I am sure this has been discussed on here but I decided to make a new thread anyways. It's nice to get direct support. Anyways....
My Nexus player will not wake from sleep. I watch TV at night before bed. My Nexus Player is currently hooked up to my JVC 32" 1080P TV in my bedroom. So I set the sleep on my TV at night so it shuts off in 60 mins or so. When I wake up the next day, turn my TV on, I get "No Signal". I hit every button on the Nexus player remote. It will not respond. I have to unplug the power and plug it back in to get it to work again. Why will it not wake?
I really liked the Nexus Player at first. I prefer it over my previous streamers, especially being I am going for the new Nexus 5 or 6 upon release this year. I previously used an Apple TV Gen 3. I am bored with Apple and that is why I replaced my Apple TV with the Nexus player and I am replacing my iPhone 6 with a future Nexus device. All done with boring old apple. HaHa.
Any fix to the non-wake issue? What if I just Root it, Unlock the Bootloader, and install CM12? Does CM12.1 for the Nexus Player have the not wake from sleep issue? Thank you for looking!
It's more likely that the HDMI connection on the TV side has died than that the NP is still in sleep, as clicking any button on the remote will wake it. Try just replugging the HDMI cable next time to test.
Do you have HDMI-CEC on that TV, and is it enabled (it might be called something else)? In which case you could try using your TV remote instead.
The TV is brand new. Both HDMI ports work fine. I had no issues with an Apple TV or Fire TV stick. Both woke from sleep just fine even after a day or so of no use.
My TV does have CEC. I guess I could give that a shot?
Maybe I should just exchange it and see if the new one still has issues?
Sorry, I see the word "died" may have been misinterpreted. Before going through the inconvenience of getting it replaced, I'd first do as suggested: try unplugging then replugging the HDMI cable next time the connection fails to force a resync.
Another way of testing whether the NP has actually come out of sleep - even if you can't see anything displayed on your TV - is to see whether it pops up as a device to cast to from any app that supports casting - try YouTube.
Then at least you'll have more information about the root causes of your issue.
It does appear to be my TV that is the issue. When I unplug the HDMI and plug it back in the Nexus Player screen comes right on, where I had left off. Stupid JVC.... lol. I wanted a 32" TV for the bedroom that was not a smart TV and had a good picture with decent sound. I ended up buying this JVC 32" 1080P Full Array LED TV for only $200. I took a shot buying it online and I was amazed to see the display quality and hear the sound quality! I have had no issues with it at all and love it! But of COURSE there had to be something wacky on it! lol. But yeah, its the TV not the Nexus Player. I am hoping to find some kind of fix or work around for it. I have no problem unplugging the hdmi and plugging it back in but doing that non stop is not for the best in my opinion. I don't want to end up wareing out/breaking the HDMI port on my TV or Nexus Player.
I'm experiencing this same issue with my Samsung TV. Another thread suggests the solution is to disable CEC on your TV.
Rektifying said:
It does appear to be my TV that is the issue. When I unplug the HDMI and plug it back in the Nexus Player screen comes right on, where I had left off. Stupid JVC.... lol. I wanted a 32" TV for the bedroom that was not a smart TV and had a good picture with decent sound. I ended up buying this JVC 32" 1080P Full Array LED TV for only $200. I took a shot buying it online and I was amazed to see the display quality and hear the sound quality! I have had no issues with it at all and love it! But of COURSE there had to be something wacky on it! lol. But yeah, its the TV not the Nexus Player. I am hoping to find some kind of fix or work around for it. I have no problem unplugging the hdmi and plugging it back in but doing that non stop is not for the best in my opinion. I don't want to end up wareing out/breaking the HDMI port on my TV or Nexus Player.
Click to expand...
Click to collapse
try changing the 'input' on your JVC tv for a few seconds, then changing it back to the nexus player's input. For ex turn TV on, switch from HDMI 1 to HDMI 2, wait 5sec then back to 1 and see if it registers the NP. Just an idea.
Related
Sent from my A500 using XDA Premium App
well, you don't say what happens, but here's what I did:
10 foot micro to normal hdmi cable.
