the connection is easily unstable from the wobbly micro HDMI part that goes into my n10. one little move of the micro hdmi wired end will make the TV screen blank, or both screens very dark , and TV screen flickering. but anyways I use this 25ft micro HDMI I bought from Cable matters and I'm wondering if there's anything I can do to fix this without using WiFi/ miracast kinda stuff. I would only like to use a wired connection.
Maybe a bad cable? I watched a movie this past weekend over hdmi and had no looseness.
sttovo said:
Maybe a bad cable? I watched a movie this past weekend over hdmi and had no looseness.
Click to expand...
Click to collapse
yeah it takes a few plug in tries to get full mirroring. sometimes when I plug it in both screens go very dark, not sure what's causing that. when it works perfectly, I have to keep both the tablet and HDMI cable completely still the whole time, or moving the tablet or wire will cause me to lose the mirrored images on my TV, and also my n10 screen will go dark
jamaaal said:
yeah it takes a few plug in tries to get full mirroring. sometimes when I plug it in both screens go very dark, not sure what's causing that. when it works perfectly, I have to keep both the tablet and HDMI cable completely still the whole time, or moving the tablet or wire will cause me to lose the mirrored images on my TV, and also my n10 screen will go dark
Click to expand...
Click to collapse
That's very strange indeed, I've never had any of what you describe happen to me. Try another cable, if you still get the issue, then I think your only option is RMA.
sttovo said:
That's very strange indeed, I've never had any of what you describe happen to me. Try another cable, if you still get the issue, then I think your only option is RMA.
Click to expand...
Click to collapse
whats RMA?
and when the screen goes dark on both devices, my tablet is unusable (cant slide/unlock screen) unless i turn the screen off and then on where it mite be perfectly mirrored or dark again.
I have the exact same issue with my HDMI out, but haven't had a chance to try another cable.
It's likely the cable, or well, it's too late to get an RMA
Related
I have a vibrant and recently got a 3.5 km to RCA out and I'm having problems displaying vibrant on TV. I've tried all combinations but nothings working. Any suggestions.
Sent from my SGH-T959 using XDA App
-make sure the 3.5mm plug is all the way down on your phone
-swap the yellow and red on your tv side
-this might sound dumb but make sure your on the correct input on your tv set...
Can't think of anything else...make sure you click on tv out on your phone
Sent from my SGH-T959 using XDA App
You have the 3 RCA out wire not just a single RCA out, correct?
As mentioned above yellow is not the video, it's red.
You have made the appropriate change in Settings to enable TV Out?
It's also possible that your cable is simply not compatible, unless of course you bought one that was tested already by someone here. Not all of them work, for some reason.
yah I did everything. I thought it might be the Tom I was running. I made sure I did everything. Bit it might just not be compatible
Sent from my SGH-T959 using XDA App
FYI there's a Nokia cable out there that has the correct colors. You can find it on eBay. CA-75u I believe.
CHANGE
change the colors..instead of yellow yellow..red to yellow yellow to red..good luck
I have a 3.5mm to RCA cable that I bought for my Creative Zen X-Fi2 and it works great for the video out on the Vibrant. Monoprice.com has them for a reasonable price.
Just making sure you didn't miss this step. You have to go into settings/Sound & Display/TV Out
You then have to check the TV Out box. This resets every time you reboot the phone so you have to continue changing each time you need it.
Nokia CA-75U
I just got my CA-75U cable in the mail and no matter what I try, I can't get it to work with my Samsung Vibrant.
With all the colors plugged in correctly and music playing, I can hear it on the TV speakers, unplugging white cuts half the sound, unplugging red cuts the other half out.
The strange part is that all I get is one large white zigzagging line halfway down my screen, the REALLY strange part is that it gives me that line no matter which color is plugged into the yellow port!
The TV is on the correct input.. TV Out is indeed enabled.
I have no idea what else to try, could it possibly be the ROM I'm running?
I've got Nero V3 on my Vibrant along with Voodoo enabled.
Any ideas are much appreciated!
Alperon said:
I just got my CA-75U cable in the mail and no matter what I try, I can't get it to work with my Samsung Vibrant.
With all the colors plugged in correctly and music playing, I can hear it on the TV speakers, unplugging white cuts half the sound, unplugging red cuts the other half out.
The strange part is that all I get is one large white zigzagging line halfway down my screen, the REALLY strange part is that it gives me that line no matter which color is plugged into the yellow port!
