Related
I was finally able to obtain the PRL file for 60677. I have updated my site with the new changes in the file. Check my sig for the files.
No link to download it?
The analysis or PRL itself?
prl itself
Thanks, updaed my prl
Sent from my SPH-D700 using XDA App
digiblur said:
I was finally able to obtain the PRL file for 60677. I have updated my site with the new changes in the file. Check my sig for the files.
Click to expand...
Click to collapse
I really appreciate your work. Being a cell phone network junkie I think this is great to have.
I stay on top of updating my PRL but could you explain to me what exactly this info is telling us?
Example:
SID: 4183 - Sprint PCS - San Francisco Oakland San Jose CA - Priority: More - Roaming Ind:Native
1X Scan: PCS/50 PCS/25 PCS/200 PCS/100 PCS/75 PCS/350 PCS/925 PCS/325 PCS/375
EV Scan: Sprint - 0084:0AC0(Same) - PCS/25 PCS/50 PCS/150 PCS/475 PCS/550 PCS/625 PCS/650 PCS/375
Click to expand...
Click to collapse
digiblur said:
The analysis or PRL itself?
Click to expand...
Click to collapse
im looking for the prl itself to write in QPST
found it: attached
so what i do with this???
Ree$e said:
so what i do with this???
Click to expand...
Click to collapse
dont try to flash the zip i posted in CWM or anything.... you have to download qualcomm product support tools
extract the zip file i had to your desktop
turn usb debugging on your phone
adb shell getprop ril.MSL
write down the 6 digit number
disconnect usb cable
turn off usb debugging
type ##8778# in your dialer
make USB and UART modem instead of pda
plug phone into usb (it'll install drivers you might need to restart pc i forget)
open QPST, add port, uncheck the "show only" box click the usb port you plugged your phone into
on the top click start clients//service programming
click your phone and start
go to the roam tab
hit read from phone
enter your MSL 6-digit #
in the "enable perferred roaming" box click browse and point to the prl file you want
click write to phone, it will reboot, and your prl is updated
edit: forgot to mention after you're done enter ##8778# again and change usb back to pda (uart stays as modem)
You guys are aware that a 61677 PRL is up and out right?..
If not you can check it out in the Optimus V forum: http://forum.xda-developers.com/showthread.php?t=991668
Been doing major testing on both the 61 & the 60 version I see no difference as of yet..
However the code is different so something must be up with it..
61 is a modded one
does it add 3g roaming?
Can we use that one?
churro7 said:
61 is a modded one
does it add 3g roaming?
Click to expand...
Click to collapse
Sent from my Epic 4G using XDA Premium app
jeffyv2 said:
Can we use that one?
Sent from my Epic 4G using XDA Premium app
Click to expand...
Click to collapse
Don't, Virgin Mobile only uses Sprint Towers. No roaming is allowed on Virgin Mobile.
i updated to the 60677 and everything seems to work fine and i live in the dallas tx area so if anyone wants to update to 60677 and lives in the dallas area they can !!! good luck
First install ORBOT from market then when ORBOT is ready . install PANDORA apk that u can find on the internet (many places) and start it..
NOTE:
FIrst install of ORBOT takes time ..
sometimes PANDora might report wrong country then u have to "kill" it ..stop orbot and then start ORBot and then fire PANdora...It works and i love it !!!!!
EDIT !!:
guys sometimes PANDORA wont work following above steps but there is a fix follow the steps below IT WORKS HUNDRED PERCENT NOW !!!!
EDIT : as pointed out by juan in the thread exit nodes change overtime , using {us} in exit nodes field to make sure always node in US are used.
1. GO to orbot settings then go to the option "exit nodes"
2. Enter the FOLLOWING pick any four/five of these and enter there as shown in image attached
Amunet2, Amunet3, Amunet5, CCN2, peter, 1337Relay, 5tr3ckrava, akVidaliaTor, alecto, Amunet11, Aquillar
as shown in image below
3. Check the "strict nodes" option
4. Select Pandora for proxy as above if you have not done it before
5. Start orbot and once connected fire PAndora
6. Enjoy !!!
thanks a lot !
