Database Users

Huawei P9 Lite stuck on bootloop, can't enter recovery mode

Hello, I'm new to xda, in fact I registered just to ask for help. My p9 lite got stuck on huawei logo, when i try to turn off the device it just reboots 2 times and then just stays on huawei logo. I can enter fastboot and rescue mode, but i have not enabled usb debugging and oem unlock on the device earlier. To be honest this is my first android device, in the past i used only windows phones, so you could say i'm completely new to this. Any suggestions on how to recover my phone or flash any rom into it? I'd be very glad if someone helped me find the solution to this problem. Not sure if i made a thread in the correct place, direct me if i'm mistaken

There are few different versions of P9 Lite, look at the back of the phone to the bottom to see the numbers beside VSN and let us know.
1) Also when the phone is turned off plug in the usb to a computer or charging adapter
2) Hold down volume up & power
3) Let go of the power button when you feel the buzz while still holding the volume up button
4) Download latest version & recovery.
5) Go to Settings>Developer Options>USB Debugging On
5B) If you don't see Developer Options in settings, then go to Settings>About Phone>Build Number & ( tap the Build Number untill it unlocks)
6) Update us on the status, hope it works out.

GloryNation said:
There are few different versions of P9 Lite, look at the back of the phone to the bottom to see the numbers beside VSN and let us know.
1) Also when the phone is turned off plug in the usb to a computer or charging adapter
2) Hold down volume up & power
3) Let go of the power button when you feel the buzz while still holding the volume up button
4) Download latest version & recovery.
5) Go to Settings>Developer Options>USB Debugging On
5B) If you don't see Developer Options in settings, then go to Settings>About Phone>Build Number & ( tap the Build Number untill it unlocks)
6) Update us on the status, hope it works out.
Click to expand...
Click to collapse
tried to enter recovery, still not work. can't go to developer options because phone is stuck on logo, can't power off. couldn't find any solution that works anywhere, been searching for more than 6 hours, still no use. phone model is VNS-L21 forgot to mention earlier

What exactly were you doing before this happened and does your computer recognize your phone when plugged in at all.
Try holding volume up & down together & plug phone in when it reboots on you, & report back with what you see. If anything at all.

GloryNation said:
What exactly were you doing before this happened and does your computer recognize your phone when plugged in at all.
Try holding volume up & down together & plug phone in when it reboots on you, & report back with what you see. If anything at all.
Click to expand...
Click to collapse
I tried to install nougat update, computer recognizes it only in fastboot. holding volume buttons haven't changed anything still no progress. the thing is i had installed nougat a moth or so ago and it worked fine, then rolled back to marshmallow and now this. i'm pretty sure i tried to install correct package, because it was the same i had installed earlier

Did you download a adb tool on your computer that have the 'fastboot.exe' file? If so open that folder,
Have the mouse curser hover in that folder, hold down shift & right click the mouse
Open command prompt
Connect phone as is in fastboot mode
Type adb devices & press enter
Type adb continue & press enter

Hi,
I have the same issue as ellanyx.
my phone can only be stucked while booting or if I connect my phone to a computer, I'm able to boot it in fastboot.
as ellanyx, I didn't enable usb-debug nor OEM unlock option...
so when I'm in fastboot, I type the command "fastboot oem unlock xxxxxx" (hopefully the different data needed are the correct ones mentioned on the box of the phone) I get this error message:
C:\Users\Dieu\Downloads\SRKToolHuawei-STABLE-V1.3-20160619>fastboot oem unlock xxxxx
...
FAILED (remote: Command not allowed)
finished. total time: 0.016s
and off course the other options like "fastboot flash recovery recovery.img "... doesn't work.
I can't use the adb commands neither.
when I type the commande, as mentioned above, "adb devices" or "adb continue", nothing works.
So I'm a bit desesperate
do you have any solution for this kind of issue?
thanks

Dude, so the last firmware on your phone was MM or N? If it was MM you should put stock firmware appropriate for your model in dload folder on SD card and put volume+volume-power, and thats it. If you stack on N,....then I dont know because dload method doesnt work with N, or maybe works if you can find stock firmware with recovery for N.
Regards

Unfortunately I can't update with the 3 button update otherwise it would indeed solvemy problem.

pyromana said:
Unfortunately I can't update with the 3 button update otherwise it would indeed solvemy problem.
Click to expand...
Click to collapse
Probably you didnt have correct Oeminfo for MM if dload method didnt work....Try to conect phone with Toolkit and follow procedure for flashing oeminfo and custombin, after that flash stock recovrry and b161 via dload metod. You will find it on forum here.
Regards

the procedure from SRK toolkit?
would it be possible to provide it? because I can't unlock the OEM and I didn't tick the USB debug think.