The TV is on the correct input.. TV Out is indeed enabled.
I have no idea what else to try, could it possibly be the ROM I'm running?
I've got Nero V3 on my Vibrant along with Voodoo enabled.
Any ideas are much appreciated!
Click to expand...
Click to collapse
I know this may seem obvious but... you have the TV out set to NTSC, right?
Alperon said:
I just got my CA-75U cable in the mail and no matter what I try, I can't get it to work with my Samsung Vibrant.
With all the colors plugged in correctly and music playing, I can hear it on the TV speakers, unplugging white cuts half the sound, unplugging red cuts the other half out.
The strange part is that all I get is one large white zigzagging line halfway down my screen, the REALLY strange part is that it gives me that line no matter which color is plugged into the yellow port!
The TV is on the correct input.. TV Out is indeed enabled.
I have no idea what else to try, could it possibly be the ROM I'm running?
I've got Nero V3 on my Vibrant along with Voodoo enabled.
Any ideas are much appreciated!
Click to expand...
Click to collapse
Having the exact same problem. Any help would be great.
Just for reference, is this the correct cable? In the comments section some random guy said it worked great on his vibrant so I went with it.
http://www.amazon.com/gp/product/B000I1D0BW/ref=oss_product
That's why I posted about the CA-75U earlier in the thread. Someone, not on Amazon, said it worked fine too.
Are you perhaps trying to play Avatar? That won't work. It's got DRM.
Well if you were thinking of upgrading to Nero V5 or soon to be V6 you might want to flash back to stock and see if that works.
I have Nero 5 and plugged my non-Nokia cable in, red as video and it's working
For the tv out. I am using a wire set that came with my old motorola zine. You could call tmo and find out where to get a replacement for that phone.
Sent from my SGH-T959 using XDA App
megatherian said:
I know this may seem obvious but... you have the TV out set to NTSC, right?
Click to expand...
Click to collapse
NTSC is used for US made or made FOR US TVs
PAL is for european. not going into details but the difference deals with FPS and power output.
it just sucks how bad tv out looks on my hdtv...i wish there was an option to do it thru hdmi besides buying a video converter box.
frames per second (which is directly related to power output) and resolution are different for PAL tv sets
Does anyone know how to get TV Out working and what can be viewed on TV?
Sent from my Vibrant running GingerCloneR2
You need a cable like this.
http://cgi.ebay.com/Multimedia-AV-A...54243?pt=PDA_Accessories&hash=item255da489e3#
Notice the three bands on the jack. You don't necessarily have to get that exact listing, but the cable that you purchase should have three bands (two audio, one video.)
Also, I don't think Avatar (if that's what you're trying to play) will work due to copy right restrictions. But any other pictures/videos/etc should be viewable via this method.
Hope this helps.
I guess my question is what all can play through the TV Out?
Sent from my Vibrant running GingerCloneR2
WilliamKingX17 said:
I guess my question is what all can play through the TV Out?
Sent from my Vibrant running GingerCloneR2
Click to expand...
Click to collapse
Everything. Your phone literally comes up on your TV.
By the way, there is a flaw in the phone where you have to switch the video cable with one of the audio cables.
So one of the audio cables either red or white acts as the yellow?
Sent from my Vibrant running GingerCloneR2
My phone does not have that issue. Red yellow white is red yellow white.
Sent from my SGH-T959 using XDA App
I don't think it is the phone, but the cable you have is correct for the phone. If you try to hook up a different device i'd be willing to bet the cables would be crossed.
I took a random cable I had laying around and tried crossing the colors around until I got something to work.
Sent from my SGH-T959 using XDA App
It's the wire. Try it matching up if not switch. Also it must be turned on in settings just in case you did not know.
on my cable the red is used for video out. weird but it works
If you have hady Cam U can use cables from handy cam.
While connecting to TV reverse red and yelow.
i.e connect red cable to yellow point and yellow cable to red point.
It will work
I think Samsung also has out a micro usb to hdmi cable as well. However they want something crazy like $80 for it. I would imagine any standard micro usb to hdmi would work, but I'm not sure.
I can tell you from experience that not all 'camcorder' (1/8" headphone plug to 3 RCA) cables will work.
The first cable I got didn't work at all, no matter what combination of colors I tried.