Plugged it into the tablet. Plugged the other into the TV. Turned on the TV.
Works great! Btw, the bottom bar with the buttons and clock do not show on the TV (by design.)
I have 2 and both have issues if your holding the tablet with HDMI plugged in. It seems the port is a bit weak and so laying it down is the best way for them to work.
Me too
I can't get anything to show on my Panasonic 720P Plasma. Would the native resolution of the TV be a factor?
I've tried 3 different cables, tried jiggling the connections...the micro HDMI does seem to wiggle a little bit...almost like it's a little loose
I bought a cheap cable off ebay, plugged it in, selected HDMI input on the TV and it works perfectly.
Mine is a rooted stock 3.1 but it also worked prior to the 3.1 upgrade.
I thought the same first time I tried.
Turned out to be cable. Got another and that was fine. Worked first time.
Got a replacement for the original and managed to break that on the first go.
To paraphrase Archimedes, Give me a HDMI port small enough and I will break it.
It only takes a litttttle bit of vertical jiggling and it snaps the end off.
cybermage1 said:
well, you don't say what happens, but here's what I did:
10 foot micro to normal hdmi cable.
Plugged it into the tablet. Plugged the other into the TV. Turned on the TV.
Works great! Btw, the bottom bar with the buttons and clock do not show on the TV (by design.)
Click to expand...
Click to collapse
Same here, used micro to hdmi cable included in my Motorola Droid X (in Mexico it's called Motoroi X).
Works nice, it mirrors all but bottom bar and not only by desing but also screen is 800px tall and 720p well... 720px tall, so bar is hidden wich is perfect BUT:
Youtube app ROCKS in HDMI, you see the video in your big screen but you see complete layout in your tab, comments, relared videos, video playing in mini mode etc. but I found that sometimes doesn't work (very rare), also flash sometimes works nice and sometimes it kicks you in the balls.
Hey guys,
Basically I'm currently reviewing the Smart Dock and was wondering if anyone else has one and a Galaxy S4.
I have connected the S4 to the Smart Dock but for some reason it only comes out at 720p max on a monitor and a TV. I tried two other TV's and it doesn't even show up on them.
I'm not sure if it is an issue with me device or compatibility with my S4 and the Smart Dock. I have tested the Smart Dock with an S3 and it displays at 1080p on any TV I connect it too.
So if anyone else has the Dock and S4, can they tell me if it is outputting correctly!
I'll try it on my wife's s4 when she gets home and report back. Barely had a chance to mess with it. Had it for just a few days and I've only ever used it to mirror my Note 2. Haven't even thought of plugging hers in yet.
Aside from charging really fast, I'm pretty disappointed in it so far. The streaming quality is pretty dismal and it's kind of a pain to scroll when you have to force landscape and look at it sideways. I'm gonna hook up a wireless mouse when I get a chance and see if it makes it easier.
-Duly GNOTE2'd
lhkjohn said:
I'll try it on my wife's s4 when she gets home and report back. Barely had a chance to mess with it. Had it for just a few days and I've only ever used it to mirror my Note 2. Haven't even thought of plugging hers in yet.
Aside from charging really fast, I'm pretty disappointed in it so far. The streaming quality is pretty dismal and it's kind of a pain to scroll when you have to force landscape and look at it sideways. I'm gonna hook up a wireless mouse when I get a chance and see if it makes it easier.
-Duly GNOTE2'd
Click to expand...
Click to collapse
Cheers, I really appreciate it. I have noticed that the S4 does seem to have some more tricks. For instance, it will turn off the device display if it detects a mouse is connected to the dock and I have notice it auto rotate itself when docked, however this was with apex launcher, so not sure if touchwiz does as well, but still it was a plus, but something ultimate rotate set to landscape when docked is just as handy.
Anyway, thanks again for the help, let me know how you get on.
1080 here brotha. Actually works better then my Note 2. Sad considering the dock is made for the note.
Edit running stock, unroooted rom and works in 1080 on both my Samsung smart tvs. Haven't tried on a comp yet. Let me know if there's anything particular you want me to test out bro.