Maybe problem with the ps not phone so u can not connect with adb
Try with different pc you must have flash oem with fast boot without enable adb from phone if u in fastboot

I can only boot my phone in fastboot (vol- + power) and not in recovery (vol+ + power).
also when using the SRK toolkit, the first screen tells me to be sure that the usb debugging is enable, which I haven't done...
if I'm not mistaken, fastboot is to use the fastboot command and recovery the adb commands
the connection with fastboot works on my computer, the link is made. however when I type the command to unlock the OEM, I get an error stating that the command is not allowed.
when I use the SRK toolkit, with the different questions, he tries to connect the phone with adb and waiting.... waiting...
is there a command to reboot in recovery but from fastboot? in the otherway around it exists but it doesn't seem that from fastboot to recovery it exists.
thanks.

Alexxxx1 said:
Dude, so the last firmware on your phone was MM or N? If it was MM you should put stock firmware appropriate for your model in dload folder on SD card and put volume+volume-power, and thats it. If you stack on N,....then I dont know because dload method doesnt work with N, or maybe works if you can find stock firmware with recovery for N.
Regards
Click to expand...
Click to collapse
dload method works on N. I downgraded my phone from unofficial N update back to official MM update using this method yesterday. You just have to enable OEM at developer options on settings.

It looks like people can't be bothered to read the 1st post properly before they reply.
HE CAN NOT BOOT TO ANDROID SO HE CAN NOT ENABLE OEM OR ACTIVATE USB DEBUGGING!!!!
What he CAN do, is go into eRecovery and Fastboot.
With that in mind, I would suggest using the dload method through fastboot.
Also, make sure it is Huawei SRK Tools 2.0 that is used, as it actually asks if you are in debug mode or fastboot.
Note that there is a few bugs in SRK 2.0:
The TWRP recovery file has the wrong filename in the package, so it WILL fail unless you name it correctly.
Also, when trying to root, do NOT use the "P9 Lite" method as that WILL fail too. Use the "P9/P9 Plus" method.
I am trying to set up a complete guide that can restore the phone when it is stuck in fastboot, however I apparently went a step too far...

ellanyx said:
Hello, I'm new to xda, in fact I registered just to ask for help. My p9 lite got stuck on huawei logo, when i try to turn off the device it just reboots 2 times and then just stays on huawei logo. I can enter fastboot and rescue mode, but i have not enabled usb debugging and oem unlock on the device earlier. To be honest this is my first android device, in the past i used only windows phones, so you could say i'm completely new to this. Any suggestions on how to recover my phone or flash any rom into it? I'd be very glad if someone helped me find the solution to this problem. Not sure if i made a thread in the correct place, direct me if i'm mistaken[/QUOTE
Do you have TWRP recovery ?
---------- Post added at 09:55 AM ---------- Previous post was at 09:50 AM ----------
ellanyx said:
Hello, I'm new to xda, in fact I registered just to ask for help. My p9 lite got stuck on huawei logo, when i try to turn off the device it just reboots 2 times and then just stays on huawei logo. I can enter fastboot and rescue mode, but i have not enabled usb debugging and oem unlock on the device earlier. To be honest this is my first android device, in the past i used only windows phones, so you could say i'm completely new to this. Any suggestions on how to recover my phone or flash any rom into it? I'd be very glad if someone helped me find the solution to this problem. Not sure if i made a thread in the correct place, direct me if i'm mistaken
Click to expand...
Click to collapse
Boot into fastboot mode and flash a custom recovery by meticulus. Link : meticulus.co.vu
Then whenyou get stuck hold power and vol down button for 2 minutes the phone will reboot and then when it says that your device has been unlocked and cant be trusted then only press vol up key ( dont press power button then). The u get into huawei recovery. From that u should power off the phone. Now get a custom rom by meticulus into your device sd card ( Cyanogenmod 13 is recommended ). Then insert sd card in a powered off phone. Now press vol up and power key and flash gapps and custom rom and you are good to go.
Click to expand...
Click to collapse

