Anyone out there willing to help guide me through the process of getting the retail mode removed form a samsung galaxy s5? Of course Im willing to compensate you for your time if we can get it to work.
Ive got no experience with Rom's and or installing a rom and the basic passwords have not worked on getting the software removed. Any help would be appreciated.
PhoneDoctor1
Which S5 model have you got?
Make a free account on sammobile dot com (Links are not allowed here)
Type your model S5 into the firmware section and download a ROM
Grab ODIN 3.09 or later (Easy to find with a quick google)
Extract the ROM from the zip, should end up with .MD5 file
Install Samsung drivers (Easy to find with a quick google or Installing KIES3 will also install them)
Put phone into download mode (Power off, then hold Vol down & Home & power, release when the warning appears and hit volume up when asked)
Connect phone to PC USB and wait for drivers to complete installing
Load .MD5 ROM into AP or PDA section of ODIN
Make sure only 'F.Reset Time' and 'Auto Reboot' options are selected in ODIN
Hit START on ODIN and wait for it to complete
All being well, your phone should reboot into the ROM, take a while for first boot, especially if you flash a Lollipop ROM (give it 15 mins+)
Some people find it hangs on first boot, and need to boot into recovery mode and factory reset after flashing the ROM
Same results.
*Detection* Thank you so much for your prompt response and help with this. Unfortunately the steps you provided didn't work for me. I was able to Get Odin, download the correct ROM, drivers, and everything. I installed the ROM on the phone (Took 4 minutes) though ODIN and it stated that it succeeded. Phone restarted and retail mode was back on the phone.
Any other options to get it removed?
PhoneDoctor1
Some instructions here on how to disable retail mode
http://www.naldotech.com/how-to-disable-exit-galaxy-s5-demo-live-unit-retail-mode/
How to delete, disable and exit Demo Live Unit Retail Mode on the Samsung Galaxy S5
1. The first thing to do is to disable the retail mode of the firmware.
2. Go to the app drawer and open an app called Samsung Retail.
3. Go to Configuration Settings and enter the password 5444 to unlock it.
4. Then uncheck “Disable the factory reset” and enter the following password M729Q16K8546.
5. Turn your Samsung Galaxy S5 off and boot into Recovery.
6. Go to Wipe data & factory reset and press OK.
7. The phone will reset and all the applications will get removed.
8. Flash a stock firmware with ODIN (tutorial).
There must be something different about this retail mode. It looks different than the others shown in previous posts or youtube videos. I can't seem to disable the app and the passwords don't work. Ive seen a few youtube videos on how to remove it and the one I see doesn't look like the one thats on this galaxy s5. Any other workaround to your knowledge?
PhoneDoctor1
Not that I know of off hand, I`ll post back here if I find anything, it might be quicker to take it to a phone shop and ask them to disable it for you
PhoneDoctor1 said:
There must be something different about this retail mode. It looks different than the others shown in previous posts or youtube videos. I can't seem to disable the app and the passwords don't work. Ive seen a few youtube videos on how to remove it and the one I see doesn't look like the one thats on this galaxy s5. Any other workaround to your knowledge?
PhoneDoctor1
Click to expand...
Click to collapse
Which version S5 have you got?
Just noticed this thread for the G900X to disable Retail Mode
http://forum.xda-developers.com/showthread.php?t=2733083
Ive got the t-mobil version here in the states. I did see that thread before I posted mine but that wont enable me to make calls. It will most likely turn the phone into a wifi capable phone without cell service.
Sorry, I meant which model S5, mine is the G900F
I take it you bought the phone second hand? Unless someone else can help I think taking it in for repair would be the best bet if those tutorials are not working
I would like to know how you got into retail mode!
And, of course, your model. Its in the system informations.
I had a similar issue with a laptop once (purchased the display model).....
The only thing that fixed it was formatting the hard drive and re installing everything from the recovery discs......
I guess the equivalent for Android would be to flash a PIT file (I think this will reformat the memory) then the firmware (both) with odin........
If you DO go this route, be EXTREMELY careful to flash the CORRECT pit file as flashing the wrong pit will irrevocably brick your phone.........
Sent from my rooted kn0x0 stocKK SM-G900F S5
I appreciate the help and responses. From my understanding the retail mode can not be removed. It seems that Samsung specially designed these phones with software that can't just easily be flashed.
Successfully removed Retail Mode from AT&T Samsung Galaxy S5 SM-G900A
PhoneDoctor1 said:
I appreciate the help and responses. From my understanding the retail mode can not be removed. It seems that Samsung specially designed these phones with software that can't just easily be flashed.
Click to expand...
Click to collapse
I had just about given up on a straightforward fix, and was about to resort to some major firmware manipulation that would have likely led me to all sorts of confusion. It turns out the password was "rethink" as is listed in multiple places across the web. (AT&T SM-G900A Galaxy S 5) It is applied to the Samsung Retail Mode app which has a "burger" icon in top right corner of the screen that must be selected first to lead towards password entry. This is not the "Retail Experience" app, but the other similar one. Once the Retail Mode app is uninstalled, there are intuitive steps leading to uninstalling of the "Retail Experience" one next, with no new passwords.