-Duly GNOTE2'd
I received my smart dock today (EDD S20EWEG) but when i insert my S4 (9505) into it, nothing happens, Do i need to enable "dock mode" or is it supposed to be automatic(plug and play)? I tempted to return it for a replacemeent , but if i'm doing something wrong it would be great to know before i get a replacement only to find out that the issue is the same
Edit: removing the battery helped
hi
Hello, I have a problem when connecting a peripheral (mouse, keyboard, etc) the screen automatically flips and turns black, saying, which it is connected by hdmi too. that's not right.
otherwise it has explain, does not leave me connect the mouse and keyboard, because the s4 assumed that this also connected the hdmi.
the connection is easily unstable from the wobbly micro HDMI part that goes into my n10. one little move of the micro hdmi wired end will make the TV screen blank, or both screens very dark , and TV screen flickering. but anyways I use this 25ft micro HDMI I bought from Cable matters and I'm wondering if there's anything I can do to fix this without using WiFi/ miracast kinda stuff. I would only like to use a wired connection.
Maybe a bad cable? I watched a movie this past weekend over hdmi and had no looseness.
sttovo said:
Maybe a bad cable? I watched a movie this past weekend over hdmi and had no looseness.
Click to expand...
Click to collapse
yeah it takes a few plug in tries to get full mirroring. sometimes when I plug it in both screens go very dark, not sure what's causing that. when it works perfectly, I have to keep both the tablet and HDMI cable completely still the whole time, or moving the tablet or wire will cause me to lose the mirrored images on my TV, and also my n10 screen will go dark
jamaaal said:
yeah it takes a few plug in tries to get full mirroring. sometimes when I plug it in both screens go very dark, not sure what's causing that. when it works perfectly, I have to keep both the tablet and HDMI cable completely still the whole time, or moving the tablet or wire will cause me to lose the mirrored images on my TV, and also my n10 screen will go dark
Click to expand...
Click to collapse
That's very strange indeed, I've never had any of what you describe happen to me. Try another cable, if you still get the issue, then I think your only option is RMA.
sttovo said:
That's very strange indeed, I've never had any of what you describe happen to me. Try another cable, if you still get the issue, then I think your only option is RMA.
Click to expand...
Click to collapse
whats RMA?
and when the screen goes dark on both devices, my tablet is unusable (cant slide/unlock screen) unless i turn the screen off and then on where it mite be perfectly mirrored or dark again.
I have the exact same issue with my HDMI out, but haven't had a chance to try another cable.
It's likely the cable, or well, it's too late to get an RMA
I tried to look for slimport cable and there seems to be dozen of them on amazon most have negative reviews. which slimport do you guys use? is there one that support both slimport and MHL?
anybody? anyway I went ahead and bought one.
I bought this: http://www.ebay.com/itm/181322353837 It works fine for me.
diamond12 said:
I bought this: http://www.ebay.com/itm/181322353837 It works fine for me.
Click to expand...
Click to collapse
thanks I bought this one, looks similar from yours? I need to weight 7+ days since its coming from china
http://www.ebay.com/itm/221378511982?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
It looks the same except I don't think mine came in a box.
diamond12 said:
It looks the same except I don't think mine came in a box.
Click to expand...
Click to collapse
yeah looks the same hope it works. did you find it useful? I just want to occasionally hook it up to my hdtv
Yes, sure.
The phone gets hot even though the video player plays the video only on the TV and the phone screen turns off.
Also, it only charges slowly when connecting the charger to the dongle.
Compared to Miracast there is no delay but I have to leave the phone next to the TV as the cable isn't long enough.
diamond12 said:
Yes, sure.
The phone gets hot even though the video player plays the video only on the TV and the phone screen turns off.
Also, it only charges slowly when connecting the charger to the dongle.
Compared to Miracast there is no delay but I have to leave the phone next to the TV as the cable isn't long enough.
Click to expand...
Click to collapse
thanks, now I know what to expect. no Lag is the main reason I choose this over miracast and chromecast. I might get chromecast in the future though.
diamond12 said:
Yes, sure.