I made sure to get a cable made specifically for the Vibrant the 2nd time and it worked perfectly.
Tarzanman said:
I can tell you from experience that not all 'camcorder' (1/8" headphone plug to 3 RCA) cables will work.
The first cable I got didn't work at all, no matter what combination of colors I tried.
I made sure to get a cable made specifically for the Vibrant the 2nd time and it worked perfectly.
Click to expand...
Click to collapse
Got to agree with that, cause I have a cable here that refuses to work no matter which color combination I try. I ordered after reading a user's experience claiming it works on the Vibrant. Doesn't work for me.
Here's the cable: http://www.amazon.com/gp/product/B000I1D0BW/ref=oss_product
TV out
I tried the audio jack to tv and it did work partially, but not completely. If you can get it cheaper a micro usb cable might be better?
Sent from my A500 using XDA Premium App
well, you don't say what happens, but here's what I did:
10 foot micro to normal hdmi cable.
Plugged it into the tablet. Plugged the other into the TV. Turned on the TV.
Works great! Btw, the bottom bar with the buttons and clock do not show on the TV (by design.)
I have 2 and both have issues if your holding the tablet with HDMI plugged in. It seems the port is a bit weak and so laying it down is the best way for them to work.
Me too
I can't get anything to show on my Panasonic 720P Plasma. Would the native resolution of the TV be a factor?
I've tried 3 different cables, tried jiggling the connections...the micro HDMI does seem to wiggle a little bit...almost like it's a little loose
I bought a cheap cable off ebay, plugged it in, selected HDMI input on the TV and it works perfectly.
Mine is a rooted stock 3.1 but it also worked prior to the 3.1 upgrade.
I thought the same first time I tried.
Turned out to be cable. Got another and that was fine. Worked first time.
Got a replacement for the original and managed to break that on the first go.
To paraphrase Archimedes, Give me a HDMI port small enough and I will break it.
It only takes a litttttle bit of vertical jiggling and it snaps the end off.
cybermage1 said:
well, you don't say what happens, but here's what I did:
10 foot micro to normal hdmi cable.
Plugged it into the tablet. Plugged the other into the TV. Turned on the TV.
Works great! Btw, the bottom bar with the buttons and clock do not show on the TV (by design.)
Click to expand...
Click to collapse
Same here, used micro to hdmi cable included in my Motorola Droid X (in Mexico it's called Motoroi X).
Works nice, it mirrors all but bottom bar and not only by desing but also screen is 800px tall and 720p well... 720px tall, so bar is hidden wich is perfect BUT:
Youtube app ROCKS in HDMI, you see the video in your big screen but you see complete layout in your tab, comments, relared videos, video playing in mini mode etc. but I found that sometimes doesn't work (very rare), also flash sometimes works nice and sometimes it kicks you in the balls.
As the title says I am very interested in using this tablet as a head unit replacement. I still have plenty of researching to do, but before I get too deep into it, I think there is one problem that should be addressed.
I wouldn't consider myself an audiophile, but I do like my music. So using the 3.5mm jack for audio simply will not do. I have seen a video of someone using a Turtle Beach audio adapter to get usb audio out of the N7, and then into the stereo/processing unit. This would be perfect for me, however I also need to be able to hook up an external drive for additional storage.
So my question is if it is possible to hook up the usb audio cable, and an external drive simultaneously to the N7. My idea right now is to hook up an OTG cable to the N7, then plug in a small non powered usb hub which would have both the external drive and usb audio cable hooked up to it. I am just not sure if this setup is possible, and before I purchase all the components I would like to have some confirmation that it will work like i think it will.( I will be using a rooted N7 with stickmount installed, I believe that is all I need to allow Host capabilities)
On a side note, I also plan to use the pogo pins to charge the device. I saw a video of someone using a hacked usb cable to charge the galaxy nexus with it, so i think that should work. (I just read a thread saying that the galaxy nexus can't charge through a pogo pin dock while having a OTG cable plugged...My dreams are being crushed.)
If you would like any more info about the specifics of the setup, I would be happy to share my ideas.
Sorry for the length of the post, I just want it to be clear what I am trying to do here.
Any information, or tips would be greatly appreciated.
Thank you.
I think my dreams are also crushed, I believe the pogo pins are a pin-out extension of the usb port, not a separate port, therefore using OTG would ****-block charging, which is disappointing.