Related
Hello everyone,
My phone just recently started having this issue, where the screen freezes when it first turns on. If I try plugging it in to charge, it freezes on the battery charging screen; there is no animation that indicates that it is charging. I've tried going into recovery mode but all there is is something that says "MMC: mmc_read fail Movinand Checksum Confirmation Fail". I can, however, go into download mode, where I can install a custom OS. It seems that this screen functions fine and my instinct is telling me that if I want to continue to use my phone, I'll have to reinstall the firmware. I'm not interested in installing a custom OS but I do just want to get my phone back. I did not do anything to my phone, I turned it off for a flight and when I landed, I turned it on and it started freezing when I tried using it. I was able to send out a few texts before it froze and I had to restart the phone but then it just wouldn't get past the Samsung Galaxy S5 screen.
Thank you for your help.
If I understand correctly your phone is not rooted ? Then only a factory reset will help you I think ...
In my experience, a factory reset will fix that, but wipe data also. On S3 and Note 3, I have Odin'ed stock firmwares over stock firmwares before and it has retained the data while fixing the problem. You may want to look into this method.
BCSC said:
In my experience, a factory reset will fix that, but wipe data also. On S3 and Note 3, I have Odin'ed stock firmwares over stock firmwares before and it has retained the data while fixing the problem. You may want to look into this method.
Click to expand...
Click to collapse
I've sort of looked into the Odin method but I'm still slightly confused and a little reluctant do so without clear instructions. Do you know of a particularly good tutorial that could help me with this? I do want to retain some of the data.
Thank you for your help, if this doesn't work, I'll probably just factory reset it.
allsheneedewassome said:
I've sort of looked into the Odin method but I'm still slightly confused and a little reluctant do so without clear instructions. Do you know of a particularly good tutorial that could help me with this? I do want to retain some of the data.
Thank you for your help, if this doesn't work, I'll probably just factory reset it.
Click to expand...
Click to collapse
Its quite simple. Donwload your region firmware from sammobile or from the firmware thread, open odin 3.07 (later versions have issues). Don't change any settings but do make sure "repartition" is NOT checked as this may cause brick. Click on "pda". Select the firmware you just downloaded. Now boot phone into download mode, I believe its vol down home and power pressed altogether. Dismiss the warning and connect your phone. Finally once it says "added" press start. Thats it, good luck!
@non4 said:
Its quite simple. Donwload your region firmware from sammobile or from the firmware thread, open odin 3.07 (later versions have issues). Don't change any settings but do make sure "repartition" is NOT checked as this may cause brick. Click on "pda". Select the firmware you just downloaded. Now boot phone into download mode, I believe its vol down home and power pressed altogether. Dismiss the warning and connect your phone. Finally once it says "added" press start. Thats it, good luck!
Click to expand...
Click to collapse
This is correct.
Hello everyone, i'm new to XDA forums and hopefully i'll find a solution to my problem here.
I am always stuck on EDGE (E) when it comes to mobile network usage, regardless of where i am. I've tried using my SIM card in another phone and it instantly goes to HSPA+ (H+).
My phone is pretty much new and i didnt mess much with it as i dont know enough about phones to play with them in that way, it has been like this ever since i took it. There is one thing that i think its most likely causing it and that is that my phone was rooted when i bought it. >>> I dont know anything about advantages/disadvantages of rooted phone and if this may or may not cause any problems but i've never had this kind of an issue before with any phone and none of my phones before were rooted. <<<
I wanted to try and unroot the device by using Mobile ODIN Pro from Google Play Store but i stopped before i even started as the PRO version that is needed for this to be done says my device is not supported and therefore i cannot buy it. I had the Lite version and there are like 4-5 features that require PRO version in order for them to be used.
I have a GT-I9505 running on 4.4.2 android version, i'm from Serbia with mts as provider for what it matters.
P.S. My network mode is set to WCDMA/GSM (auto connect), if i change it to WCDMA only i lose network completely and if i put GSM only its again back on EDGE.
Any help will be greatly appreciated.
Let's make sure you actually have an I9505. Try to enter download mode (shut the S4 off, then hold volume down, home, and power). The model at the top of the screen with the green Android on it is the actual model of your S4.
Strephon Alkhalikoi said:
Let's make sure you actually have an I9505. Try to enter download mode (shut the S4 off, then hold volume down, home, and power). The model at the top of the screen with the green Android on it is the actual model of your S4.
Click to expand...
Click to collapse
It is I9505 as i said. How do i leave this mode now? It says "Downloading... Do not turn off target !!" across the screen. :v
I strongly suggest you check that attitude of yours. Just because you said it doesn't mean it actually is. There have been too many instances of counterfeit phones as well as phones from another carrier being installed with I9505 ROMs and IMEI numbers and sold to the unsuspecting. The question is thus a valid one.
If you're looking to exit download mode, simply pull the battery. If you're looking to reinstall a stock ROM, then you're on the right screen. Simply connect your S4 to your computer and use the desktop version of Odin to flash the stock ROM. Now, how do you know which stock ROM you should be using? Simply tell us your carrier.
Strephon Alkhalikoi said:
I strongly suggest you check that attitude of yours. Just because you said it doesn't mean it actually is. There have been too many instances of counterfeit phones as well as phones from another carrier being installed with I9505 ROMs and IMEI numbers and sold to the unsuspecting. The question is thus a valid one.
If you're looking to exit download mode, simply pull the battery. If you're looking to reinstall a stock ROM, then you're on the right screen. Simply connect your S4 to your computer and use the desktop version of Odin to flash the stock ROM. Now, how do you know which stock ROM you should be using? Simply tell us your carrier.