So, MY question:
I have tried 4 times to get Nougat installed, but every time I got the SMALL package (1.25gb) which means it is not complete.
I decided to try ONE more time, but think I have made a serious mistake.
I was on B161 and tried to downgrade to B160 without upgrading to Nougat first.
This has caused my phone to be stuck at boot with the message "Your device is booting now..."
I can NOT get into eRecovery or fastboot no matter what I do.
If I just leave the phone, then it discharge very fast, but as soon as I plug it in, it starts up and gets stuck at the same screen again.
Does anyone have ANY idea about how I can get out of this problem?
UPDATE:
I have managed to boot to fastboot while connected to my pc.
The phone is unlocked but FRP is LOCKED, which means I can't flash anything.
I read about using Miracle Loader to remove the FRP lock, but it can't "see" my phone. Maybe I am doing it wrong?

SnowmanDK said:
So, MY question:
I have tried 4 times to get Nougat installed, but every time I got the SMALL package (1.25gb) which means it is not complete.
I decided to try ONE more time, but think I have made a serious mistake.
I was on B161 and tried to downgrade to B160 without upgrading to Nougat first.
This has caused my phone to be stuck at boot with the message "Your device is booting now..."
I can NOT get into eRecovery or fastboot no matter what I do.
If I just leave the phone, then it discharge very fast, but as soon as I plug it in, it starts up and gets stuck at the same screen again.
Does anyone have ANY idea about how I can get out of this problem?
UPDATE:
I have managed to boot to fastboot while connected to my pc.
The phone is unlocked but FRP is LOCKED, which means I can't flash anything.
I read about using Miracle Loader to remove the FRP lock, but it can't "see" my phone. Maybe I am doing it wrong?
Click to expand...
Click to collapse
Try to relock and then unlock the bootloader again. And make sure oem unlocking is enabled in dev options

Arsaam said:
Try to relock and then unlock the bootloader again. And make sure oem unlocking is enabled in dev options
Click to expand...
Click to collapse
Please read my previous post again
I can NOT boot normally. And as FRP is locked, then I can't relock or unlock the bootloader.

SnowmanDK said:
Please read my previous post again
I can NOT boot normally. And as FRP is locked, then I can't relock or unlock the bootloader.
Click to expand...
Click to collapse
Go to fast boot mode and from their try to flash meticulus recovery.
You can also try the adb method as well.
Visit meticulus.co.vu

Recover from Hard Brick (900e) - Revive our Z2 WITHOUT DATA LOSS

Hey!
Z2 owners that like to mess around with their phones are prone to get f#ked. I was there and I faced the problem some of you probably did - a hard brick. There are a ton of tutorials on how to fix it, but I believe I found a new way that doesn't envolve resetting it. I have only tried with twice on my phone, so I'm really looking forward to know if it's universal!
Scenario - Your phone has a black screen. The notification LED is on. If you hold the power button it flashes the ZUK logo and it vibrates. If you identify with this scenario, go forward!
1 - To turn off your device (if you haven't already), press the power + volume up. The phone will vibrate, flash the ZUK logo, turn off the LED and turn it on again. Continue holding both buttons. When the LED turns off again, REMOVE your fingers from both buttons right away. If done correctly, it won't come back again and the LED will be off
2 - Hold both Volume Up and Volume Down at the same time. Connect to the computer. You should encounter your Fastboot mode (with your baseband and other info blank).
3 - Go to your email and redownload the bootloader unlocker. Yes, remember that file? Use it. You can use one of those unlock bootloader tutorials online, but if you know what you're doing, here's the command:
fastboot -i 0x2b4c flash unlock unlock_bootloader.img
4 - Right after that, run this other command
fastboot -i 0x2b4c oem unlock-go
That's it. You should be able to go to the recovery (flash it again just to be sure). Try it out and tell me how it goes.

not working...phone is gettin turned off...but holding up and down..then connecting is doin nothing..it just keeps on going on and off again

This method worked for me,thank a lot of,great trick
Sent from my Redmi Note 3 using Tapatalk

you my friend, are a god among men, i owe you a beer.

