Hi, first of all, I don't have my phone bricked, I'm on aosp and I want to test cloudy 3.3; I know I don't need to use a kdz method but as I didn't update official stock lollipop rom, I wan't to make a clean install.
The problem is that using any of the guides (kdz,tot method) I can't go further than entering in download mode, beacuse windows 10 isn't detecting the phone in download mode, I have installed the driver (different versions too) and nothing.. I'm desperate.
Has someone an idea??
Thanks
I suggest using windows 7.
audit13 said:
I suggest using windows 7.
Click to expand...
Click to collapse
I test it too, same problem..
Enviado desde mi LG-D802 mediante Tapatalk
When you connect the phone, nothing appears in device manager? When you boot to recovery, can you mount the any drive partitions so they appear in Windows File Explorer?
audit13 said:
When you connect the phone, nothing appears in device manager? When you boot to recovery, can you mount the any drive partitions so they appear in Windows File Explorer?
Click to expand...
Click to collapse
Exactly, do you think, maybe it's because I don't have installed adb drivers, I'm not at home I can't test it but it could be that the problem?
I'm really not sure but booting into TWRP should allow you to mount the partitions.
DId you install the LG United Mobile Driver?
http://www.mylgphones.com/lg-android-usb-device-drivers
SOLVED!!
What I did was install cloudystock KK and then connect it to the pc and windows installed the needed drivers, then when doind the steps for install a kdz when in download mode windows recognised the phone and then I could flash the new rom without a problem :highfive:
Related
My milestone 2 is completed bricked and can't be recognized by PC. But I can log in the official recovery screen. I have downloaded a update.zip file from a link (not sure if it is an official link, as I can't find it through Motorola website). It prompted "signature error" when installed. Not sure anyone can provide an update.zip file, so that I can try if I can save my Milestone2. Thanks in advance!
as long as you can enter the stock recovery. your device isn't bricked. did you try to do a full wipe in stock recovery? did you try to use another usb port in bootloader mode? sometimes you get a black screen in bootloader mode, but you pc recognizese your device very well. did you install all drivers on your pc?
lulli1 said:
as long as you can enter the stock recovery. your device isn't bricked. did you try to do a full wipe in stock recovery? did you try to use another usb port in bootloader mode? sometimes you get a black screen in bootloader mode, but you pc recognizese your device very well. did you install all drivers on your pc?
Click to expand...
Click to collapse
1. I have tried full wipe, but didn't work. The machine reboot again and again;
2. I have tried another usb port, another PC and even another operating system (win7 and winXP), also didn't work.
3. I am sure I have installed the drivers, as PC can recognize my phone when it is OK before;
As I can only entered the official recovery screen, I think I can try if it worked when I update with an official update file. Anyway, thanks for your suggestions and reply!
hi,guy.i think you should do the curect usb driver for your pc recongnizing first. than choose a ringt bootlaoder offical ROM. curse your phone can login the rockrecovery screen means its ok! isn't?
I think the only way for you to get an update.zip is with another milestone 2 running froyo, that way you can update it via OTA, and before the phone reboots, take the update.zip from the /cache partition.
Sent from the U
Hi,
I'll did a factory reset with TWRP via advanced,by accident all partitions,including the internal storage partition.
Now my phone does nothing, but i''m able to boot in to TWRP.
When i'm connecting my phone to my computer i'll see a error with the driver. I'll installed the LG drivers from the website. But still see a error with the driver.
Error message: There is no compatible driver installed for this device.
I'll need to push a ROM to the phone, anyone a idea ?
Thnx in advance.
Device: LG G2 D802 International
From twrp you can mount usb storage (your sdcard or internal memory)
-dFx-
ArneNL said:
Hi,
I'll did a factory reset with TWRP via advanced,by accident all partitions,including the internal storage partition.
Now my phone does nothing, but i''m able to boot in to TWRP.
When i'm connecting my phone to my computer i'll see a error with the driver. I'll installed the LG drivers from the website. But still see a error with the driver.
Error message: There is no compatible driver installed for this device.
I'll need to push a ROM to the phone, anyone a idea ?
Thnx in advance.
Device: LG G2 D802 International
Click to expand...
Click to collapse
If you have a USB OTG cable, load ROM/gapps/etc onto a thumb drive and connect to your device. In TWRP, go to mount and select USB. Go back to main menu and select install. Scroll for USB and select files.
I'll solved the problem. I'll reinstalled the drivers, restarted my computer and the supporttool regonized my Phone again. I flashed the stock rom via downloadmode.
Thnx for your answer.
Sent from my GT-I9505 using XDA Free mobile app
I have a new and unique problem with my set Ls980 (LG G2). I dig down all xda and other forums from last week. But no use till now. So i need some good help from experts . Ok here is the situation . I have Lg g2 ls980 (sprint) i rooted it to flash some LP custom rom in it. i installed RECURRECTION REMIX LOLLIPOP ROM in it successfully along with it's gapps. After reboot i got my phone in boot loop. now the current situation is that
1- I have nothing on my phone everything wiped out. no rom backup or anything else on my phone memory.
2- I have stock recovery (pictures attached).
3- I have broken download mode. ( so i can't attach my phone to lg flash tool) picture attached.
4- I am stuck on boot loop with cm11 M5 ( last rom installed using adb sideload option from stock rom)
5- No fastboot mode.