Click to expand...
Click to collapse
There is no attitude mate, i just told you that it is what i earlier wrote after checking it the way you told me to. Nothing more than that.
By carrier you mean my mobile provider or whatever its called? If so, Telekom Srbija (mts).
The latest ROM for your device is here. The page gives instructions on how to use the file as well as download links.
Few questions:
Will that install lollipop? If yes, is lollipop worth getting? I recently heard opposite while i was actually trying to get it. It's the only opinion that i can sort of take in count so idk if its true or not.
Will it fix the problem?
"Add the firmware file to AP / PDA"
- What is(are) AP / PDA?
"Make sure re-partition is NOT ticked"
- This is an option in Odin i suppose, if it is disregard it. If not please explain.
Edit: I've downloaded PC version of Odin and i only see AP among other boxes for files to be added. Is PDA another name for it or..?
Should i also check the little box next to where it says AP? (picture below)
There's another zip file in odin folder "S1PlugIn.bundle_141117", i suppose i shouldnt touch this as you havent mentioned it?
P.S. Sorry if my questions appear stupid but i'm facing all of this for the first time and i'm just being extra careful as i dont want to mess up something.
This is the latest ROM for your device, so it will install Android 5.0.1. I believe it to be worthwhile, but if you want Android 4.4.2 instead a download is also available for it at the same site. Will it fix the problem? It should. If it doesn't then a hardware problem is more likely.
AP and PDA are two different names for the same thing. Older versions of Odin used PDA. Checking the box next to it won't hurt, and that other file isn't something you touch.
So i need to turn off my phone, go to download mode, connect pc and phone with USB, wait for some "blue sign" from ODIN and then add the file and run Start? Re-partition is disabled by default.
Everything went smooth but the problem persists... I even changed the network mode to the new options that i got (which includes 4g if i'm not wrong).
What to do?
P.S. 5.0.1 runs really slow for me, takes double more RAM than 4.4.2 and it almost filled up my whole phone memory
Try a different sim in your phone. if you still don't get 4g then you probably have a hardware failure.
Lennyz1988 said:
Try a different sim in your phone. if you still don't get 4g then you probably have a hardware failure.
Click to expand...
Click to collapse
Aye... Still the same even with another sim card. I guess its hardware problem in the end. Any idea what would it cost to fix, if you know what the problem could be at all?
Hi guys,
I got my Note 4 SM-N910F and installed latest update ROM from sammobile.com, respectively I've upgraded it from 4.4.4 to 5.1.1.
After reboot, I got the following message when restarted:
"This device is locked because of an abnormal factory reset. Sign in to the Samsung account that you have already signed in to on this device to confirm that it belongs to you."
Shortly: Samsung Reactivation Lock Activated
I've tried my Samsung account, on the web it logs in successfully, on my phone it doesn't let me login.
What should I do?
(phone is never locked, bought from Cosmote Romania, now Telekom Romania)
Thanks.
Samsung Reactivation Lock Activated - [ SOLVED ]
Hi guys,
I've succesfully deactivated the Samsung Reactivation Lock on my Samsung Note 4 SM-N910F - Android Lollipop 5.1.1. !!!
I'll tell you in detail how I did it. After 5 hours of data mining and documenting myself, I've gathered all the necessary data to do it.
Statement: On Samsung Note 4 with Lollipop 5.1.1, the Samsung Reactivation Lock cannot be deactivated!
In order to do that you need to downgrade it to KitKat 4.4.4. (thanks to brayhanrd for coming up with this downgrade-first idea in this post: http://forum.xda-developers.com/galaxy-s5/help/reactivation-lock-root-custom-rom-t3097964#post60511431
It can be done following these simple steps:
1) Downgrade the Samsung Note 4 software version from Lollipop 5.1.1 to KitKat 4.4.4 - using the stock 4.4.4 version specifically designed for your phone which can be downloaded from www.sammobile.com.
(Obs: if it was purchased from Verizon then THAT's the version you need to get it. I'm telling you this to avoid a lot of downgrade failures because of mismatch files and Odin writing errors, believe me, I read a lot about it today! )
- Downgrading from Lollipop to KitKat instructions and all the necesarry files to do it (e.g. Odin) can be found here: http://www.androidexplained.com/galaxy-note-4-how-to-downgrade-to-android-4-4-4-kitkat/ (thanks to Doug for documenting this )
If downgrade was successful, it should look like this: http://screencast.com/t/S9ONzxqPvaG
2) A work around to be able to turn off (deactivate) the Samsung Reactivation Lock can be found on this YouTube video: https://www.youtube.com/watch?v=U23TdbqJehA
- Long story short, the video emphasize what you need to do to get into the phone's Samsung Account, trick the already locked account and re-register yourself with a new (yet existing) Samsung account, which later on, will be seen by Samsung as the phone's default account, thus allowing yourself to register with it. What this guy's doing, basically is using the Text to Speech Samsung update to get logged in to the Samsung Galaxy Apps with this new Samsung account he created (or already had). From there, he gets back to the first phone setup steps and use this Samsung account which will be recognized by Samsung Reactivation Lock as being the default account (because he already signed-in with it into the Samsung Galaxy Apps) and voila, passed the protection.