The phone gets hot even though the video player plays the video only on the TV and the phone screen turns off.
Also, it only charges slowly when connecting the charger to the dongle.
Compared to Miracast there is no delay but I have to leave the phone next to the TV as the cable isn't long enough.
Click to expand...
Click to collapse
hey man I got the cable it works but how do i get the correct aspect ratio. the top part of TV is cut of when on landscape mode? is there a fix or this normal?
or is it because I am on custom rom?
Damasterjj said:
hey man I got the cable it works but how do i get the correct aspect ratio. the top part of TV is cut of when on landscape mode? is there a fix or this normal?
Click to expand...
Click to collapse
The aspect ratio should be correct. As for TVs it is normal to crop a small frame around the image. Sometimes the TV has a TV/PC mode where it doesn't do cropping for PC. My old Motorola Atrix HD had an oversan adjustment that would shrink the image to compensate for the oversan. The G2 doesn't have such an option so if your TV doesn't either there's not much you can do.
diamond12 said:
The aspect ratio should be correct. As for TVs it is normal to crop a small frame around the image. Sometimes the TV has a TV/PC mode where it doesn't do cropping for PC. My old Motorola Atrix HD had an oversan adjustment that would shrink the image to compensate for the oversan. The G2 doesn't have such an option so if your TV doesn't either there's not much you can do.
Click to expand...
Click to collapse
The rom I am using has a mod to make navigation bar smaller. I am not sure if it mess up slimport aspect ratio. I might revert to stock rooted to make sure
I don't mind shrinking but the way it showing up on my TV I am losing some parts of the picture. for example I can't see 4G icon on landscape mode.
BTW, my TV says the signal is 1080p/60
Damasterjj said:
The rom I am using has a mod to make navigation bar smaller. I am not sure if it mess up slimport aspect ratio. I might revert to stock rooted to make sure
I don't mind shrinking but the way it showing up on my TV I am losing some parts of the picture. for example I can't see 4G icon on landscape mode.
BTW, my TV says the signal is 1080p/60
Click to expand...
Click to collapse
1080p60 is correct.
I think not only the top bar but also a smal part of the bottom, left and right sides shoud be hidden.
Try connecting to a computer monitor to confirm it's the TV doing it.
diamond12 said:
1080p60 is correct.
I think not only the top bar but also a smal part of the bottom, left and right sides shoud be hidden.
Try connecting to a computer monitor to confirm it's the TV doing it.
Click to expand...
Click to collapse
yeah small part of the left, buttom, and right is hidden
it doesn't work on my monitor via hdmi
I got an RK8 box and runs great with my 4k TV. Exception being HDMI. When I turn on the RK8, it will not display on my TV. I have to unplug the HDMI from the box and plug it back in and than it will work. Is there a setting that I'm missing?
It's plugged into my HDMI port on the LG for 2.0. The TV also recognizes it as an HDMI 2.0 devices and switches the tv to 10bit colour on that port. Only issue is unplugging and plugging back in the HDMI cable to it to show.
Hi Kevin. Have had the RK8 for a couple of months now, and after the first couple of weeks using it on my Samsung UE65JU6070, I can no longer switch it on with my remote (switching off works fine), thus I have gotten used to unplug/replug the power cord. Maybe it's the same issue you're experiencing? I'll check tonight if unplugging/replugging the HDMI cable does the same trick for me as the power cord.
Can I ask, what is your experience in playing 4K youtube video's? It seems mine is very reluctant to do so (doesn't work on the youtube app, and only sporadically using a webbrowser).
Otherwise I agree with you .... it is a great box which seems to run very stable without any overheating issues etc. ..... and having upgraded KODI to 15.2 means I no longer have any stability issues there either (NB: if you do this update, you need to uninstall the pre-installed KODI 14 first .... so remember to save your settings etc.).
Just a last comment. At 70 USD this seems to me to be great value ..... I'm surprised it's so difficult to find other people on the Internet who have experience with this box ....
