/4c2kiqbdcujv
http://cloudyvideos.com/9dmmobawe7mp
http://uptobox.com/692kd0d7k5dh
can you confirm which kernel is with this firmware? as i read posts that say that samsung had updated the kernel for this firmware other than the last ND3 one.
katalony said:
can you confirm which kernel is with this firmware? As i read posts that say that samsung had updated the kernel for this firmware other than the last nd3 one.
Click to expand...
Click to collapse
3.03.1-1280411
MANNSAAB said:
3.03.1-1280411
Click to expand...
Click to collapse
Aaah i see, so there is no change for the last one.
Does this firmware have the extra large spacing in the multitask window/blurry Wi-FI icon as well? I think there has been a DPI porting issue with the French build.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yes there is lot of space in recent apps somehow any ways to fix it?
MANNSAAB said:
DOWNLOAD LINKS
http://fcore.eu/4c2kiqbdcujv
http://cloudyvideos.com/9dmmobawe7mp
http://uptobox.com/692kd0d7k5dh
Click to expand...
Click to collapse
torrent link to this firmware please
Awsome work
Great work
GUYS IF I FLASH THIS? is my csc will change automatically to INU?
Sent from my GT-N7100 using Tapatalk 2
Hello,
I am trying to flash the official kitkat firmware but I saw on this website:
http://m.ibtimes.co.uk/n7100xxufnd3...ficial-update-available-galaxy-note-2-1446096
the update is for baseband N7100XXUFND3. But I have the baseband N7100XXUFND3. Is it a problem if I flash this update and is it possible I get some problems with signal after flashing? Thanks in advance,
Sent from my GT-N7100 using XDA Free mobile app
MANNSAAB said:
DOWNLOAD LINKS
http://fcore.eu/4c2kiqbdcujv
http://cloudyvideos.com/9dmmobawe7mp
http://uptobox.com/692kd0d7k5dh
Click to expand...
Click to collapse
thanx bro...:good:
i have downloaded...
[cloudyvideos link is resumable..]
i will try this official rom on my note 2..
Danhoff1 said:
Hello,
I am trying to flash the official kitkat firmware but I saw on this website:
http://m.ibtimes.co.uk/n7100xxufnd3...ficial-update-available-galaxy-note-2-1446096
the update is for baseband N7100XXUFND3. But I have the baseband N7100XXUFND3. Is it a problem if I flash this update and is it possible I get some problems with signal after flashing? Thanks in advance,
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
I flashed the think it was Norwegian 4.4.2 rom & everything seemed fine for a couple of weeks then signal turned utter crap & emails & facebook would not load feeds & kept needing reset.
I think I will try this one but if it is the same i am going back to 4.3
Apparently the owner ran into an issue after trying to update to kit Kat with Odin. I presume he tried to flash the stock firmware since be doesnt know what root means. He says it boots up fine and you manage to get into the select language screen. But afterwards you get a sparse black screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sounds fixable. I should be able Odin another rom and flash cwm, root it and custom rom etc right?
Sent from my Galaxy S3
Looks like it's running acustom ROM at the moment.
If the owner knows how to flash firmware on a phone, why hasn't he fixed it himself?
Sent from my GT-I9505 using XDA Premium HD app
Obagleyfreer said:
Looks like it's running acustom ROM at the moment.
If the owner knows how to flash firmware on a phone, why hasn't he fixed it himself?
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
Um. The screenshot is of my phone showing his screenshot on gumtree.
This is his screenshot
I get what you mean though. Isn't Odin only used by users who know? Since normal users would perhaps use kies? Lol
Sent from my Galaxy S3
Sigh. Bought the phone, for 200 though. I flashed a stock firmware via Odin. Still same screen as above. Sigh. I tried rooting it and getting Philz touch on it. Touch input does not seem to work. Loaded aosp roms and kernels onto the phone. Flashed it via Philz recovery. Gives me bootloops.
Ideas?
Sent from my Galaxy S3
Managed to somehow install a aosp rom. Touch input doesn't work? Wtf? How do I fix it? Screen lights up fine so what's the issue?
Managed to get it linked to adb somehow. Any way I can fix the touch issue?
Sent from my Galaxy S3
same problem!!
bro any solution u found?? cuz i am having same problem..stuck after selecting language..
I just got a phone back I rooted for a family member two years ago solely for the purpose of obtaining hotspot. It has stock rom.
What info can I give you that will enable you to point me in the right direction to uproot and sell without issue?
I've been away from this kind of of stuff for a couple of years.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N920P using Tapatalk
Unroot, not uproot
Sent from my SM-N920P using Tapatalk
Odin stock tar from www.sammobile.com
bilgerryan said:
Odin stock tar from www.sammobile.com
Click to expand...
Click to collapse
Thanks for the tip, just now getting around to it.
Are you saying to go to the firmware section and download the latest firmware?
Isn't there something I have to check , like making sure the PDA matches my baseband version or something?
cfclay said:
Thanks for the tip, just now getting around to it.
Are you saying to go to the firmware section and download the latest firmware?
Isn't there something I have to check , like making sure the PDA matches my baseband version or something?
Click to expand...
Click to collapse
No, because this will change your Baseband as well.
Thanks- just take the top one for sprint and follow the instructions sounds like. Appreciate the tip! Anywhere where this download is available at a faster clip?
Sent from my iPhone using Tapatalk
cfclay said:
Thanks- just take the top one for sprint and follow the instructions sounds like. Appreciate the tip! Anywhere where this download is available at a faster clip?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Not that I know of.
Thanks for your help, worked like a charm!
Sent from my SM-N920P using Tapatalk