3) Turn off the Samsung Reactivation Lock: After you tricked the Samsung Lock screen and passed over it reaching the classic, well known home screen, go to -> Settings -> Security -> and find the "Reactivation Lock" option and UNCHECK it! It will ask again for your Samsung account password, insert it and - ONLY THEN - you will have turned off the Samsung Reactivation Lock.
4) Upgrade back to Lollipop 5.1.1: same instructions here, first, upgrade only with stock image made specifically for your Note 4 version, to ba taken from www.sammobile.com or any other respectable place.
If upgrade was successful, it should look like this: http://screencast.com/t/U0BgITnrMmzi
Voila! you have a fully functional Note 4 phone again!
I hope this post will help you spare those 5 hours I used for reseaching these things!
ChiefRA
Not possible to downgrade 5.1.1 to 4.4.4
Funny you say you downgraded from 5.1.1 to 4.4.4 because everywhere I've read the consensus is the new bootloader makes this impossible.
Re: http://forum.xda-developers.com/note-4-sprint/help/downgrading-5-1-1-t3206848/post62923032
"If you upgraded your boot loader past OB7 (OE1, OF5 or OG5) You can no longer downgrade."
I tried your intructions anyway with the proper stock rom for my SM-N910P with 5.1.1 (OG5) and no dice. Odin failed right away.
Thanks anyway!
ChiefRA said:
Hi guys,
I've succesfully deactivated the Samsung Reactivation Lock on my Samsung Note 4 SM-N910F - Android Lollipop 5.1.1. !!!
I'll tell you in detail how I did it. After 5 hours of data mining and documenting myself, I've gathered all the necessary data to do it.
Statement: On Samsung Note 4 with Lollipop 5.1.1, the Samsung Reactivation Lock cannot be deactivated!
In order to do that you need to downgrade it to KitKat 4.4.4. (thanks to brayhanrd for coming up with this downgrade-first idea in this post: http://forum.xda-developers.com/galaxy-s5/help/reactivation-lock-root-custom-rom-t3097964#post60511431
It can be done following these simple steps:
1) Downgrade the Samsung Note 4 software version from Lollipop 5.1.1 to KitKat 4.4.4 - using the stock 4.4.4 version specifically designed for your phone which can be downloaded from www.sammobile.com.
(Obs: if it was purchased from Verizon then THAT's the version you need to get it. I'm telling you this to avoid a lot of downgrade failures because of mismatch files and Odin writing errors, believe me, I read a lot about it today! )
- Downgrading from Lollipop to KitKat instructions and all the necesarry files to do it (e.g. Odin) can be found here: http://www.androidexplained.com/galaxy-note-4-how-to-downgrade-to-android-4-4-4-kitkat/ (thanks to Doug for documenting this )
If downgrade was successful, it should look like this: http://screencast.com/t/S9ONzxqPvaG
2) A work around to be able to turn off (deactivate) the Samsung Reactivation Lock can be found on this YouTube video: https://www.youtube.com/watch?v=U23TdbqJehA
- Long story short, the video emphasize what you need to do to get into the phone's Samsung Account, trick the already locked account and re-register yourself with a new (yet existing) Samsung account, which later on, will be seen by Samsung as the phone's default account, thus allowing yourself to register with it. What this guy's doing, basically is using the Text to Speech Samsung update to get logged in to the Samsung Galaxy Apps with this new Samsung account he created (or already had). From there, he gets back to the first phone setup steps and use this Samsung account which will be recognized by Samsung Reactivation Lock as being the default account (because he already signed-in with it into the Samsung Galaxy Apps) and voila, passed the protection.
3) Turn off the Samsung Reactivation Lock: After you tricked the Samsung Lock screen and passed over it reaching the classic, well known home screen, go to -> Settings -> Security -> and find the "Reactivation Lock" option and UNCHECK it! It will ask again for your Samsung account password, insert it and - ONLY THEN - you will have turned off the Samsung Reactivation Lock.
4) Upgrade back to Lollipop 5.1.1: same instructions here, first, upgrade only with stock image made specifically for your Note 4 version, to ba taken from www.sammobile.com or any other respectable place.
If upgrade was successful, it should look like this: http://screencast.com/t/U0BgITnrMmzi
Voila! you have a fully functional Note 4 phone again!
I hope this post will help you spare those 5 hours I used for reseaching these things!
ChiefRA
Click to expand...
Click to collapse
eltrkbrd said:
Funny you say you downgraded from 5.1.1 to 4.4.4 because everywhere I've read the consensus is the new bootloader makes this impossible.
Re: http://forum.xda-developers.com/note-4-sprint/help/downgrading-5-1-1-t3206848/post62923032
"If you upgraded your boot loader past OB7 (OE1, OF5 or OG5) You can no longer downgrade."
I tried your intructions anyway with the proper stock rom for my SM-N910P with 5.1.1 (OG5) and no dice. Odin failed right away.
Thanks anyway!
Click to expand...
Click to collapse
Let me help you further because IT IS POSSIBLE. I've done it! Are you sure you read my thread correctly where I've stated that:
...using the stock 4.4.4 version specifically designed for your phone
Click to expand...
Click to collapse
You need to download a stock version of 4.4.4. specifically made for your phone version, model and mobile operator.
maybe for the sm-n910f but not the sm-n910p
I greatly appreciated your response, I spent almost the entire day yesterday working on this with no success.