I'll try this right now !
It's not working for me... It keeps saying "Sorry, Pandora is not available in this country"...
work pretty well for me, try to stop and init orbot again, and then start pandora.
If doesn't work then verify in the orbot conf that you have pandora app to route through tor.
onlymeipse said:
It's not working for me... It keeps saying "Sorry, Pandora is not available in this country"...
Click to expand...
Click to collapse
same was with me, I already tried this earlier but with no luck.
I read that somebody could use it with orbot + asproxy, but I've no idea how asproxy works...
FIrst post updated!! Guys It works now ..No asproxy no other headaches..I love my phone just because it runs PANDORA !!
WTF it worked but when I skipped song it gave me that damn error...
Edit: I've restarted tor and now seems to work perfectly
U need to add those exit nodes..I havent had a single problem after that
Ran into this Pandora app that has a transparent widget. I installed it and placed the transparent widget in my homescreen. When I tried to run it though, I got the ff. error:
Unexpected JSON error occurred: Value <body><html><a of type java.lang.String cannot be converted to JSONObject while StartupAsyncTask
Click to expand...
Click to collapse
So I thought, oh maybe because it's a modded Pandora app. I'll try the original from the Market. I did. Got the same error.
Next I thought, maybe it detected that I'm not from the US (I'm from the Philippines). I followed the instructions shown here in this thread, which worked for me before. But now, I still got the same error.
Any ideas, guys???
worked for me
thanks
Im in Canada with a LG P500
Thanks!
Thanks! Helpful!
Tried this today and it still works...Clicked thanks for original poster.
I'm deployed overseas and this makes my life! I did have to check "use default iptables" or else it would give me a warning and fail to start up.
Another simpler way is to install droidvpn and then use pandora
Sent from my MB865 using xda premium
farzii said:
Another simpler way is to install droidvpn and then use pandora
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Droidvpn is another way to do it but I wouldn't say its easier. With orbot you just enter working nodes and you are good to go. It doesn't have bandwidth limit or need and account like droidvnp.
neotekz said:
Droidvpn is another way to do it but I wouldn't say its easier. With orbot you just enter working nodes and you are good to go. It doesn't have bandwidth limit or need and account like droidvnp.
Click to expand...
Click to collapse
I tried orbot but it always gives me error : error configuring transparent proxy.
U seem to have used it.any solution?
Thanks in advance
Sent from my MB865 using xda premium
sarfaraz1989 said:
First install ORBOT from market then when ORBOT is ready . install PANDORA apk that u can find on the internet (many places) and start it..
1. GO to orbot settings then go to the option "exit nodes"
2. Enter the FOLLOWING pick any four/five of these and enter there as shown in image attached
Amunet2, Amunet3, Amunet5, CCN2, peter, 1337Relay, 5tr3ckrava, akVidaliaTor, alecto, Amunet11, Aquillar
as shown in image below
3. Check the "strict nodes" option
4. Select Pandora for proxy as above if you have not done it before
5. Start orbot and once connected fire PAndora
6. Enjoy !!! [/B]
Click to expand...
Click to collapse
Nodes change over time, I use {us} on exit nodes, and still working.
Indeed, using
Code:
{US}
as exit node will route you through any US proxy!
Rooted
XXXKB3
Deodexed
Til nw i used to use WiFi, bt nw onwarda i wud b outdoors most of the time so i activated a 2G GPRS plan (cos 3G is stl costly around here, and i need data heavy plan)
Bt sadly m nt able to.download any apps with it frm d market. Cn open and.browse.the marlet bt cnt download.
Wen i click on install
It says
Starting download...
Download Paused...
And stays lik tat forevr.
M able.to download stuff frm marlet with.tis same sim and plan at my frd's I9000...
Any suggestions as to.how to fix tis issue?
ggclanlord said:
Rooted
XXXKB3
Deodexed
Til nw i used to use WiFi, bt nw onwarda i wud b outdoors most of the time so i activated a 2G GPRS plan (cos 3G is stl costly around here, and i need data heavy plan)
Bt sadly m nt able to.download any apps with it frm d market. Cn open and.browse.the marlet bt cnt download.