Please guide me to recover my soft bricked phone.
Did you try Tot method? What happens when you plug your phone to pc? Does adb recognize your device?
ceza1380 said:
Did you try Tot method? What happens when you plug your phone to pc? Does adb recognize your device?
Click to expand...
Click to collapse
How can i try tot method without going to download mode ? as i said phone only have stock recovery , Yes there is an option in stock recovery "Apply update from ADB" by selecting that i can run adb sideload commands. And i can flash any zip rom from that option . I tried several rom's using this option but installation aborted in middle .
Does device manager in Windows recognize your device? In Tot method you do port settings to flash kdz. Also you can give it a try for LG pc suite.
hi there i wanted to have efs partition backup so i have followed the procedure mentioned in this thread http://forum.xda-developers.com/show....php?t=2451390
now the situation is lg logo appears then screen goes blank and green led light flashing all the time i think the device has bricked carrier is verizon vs980 running on stock rom vs98012b and what exactly i did, copied "LG_G2_Backup_EFS_Final.zip" into phone's memory then first i install the "VS980_AutoRec.apk" package then opened it then it installs TWRP v2.7 then phone booted into twrp recovery mode i tapped on INSTALL then select "LG_G2_Backup_EFS_Final.zip" file
now is there any way to fix this i have download mode available and twrp mode available
i have the same problem as you please help us any idea ??
my phone has twrp v2.7 installed but the problem is my pc is not detecting my device whenever i connect it to pc i have seen yellow question mark in the device manager on "LG VS980" can somebody help me finding the drivers after that i will use the adb to push the rom file "LG-G2-VZW-OTA-VS98012B" into sdcard then flash it
wizzy900 said:
my phone has twrp v2.7 installed but the problem is my pc is not detecting my device whenever i connect it to pc i have seen yellow question mark in the device manager on "LG VS980" can somebody help me finding the drivers after that i will use the adb to push the rom file "LG-G2-VZW-OTA-VS98012B" into sdcard then flash it
Click to expand...
Click to collapse
Install the Universal ADB Drivers.
Hello,
I have installed a custom rom (Marshmallow) for my SM-A500FU through the adb. Now when I want to install a different rom I have to either boot into TWRP and I can't do that because booting into recovery simply restarts a phone, or I have to boot into Download mode and install it with the adb. The problem is that when the system is running, the phone simply charges, no Windows notifications or devices appear and when the phone is in Download mode Windows detects that a device is plugged in but can't recognize it. I have all the adb drivers, KIES and all that so it's not a problem. Can I somehow boot into TWRP or make Windows recognize my phone so I can use adb?
Thanks.
before installing a rom, have you wiped system, cache, dalvik and data? If yes try with a hard reset and if it doesn't work, too flash stock firmware
Hey,
yes, I wiped everything, I have flashed many roms earlier and I believe I have flashed it properly. I have managed to get into TWRP so I can actually flash FWs. I have only updated my rom to the newest CW13 build there is for my A5. Is there any way to flash a stock FW (for example a XEO KitKat) without ODIN? I can only use ADB through TCPIP and TWRP, so there is no way for me to flash it through ODIN.
Thanks.
so, if you press power+home+vol- it doesn't reboot in download mode, right?
It does boot into the Download mode. The problem is that when I plug the phone into my PC in Download mode it says that the USB Device is not recognized in Windows with 'A request for the USB device descriptor failed' error. When I plug it in when the phone is booted normally into android, it just charges, Windows doesn't see it at all.
whzq said:
It does boot into the Download mode. The problem is that when I plug the phone into my PC in Download mode it says that the USB Device is not recognized in Windows with 'A request for the USB device descriptor failed' error. When I plug it in when the phone is booted normally into android, it just charges, Windows doesn't see it at all.
Click to expand...
Click to collapse
Well, you can't flash samsung firmwares with twrp. Try flashing another rom through twrp
Alright, I have tried to flash multiple ROMs. Currently sitting on a Lollipop. Nothing changed, though. On every single ROM the problem still persists. It's not a problem with the PC as I've tried to connect my A5 to a laptop with freshly installed Windows and KIES and it behaved the same way as on my PC. The cable is fine as well, I have tested it with my old SGS3, it worked just fine on both my PC and laptop. Frankly, I have no idea what to do next, I'm starting to think that the port is physically broken. It's weird though, as I can still charge my phone and there is a response when the phone is in Download mode, just that Windows can't recognize it.
Try with adb command "adb reboot recovery" if it doesn't work you can downlaod odin mobile from play store and flash stock firmware!
Do you have odin for windows ?
zyxw-androidiani said:
Try with adb command "adb reboot recovery" if it doesn't work you can downlaod odin mobile from play store and flash stock firmware!
Do you have odin for windows ?
Click to expand...
Click to collapse
Yes, ihlf his device can boot he can use mobile odin. Have you tried with other PCs, just to see it isn't a problem of your pc?
In my experience usb device descriptor errors are related to the specific PC the error occurs on due to device driver conflicts, but if you get the same error on another pc then it could be the hardware.
I'd certainly be trying another cable first on a fresh PC.
Anyway regardless of all that you can flash the stock firmware with FLASHFIRE available on play as long as you have root.
Sent from my SM-T280 using XDA-Developers mobile app