Best regards Mogens
mogensberg said:
Hi Kevin. Have had the RK8 for a couple of months now, and after the first couple of weeks using it on my Samsung UE65JU6070, I can no longer switch it on with my remote (switching off works fine), thus I have gotten used to unplug/replug the power cord. Maybe it's the same issue you're experiencing? I'll check tonight if unplugging/replugging the HDMI cable does the same trick for me as the power cord.
Can I ask, what is your experience in playing 4K youtube video's? It seems mine is very reluctant to do so (doesn't work on the youtube app, and only sporadically using a webbrowser).
Otherwise I agree with you .... it is a great box which seems to run very stable without any overheating issues etc. ..... and having upgraded KODI to 15.2 means I no longer have any stability issues there either (NB: if you do this update, you need to uninstall the pre-installed KODI 14 first .... so remember to save your settings etc.).
Just a last comment. At 70 USD this seems to me to be great value ..... I'm surprised it's so difficult to find other people on the Internet who have experience with this box ....
Best regards Mogens
Click to expand...
Click to collapse
I have no remote/power issues. Just issue with it showing on my tv. It powers up and won't display. TV see's that HDMI3 has power but does not show unless I unplug/plug the HDMI cord in the box.
I don't use youtube on this box. Just Kodi.
kevink15 said:
I have no remote/power issues. Just issue with it showing on my tv. It powers up and won't display. TV see's that HDMI3 has power but does not show unless I unplug/plug the HDMI cord in the box.
I don't use youtube on this box. Just Kodi.
Click to expand...
Click to collapse
Hi again Kevin. Since my last post, it has happend 3 - 4 times that I've experienced your issue of "black screen", but for me it has come out of the blue. Picture comes back when unplugging and replugging the HDMI cable just as you say. I was wondering if you have gotten any closer to find a solution?
Pls be aware that I tried to update to Kodi Jarvis (16.0) release, but went back to 15.2 due to an issue with menu text being "corrupted", which required each time starting Kodi to go and change the font. Allegedly it's an issue related to HDMI as well, so I'm wondering if there is some "glitch" in the box' HDMI implementation (HW or FW).
I'm sure you have tried already, but if not, have you tried to move the HDMI cable to another input on the TV? Do you have some configuration possibilities with the HDMI inputs on the TV ... if yes, maybe play around with those.
Small quirks ... but I have to say that for USD 60, this is still an amazing box even if I still cannot power it on with any remote (but power off works fine with all remotes).
Best regards Mogens
mogensberg said:
Hi again Kevin. Since my last post, it has happend 3 - 4 times that I've experienced your issue of "black screen", but for me it has come out of the blue. Picture comes back when unplugging and replugging the HDMI cable just as you say. I was wondering if you have gotten any closer to find a solution?
Pls be aware that I tried to update to Kodi Jarvis (16.0) release, but went back to 15.2 due to an issue with menu text being "corrupted", which required each time starting Kodi to go and change the font. Allegedly it's an issue related to HDMI as well, so I'm wondering if there is some "glitch" in the box' HDMI implementation (HW or FW).
I'm sure you have tried already, but if not, have you tried to move the HDMI cable to another input on the TV? Do you have some configuration possibilities with the HDMI inputs on the TV ... if yes, maybe play around with those.
Small quirks ... but I have to say that for USD 60, this is still an amazing box even if I still cannot power it on with any remote (but power off works fine with all remotes).
Best regards Mogens
Click to expand...
Click to collapse
I haven't had time to work with it to be honest. I think its a poor HDMI 2.0 design on the box. I still have the issue and just yesterday, my Kodi updated to 16 and I get the same issue as you with the block lettering which I haven't tried to fix as yet. Thanks for sharing changing of the font.
Reason I suspect its the unit and not tv, is because sometimes when it does not display on my tv. The tv gives a pop up indicating "The device connected does not support 10 bit deep colour". Then I unplug and plug and it goes away.
Hopefully I can get sometime to fiddle with it more and see how it can be resolved.
Have you tried to see if there is a software update? The update option on my box does not even work. I wonder if we both got knock offs or just duds.
kevink15 said:
I haven't had time to work with it to be honest. I think its a poor HDMI 2.0 design on the box. I still have the issue and just yesterday, my Kodi updated to 16 and I get the same issue as you with the block lettering which I haven't tried to fix as yet. Thanks for sharing changing of the font.