You could however use one of these in your car http://www.slashgear.com/seagate-goflex-satellite-wi-fi-hard-drive-gets-android-app-01168797/ which would provide 500GB of storage accessible whilst your nexus 7 is charging, combine that and a pocketwifi device to act as a router and provide internet access it would be perfect
if you had an AC power inverter or appropriate power supply for DC to the unit (saves inverting then converting again), you could use this one http://www.ccpu.com.au/show_prod.php?class_id=disk-ext&prod_id=STAM1000200
would be very awesome, looking forward to updates.
Thanks for the info.
That is deeply saddening that you can not use both at the same time, although I guess it does make sense for the purposes of a dock. So it looks like now the only way I can still use a plugged in external hdd, usb audio, and be able to charge the device at the same time is if I can do all of that through the mini usb port in conjunction with a usb hub...but i think that is unlikely. does anyone know for sure?
And thank you for bringing up those wifi hard drives. I didn't want to use them, something about having it plugged into the device directly just makes me feel better...although now I will have to seriously consider them.
Also, if anyone has any info regarding tablet install you think may be useful, feel free to post the link. Even if it is not directly related to the N7, it could still be useful info, and maybe get some gears turning in our heads.
I just became a member so I am not allowed to post links yet :silly:
I will still keep my hopes up about using this device, though! It is my favorite 7 inch tablet by far.
What about usb powered hubs?
Wololo7 said:
What about usb powered hubs?
Click to expand...
Click to collapse
Can the Nexus output digital audio, charge, and read an external HDD, via powered usb hub from its one micro usb port? If it could then all my problems would be solved! Until I encounter my next problem, of course. :silly:
Sounds very interesting indeed. I look forward to seeing what can be done.
Wololo7 said:
What about usb powered hubs?
Click to expand...
Click to collapse
Nope. Did not work for me.
I thought about using the Nexus 7 as my car nav system as well. I stumbled across an issue where I want to mount external USB drive AND charge the tablet at the same time. I could not get the tablet to charge with a powered USB drive. I believe the tablet is going into host mode to read the USB drive, and thus disallowing any kind of power to charge itself.
Please someone prove me wrong.. I really like this tablet. It is the perfect size for the car.
Another issue I found... Using polarized sunglasses + nexus 7 (landscape mode) = completely black screen. This may or may not convince you to continue with this project. I am certainly looking at different options..
Im thinkin about this too. But not to completly replace my headunit but only to slap it on for long drives
Sent from my SPH-D710 using Tapatalk 2
voidshado said:
Another issue I found... Using polarized sunglasses + nexus 7 (landscape mode) = completely black screen. This may or may not convince you to continue with this project. I am certainly looking at different options..
Click to expand...
Click to collapse
I noticed this, too. Disappointing. My HTC EVO View works fine, though.
Very interested in this. I've actually been working on this very project. I'm near completion (sort of) actually, but I'm having a separate electrical issue currently so its been on hold for the last week or so. At this point I've run sound via the 3.5 mm jack, but if a USB solution is found, I'd be all over that. I guess I settled for the 3.5 mm jack as previously, I tended to stream Pandora and various music through the aux jack on my phone anyways. Probably more than 90% of the time actually. I may look into the Seagate GoFlex Satellite WiFi HDD for external storage since charging and USB OTG at the sime time at this point seems impossible/difficult. I have a pair of polarized oakleys that i usually wear, and havent noticed the screen blacking out yet, but I'll have to see when I get home tonight.
On charging & usb host mode at the same time..
Has anybody tried this:
1. Setup a powered USB hub plugged into the Micro OTG cable
2. hack the cable from right after the OTG cable to where it plugs into the hub, so that the voltage pins are exposed
3. solder in the voltage pins to a usb connector so you can plug in a normal charger [5V 2A]
4. check to see if you can use the USB hub and charge at the same time
I currently have a Asus transformer TF101 and the primary use is watching clips off a 500GB usb HDD. I really, really want to get a N7 and sell my TF101, but if charging & simultaneous host mode is not possible, I would be slightly hesitant to buy it, even though it is really a awesome tablet from what I hear.
so if anyone has any info on that, I would greatly appreciate it!
ahavens17 said:
At this point I've run sound via the 3.5 mm jack, but if a USB solution is found, I'd be all over that. I guess I settled for the 3.5 mm jack as previously, I tended to stream Pandora and various music through the aux jack on my phone anyways.