fastboot mode conncted and flash unlockbootloader.img file..but not boot mobile shows error msg .my bootloader is unlocked any suggestion plz

vardhan21 said:
fastboot mode conncted and flash unlockbootloader.img file..but not boot mobile shows error msg .my bootloader is unlocked any suggestion plz
Click to expand...
Click to collapse
Same thing happened to me..followed this link https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ as my phone showed 900E mode in Qfil ...followed and unbricked..mine bootloader also showed as unlocked

paps2k3 said:
Same thing happened to me..followed this link https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ as my phone showed 900E mode in Qfil ...followed and unbricked..mine bootloader also showed as unlocked
Click to expand...
Click to collapse
hey thnks bro...i successfully enabled 9008 port and flashed firmware
thanku so much

Where were you man I have to cut my wire and format my phone for flashing new firmware

My phone don't show the led light
No button combination works
I was restoring twrp backup and the next boot...And i was bricked
It shows diagnostic mode 900E
Please help

Finally done
vardhan21 said:
fastboot mode conncted and flash unlockbootloader.img file..but not boot mobile shows error msg .my bootloader is unlocked any suggestion plz
Click to expand...
Click to collapse
Had the same problem and first i went to download mode by following the the below link
https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/
then i downloaded the stock firmware and followed this guide
https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/
Both of them helped.:good::fingers-crossed: hope they work for you

Please tell me the process for recover from hard brick, because zukfans.eu is no longer available.

paps2k3 said:
Same thing happened to me..followed this link https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ as my phone showed 900E mode in Qfil ...followed and unbricked..mine bootloader also showed as unlocked
Click to expand...
Click to collapse
What is the process??? Please tell me here because zukfans.eu is not accessable

Rit2005 said:
What is the process??? Please tell me here because zukfans.eu is not accessable
Click to expand...
Click to collapse
Hi ..very sorry..not using z2 plus for a long time..I forgot the process what I did..I followed the steps mentioned there.

EDL mode

EDL (Emergency Download) Mode has been removed/ disable from MIUI 8.1 onwards and Redmi 4A later Xiaomi devices. So you can flash MIUI Fastboot ROMs on your device by using Fastboot mode only, if your bootloader is unlocked. And, we can't use Qualcomm Jig Cable(s) also now.
So, we have only one way to know Qualcomm HS-USB QDLoader 9008 port from PC. It's Test Point Method. This method will work with every MIUI ROMs (Upgrade/ Downgrade) , Locked Bootloader/ Unlocked Bootloader and also work to recover from a Dead boot device (Bricked).
While touching these two points with a metal tweezers plugin the usb cable to the phone and PC will make the phone enter edl mode. You can then release the tweezers.

Bro edl mode is not removed. It's just moved to fastboot. You can enter edl easily by "fastboot oem edl" command. Hope this helped :laugh:

rkmadotra said:
Bro edl mode is not removed. It's just moved to fastboot. You can enter edl easily by "fastboot oem edl" command. Hope this helped :laugh:
Click to expand...
Click to collapse
Thanks for the explanation, in any case tere can be situations that fastboot it's not available, hard but possible, in that case that info is helpful...

TioCareca said:
Thanks for the explanation, in any case tere can be situations that fastboot it's not available, hard but possible, in that case that info is helpful...
Click to expand...
Click to collapse
In any case, the bootloader muz be unlocked to initiate EDL using ADB fastboot..

rkmadotra said:
Bro edl mode is not removed. It's just moved to fastboot. You can enter edl easily by "fastboot oem edl" command.
Click to expand...
Click to collapse
:laugh::laugh::laugh:
what make you think they are so lame ? the result is :
failed ! remote device is locked. eom edl is not allowed

adrenochrome25 said:
:laugh::laugh::laugh:
what make you think they are so lame ? the result is :
failed ! remote device is locked. eom edl is not allowed
Click to expand...
Click to collapse
What makes you think I'm so lame as well. I have used this command and flashed my mi max 2 with fastboot rom. Tho I don't remember if bootloader was locked or unlocked. Probably it was unlocked. But still no issues as anyone can unlock thier bootloader officially.

i wasnt intended at you. it seems they forgot some ways when they first deployed the edl blocking access but with the most recent "roms" they have blocked every access way to edl when bootloader is locked : adb, fastboot & cable
the only way left is from internal pins, but we can expect they will hide them even better on new phones.
Today it's much worth to wait 72h (+30days if you just already unlocked another one today) than opening the models that have "non removable" batteries and risking to leave traces/damages
it's really a shame that xiaomi lock their phone this way, it's a very bad message at the users (fastboot is so much restricted that you cant even switch between stable&dev anymore with locked bootloader) but we still have the chance that they allow unlocking and that this unlocking is a real one allowing full control

Fastboot rom isn't needed untill we brick our device and we can't brick the device untill we have unlocked bootloader. So basically edl mode will work when it's really needed.

