Database Users

Dreaded Samsung Retail Mode on Galaxy s5

Anyone out there willing to help guide me through the process of getting the retail mode removed form a samsung galaxy s5? Of course Im willing to compensate you for your time if we can get it to work.
Ive got no experience with Rom's and or installing a rom and the basic passwords have not worked on getting the software removed. Any help would be appreciated.
PhoneDoctor1

Which S5 model have you got?
Make a free account on sammobile dot com (Links are not allowed here)
Type your model S5 into the firmware section and download a ROM
Grab ODIN 3.09 or later (Easy to find with a quick google)
Extract the ROM from the zip, should end up with .MD5 file
Install Samsung drivers (Easy to find with a quick google or Installing KIES3 will also install them)
Put phone into download mode (Power off, then hold Vol down & Home & power, release when the warning appears and hit volume up when asked)
Connect phone to PC USB and wait for drivers to complete installing
Load .MD5 ROM into AP or PDA section of ODIN
Make sure only 'F.Reset Time' and 'Auto Reboot' options are selected in ODIN
Hit START on ODIN and wait for it to complete
All being well, your phone should reboot into the ROM, take a while for first boot, especially if you flash a Lollipop ROM (give it 15 mins+)
Some people find it hangs on first boot, and need to boot into recovery mode and factory reset after flashing the ROM

Same results.
*Detection* Thank you so much for your prompt response and help with this. Unfortunately the steps you provided didn't work for me. I was able to Get Odin, download the correct ROM, drivers, and everything. I installed the ROM on the phone (Took 4 minutes) though ODIN and it stated that it succeeded. Phone restarted and retail mode was back on the phone.
Any other options to get it removed?
PhoneDoctor1

Some instructions here on how to disable retail mode
http://www.naldotech.com/how-to-disable-exit-galaxy-s5-demo-live-unit-retail-mode/
How to delete, disable and exit Demo Live Unit Retail Mode on the Samsung Galaxy S5
1. The first thing to do is to disable the retail mode of the firmware.
2. Go to the app drawer and open an app called Samsung Retail.
3. Go to Configuration Settings and enter the password 5444 to unlock it.
4. Then uncheck “Disable the factory reset” and enter the following password M729Q16K8546.
5. Turn your Samsung Galaxy S5 off and boot into Recovery.
6. Go to Wipe data & factory reset and press OK.
7. The phone will reset and all the applications will get removed.
8. Flash a stock firmware with ODIN (tutorial).

There must be something different about this retail mode. It looks different than the others shown in previous posts or youtube videos. I can't seem to disable the app and the passwords don't work. Ive seen a few youtube videos on how to remove it and the one I see doesn't look like the one thats on this galaxy s5. Any other workaround to your knowledge?
PhoneDoctor1

Not that I know of off hand, I`ll post back here if I find anything, it might be quicker to take it to a phone shop and ask them to disable it for you

PhoneDoctor1 said:
There must be something different about this retail mode. It looks different than the others shown in previous posts or youtube videos. I can't seem to disable the app and the passwords don't work. Ive seen a few youtube videos on how to remove it and the one I see doesn't look like the one thats on this galaxy s5. Any other workaround to your knowledge?
PhoneDoctor1
Click to expand...
Click to collapse
Which version S5 have you got?
Just noticed this thread for the G900X to disable Retail Mode
http://forum.xda-developers.com/showthread.php?t=2733083

Ive got the t-mobil version here in the states. I did see that thread before I posted mine but that wont enable me to make calls. It will most likely turn the phone into a wifi capable phone without cell service.

Sorry, I meant which model S5, mine is the G900F
I take it you bought the phone second hand? Unless someone else can help I think taking it in for repair would be the best bet if those tutorials are not working

I would like to know how you got into retail mode!
And, of course, your model. Its in the system informations.

I had a similar issue with a laptop once (purchased the display model).....
The only thing that fixed it was formatting the hard drive and re installing everything from the recovery discs......
I guess the equivalent for Android would be to flash a PIT file (I think this will reformat the memory) then the firmware (both) with odin........
If you DO go this route, be EXTREMELY careful to flash the CORRECT pit file as flashing the wrong pit will irrevocably brick your phone.........
Sent from my rooted kn0x0 stocKK SM-G900F S5

I appreciate the help and responses. From my understanding the retail mode can not be removed. It seems that Samsung specially designed these phones with software that can't just easily be flashed.

Successfully removed Retail Mode from AT&T Samsung Galaxy S5 SM-G900A
PhoneDoctor1 said:
I appreciate the help and responses. From my understanding the retail mode can not be removed. It seems that Samsung specially designed these phones with software that can't just easily be flashed.
Click to expand...
Click to collapse
I had just about given up on a straightforward fix, and was about to resort to some major firmware manipulation that would have likely led me to all sorts of confusion. It turns out the password was "rethink" as is listed in multiple places across the web. (AT&T SM-G900A Galaxy S 5) It is applied to the Samsung Retail Mode app which has a "burger" icon in top right corner of the screen that must be selected first to lead towards password entry. This is not the "Retail Experience" app, but the other similar one. Once the Retail Mode app is uninstalled, there are intuitive steps leading to uninstalling of the "Retail Experience" one next, with no new passwords.