Just so you know, I did in fact download the stock rom made specifically for my sm-910p, here:
http://androidromupdate.com/sprint-galaxy-note-4-sm-n910p-stock-firmware/
I'm on N910PVPU4COG5 now which is Lolipop 5.1.1 now.
I tried downgrading to N910PVPU1ANK2 Kitkat 4.4.4 and no go.
That is definitely the stock firmware for my device.
I did a factory reset & wiped cache first, then tried flashing with odin and after a successful md5 check it failed.
Not sure but maybe because you had the international version the bootloader is different?
But again, I'm sure it didn't work at that seems to be the consensus everywhere else too. that once you go above OB7 there's no going back on the N910P.
ChiefRA said:
Let me help you further because IT IS POSSIBLE. I've done it! Are you sure you read my thread correctly where I've stated that:
You need to download a stock version of 4.4.4. specifically made for your phone version, model and mobile operator.
Click to expand...
Click to collapse
I would suggest to not give up just yet.
Verify the following:
a) From the page you gave me http://androidromupdate.com/sprint-galaxy-note-4-sm-n910p-stock-firmware/ - I know it sais there It cannot be done, just ignore that - did you installed the Drivers on your computer before you plugged in your phone?
b) Did you tried both 4.4.4. versions available?
c) Did you tried multiple times to flash it? As it opten happens to crash 1,2,3 time until you get it done right. (in between the flashes, try reconnecting the phone to the computer and restarting it).
Try Try Try Again...
Thanks for your advice. I would like to downgrade and so haven't given up just yet; you gave me hope (even a shot in the dark)!
ChiefRA said:
I would suggest to not give up just yet.
Verify the following:
a) From the page you gave me http://androidromupdate.com/sprint-galaxy-note-4-sm-n910p-stock-firmware/ - I know it sais there It cannot be done, just ignore that - did you installed the Drivers on your computer before you plugged in your phone?
A: Yes, I have installed the drivers on my computer and successfully flashed with odin before and my com port is detected, everything is working on that end. However, I read today someone said they could only use odin 3.10 to flash without it failing so I will try that too.
b) Did you tried both 4.4.4. versions available?
A: No, I'm going to try the older version of KitKat 4.4.4 next, N910PVPU1ANIE
c) Did you tried multiple times to flash it? As it opten happens to crash 1,2,3 time until you get it done right. (in between the flashes, try reconnecting the phone to the computer and restarting it).
A: OK, I will try this and report back.
Click to expand...
Click to collapse
FYI regarding being unable to downgrade from 5.1.1 to 4.4.4:
http://forum.xda-developers.com/not...ding-5-1-1-t3206848/post62923032#post62923032
http://forum.xda-developers.com/showpost.php?p=61959946&postcount=157
http://forum.xda-developers.com/showpost.php?p=61803843&postcount=151
I'm not giving up just yet!
hi guys!! im having the same issue with my note 4 n910u.. just flashed to 5.1.1 and blocked bootloader.. i dont know what to do..!! the phone was with my samsung account and the device appers to be OFF when i check samsungs web.
someone?? any solution??
hi guys, same problem here, n910c 5.1.1 can't downgrade, any solve?
Samsung Reactivation Bypass Alternative
Hi all,
This is my first posting and reply to a thread. Hope all is doing well.
After many many many attempts to either bypass or deactivate Knox's reactivation lock.. I was finally successful. I"m sure you can imagine how i was jumping up and down..
Any who, here's how i did it:
What you need:
1- An OTG Cable
2- A USB flash drive
3- Samsung Google bypass
First thing I did was factory reset my Verizon Note 4 from the recovery mode.
If you have another android phone available, that would be useful. Take the OTG cable plus it into the extra android phone and plug in your USB flash drive. It will either pop up or ask you to reformat the drive. You want to make sure that the USB flash drive is compatible with android devices. If you don't have an extra phone, reformat your USB flash drive using CMD (format Fat32.)
After that's completed, plug your flash drive into your laptop/desktop and drag the file you downloaded (Samsung google bypass) to your flash drive.
IF YOU CAN'T BEAT THEM, JOIN THEM!
Power on your android phone, after it turns on, plug your OTG cable into your phone and attach your USB flash drive. Wait a few seconds so your phone can recognize the new hardware. A folder from the flash drive should pop. Now run the Samsung Google Bypass file. This will take you to the settings on the phone. Connect to your WiFi.
Click on the Security tab and check "Unknown Sources" and then click ok.
In the same tab> Click on where is says "Go to website". That will open a browser. If for any reason you don't have that option in that tab, in the settings options, click on "Accounts" and add your gmail account to the phone. Go back to the settings options and click on your Google account. We need to get this to the browser.
After clicking on your account, scroll down to where is says "Smart Lock for passwords", go ahead an open that up.
You will see "Google Account" - Click on it. That should take you to a browser.
(If for any reason with those option don't take you to a browser, search the settings section to find a way. THERE IS ALWAYS A WAY)
Now we are almost done!
Download Aptoide> It will ask you all the prompts to install> after its done, click on open.
Download Knox> it will ask you to upgrade> go ahead and upgrade it> after thats done, open up the knox app and create a new account. This will now save to your phone.
You can unplug the OTG cable and restart your phone. But before doing so, make sure that account is was successfully created.
You will go back to set up wizard. Go ahead and set up your phone. You should not have any problems now.