It doesn't work for my MM2. Got it since 4/12/17. Didn't know i need to login to mi acc to register my device, set usb debugging, developer's mode, unlock status...I had the phone for less than 2 hrs after updating to MIUI 9 from ver 8 (using the updater app) before it suddenly froze up, crashed and went into bootloop. I tried contacting xiaomi svc ctr but those clowns refused to help saying my device is china export.
I cldn't even get them to help me register my device on my mi acc using the imei & s/n info. So if anyone could offer some suggestions as to how I could ressurrect my phone, I wld be most grateful. Failing which the only avenue is to bring it to a svc ctr in China to get them fix it.
Rgds

My test points don't seem to work
I opened up my mi max2 and followed the steps to short the testpoints but my pc doesn't seem to pick up the Qualcomm device.
Anyway to trigger the thing so that the Qualcomm device can be detected?

Nike Lee said:
I opened up my mi max2 and followed the steps to short the testpoints but my pc doesn't seem to pick up the Qualcomm device.
Anyway to trigger the thing so that the Qualcomm device can be detected?
Click to expand...
Click to collapse
I managed to short the test points and got the Qualcomm HSB device on the device mgr, flashed the mi max2 with the latest global stable (V9.2.1) rom. But the phone is still stuck at the Android logo with 3 dots...
I wld have thought EDL flashing wld have wiped out everything on the phone and start afresh?
I am now thinking of formatting the entire phone and reflashing it again. How wld I do that?
Thanks for any inputs.

Hi, Does EDL with test point flashing refresh the boot partitions?
I have shorted the test points and successfully reflash the phone with the latest stable global ROMs (even back to MIUI 8.5.6) but just couldn't get the phone past the MI/Android logo after restarting it
If the boot partition files have been messed up and EDL flashing is not refreshing these files, no matter how many times I try to EDL flash the device, it's not going to help. Pls correct me if I am wrong.
Any other options I can try?

rkmadotra said:
Bro edl mode is not removed. It's just moved to fastboot. You can enter edl easily by "fastboot oem edl" command. Hope this helped :laugh:
Click to expand...
Click to collapse
bro thank u so muchhhhhhhhhhhhhhhhhhhhhhhh. it worked im so happy now...........was trying since hours....but u helped me mannn

stuck in boot loop no recovery locked bootloader no adb access just fastboot

hi
someone gave me this broken phone so i don't know what happened to get it to this point
here's the breakdown of what it's doing and what i've tried
it's a sprint variant
bootloader ver mata-8a1a76e
baseband ver 2.0.c4-m2.0.2
secure boot yes
device state locked
no power and won't turn on unless connected with a usb cable to laptop or charger but when connected stays on until unplugged
i've tried multiple cables
stuck in boot loop on powered by android screen
with vol up and power just boot loops back to the powered by android screen like there is no recovery
with vol down and power boots into fastboot mode and is visible in simple adb under the fastboot tab i'm able to see the serial number but not under the adb tab there's no devices listed
when i try to use erase or flash commands it says cannot be done in a locked state which tells me the bootloader is locked and the oem and usb debug is not turned on
it says the active slot is b but won't let me change slots because of locked statues
is there anyway to turn on oem unlock and usb debug with it not booting i've tried all of the flashing unlock bootloader commands in simple adb's fastboot tab but nothing is working i can see and talk to the phone with fastboot but because of locked bootloader i can't do anything.
any help would be great it's not important it's just a phone to play around with abd and roms to see what i can do and try to teach myself somethings but it was stock the guy that gave it to me dosen't know anything about phones he dropped it and broke the touch screen and just got another one
so if anyone could point me in the right direction or tell me if it's possible to get oem unlock and usb debug turned on in a non booting no adb connection but fastboot connectable phone with no bootable recovery
if you need anymore info just let me know
thanks in advance
hippiehemp