Click to expand...
Click to collapse
I know a lot of people that the 3.5 mm jack for audio. And It really does sound just fine. It is just that I am planing on investing a lot in amps/speakers, so I don't want my weakest link to be my inputs right out of the gate. Although, this tablet is making it pretty difficult to not use that jack.
I would be interested to see your project whenever you finish, or if you have information up of of the process now, that would be interesting to look at.
Thanks again everyone for all the info! I still have a shred of hope for using this tablet in my car!
pikachu2000 said:
I know a lot of people that the 3.5 mm jack for audio. And It really does sound just fine. It is just that I am planing on investing a lot in amps/speakers, so I don't want my weakest link to be my inputs right out of the gate. Although, this tablet is making it pretty difficult to not use that jack.
I would be interested to see your project whenever you finish, or if you have information up of of the process now, that would be interesting to look at.
Thanks again everyone for all the info! I still have a shred of hope for using this tablet in my car!
Click to expand...
Click to collapse
I'm running 4 Polk 6" speakers that replaced the stock ones in my car (just replaced them all last year when I blew one of the stock ones), and a cadence 4 channel amp to power the speakers. Nothing top of the line, and no subwoofer or anything as of yet. Picked up the cabling from monoprice, with all of it being their "premium" selection. It all seems pretty heavy duty and solid. Only ran me around 30 bucks. I just have an 02 Mitsubishi Lancer that I'm putting this in. The dash is originally a single din so it's taken quite a bit of modification to get it to fit. More than I originally anticipated. Just a hobby project I've wanted to do for sometime and when the nexus 7 came along I jumped on it. I'll post some pics when I have a chance but at this point it looks far from professional. lol.
Also, I pulled out the Nexus 7 last night and had my polarized glasses on, no screen blackening that was mentioned previously for me. Maybe a little distortion/filter over the screen at certain angles, but still viewable.
I think this thread is great. I'd love to see/hear what other people are doing or what ideas come about from this.
Thank you, I am really glad this thread has spiked some interest, and that other people have similar ideas. I will start up my research again and come back to post any new info when I can. Gotta keep this thread going strong!
pikachu2000 said:
I would be interested to see your project whenever you finish, or if you have information up of of the process now, that would be interesting to look at.
Click to expand...
Click to collapse
I created a thread with the few pictures I took along the way, as well as the semi-finished project. The only thing I believe I still need to do at this point is get a screen protector. (Tablet still has the plastic cover on it from when it was in the box!) Other things may come up in the future, (such as adding an OTG cable if someone figures out a way to charge simultaneously) but this is it finished for the time being.
http://forum.xda-developers.com/showthread.php?p=29824916#post29824916
Thanks for making a thread! That is very cool, I like your setup a lot. Is the tablet meant to stay in the car permanently, or do you plan on taking it out often?
Alright, I haven't had much time to find much new information. But I was just thinking if I can't have it charge from the usb port and run usb audio out at the same time, then maybe I could take off the rear cover of the N7 and cut a hole in it, where the camera was supposed to go, and route positive an negative wires directly to the battery...then I could use a hacked usb cable to charge it...? Just the thought of that is scary, but I don't plan on taking out the N7 ever, it will always stay in the car.
Just a thought, let me know what you think.
Additional info: I am going to be putting this in an 02 e46 BMW 325xi. And I will use a modified double din face plate. In my head the final setup looks beautiful, but we'll see how it turns out. As for the time frame, I have a list of parts I want to get for the car, and I want to do most everything at the same time. It will take a good 3 or 4 months before I can get everything and then installing it might take another month(assuming everything goes smoothly) I just want to get all of my preliminary research out of the way. Sorry if you guys were expecting pictures soon.
Thanks
pikachu2000 said:
Alright, I haven't had much time to find much new information. But I was just thinking if I can't have it charge from the usb port and run usb audio out at the same time, then maybe I could take off the rear cover of the N7 and cut a hole in it, where the camera was supposed to go, and route positive an negative wires directly to the battery...then I could use a hacked usb cable to charge it...? Just the thought of that is scary, but I don't plan on taking out the N7 ever, it will always stay in the car.
Click to expand...
Click to collapse
What about the pogo pins? Aren't they for a [future] dock? I wonder if you can charge the tablet via the pogo pins and use USB OTG simultaneously? This would indeed be good news, because I will primarily use my N7 [when it arrives] for videos on a USB HDD, so it would wear out the battery to be constantly charging and discharging the battery every day.
mvmacd said:
What about the pogo pins?