Need to downgrade from Marshmallow to Kit Kat because of Samsung Lock

I put myself into a perdicament and I have been searching high and low to figure this out.
Currently I am samsung Locked out of my phone, I am getting a processing failed error even on a correct samsung account entry. I've tried everything from deleting the account to re-entering the IMEI on the account to register it on the same username and pass. Unfortunately nothing.
Next I tried to bypass the samsung lock by using Root Junky's Method. I couldn't follow it all the way because my phone didn't have one crucial step ( to scan business card button) So I basically got around it by getting into google play and downloading a file explorer and continuing the process. I then downloaded SideSync and sololauncher to have some sort of homepage.
With all that I'm still not able to enter the samsung account info. when you try to add another account it just backs out instantly, and if you try to enter the information on an app that makes you log in, it just immediately closes the app.
Sooo, I've been reading the next possible solution is to get the phone on Kit Kat but I'm honestly having the hardest time doing so.
I dropped the phone down to lollipop and tried rooting but I got stuck on the phone not getting usb debugging dialog to pop up, even though It pops up for my samsung s3 so I know it's not the cord or my computer. This is where I'm stuck at. I have no clue how to drop the phone back down to Kit kat and would love someone to help me out or to just give me a nudge in the right direction.
Currently on pd1 stock samsung s5 vzw.
Thank you guys in advanced!

http://forum.xda-developers.com/verizon-galaxy-s5/general/booted-ncg-pb1-bootloader-t3431692
http://forum.xda-developers.com/ver.../reactivation-lock-off-finally-stuck-t3433342

damagi123 said:
http://forum.xda-developers.com/verizon-galaxy-s5/general/booted-ncg-pb1-bootloader-t3431692
http://forum.xda-developers.com/ver.../reactivation-lock-off-finally-stuck-t3433342
Click to expand...
Click to collapse
Thank you for the threads! The bottom one "reactivation lock" one is actually the one I started on, but for some reason, my phone will not for hte life of me bring up the debugging dialog, if i can get the debugging dialog to pop up then everything will be perfect and I can root and continue on from there.. but for some reason the galaxy s5, will not pop up that message, I've flashed ok3, pb1, pd1, and pd4 or whatever the latest one is. Hilariously pd4 actually popped up the debugging dialog to accept permission to my computer.... something that I can't do anything about or do anything with that since you cannot root on pd4. I have a galaxy s3 and that pops up debugging dialog instantly so I know it's neither my cord or my computer. All drivers, programs and adb are installed on my computer.
Those two forum threads are perfect if I can just get debugging to pop up.. it's like once I get the bypass to work for ok3 or pb1, none of the status bar things work, some pop ups work and I think that it is popping up but it's blocking it or something seeing how I'm just by passed through it and not actually done with the setup wizard.

Just need to get my phone authorized instead of unauthorized. the RSA KEY debugging pop up wont pop up at all. I'm not sure if it's because samsung lock basically shuts down part of the phone to be functional and wont let it pop up? I just can't figure it out.

I've been trying to figure this out but so far a no go
To make my guide 100% working I will try again tonight I think

natepez23 said:
I put myself into a perdicament and I have been searching high and low to figure this out.
Currently I am samsung Locked out of my phone, I am getting a processing failed error even on a correct samsung account entry. I've tried everything from deleting the account to re-entering the IMEI on the account to register it on the same username and pass. Unfortunately nothing.
Next I tried to bypass the samsung lock by using Root Junky's Method. I couldn't follow it all the way because my phone didn't have one crucial step ( to scan business card button) So I basically got around it by getting into google play and downloading a file explorer and continuing the process. I then downloaded SideSync and sololauncher to have some sort of homepage.
With all that I'm still not able to enter the samsung account info. when you try to add another account it just backs out instantly, and if you try to enter the information on an app that makes you log in, it just immediately closes the app.
Sooo, I've been reading the next possible solution is to get the phone on Kit Kat but I'm honestly having the hardest time doing so.
I dropped the phone down to lollipop and tried rooting but I got stuck on the phone not getting usb debugging dialog to pop up, even though It pops up for my samsung s3 so I know it's not the cord or my computer. This is where I'm stuck at. I have no clue how to drop the phone back down to Kit kat and would love someone to help me out or to just give me a nudge in the right direction.
Currently on pd1 stock samsung s5 vzw.
Thank you guys in advanced!
Click to expand...
Click to collapse
Have wifi signed and good to go before you follow his method then do his method at the WiFi screen after signing into WiFi
at the contact screen click add a website
And add this website
http://www.rootjunkysdl.com/files/?dir=Apps/FRP
Then click on the website link and it will go to web browser
and download frp bypass app and install tell me if it works

[email protected] said:
Have wifi signed and good to go before you follow his method then do his method at the WiFi screen after signing into WiFi
at the contact screen click add a website
And add this website
http://www.rootjunkysdl.com/files/?dir=Apps/FRP
Then click on the website link and it will go to web browser
and download frp bypass app and install tell me if it works
Click to expand...
Click to collapse
Heya Yeah, I have already done almost all of rootjunky's methods. Got into a a webbrowser and accessed google play, also downloaded that frp work around but i think it's for the google reactivation lock not samsungs reactivation lock. I reboot and it goes right back into the same thing. the frp bypass just makes it so you can reenter your google account info if you are google locked. :/

how to root samsung galaxy note 4 or bypass samsung acount login

Hi, i just bought a "new" samsung galaxy note 4
product name sm-n910v
I tried to update my phone but this failed. So i did hard reset, and the phone is ofcourse locked with a samsung account. Now i cant get passed this.
I tried to roof the phone with odin but this also fails. I downloaded Odin 3 and installed CF-Auto-Root-trltevzw-trltevzw-smn910v but after i start odin program it takes only a few secounds at it fails. What else can i do? Need some more tricks