hippiehemp said:
hi
someone gave me this broken phone so i don't know what happened to get it to this point
here's the breakdown of what it's doing and what i've tried
it's a sprint variant
bootloader ver mata-8a1a76e
baseband ver 2.0.c4-m2.0.2
secure boot yes
device state locked
no power and won't turn on unless connected with a usb cable to laptop or charger but when connected stays on until unplugged
i've tried multiple cables
stuck in boot loop on powered by android screen
with vol up and power just boot loops back to the powered by android screen like there is no recovery
with vol down and power boots into fastboot mode and is visible in simple adb under the fastboot tab i'm able to see the serial number but not under the adb tab there's no devices listed
when i try to use erase or flash commands it says cannot be done in a locked state which tells me the bootloader is locked and the oem and usb debug is not turned on
it says the active slot is b but won't let me change slots because of locked statues
is there anyway to turn on oem unlock and usb debug with it not booting i've tried all of the flashing unlock bootloader commands in simple adb's fastboot tab but nothing is working i can see and talk to the phone with fastboot but because of locked bootloader i can't do anything.
any help would be great it's not important it's just a phone to play around with abd and roms to see what i can do and try to teach myself somethings but it was stock the guy that gave it to me dosen't know anything about phones he dropped it and broke the touch screen and just got another one
so if anyone could point me in the right direction or tell me if it's possible to get oem unlock and usb debug turned on in a non booting no adb connection but fastboot connectable phone with no bootable recovery
if you need anymore info just let me know
thanks in advance
hippiehemp
Click to expand...
Click to collapse
Hi, were you able to fix this issue?
I have the same exact problem here, its been few months actually, but still trying to figure this out.

download the offical firmware images and flash with fastboot
bootloader lock has not effect on flashing stock firmware or whatever slot its on

Legitsu said:
download the offical firmware images and flash with fastboot
bootloader lock has not effect on flashing stock firmware or whatever slot its on
Click to expand...
Click to collapse
Are you sure of that? Because Essential specifically instructs to enable "OEM Unlocking" and unlock the BL before flashing the factory image via fastboot...

Legitsu said:
download the offical firmware images and flash with fastboot
bootloader lock has not effect on flashing stock firmware or whatever slot its on
Click to expand...
Click to collapse
Oh God...
Please stop...
You are full of bad information...
You cannot use fastboot with a locked bootloader .. it is the Essential way...

hippiehemp said:
hi
someone gave me this broken phone so i don't know what happened to get it to this point
here's the breakdown of what it's doing and what i've tried
it's a sprint variant
bootloader ver mata-8a1a76e
baseband ver 2.0.c4-m2.0.2
secure boot yes
device state locked
no power and won't turn on unless connected with a usb cable to laptop or charger but when connected stays on until unplugged
i've tried multiple cables
stuck in boot loop on powered by android screen
with vol up and power just boot loops back to the powered by android screen like there is no recovery
with vol down and power boots into fastboot mode and is visible in simple adb under the fastboot tab i'm able to see the serial number but not under the adb tab there's no devices listed
when i try to use erase or flash commands it says cannot be done in a locked state which tells me the bootloader is locked and the oem and usb debug is not turned on
it says the active slot is b but won't let me change slots because of locked statues
is there anyway to turn on oem unlock and usb debug with it not booting i've tried all of the flashing unlock bootloader commands in simple adb's fastboot tab but nothing is working i can see and talk to the phone with fastboot but because of locked bootloader i can't do anything.
any help would be great it's not important it's just a phone to play around with abd and roms to see what i can do and try to teach myself somethings but it was stock the guy that gave it to me dosen't know anything about phones he dropped it and broke the touch screen and just got another one
so if anyone could point me in the right direction or tell me if it's possible to get oem unlock and usb debug turned on in a non booting no adb connection but fastboot connectable phone with no bootable recovery
if you need anymore info just let me know
thanks in advance
hippiehemp
Click to expand...
Click to collapse
Same problem here. After a official upgrade i can only access to fastboot mode. Select recovery, start, etc... reset the phone and returns to fastboot mode.
Secure boot - yes
only diference - Bootloader version mata-b9326aa and baseband 2.0.c4-M2.0.10

YaKuM0 said:
Same problem here. After a official upgrade i can only access to fastboot mode. Select recovery, start, etc... reset the phone and returns to fastboot mode.
Secure boot - yes
only diference - Bootloader version mata-b9326aa and baseband 2.0.c4-M2.0.10
Click to expand...
Click to collapse
If the bootloader is locked, and you can't get to recovery to sideload, you're stuck