Reason I suspect its the unit and not tv, is because sometimes when it does not display on my tv. The tv gives a pop up indicating "The device connected does not support 10 bit deep colour". Then I unplug and plug and it goes away.
Hopefully I can get sometime to fiddle with it more and see how it can be resolved.
Have you tried to see if there is a software update? The update option on my box does not even work. I wonder if we both got knock offs or just duds.
Click to expand...
Click to collapse
Hi Kevin,
The box is made by Acemax, and there is no FW update since the original (believe the one it's shipped with is dated 30. sep 2015 ...but that's from memory as I'm at work). I don't think it's a knock off, but I do think it's a "standard" board which is basically put into a plastic cabinet, where the only difference to identical spec products (like the Xidoo X6 Pro) is the location of the USB ports. It seems it uses exactly the same components as that one and others similar to it ... however, Acemax do seem to have FW updates for other products they've made on their homepage, so ... who knows. If somebody is brave and skillful enough, such person may even try at install a FW from f.ex. the Xidoo box ... but I'm afraid that's not me (not due to lack of bravery, but ... skill!!). With that being said, I believe my issue with having to unplug/replug the power cord once per day is something I can live with easily (and it has worked, so it may be a question of resetting the box, which I frankly am to lazy to do!!), so .... I guess looking at such small quirks and comparing them to the overall usability of the box, then the trade-off is not too bad.
A quick view on a couple of threads for similar boxes (f.ex. the Xidoo) would seem to indicate that some of their users are having issues that makes ours "luxury problems" in comparison.
Anyway, I'll keep you updated if I stumble over something useful .... and would appreciate if you do the same.
P.S. A "clever" streaming guy has told me that the best Kodi version in terms of stability for live TV streaming still is Helix .... although I'm quite happy with Isenguard (got too tired of the font changing thing on Jarvis, so I re-installed Isenguard). I'm more or less only using mine for streaming HD channels (mostly UK Sky / BT sports) for EPL, and it works fantastic.
I found a weird solution for the unplug issue! When I turn on the box and my tv is on the hdmi port. I turn the tv off and turn it back on and the box displays. Tried this a few times and it worked.
mogensberg said:
Hi Kevin,
The box is made by Acemax, and there is no FW update since the original (believe the one it's shipped with is dated 30. sep 2015 ...but that's from memory as I'm at work). I don't think it's a knock off, but I do think it's a "standard" board which is basically put into a plastic cabinet, where the only difference to identical spec products (like the Xidoo X6 Pro) is the location of the USB ports. It seems it uses exactly the same components as that one and others similar to it ... however, Acemax do seem to have FW updates for other products they've made on their homepage, so ... who knows. If somebody is brave and skillful enough, such person may even try at install a FW from f.ex. the Xidoo box ... but I'm afraid that's not me (not due to lack of bravery, but ... skill!!). With that being said, I believe my issue with having to unplug/replug the power cord once per day is something I can live with easily (and it has worked, so it may be a question of resetting the box, which I frankly am to lazy to do!!), so .... I guess looking at such small quirks and comparing them to the overall usability of the box, then the trade-off is not too bad.
A quick view on a couple of threads for similar boxes (f.ex. the Xidoo) would seem to indicate that some of their users are having issues that makes ours "luxury problems" in comparison.
Anyway, I'll keep you updated if I stumble over something useful .... and would appreciate if you do the same.
P.S. A "clever" streaming guy has told me that the best Kodi version in terms of stability for live TV streaming still is Helix .... although I'm quite happy with Isenguard (got too tired of the font changing thing on Jarvis, so I re-installed Isenguard). I'm more or less only using mine for streaming HD channels (mostly UK Sky / BT sports) for EPL, and it works fantastic.
Click to expand...
Click to collapse
Not sure if you saw my last note about the power. I've also figured out more about this box. It has a rockchip which is one of the worst to use. Kodi does not support that chip fully, hence the weird text when launched. We have to stick with the preload or, I've read some place to download the "X86" apk from the kodi site. Also, I tested my box on a regular 1080p tv with hdmi 1.4. And the issues of it not displaying right away, are eliminated which lead me to believe the hdmi 2.0 in this box is poorly designed.