mrgluck said:
Hi, i just bought a "new" samsung galaxy note 4
product name sm-n910v
I tried to update my phone but this failed. So i did hard reset, and the phone is ofcourse locked with a samsung account. Now i cant get passed this.
I tried to roof the phone with odin but this also fails. I downloaded Odin 3 and installed CF-Auto-Root-trltevzw-trltevzw-smn910v but after i start odin program it takes only a few secounds at it fails. What else can i do? Need some more tricks
Click to expand...
Click to collapse
Hi so i had a similar problem to this on my note 3.
What I did was
Hard reset and then reboot and when it goes through the initial settings I think on the first page click on accessibility and then in there find language and input you want to go to text to speech and download any language u want and you should then be able to put in your own Samsung account details and then when you go through to the abnormal reset locked page your account you just put on there should be there.
If that doesn't work(which sometimes it doesn't you will want to try again but this time when you go to accessibility you want to try find anything in there that will let you go into a browser like a terms and conditions or click on something like that. Once in a browser search for google play and download a phone settings app and then open the app through google play and go into security settings and disable reactivation. Lock thing

painterdannz said:
Hi so i had a similar problem to this on my note 3.
What I did was
Hard reset and then reboot and when it goes through the initial settings I think on the first page click on accessibility and then in there find language and input you want to go to text to speech and download any language u want and you should then be able to put in your own Samsung account details and then when you go through to the abnormal reset locked page your account you just put on there should be there.
If that doesn't work(which sometimes it doesn't you will want to try again but this time when you go to accessibility you want to try find anything in there that will let you go into a browser like a terms and conditions or click on something like that. Once in a browser search for google play and download a phone settings app and then open the app through google play and go into security settings and disable reactivation. Lock thing
Click to expand...
Click to collapse
ya but what if the accesability option isnt there ? and there is no visable way to get to a browser unlike a J3(6)?

@mrgluck: I've found that the easiest way to beat FRP locks on a Samsung phone, is to flash combination firmware.
A combo firmware is a firmware used by Samsung to diagnose issues. It isnt meant to be used by average users. However, it can also remove an FRP lock.
Steps:
1. Download Odin (use whatever version you want, i've always used 3.12.7 with the Note 4)
2. Install the latest Samsung USB driver
3. Download combo firmware, search for "n910v combination firmware" or "n910v combination file" on Google
4. Start Odin, load up the tar.md5 file into the AP slot (if it downloaded as a zip/rar/whatever, you need to extract it first), then click Start
5. Once it's done, boot the phone, combo firmware should load. This isnt like anything you've ever used, so dont play around too much once it's booted, could cause yourself more issues...unless, of course, you really know what you're doing
6. Power off, boot into stock recovery, do factory reset, boot it up again
7. Power off, flash regular firmware (not combo) with Odin
When you get to the setup wizard screens, the FRP lock should be gone. I've done this on dozens of phones for myself and friends, it seemed to always work. It's been quite awhile since I flashed one of these, so if my steps arent quite right...

try this
https://www.youtube.com/watch?v=51-WfoNanTo

Samsung FRP Bypass

Hi, I'm a total noob on this but I don't know where to start to looking for an answer.
My girlfriend went on vacation (from Chile) to the united states, her mother gave her a cell phone (her cell phone at that moment) an almost new Samsung Galaxy S7 Edge (SM-G935P) from the Sprint Network.
Before returning to Chile the cell phone was unlocked (or so they said at Spring), so here in Chile she put her local carrier SIM but the cell phone never recognized the Sim Card.
So she hard reset the cell phone. Everything went well until he had to enter the original Gmail account for the cell phone. Her mother did not remember the password so after som trial and error, they manged to reset the Google Account. But now when I try to enter de Gmail and password give me this error: Unable to sign in device due to a recent password change. try again in 24 hours, I have waited more than 24 hours and still can't activate the account.
The cell phone is still showing at her known devices in her mother's Gmail account, and the password is correct but I can't by pass the Gmail Activation, I was reading that I can downgrade to a firmware that allowed me to by pass the Samsung FRP but I don't know wich firmware I can use.
Can someone plase guide me how can I activate this cell phone.
Thank you!

edit: You were right I apologize.
If you want to get your password then whoever knows the best information will need to tell google over the phone what that information was when initially set up...birthdays, time of creation,etc-when they ask and %100 will ask. If she/you don't know it..you may never get it back... but calling their --> Customer Support <-- is your best option.

For s7 edge Android 7.0
So I found a way to bypass Google frp on Android 7.0 for the s7 edge and couple other model, it's an old way but modified. First enter into the Google account login screen where it says verify your account. All you do is simply over load it with characters. Tyler a bunch misc letters and number until you have a long good string then begine select all copy paste do this until your phone seem like it going to freeze up. I did it until it took about 2-5 mins to go through. Doing this will send you to a screen says error something went wrong. Hit enternor continue and if you notice this time when it goes back to verify your account the screen should have a black background at the top where's your notifacatioons are . Repeat 2-3-4 times overloading it and getting the error message I'm not sure exactly how many time think it suffers a on phone and Android build I just know once isn't enough to do it so do it a fewbtime it'll take awhile to get the first error but after that you should have the character line copies and ready to paste. After a couple time hit back arrow on your phone clear to where it ask to select language or start screen and emergency call if done correctly it should now give you the accessibility menu also enter into the accessibility option and modify your set up. Mess with stuff a little be careful with setting up universal switches as you can really mess yourself up. At some point in time you should be able to get your notification menu to drop down and open. When this happens hit the little setting menu button long click it and it should shortcut you to system settings. Bypassing for temporarily. Set up your setting and movie your app permissions as much as possible. Now the trick is getting my Knox downloaded open and set up on your phone. Once you do this make sure you click on both my Knox and regular device administration for know to have some control and make sure you say yes for Knox to be able to reset wipe your phone . After device administration is set and that all done go to your pc or another phone tablet whatever and log into know online and you hold re your phone connected on it white a button that says wipe this phone. Click it make sure the phone has Wi-Fi or service connected and wait for phone to wipe this should reset frp and Google verification back to being a new phone. There ya go merry Christmas