Hope this works for you as it did for me.
Thanks for reading
---------- Post added at 03:48 PM ---------- Previous post was at 03:41 PM ----------
Forgot to mention, when you download the Samsung Google bypass, make sure its a APK and if its in a rar file, unzip it.
QueenElizabethMaseda said:
Hi all,
This is my first posting and reply to a thread. Hope all is doing well.
After many many many attempts to either bypass or deactivate Knox's reactivation lock.. I was finally successful. I"m sure you can imagine how i was jumping up and down..
Any who, here's how i did it:
What you need:
1- An OTG Cable
2- A USB flash drive
3- Samsung Google bypass
First thing I did was factory reset my Verizon Note 4 from the recovery mode.
If you have another android phone available, that would be useful. Take the OTG cable plus it into the extra android phone and plug in your USB flash drive. It will either pop up or ask you to reformat the drive. You want to make sure that the USB flash drive is compatible with android devices. If you don't have an extra phone, reformat your USB flash drive using CMD (format Fat32.)
After that's completed, plug your flash drive into your laptop/desktop and drag the file you downloaded (Samsung google bypass) to your flash drive.
IF YOU CAN'T BEAT THEM, JOIN THEM!
Power on your android phone, after it turns on, plug your OTG cable into your phone and attach your USB flash drive. Wait a few seconds so your phone can recognize the new hardware. A folder from the flash drive should pop. Now run the Samsung Google Bypass file. This will take you to the settings on the phone. Connect to your WiFi.
Click on the Security tab and check "Unknown Sources" and then click ok.
In the same tab> Click on where is says "Go to website". That will open a browser. If for any reason you don't have that option in that tab, in the settings options, click on "Accounts" and add your gmail account to the phone. Go back to the settings options and click on your Google account. We need to get this to the browser.
After clicking on your account, scroll down to where is says "Smart Lock for passwords", go ahead an open that up.
You will see "Google Account" - Click on it. That should take you to a browser.
(If for any reason with those option don't take you to a browser, search the settings section to find a way. THERE IS ALWAYS A WAY)
Now we are almost done!
Download Aptoide> It will ask you all the prompts to install> after its done, click on open.
Download Knox> it will ask you to upgrade> go ahead and upgrade it> after thats done, open up the knox app and create a new account. This will now save to your phone.
You can unplug the OTG cable and restart your phone. But before doing so, make sure that account is was successfully created.
You will go back to set up wizard. Go ahead and set up your phone. You should not have any problems now.
Hope this works for you as it did for me.
Thanks for reading
Click to expand...
Click to collapse
queenelizabethmaseda said:
hi all,
this is my first posting and reply to a thread. Hope all is doing well.
After many many many attempts to either bypass or deactivate knox's reactivation lock.. I was finally successful. I"m sure you can imagine how i was jumping up and down..
Any who, here's how i did it:
What you need:
1- an otg cable
2- a usb flash drive
3- samsung google bypass
first thing i did was factory reset my verizon note 4 from the recovery mode.
If you have another android phone available, that would be useful. Take the otg cable plus it into the extra android phone and plug in your usb flash drive. It will either pop up or ask you to reformat the drive. You want to make sure that the usb flash drive is compatible with android devices. If you don't have an extra phone, reformat your usb flash drive using cmd (format fat32.)
after that's completed, plug your flash drive into your laptop/desktop and drag the file you downloaded (samsung google bypass) to your flash drive.
If you can't beat them, join them!
power on your android phone, after it turns on, plug your otg cable into your phone and attach your usb flash drive. Wait a few seconds so your phone can recognize the new hardware. A folder from the flash drive should pop. Now run the samsung google bypass file. This will take you to the settings on the phone. Connect to your wifi.
Click on the security tab and check "unknown sources" and then click ok.
In the same tab> click on where is says "go to website". That will open a browser. If for any reason you don't have that option in that tab, in the settings options, click on "accounts" and add your gmail account to the phone. Go back to the settings options and click on your google account. We need to get this to the browser.
After clicking on your account, scroll down to where is says "smart lock for passwords", go ahead an open that up.
You will see "google account" - click on it. That should take you to a browser.
(if for any reason with those option don't take you to a browser, search the settings section to find a way. There is always a way)
now we are almost done!
Download aptoide> it will ask you all the prompts to install> after its done, click on open.
Download knox> it will ask you to upgrade> go ahead and upgrade it> after thats done, open up the knox app and create a new account. This will now save to your phone.
You can unplug the otg cable and restart your phone. But before doing so, make sure that account is was successfully created.
You will go back to set up wizard. Go ahead and set up your phone. You should not have any problems now.
Hope this works for you as it did for me.
Thanks for reading
---------- post added at 03:48 pm ---------- previous post was at 03:41 pm ----------
forgot to mention, when you download the samsung google bypass, make sure its a apk and if its in a rar file, unzip it.
Click to expand...
Click to collapse
no job in 5.1.1 ok, not open browser or other to otg in or sidesync or other, 5.1.1 and 6.0 its no possible downgrade and not possible unlock account samsung
sm-n910p blocked
Hi guys,
I got my Note 4 SM-N910p and installed latest update ROM from sammobile.com, respectively I've upgraded it from 5.1.1. to 6.0.1.
After reboot, I got the following message when restarted:
"This device is locked because of an abnormal factory reset. Sign in to the Samsung account that you have already signed in to on this device to confirm that it belongs to you."