Huawei P9 lite Vns L23 bricked

Hello, im new to the forums and i would like to get some help with this huawei on what to do. I recieved this phone already bricked from a friend, so i would like to see if i can make it work again. I dont know how the phone got bricked and i have no idea of what to do. The problem is that the phone starts in the huawei logo and then goes to a black screen and turns itself off again. The phone doesnt make it past that point. I tried to make a reset from recovery, but it doesnt work. In download mode i tried to download the latest recovery, but it says failed to download. In fastboot mode the phone says "Phone unlocked" in red letters and "FRP locked" in green letters.
Any idea of what to do in order to recover the phone ?.

BrattPitlord said:
Hello, im new to the forums and i would like to get some help with this huawei on what to do. I recieved this phone already bricked from a friend, so i would like to see if i can make it work again. I dont know how the phone got bricked and i have no idea of what to do. The problem is that the phone starts in the huawei logo and then goes to a black screen and turns itself off again. The phone doesnt make it past that point. I tried to make a reset from recovery, but it doesnt work. In download mode i tried to download the latest recovery, but it says failed to download. In fastboot mode the phone says "Phone unlocked" in red letters and "FRP locked" in green letters.
Any idea of what to do in order to recover the phone ?.
Click to expand...
Click to collapse
Hello and welcome !
Just thinking you should try to start a fresh & clean install
rolling back to android 6 regardless of the current firmware.
Took a look inside the UNIFIED HELP THREAD but didn't find
any L23 rollback package...
However, I found another LINK that looks promising.
Good luck :fingers-crossed:
For further explanations try asking here.

Dadditz said:
Hello and welcome !
Just thinking you should try to start a fresh & clean install
rolling back to android 6 regardless of the current firmware.
Took a look inside the UNIFIED HELP THREAD but didn't find
any L23 rollback package...
However, I found another LINK that looks promising.
Good luck :fingers-crossed:
For further explanations try asking here.
Click to expand...
Click to collapse
Nice, i will try this and inform back later.

Dadditz said:
Hello and welcome !
Just thinking you should try to start a fresh & clean install
rolling back to android 6 regardless of the current firmware.
Took a look inside the UNIFIED HELP THREAD but didn't find
any L23 rollback package...
However, I found another LINK that looks promising.
Good luck :fingers-crossed:
For further explanations try asking here.
Click to expand...
Click to collapse
Well it didnt work. It says "incompatibility with this version"

BrattPitlord said:
Well it didnt work. It says "incompatibility with this version"
Click to expand...
Click to collapse
Hi,
you should use the follovinq commands in fastboot mode and then post the results please:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar version
fastboot getvar vendorcountry
Can you access Recovery ? (Power + Volume Up)

-Alf- said:
Hi,
you should use the follovinq commands in fastboot mode and then post the results please:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar version
fastboot getvar vendorcountry
Can you access Recovery ? (Power + Volume Up)
Click to expand...
Click to collapse
im new to this, so i put those commands in windows CMD with the phone connected or how ?
I can get to the stock recovery from huawei.

BrattPitlord said:
im new to this, so i put those commands in windows CMD with the phone connected or how ?
I can get to the stock recovery from huawei.
Click to expand...
Click to collapse
Use ADB commands.
Open developers option and turn on the USB debugging. Connect your device to PC in MTP/FILES mode. Run command
ADB reboot bootloader
(the device will reboot to fastboot mode)
Now you can type fastboot commands.

-Alf- said:
Use ADB commands.
Open developers option and turn on the USB debugging. Connect your device to PC in MTP/FILES mode. Run command
ADB reboot bootloader
(the device will reboot to fastboot mode)
Now you can type fastboot commands.
Click to expand...
Click to collapse
How do i turn debugging if the phone is bricked ? I cant get past the huawei logo. However, i do have access to fastboot mode.

BrattPitlord said:
How do i turn debugging if the phone is bricked ? I cant get past the huawei logo. However, i do have access to fastboot mode.
Click to expand...
Click to collapse
Oh, sorry, my mistake . Okay, install on your PC "Minimal ADB and fastboot" , open it , connect the device in fastboot mode, and run commands.