Is this fix legit?^^

Master Shredder said:
Is this fix legit?^^
Click to expand...
Click to collapse
Fцck no it ain't legit. Dude probably got baked & strung up that nonsense to laugh at folks who tried it. You could string up a petrabyte worth of miscellaneous characters so long that your phone would be permanently frozen... & you wouldn't get an error message to pop up, let alone one that would change your notification bar background color or whatever else he said
☆KØŁØЯΛĐØ☆

Master Shredder said:
Is this fix legit?^^
Click to expand...
Click to collapse
No, It's not.
I still can not remove the Samsung FRP, I've tryed all the methods I found online, but still nothing.

S7 & S7 Edge FRP [SOLVED]
Here's the real S7 & S7 Edge FRP bypass method..
Nougat 7.0+ will NOT work; You NEED to downgrade to Marshmallow. Links to Stock Firmware & FRP Removal files posted at the bottom.
- Download & extract the .zip file from my Google Drive below to your PC, then extract + run Odin
- Flash the boot.tar file that corresponds with your device (enables ADB)
- Once the device reboots to the Welcome page, run the Qualcomm.bat file (reboots to Download Mode & removes FRP Lock)
- Back in Download Mode, flash the [MM] Stock ROM (CSC_HOME keeps user data; CSC wipes user data)
You've now successfully kicked FRP's ass from the device. Congrats.
NOTICE:
- You will be able to upgrade back to Nougat 7.0 following successful FRP Removal
- I INTENTIONALLY LEFT A FEW STEPS OUT. It took me a solid week to finally crack this migraine of a phone. You WILL have to figure some parts out on your own just like I did. If you cant, why are you even here?
Stock Firmware located here: https://forum.xda-developers.com/sp...rmware-g935p-pe1-official-sprint-6-0-t3414654
FRP Removal files located here: https://drive.google.com/open?id=0B-BpyLgU2mXlbkVGUDVHWkVnM0E
☆KØŁØЯΛĐØ☆

☆KØŁØЯΛĐØ☆ said:
Here's the real S7 & S7 Edge FRP bypass method..
Nougat 7.0+ will NOT work; You NEED to downgrade to Marshmallow. Links to Stock Firmware & FRP Removal files posted at the bottom.
- Download & extract the .zip file from my Google Drive below to your PC, then extract + run Odin
- Flash the boot.tar file that corresponds with your device (enables ADB)
- Once the device reboots to the Welcome page, run the Qualcomm.bat file (reboots to Download Mode & removes FRP Lock)
- Back in Download Mode, flash the [MM] Stock ROM (CSC_HOME keeps user data; CSC wipes user data)
You've now successfully kicked FRP's ass from the device. Congrats.
NOTICE:
- You will be able to upgrade back to Nougat 7.0 following successful FRP Removal
- I INTENTIONALLY LEFT A FEW STEPS OUT. It took me a solid week to finally crack this migraine of a phone. You WILL have to figure some parts out on your own just like I did. If you cant, why are you even here?
Stock Firmware located here: https://forum.xda-developers.com/sp...rmware-g935p-pe1-official-sprint-6-0-t3414654
FRP Removal files located here: https://drive.google.com/open?id=0B-BpyLgU2mXlbkVGUDVHWkVnM0E
☆KØŁØЯΛĐØ☆
Click to expand...
Click to collapse
Hi ☆KØŁØЯΛĐØ☆, I think I ****ed up.
I follow your instructions, but after the first step (flashing boot.tar) the phone whent on a endless reboot.
Please can you help me.

☆KØŁØЯΛĐØ☆ said:
Here's the real S7 & S7 Edge FRP bypass method..
Nougat 7.0+ will NOT work; You NEED to downgrade to Marshmallow. Links to Stock Firmware & FRP Removal files posted at the bottom.
- Download & extract the .zip file from my Google Drive below to your PC, then extract + run Odin
- Flash the boot.tar file that corresponds with your device (enables ADB)
- Once the device reboots to the Welcome page, run the Qualcomm.bat file (reboots to Download Mode & removes FRP Lock)
- Back in Download Mode, flash the [MM] Stock ROM (CSC_HOME keeps user data; CSC wipes user data)
You've now successfully kicked FRP's ass from the device. Congrats.
NOTICE:
- You will be able to upgrade back to Nougat 7.0 following successful FRP Removal
- I INTENTIONALLY LEFT A FEW STEPS OUT. It took me a solid week to finally crack this migraine of a phone. You WILL have to figure some parts out on your own just like I did. If you cant, why are you even here?
Stock Firmware located here: https://forum.xda-developers.com/sp...rmware-g935p-pe1-official-sprint-6-0-t3414654
FRP Removal files located here: https://drive.google.com/open?id=0B-BpyLgU2mXlbkVGUDVHWkVnM0E
☆KØŁØЯΛĐØ☆
Click to expand...
Click to collapse
Flashing the boot image tar file causes bootloop. I believe that's also the eng boot file? For root? How do you solve bootloop? Also what marshmallow were you on before doing this?