Wen i click on install
It says
Starting download...
Download Paused...
And stays lik tat forevr.
M able.to download stuff frm marlet with.tis same sim and plan at my frd's I9000...
Any suggestions as to.how to fix tis issue?
Click to expand...
Click to collapse
Do you use some firewall applications like Droidwall? if yes, you have to enable application #10018: Multimedia, DRM files, Download Manager (sorry if I'm wrong with names I don't see English name of this application)
Yea it ws cos of d firewall.
Thnks bro.
falex007 said:
Do you use some firewall applications like Droidwall? if yes, you have to enable application #10018: Multimedia, DRM files, Download Manager (sorry if I'm wrong with names I don't see English name of this application)
Click to expand...
Click to collapse
any help here would be great......upgraded to 3.0 everything is running good, installed twrp, rooted, the only issue that's driving me mad is that I installed kodi 16(latest) and when trying to add file source like fusion I get unable to connect couldn't retrieve directory information, this could be due to the network not being connected?????? wtf network is connected...back to nvidia to check where kodi is with it's data....
dillfever said:
any help here would be great......upgraded to 3.0 everything is running good, installed twrp, rooted, the only issue that's driving me mad is that I installed kodi 16(latest) and when trying to add file source like fusion I get unable to connect couldn't retrieve directory information, this could be due to the network not being connected?????? wtf network is connected...back to nvidia to check where kodi is with it's data....
Click to expand...
Click to collapse
The fault you described is normally caused by the wrong address entered.
dillfever said:
any help here would be great......upgraded to 3.0 everything is running good, installed twrp, rooted, the only issue that's driving me mad is that I installed kodi 16(latest) and when trying to add file source like fusion I get unable to connect couldn't retrieve directory information, this could be due to the network not being connected?????? wtf network is connected...back to nvidia to check where kodi is with it's data....
Click to expand...
Click to collapse
Yes works fine here, check address, also try it on pc first to make sure it works.
was working fine on 5.1, retype at least 6 times same error, not just fusion url but any that I try....
dillfever said:
was working fine on 5.1, retype at least 6 times same error, not just fusion url but any that I try....
Click to expand...
Click to collapse
ok all is good, had to hook up to line not wifi and no problems at all, except why it wouldn't work on wifi???? oh well loaded what I wanted.....dill
gffmac said:
Yes works fine here, check address, also try it on pc first to make sure it works.
Click to expand...
Click to collapse
I think you need to connect to LAN first and then unplug and wifi should be working. I had similar issue with wifi after installing a fresh custom ROM.
dillfever said:
ok all is good, had to hook up to line not wifi and no problems at all, except why it wouldn't work on wifi???? oh well loaded what I wanted.....dill
Click to expand...
Click to collapse
Over the last week I have tried several (6+) times to download NPJS25.93-14-13 from Android File Host without success. The farthest it has gone is about 75% with 20%- to 25% being typical. It will then stop with the error "Download interrupted" even though there is no other task or program running on my PC. Though I have recently built a new PC and swapped it with my old one, I have no issues downloading from any other site and have downloaded several gigabytes of files over the last few days. I do not know if it is limited to rajatgupta1998's AFH folder or if it is a problem with any AFH folder. I finally set up my old PC and copied the file from my hard drive on that PC.
Anyhow, has anybody else experienced this issue?
@pastorbob62 that's strange... I can download without issues even from the farthest mirror. Did you tried other mirrors?
strongst said:
@pastorbob62 that's strange... I can download without issues even from the farthest mirror. Did you tried other mirrors?
Click to expand...
Click to collapse
Yup! I tried every mirror available at the time. I also tried downloading Lineage 15 from AFH with the same results. And I have no problem at all downloading from other sites all over the internet. Maybe it's a USA thing? I dunno.
AFH has this server problem. i had to download files at 100 kbps, whereas downloading from another sites it's 1 mbps-2mbps
Try using http://savetodrive.net/
You can save any file directly to Google Drive.
I use it all the time.
Please let me know if you need any further assistance.