Shortly: Samsung Reactivation Lock Activated
I've tried my Samsung account, on the web it logs in successfully, on my phone it doesn't let me login.
What should I do?
Note 4 (N910C)
MY phone n910c is running to 6.0.1 Android Version.But i want to costomized Rom to install it.No Recovery is installed because it binary blocked by Reactivation Lock.How is it possible to Turn it off. I tried best but no problem solved.
Help me out to turn off reactivation lock.
Yo, so glad I found this thread. 4.4.4 saved my note 4
I have been trawling the internet for literally hours.
This is my final hope before I get really desperate with this device.
I bought a Samsung Galaxy Edge+ online as a demo unit so I could use it as a glorified tablet,
since it was a demo unit it had demo software which I tried to remove using the 5444 password
trick on the retail software to no avail. So I decided to root the phone using Odin and the
SM-G928 F/I/C/K/S software as i couldn't find the particular software for this phone anywhere.
This worked but every time I booted the phone it would give me the 'KERNEL IS NOT SEANDROID ENFORCING'
on the top left of the device which I promptly ignored and continued to use the device, I downloaded
root check which said my device was rooted and then I downloaded system app uninstaller to try remove all the trial
software, which unfortunately didn't work. I then attempted a hard reset, which also didn't work and just
rebooted the device, finally i decided to download Flashify and TWRP recovery to try and delete the trial software
from there. At this point I was just messing around with the phone when I noticed a thread that said i needed
titanium backup to fully delete the software, so i rebooted the phone and it has been stuck on the bootup screen
ever since, I have tried several methods to get it to work including re-flashing the software onto it,
(the SM-G928F one I mean) but i simply cannot find the correct one for my device.
Any help would be greatly appreciated :good::good::good::good:
The device is running 5.1.1
I am not sure of the kernel or anything like that as I am quite noobish.
re: phone issues
MeMyPhoneAndI said:
I have been trawling the internet for literally hours.
This is my final hope before I get really desperate with this device.
I bought a Samsung Galaxy Edge+ online as a demo unit so I could use it as a glorified tablet,
since it was a demo unit it had demo software which I tried to remove using the 5444 password
trick on the retail software to no avail. So I decided to root the phone using Odin and the
SM-G928 F/I/C/K/S software as i couldn't find the particular software for this phone anywhere.
This worked but every time I booted the phone it would give me the 'KERNEL IS NOT SEANDROID ENFORCING'
on the top left of the device which I promptly ignored and continued to use the device, I downloaded
root check which said my device was rooted and then I downloaded system app uninstaller to try remove all the trial
software, which unfortunately didn't work. I then attempted a hard reset, which also didn't work and just
rebooted the device, finally i decided to download Flashify and TWRP recovery to try and delete the trial software
from there. At this point I was just messing around with the phone when I noticed a thread that said i needed
titanium backup to fully delete the software, so i rebooted the phone and it has been stuck on the bootup screen
ever since, I have tried several methods to get it to work including re-flashing the software onto it,
(the SM-G928F one I mean) but i simply cannot find the correct one for my device.
Any help would be greatly appreciated :good::good::good::good:
The device is running 5.1.1
I am not sure of the kernel or anything like that as I am quite noobish.
Click to expand...
Click to collapse
First thing to do is to get into STOCK recovery and do a "Factory Data Reset"
or you can boot the phone up and go into "Settings>Backup and Reset" and
select "Factory data reset".
After doing that odin flash the proper S6 Edge+ Lollipop 5.1.1 or the new Marshmallow 6.0 firmware.
You can see the exact model of your G928 phone by going into settings and scroll down to "about"
there you will find the specific model of your phone.
Be sure to ONLY odin flash the correct firmware for your phone's model.
Once you do all the above you will no longer see:
'KERNEL IS NOT SEANDROID ENFORCING'
The only reason you see that is because the phone is rooted.
After odin flashing the proper firmware your phone will no longer be rooted
unless you root the phone again.
Good luck,
Have a great day!
Misterjunky said:
First thing to do is to get into STOCK recovery and do a "Factory Data Reset"
or you can boot the phone up and go into "Settings>Backup and Reset" and
select "Factory data reset".
After doing that odin flash the proper S6 Edge+ Lollipop 5.1.1 or the new Marshmallow 6.0 firmware.
You can see the exact model of your G928 phone by going into settings and scroll down to "about"
there you will find the specific model of your phone.
Be sure to ONLY odin flash the correct firmware for your phone's model.
Once you do all the above you will no longer see:
'KERNEL IS NOT SEANDROID ENFORCING'
The only reason you see that is because the phone is rooted.
After odin flashing the proper firmware your phone will no longer be rooted
unless you root the phone again.
Good luck,
Have a great day!
Click to expand...
Click to collapse
I can't boot the phone up, if I could I would, I can't find the software for this particular model, which is aforementioned SM-G928X,
If you could help me with that, I would appreciate it. The phone is stuck on the Saumsung boot up, it doesn't actually boot up into
the lock screen so I can't do anything with it, if you could help me with link to the SM-G928X firmware that I could use in ODIN
that would be greatly appreciated cause the phone is a paper weight at this point.
I had a moment of madness and decided to do what you said anyway, and I can't factory reset the phone from the recovery menu as it says
its due to security policies or something of that nature, which again I mentioned in the initial thread.