jazzdglass said:
Flashing the boot image tar file causes bootloop. I believe that's also the eng boot file? For root? How do you solve bootloop? Also what marshmallow were you on before doing this?
Click to expand...
Click to collapse
I have not been able to fix it yet, it wasn't on MM it was Nougat.
You know another boot file I can use?

keiichitroncio said:
I have not been able to fix it yet, it wasn't on MM it was Nougat.
You know another boot file I can use?
Click to expand...
Click to collapse
There is Nougat boot files. Check xda here for Qualcomm s7 root. There's a boot file you need to flash before doing adb root.bat..this enables adb, But this also causes bootloop.

jazzdglass said:
There is Nougat boot files. Check xda here for Qualcomm s7 root. There's a boot file you need to flash before doing adb root.bat..this enables adb, But this also causes bootloop.
Click to expand...
Click to collapse
I've been reading a lot a topics here at XDA and I'm overly confused about which method or boot file to use.
I think this could be the one:
https://forum.xda-developers.com/tm...eres-how-rooted-nougat-s7-edge-g935t-t3567502
What do you think? although it is for another is for G935T no G935P
Thank you

keiichitroncio said:
I've been reading a lot a topics here at XDA and I'm overly confused about which method or boot file to use.
I think this could be the one:
https://forum.xda-developers.com/tm...eres-how-rooted-nougat-s7-edge-g935t-t3567502
What do you think? although it is for another is for G935T no G935P
Thank you
Click to expand...
Click to collapse
Just downgrade to marshmallow.. Try PJ2.. I used that. Flash the boot file provided, run Qualcomm.bat via adb.. Then flash again 6.0.1... If phone reboot after flash boot file, you'll have to be very fast, after phone boot to welcome screen, before it reboots, keep running the Qualcomm.bat till u see adb recognize device. It will say error. About phone storage. Just ignore. It has been unlocked

Starting to see how much of a headache this sh¡t was is? Took me a solid week to crack it.
Bravo @jazzdglass Props on figuring it out
KØŁØЯΛĐØ

☆KØŁØЯΛĐØ☆ said:
Starting to see how much of a headache this sh¡t was is? Took me a solid week to crack it.
Bravo @jazzdglass Props on figuring it out
KØŁØЯΛĐØ
Click to expand...
Click to collapse
Do you happen to have the exynos adb bypass code?

OMFG this freaking worked!!
☆KØŁØЯΛĐØ☆ said:
Here's the real S7 & S7 Edge FRP bypass method..
Nougat 7.0+ will NOT work; You NEED to downgrade to Marshmallow. Links to Stock Firmware & FRP Removal files posted at the bottom.
- Download & extract the .zip file from my Google Drive below to your PC, then extract + run Odin
- Flash the boot.tar file that corresponds with your device (enables ADB)
- Once the device reboots to the Welcome page, run the Qualcomm.bat file (reboots to Download Mode & removes FRP Lock)
- Back in Download Mode, flash the [MM] Stock ROM (CSC_HOME keeps user data; CSC wipes user data)
You've now successfully kicked FRP's ass from the device. Congrats.
NOTICE:
- You will be able to upgrade back to Nougat 7.0 following successful FRP Removal
- I INTENTIONALLY LEFT A FEW STEPS OUT. It took me a solid week to finally crack this migraine of a phone. You WILL have to figure some parts out on your own just like I did. If you cant, why are you even here?
Stock Firmware located here: https://forum.xda-developers.com/sp...rmware-g935p-pe1-official-sprint-6-0-t3414654
FRP Removal files located here: https://drive.google.com/open?id=0B-BpyLgU2mXlbkVGUDVHWkVnM0E
☆KØŁØЯΛĐØ☆
Click to expand...
Click to collapse
You sir are a genius. I tip my hat to you.... The only method out of....pretty much the entire internet...that actually works. To all other modders, if you follow the instructions carefully, this will work. Thank again man.:good::good::good:

I have a G935V that is stuck with FRP. I reset my password today and then happened to try to flash a new ROM (didnt know about FRP at the time).
Been trying this all day, but cant get the S7 & S7 Edge QUALCOMM.bat to run on the phone... a flashed back to MM and the Boot.rar pushes fine, but when the phone gets to the welcome screen its like my computer doesn't recognize the phone is connected. Any ideas?

This worked great on my VZW s7 (just had to get the right VZW firmware)...
@KjK89, you have to run the .bat file before the welcome screen. I basically kept running it over and over during boot and it took before th welcome screen.