Click to expand...
Click to collapse
Earlier in the thread we had thought of that, turns out you can only use one at a time, and it's a hardware limitation so no way around it.
I tried to look for slimport cable and there seems to be dozen of them on amazon most have negative reviews. which slimport do you guys use? is there one that support both slimport and MHL?
anybody? anyway I went ahead and bought one.
I bought this: http://www.ebay.com/itm/181322353837 It works fine for me.
diamond12 said:
I bought this: http://www.ebay.com/itm/181322353837 It works fine for me.
Click to expand...
Click to collapse
thanks I bought this one, looks similar from yours? I need to weight 7+ days since its coming from china
http://www.ebay.com/itm/221378511982?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
It looks the same except I don't think mine came in a box.
diamond12 said:
It looks the same except I don't think mine came in a box.
Click to expand...
Click to collapse
yeah looks the same hope it works. did you find it useful? I just want to occasionally hook it up to my hdtv
Yes, sure.
The phone gets hot even though the video player plays the video only on the TV and the phone screen turns off.
Also, it only charges slowly when connecting the charger to the dongle.
Compared to Miracast there is no delay but I have to leave the phone next to the TV as the cable isn't long enough.
diamond12 said:
Yes, sure.
The phone gets hot even though the video player plays the video only on the TV and the phone screen turns off.
Also, it only charges slowly when connecting the charger to the dongle.
Compared to Miracast there is no delay but I have to leave the phone next to the TV as the cable isn't long enough.
Click to expand...
Click to collapse
thanks, now I know what to expect. no Lag is the main reason I choose this over miracast and chromecast. I might get chromecast in the future though.
diamond12 said:
Yes, sure.
The phone gets hot even though the video player plays the video only on the TV and the phone screen turns off.
Also, it only charges slowly when connecting the charger to the dongle.
Compared to Miracast there is no delay but I have to leave the phone next to the TV as the cable isn't long enough.
Click to expand...
Click to collapse
hey man I got the cable it works but how do i get the correct aspect ratio. the top part of TV is cut of when on landscape mode? is there a fix or this normal?
or is it because I am on custom rom?
Damasterjj said:
hey man I got the cable it works but how do i get the correct aspect ratio. the top part of TV is cut of when on landscape mode? is there a fix or this normal?
Click to expand...
Click to collapse
The aspect ratio should be correct. As for TVs it is normal to crop a small frame around the image. Sometimes the TV has a TV/PC mode where it doesn't do cropping for PC. My old Motorola Atrix HD had an oversan adjustment that would shrink the image to compensate for the oversan. The G2 doesn't have such an option so if your TV doesn't either there's not much you can do.
diamond12 said:
The aspect ratio should be correct. As for TVs it is normal to crop a small frame around the image. Sometimes the TV has a TV/PC mode where it doesn't do cropping for PC. My old Motorola Atrix HD had an oversan adjustment that would shrink the image to compensate for the oversan. The G2 doesn't have such an option so if your TV doesn't either there's not much you can do.
Click to expand...
Click to collapse
The rom I am using has a mod to make navigation bar smaller. I am not sure if it mess up slimport aspect ratio. I might revert to stock rooted to make sure
I don't mind shrinking but the way it showing up on my TV I am losing some parts of the picture. for example I can't see 4G icon on landscape mode.
BTW, my TV says the signal is 1080p/60
Damasterjj said:
The rom I am using has a mod to make navigation bar smaller. I am not sure if it mess up slimport aspect ratio. I might revert to stock rooted to make sure
I don't mind shrinking but the way it showing up on my TV I am losing some parts of the picture. for example I can't see 4G icon on landscape mode.
BTW, my TV says the signal is 1080p/60
Click to expand...
Click to collapse
1080p60 is correct.
I think not only the top bar but also a smal part of the bottom, left and right sides shoud be hidden.
Try connecting to a computer monitor to confirm it's the TV doing it.
diamond12 said:
1080p60 is correct.
I think not only the top bar but also a smal part of the bottom, left and right sides shoud be hidden.
Try connecting to a computer monitor to confirm it's the TV doing it.
Click to expand...
Click to collapse
yeah small part of the left, buttom, and right is hidden
it doesn't work on my monitor via hdmi