I'm probably going to use this box in my room and get a box with an Amlogic chip for 4k as those are the better boxes to have and more support is offered.
kevink15 said:
Not sure if you saw my last note about the power. I've also figured out more about this box. It has a rockchip which is one of the worst to use. Kodi does not support that chip fully, hence the weird text when launched. We have to stick with the preload or, I've read some place to download the "X86" apk from the kodi site. Also, I tested my box on a regular 1080p tv with hdmi 1.4. And the issues of it not displaying right away, are eliminated which lead me to believe the hdmi 2.0 in this box is poorly designed.
I'm probably going to use this box in my room and get a box with an Amlogic chip for 4k as those are the better boxes to have and more support is offered.
Click to expand...
Click to collapse
Hi Kevin,
I just now saw your other post about the power .... I tried that myself, but to no avail.
I'm not sure you're right about the Rockchip being one of the worst technically, but in terms of support (official and un-official) you're right.
However, since I use my box for watching IP TV, I can live with using Kodi 15.2. I've tried the Kodi 17 dev version, and it has the same issue with garbled text as Kodi 16.
The Kodi x86.apk cannot be installed on our box .... I tried yesterday, but I guess it is for an Intel based android solution.
In terms of HDMI 2.0 implementation, I wouldn't be surprised if it's not perfectly implemented .... not sure if HDCP 2.2 also plays a role.
Anyway, at the end of the day you get what you pay for .... and since I paid USD 65 for my box, I have to say I feel I got a lot of value for money, despite it's few quirks .... and as a friend of mine always says; what kind of life would it be without complaints
Best regards Mogens
Hi again Kevin,
The family being out for Saturday shopping, I spent a little time with my afternoon coffee on the computer.
You are right, that KODI do not support the RK3368 SoC, as the manufacturer does not comply with Android standards, which necessitates that standard KODI is "hacked" to work perfectly with this chip .... something the KODI development community naturally does not want to do.
However, it seems the manufacturer Zidoo whose Z6 box is based on the same SoC, has showed some good customer service, and actually created a ZDMC app, which is basically KODI 16 with a few modifications for RK3368.
I downloaded their firmware for the Z6 box, and extracted the ZDMC apk from there and installed it on my RK8 box ..... and albeit I've only tested it shortly, it works beautifully with no issues so far. Apart from not having garbled menu text, it also seems like it's actually able to make 4K output (the standard KODI irrespective of versions only seemed to be able to show FHD, but would in turn show a refresh rate of twice the actual .... too techincal for me!).
Long story short, if you want to test it out, I've uploaded the above apk to Mega with the download link below.
https://mega.nz/#!TR1SEByC
Encryption key needed: !kN-15aGvZljVdKEus9LT7NxCYjqnthR8bbaYD_YfhiQ
Let me know if it works for you and/or if you find anything. Also let me know if the download link doesn't work.
Enjoy your weekend!
Best regards Mogens
kevink15 said:
Not sure if you saw my last note about the power. I've also figured out more about this box. It has a rockchip which is one of the worst to use. Kodi does not support that chip fully, hence the weird text when launched. We have to stick with the preload or, I've read some place to download the "X86" apk from the kodi site. Also, I tested my box on a regular 1080p tv with hdmi 1.4. And the issues of it not displaying right away, are eliminated which lead me to believe the hdmi 2.0 in this box is poorly designed.
I'm probably going to use this box in my room and get a box with an Amlogic chip for 4k as those are the better boxes to have and more support is offered.
Click to expand...
Click to collapse
Hi again Kevin,
Just a last comment this time around. I've now used the above mentioned RK3368 "modified" version of Kodi 16, and I have to say it is extremely stable and works better on the RK8 than Kodi 15.2.
If you have a chance, try it out. Given the very, very limited 4K material out there, I hope this box should be able to carry me through the next couple of years until availability of material as well as new compression methods become available.
Best regards Mogens