Check my post about SAMSUNG S7 Nougat 7.0 frp remove

Thanks So much, the only thing that actually worked!
☆KØŁØЯΛĐØ☆ said:
Here's the real S7 & S7 Edge FRP bypass method..
Nougat 7.0+ will NOT work; You NEED to downgrade to Marshmallow. Links to Stock Firmware & FRP Removal files posted at the bottom.
- Download & extract the .zip file from my Google Drive below to your PC, then extract + run Odin
- Flash the boot.tar file that corresponds with your device (enables ADB)
- Once the device reboots to the Welcome page, run the Qualcomm.bat file (reboots to Download Mode & removes FRP Lock)
- Back in Download Mode, flash the [MM] Stock ROM (CSC_HOME keeps user data; CSC wipes user data)
You've now successfully kicked FRP's ass from the device. Congrats.
NOTICE:
- You will be able to upgrade back to Nougat 7.0 following successful FRP Removal
- I INTENTIONALLY LEFT A FEW STEPS OUT. It took me a solid week to finally crack this migraine of a phone. You WILL have to figure some parts out on your own just like I did. If you cant, why are you even here?
Stock Firmware located here: https://forum.xda-developers.com/sp...rmware-g935p-pe1-official-sprint-6-0-t3414654
FRP Removal files located here: https://drive.google.com/open?id=0B-BpyLgU2mXlbkVGUDVHWkVnM0E
☆KØŁØЯΛĐØ☆
Click to expand...
Click to collapse
Anybody looking for a fix for Galaxy S7 and S7 Edge Factory Reset Protection Bypass needs to follow these steps and you'll get past this pesky protection.
The only step that wasn't clear was this:
- Flash the boot.tar file that corresponds with your device (enables ADB)
On Odin you have to choose the boot.tar file corresponding to your model number. This is done by selecting the BL button and only that one then in Odin click Start. This might be clear for veterans to flashing phones with new firmwares but it wasn't clear for me, being the n00b that I am. Thanks again. This worked great!

Help me with flashing stock firmware

Hi
I got my wife a Samsung S8, SIM free as it was cheaper to buy the phone out right and get a 3 SIM only deal.
Only problem is because we got the phone from a online retailer, 3 won't activate the wifi calling.
So I have decided to flash the 3 S8 firmware via odin to my wife's phone but before I do that I have a few questions so I know I don't mess things up.
I will list the questions in number form so could you list the answers in number form with answer matching the question number, so I know what people are talking about.
1. When I glanced at Sammobile, I saw nothing mentioned about 3. Only thing I saw was H3G does this mean 3....if not what is 3 software listed as.
2. Will flashing this firmware wipe or factory reset her phone. (I know that I need to back things up anyway)
3. Will doing this Firmware flash void her insurance. As it's official Samsung software, I didn't think so but I want to be sure.
4. After the update will her phone be locked to 3.
5. Has anyone got any tips and guides which can help with this.
6. I hear that you can google blocked doing this type of thing, how do you get around getting blocked and if I do, how do I unblock a google blocked phones.
7. Will flashing 3 firmware actually give me wifi calling in the end.
8. After I have installed the firmware....will I receive future android/ Samsung updates. E.g. android 7 to android 8 updates, security patches and bug fixes
Thanks guys I will leave those questions for now....if I have anymore I will add them on another comment.
Hope you can help me I have attached some stuff I saw on the net incase it helps in anyway

Owenboy89 said:
Hi
I got my wife a Samsung S8, SIM free as it was cheaper to buy the phone out right and get a 3 SIM only deal.
Only problem is because we got the phone from a online retailer, 3 won't activate the wifi calling.
So I have decided to flash the 3 S8 firmware via odin to my wife's phone but before I do that I have a few questions so I know I don't mess things up.
I will list the questions in number form so could you list the answers in number form with answer matching the question number, so I know what people are talking about.
1. When I glanced at Sammobile, I saw nothing mentioned about 3. Only thing I saw was H3G does this mean 3....if not what is 3 software listed as.
2. Will flashing this firmware wipe or factory reset her phone. (I know that I need to back things up anyway)
3. Will doing this Firmware flash void her insurance. As it's official Samsung software, I didn't think so but I want to be sure.
4. After the update will her phone be locked to 3.
5. Has anyone got any tips and guides which can help with this.
6. I hear that you can google blocked doing this type of thing, how do you get around getting blocked and if I do, how do I unblock a google blocked phones.
7. Will flashing 3 firmware actually give me wifi calling in the end.
8. After I have installed the firmware....will I receive future android/ Samsung updates. E.g. android 7 to android 8 updates, security patches and bug fixes
Thanks guys I will leave those questions for now....if I have anymore I will add them on another comment.
Hope you can help me I have attached some stuff I saw on the net incase it helps in anyway
Click to expand...
Click to collapse
Firstly, there are Dozens and dozens of flash guides all over the web on flashing a SS phones with ODIN, 2nd'ly, its one of the easiest phones to flash..
Before you do anything download and install the latest SS USB drivers.. plug your phone in so they are detected.. then goto>settings and turn ON USB debugging in developer options.. plug in phone again.. so the device is detected again, then unplug... this installs the (A)ndroid (D) ebug (B)ridge driver, leave USB Debugging ON..
Your questions:,,
1) Yes H3G is 3UK... also EE use wifi calling..
2) Yes, it will wipe her phone... When you download your H3G firmware.. there are 2 CSC files in the folder.. I recommend using CSC... do not use HOME_CSC
3) No it will not void the warranty... its only when you trip KNOX by rooting, or custom roms that you invalidate warranty... Stock is fine
4) Yes it will... you will have to get an Unlock code to SIM unlock her phone.. SIM Unlock.. is not Flashing a rom.. What makes SS devices so cool.. is that you can flash any stock rom from any provider.. and it doesnt affect the bootloader, so you could flash an unbranded (open), EE or O2 rom on your 3 SIM locked phone..
5) Theres so many on the web and on XDA for SS phones and ODIN flashing, just type "Galaxy S8 back to stock" into search. My advice.. READ READ and more READ the guides ALL THE WAY Through, before you do ANYTHING AT ALL.. and make sure the phone you have has no SIM locks or security locks on it before you start.
6) Never heard of this... its only a stock rom your flashing, youll be fine
7) If 3 support Wifi Calling and the Rom your flashing has it coded in, then Yes it should work fine. EE also support Wifi calling
8) Yes... its a STOCK Rom with a STock recovery and STOCK Knox... so you will recieve updates according to when they are rolled out by that prvider... So, if its a 3 Rom, youll get updates when 3 push them out... if its an O2 rom, youll get them from O2.. and so on.... That is why soo many people flash Unbranded/Unlocked Open Roms... because unlocked phones have, in the past, gotten updates first and factory unlocked phones / roms dont come with Bloatware / carrier rubbish apps installed ..
Remember.. Just READ everything
Hope this helps