Also to clarify, I can't flash my own firmware because I can't find the firmware anywhere on the internet.
re: firmwares
MeMyPhoneAndI said:
I can't boot the phone up, if I could I would, I can't find the software for this particular model, which is aforementioned SM-G928X,
If you could help me with that, I would appreciate it. The phone is stuck on the Saumsung boot up, it doesn't actually boot up into
the lock screen so I can't do anything with it, if you could help me with link to the SM-G928X firmware that I could use in ODIN
that would be greatly appreciated cause the phone is a paper weight at this point.
I had a moment of madness and decided to do what you said anyway, and I can't factory reset the phone from the recovery menu as it says
its due to security policies or something of that nature, which again I mentioned in the initial thread.
Also to clarify, I can't flash my own firmware because I can't find the firmware anywhere on the internet.
Click to expand...
Click to collapse
I have done a bit of research on your G928X device and I think you are in luck.
Check out this link carefully http://pdadb.net/index.php?m=specs&id=8759&c=samsung_sm-g928x_galaxy_s6_edgeplus_lte-a_samsung_zen
and you will see that the firmware in your phone is identical to many other G928 firmwares as you will see in that link.
Odin flashing any of the ZEN firmwares in that link cannot brick your phone, the worse thing that can happen is that it will not
work. (just like it's not working for you right now).
I would go a head and odin flash the S6 Edge+ G928T firmware which is also the ZEN baseband firmware, there are many S6 Edge+ phones
using the exact same firmware. All Samsung S6 Edge+ firmwares contain the modem but not all of them will be compatible with your
carrier but at least you will be able to boot your phone normally without getting stuck on boot screen or bootlooping to start with.
You can get the G928T firmware from http://sammobile.com OR
https://www.androidfilehost.com/?fid=24499762636004597 (fast download)
Good luck,
Have a great day!
Hi, i just bought a "new" samsung galaxy note 4
product name sm-n910v
I tried to update my phone but this failed. So i did hard reset, and the phone is ofcourse locked with a samsung account. Now i cant get passed this.
I tried to roof the phone with odin but this also fails. I downloaded Odin 3 and installed CF-Auto-Root-trltevzw-trltevzw-smn910v but after i start odin program it takes only a few secounds at it fails. What else can i do? Need some more tricks
mrgluck said:
Hi, i just bought a "new" samsung galaxy note 4
product name sm-n910v
I tried to update my phone but this failed. So i did hard reset, and the phone is ofcourse locked with a samsung account. Now i cant get passed this.
I tried to roof the phone with odin but this also fails. I downloaded Odin 3 and installed CF-Auto-Root-trltevzw-trltevzw-smn910v but after i start odin program it takes only a few secounds at it fails. What else can i do? Need some more tricks
Click to expand...
Click to collapse
Hi so i had a similar problem to this on my note 3.
What I did was
Hard reset and then reboot and when it goes through the initial settings I think on the first page click on accessibility and then in there find language and input you want to go to text to speech and download any language u want and you should then be able to put in your own Samsung account details and then when you go through to the abnormal reset locked page your account you just put on there should be there.
If that doesn't work(which sometimes it doesn't you will want to try again but this time when you go to accessibility you want to try find anything in there that will let you go into a browser like a terms and conditions or click on something like that. Once in a browser search for google play and download a phone settings app and then open the app through google play and go into security settings and disable reactivation. Lock thing
painterdannz said:
Hi so i had a similar problem to this on my note 3.
What I did was
Hard reset and then reboot and when it goes through the initial settings I think on the first page click on accessibility and then in there find language and input you want to go to text to speech and download any language u want and you should then be able to put in your own Samsung account details and then when you go through to the abnormal reset locked page your account you just put on there should be there.
If that doesn't work(which sometimes it doesn't you will want to try again but this time when you go to accessibility you want to try find anything in there that will let you go into a browser like a terms and conditions or click on something like that. Once in a browser search for google play and download a phone settings app and then open the app through google play and go into security settings and disable reactivation. Lock thing
Click to expand...
Click to collapse
ya but what if the accesability option isnt there ? and there is no visable way to get to a browser unlike a J3(6)?
@mrgluck: I've found that the easiest way to beat FRP locks on a Samsung phone, is to flash combination firmware.
A combo firmware is a firmware used by Samsung to diagnose issues. It isnt meant to be used by average users. However, it can also remove an FRP lock.
Steps:
1. Download Odin (use whatever version you want, i've always used 3.12.7 with the Note 4)
2. Install the latest Samsung USB driver
3. Download combo firmware, search for "n910v combination firmware" or "n910v combination file" on Google
4. Start Odin, load up the tar.md5 file into the AP slot (if it downloaded as a zip/rar/whatever, you need to extract it first), then click Start
5. Once it's done, boot the phone, combo firmware should load. This isnt like anything you've ever used, so dont play around too much once it's booted, could cause yourself more issues...unless, of course, you really know what you're doing
6. Power off, boot into stock recovery, do factory reset, boot it up again
7. Power off, flash regular firmware (not combo) with Odin
When you get to the setup wizard screens, the FRP lock should be gone. I've done this on dozens of phones for myself and friends, it seemed to always work. It's been quite awhile since I flashed one of these, so if my steps arent quite right...
try this
https://www.youtube.com/watch?v=51-WfoNanTo