it is complete dead coz nothing in screen even boot mode also
when inserted cable it is detected as qualcomm cdma interface msm and accepted drivers from samsung qualcomm as qualcomm diagnostics interface 3197 in com port
plz help
Sorry I'm not good at english
My LS980 is lost boot .. qualcomm hs-usb qdloader 9008
I also used some software but are faulty
BoardDiag3.99cx,UNBRICK G2.. not done
What should I do ... please help me .. Thanks
When you plug in your phone to the computer do a bunch of drivers show up? If so then you will need to download SRK Toolkit for the G2 here is the link http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
Hi,
My phone got bricked while installing and update. The phone i hard bricked it shows no signs of life and does not go to Download or recovery mode. Not by button combination or USB Jig.
When I connect the phone to the laptop it shows qualcomm hs-usb qdloader 9008. Is there any way to rescue the phone and debrick it?
Thanks :crying:
Come on people there should be a solution to this crap
Hello Guys,
I have hard bricked ZTE blade A5, and my computer can detected it as Qualcomm HS-USB QDLoader 9008
from all the article that i have read i must be connected as ZTE handset connected Diagnostic Interface to unbricked it.
I've try several ways :
- installed driver (ZTE_Handset_USB_Driver.exe)
- remove batere, simcard dan sdcard
- press volume up & down + power button
- kabel usb dari PC ke HH
stll no vibrate and no zte handset n device manager
I've tried in in windows 7 32/64 bit
force to change driver from Qdloader 9008 to ZTE handset
I've work on this several days and it's make frustated.
But still no luck. Is there any other way that i can still try?
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
The site listed above is all the information I currently have on my problem. I know enough to understand a bit of what's going on but I'm no coder or hacker. I've dabled (meaning rooting S3 Straight Talk, Nexus 7, and S7 Edge).
So my phone is black screen, cannot boot/won't boot. It's an S7 Edge so I'm not pulling the battery out since it won't be water-proof then.
+ I cannot boot into bootloader
+ I cannot boot into recovery
+ Nothing lights up, the LED indicator, the screen, buttons, all unresponsive.
+ ADB won't recognize my phone currently so I can't use that
+ Odin won't recognize the phone so I can't use that
My S7 Edge *plugged into my pc* comes up as "RELINK HS-USB QDLoader 9008 (COM 7)" under 'Ports (COM & LPT)' in DEVMGMT.MSC (Device Manager).
I installed the drivers for Qualcomm following the tutorial from the site above. My phone is now recognized as "Qualcomm HS-USB QDLoader 9008 (COM 7)". I cannot find a BACKUP.IMG of my device since I don't know if that's what I'm supposed to be looking for ("BACKUP.IMG") or if it's just a "compiled" version of the five Odin-flashable images I downloaded.
So, copied from their website;
"Guide, if you are NEW “Qualcomm HS-USB QDLoader 9008” MODE
If you are that lucky person, (I'm not) who is stuck in the NEW “Qualcomm HS-USB QDLoader 9008” mode, to be honest, the steps to be taken are a lot easier. However, you need somebody having the same phone as yours to upload your device’s complete eMMC image for you."
So I guess what I'm posting this for is to find out
1.) if anyone else is having similar issues
2.) if there have been any successful attempts at using this method to recover from hard brick
3.) if someone could go waaaaay out of their way to give me their eMMC file
^ I don't think it has to be a Sprint phone, I just need it to boot into bootloader (I THINK)
I'll update with my progress below!
So I contacted JTag repairs and my response is as follows:
"Hello ------ and thank you for contacting me.
No problem for the questions ...but unfortunately I have a short answer :
The S7 Edge uses UFS Memory instead of Emmc memory, there are no JTAG tools that can communicate this UFS memory...this means it cannot be unbricked with JTAG or similar tools."
So here's the information for anyone else. You'll need a program that can communicate to a hard bricked S7 Edge and you'll need a UFS image backup of a functioning device.
Special thanks to @godpowerrr for trying to help me out with it.
Notes: don't hard brick your S7 yet! Lol.
Have you found any solution? I'm also stuck in the same situation with G935A S7 Edge (AT&T variant)