NightOrchid said:
Firstly, there are Dozens and dozens of flash guides all over the web on flashing a SS phones with ODIN, 2nd'ly, its one of the easiest phones to flash..
Before you do anything download and install the latest SS USB drivers.. plug your phone in so they are detected.. then goto>settings and turn ON USB debugging in developer options.. plug in phone again.. so the device is detected again, then unplug... this installs the (A)ndroid (D) ebug (B)ridge driver, leave USB Debugging ON..
Your questions:,,
1) Yes H3G is 3UK... also EE use wifi calling..
2) Yes, it will wipe her phone... When you download your H3G firmware.. there are 2 CSC files in the folder.. I recommend using CSC... do not use HOME_CSC
3) No it will not void the warranty... its only when you trip KNOX by rooting, or custom roms that you invalidate warranty... Stock is fine
4) Yes it will... you will have to get an Unlock code to SIM unlock her phone.. SIM Unlock.. is not Flashing a rom.. What makes SS devices so cool.. is that you can flash any stock rom from any provider.. and it doesnt affect the bootloader, so you could flash an unbranded (open), EE or O2 rom on your 3 SIM locked phone..
5) Theres so many on the web and on XDA for SS phones and ODIN flashing, just type "Galaxy S8 back to stock" into search. My advice.. READ READ and more READ the guides ALL THE WAY Through, before you do ANYTHING AT ALL.. and make sure the phone you have has no SIM locks or security locks on it before you start.
6) Never heard of this... its only a stock rom your flashing, youll be fine
7) If 3 support Wifi Calling and the Rom your flashing has it coded in, then Yes it should work fine. EE also support Wifi calling
8) Yes... its a STOCK Rom with a STock recovery and STOCK Knox... so you will recieve updates according to when they are rolled out by that prvider... So, if its a 3 Rom, youll get updates when 3 push them out... if its an O2 rom, youll get them from O2.. and so on.... That is why soo many people flash Unbranded/Unlocked Open Roms... because unlocked phones have, in the past, gotten updates first and factory unlocked phones / roms dont come with Bloatware / carrier rubbish apps installed ..
Remember.. Just READ everything
Hope this helps
Click to expand...
Click to collapse
Thank you so much. I will make sure to do my research. I have used odin before so I have some experience using the tool but not for big things like this. Last thing I used it for was to download TWRP to my rooted tablet.
I will also pull out her memory card so she can save her photo......she will be pissed about the wiping the phone part but if we want wifi calling then needs are a must.
Anyway of backing up her phone on a level where I can just put in her user name and password it will literally restore back to the point of the last back up....eg install all her the apps and themes the way she had them before the firmware update.
It's really important I nail this, as this is the first time we have gone SIM free and I don't want to be going back to paying extra for contracts just because we need the wifi calling. (And we both hate the three in touch app)....so my success with this will be important for the next phones we buy.

NightOrchid said:
Firstly, there are Dozens and dozens of flash guides all over the web on flashing a SS phones with ODIN, 2nd'ly, its one of the easiest phones to flash..
Before you do anything download and install the latest SS USB drivers.. plug your phone in so they are detected.. then goto>settings and turn ON USB debugging in developer options.. plug in phone again.. so the device is detected again, then unplug... this installs the (A)ndroid (D) ebug (B)ridge driver, leave USB Debugging ON..
Your questions:,,
1) Yes H3G is 3UK... also EE use wifi calling..
2) Yes, it will wipe her phone... When you download your H3G firmware.. there are 2 CSC files in the folder.. I recommend using CSC... do not use HOME_CSC
3) No it will not void the warranty... its only when you trip KNOX by rooting, or custom roms that you invalidate warranty... Stock is fine
4) Yes it will... you will have to get an Unlock code to SIM unlock her phone.. SIM Unlock.. is not Flashing a rom.. What makes SS devices so cool.. is that you can flash any stock rom from any provider.. and it doesnt affect the bootloader, so you could flash an unbranded (open), EE or O2 rom on your 3 SIM locked phone..
5) Theres so many on the web and on XDA for SS phones and ODIN flashing, just type "Galaxy S8 back to stock" into search. My advice.. READ READ and more READ the guides ALL THE WAY Through, before you do ANYTHING AT ALL.. and make sure the phone you have has no SIM locks or security locks on it before you start.
6) Never heard of this... its only a stock rom your flashing, youll be fine
7) If 3 support Wifi Calling and the Rom your flashing has it coded in, then Yes it should work fine. EE also support Wifi calling
8) Yes... its a STOCK Rom with a STock recovery and STOCK Knox... so you will recieve updates according to when they are rolled out by that prvider... So, if its a 3 Rom, youll get updates when 3 push them out... if its an O2 rom, youll get them from O2.. and so on.... That is why soo many people flash Unbranded/Unlocked Open Roms... because unlocked phones have, in the past, gotten updates first and factory unlocked phones / roms dont come with Bloatware / carrier rubbish apps installed ..
Remember.. Just READ everything
Hope this helps
Click to expand...
Click to collapse
Hi....i seem of got myself in a pickle.
I read countless amounts of guides and watch loads of videos but still not gone right. (Phone isn't broken thankfully)
Basically I do everything guides tell me, but it's when I press start on odin the problem happens. It doesn't fail but it doesn't progress....on the text box it stops at a point that says Nand START (something like that) but doesn't get past that point....i sat for an hour the first time I tried it and 30 mins every time after that. Another thing it does is at the top where you get the green loading bar....that part goes white and says something like select Partition (not near my pc at the mo and when I was with the pc my wife had my phone, so couldn't take a photo)
I have 3 solutions that could be causing the problem but I just want to get a second opinion.
1. I read everywhere about device drivers and I was under the impression that they downloaded automatically when I plugged the phone to the pc....is there secondary drivers I need to download (sorry for the basic question)
2. My odin wasn't the latest version....i was using odin 3.09 and now there is odin 3.13 (I think) will using the latest version stop this problem.
3. I wonder if my antivirus is blocking it....do antivirus's ever get in the way of flashing firmware.
Hope some can help before tonight

Owenboy89 said:
Hi....i seem of got myself in a pickle.
I read countless amounts of guides and watch loads of videos but still not gone right. (Phone isn't broken thankfully)
Basically I do everything guides tell me, but it's when I press start on odin the problem happens. It doesn't fail but it doesn't progress....on the text box it stops at a point that says Nand START (something like that) but doesn't get past that point....i sat for an hour the first time I tried it and 30 mins every time after that. Another thing it does is at the top where you get the green loading bar....that part goes white and says something like select Partition (not near my pc at the mo and when I was with the pc my wife had my phone, so couldn't take a photo)
I have 3 solutions that could be causing the problem but I just want to get a second opinion.
1. I read everywhere about device drivers and I was under the impression that they downloaded automatically when I plugged the phone to the pc....is there secondary drivers I need to download (sorry for the basic question)
2. My odin wasn't the latest version....i was using odin 3.09 and now there is odin 3.13 (I think) will using the latest version stop this problem.
3. I wonder if my antivirus is blocking it....do antivirus's ever get in the way of flashing firmware.
Hope some can help before tonight
Click to expand...
Click to collapse
Hi again everyone.
I feel like I am talking to myself here. I have managed to sort it.
I downloaded some secondary device drivers for her phone and then update odin to, Odin v3.12.7 and it worked first time.
I also used the original charging cable instead of the official charging cable for the gear 360 camera.
To restore her data, I backed up to samsung cloud in the settings, signed her in and restored the date I backed up....didn't originally think it would be any good but I am impressed.
Result is I have a phone that has wifi calling and I read somewhere that if you take the SIM out of your phone when you download the firmware it doesn't SIM lock the phone.....and it seems to have worked. (Not sure how true it is or if I was just lucky)
Hope this thread helps, I want to cover a few different things in it and learn something on the way.
(Thanks to the person that commented and supplied most of the info in this thread)
#happywifehappylife

Hi everyone.......again.
My last post I promise.
I wrote a bit of a guide for myself for when I need to do this again. I thought would post it here so people can see it and use it if they wish.
(The notes before the method is apart of my guide. Hope it all helps)
Notes Before The Method
the cable you are using to connect to the pc should be the original charging cable. (If you don't have the original then use the one your using and see if it works but try to find a official Samsung charging cable)
Your phone needs to be at least at 60% battery.
Older phones sometimes don't work with newer versions of Odin so if this is happening download a older version.
If it's a new phone and you want to personalize it from scratch then no need to back up and restore any data.
After removing your memory card, plug it into your computer using a memory card extension and copy photos to your computer. Just in case the phone formats the memory card when entered back in to the phone, after the firmware is installed.
Method
1. Go to Sammobile via Google chrome in incognito mode. (If you don't do this they will re-direct you to a sign up page, everytime you press download)
2. Download Firmware, find this by picking the lastest firmware thats with your network and match the Baseband version or the last part of build number. (found in system info in the settings)
3. Install the latest version of Odin and install secondary device drivers on your pc/Laptop.
4. (On your mobile) back up your data in the samsung cloud.
Setting>Cloud and Accounts>Samsung Cloud>Backup settings> Back up.
If you have a memory card, move all your photos ect, to it and remove it from your phone.
5. Go into setting and tap build number 7 times to unlock developer options. After unlocking it, enter developer options and enable usb debugging.
Setting>developer options>USB Debugging.
6. Once the firmware file has stopped downloading on your pc extract it and send send it to your Downloads File.
7. Open Odin and load each part of firmware in the right box e.g. AP with AP, BL with BL, CSC with CSC ect (Do not load up Home CSC this is used for when your moving a branded device to another brand, E.g. EE to 3)
8. Before you plug your phone up to the computer. Turn your phone off and enter Odin mode(Download mode). Each device has a different way of doing this so just google how to do it on your specific device.
9. Once your phone is in download mode plug it into the computer and press start. This should take a few minutes but some files may take longer.
10. Once the Odin confirms the process is done, by showing the pass sign unplug your phone and turn it on. (First time you turn it on May take a minute or two to load. )
11. Enter your google email and password, and restore all your data on google.
12. Then enter your Samsung user and password, after that press restore and choose the date you backed up on before you flashed your phone (at point 4)
13. Enjoy....your all done.