Root Lenovo K3 Note India (k50a40) - K3 Note General

Hello everyone.
Today I'm going to show you how to root Lenovo K3 Note India.
Pre-Requisites :
Lenovo USB Tools – Download it from here: https://userscloud.com/n7zmi1utn6wz
Flash Tools – Download it from here. https://userscloud.com/958tvsa17724
CWM Recovery Image and Scatter Text File (Developer – liuxinghost)- Download it from here. https://userscloud.com/yexc173ibpv8
Update.zip - Download it from here. https://userscloud.com/o8m7u398nmv5
How to Install CWM on Lenovo K3 Note :
Things to do before you Root Lenovo L3 Note :
Take a backup of your data. We don’t guarantee if something is erased. Always take precautions .
Enable USB Debugging on your device.
Goto > Settings > Developer Options > USB Debugging.
If Developer Options is not located under settings then enable it by going toSettings > About Phone > Device Info and tap on Build Number for about 7-8 times. And then go back and follow previous step.
Make sure the battery is 50% charged or more.
Go to Settings > Security and enable Unknown Sources option.
How to Install CWM on Lenovo K3 Note :
Step 1 : Extract the LenovoUsbDriver_Techolaty.Net.rar and install the software in your PC.
Step 2 : Extract the Flash_Tools_Techolaty.Net.rar file and then open flash_tool.exe (run it as an administrator) Also Extract Recovery_Lemon_K3_Note_Techolaty.Net.rar in the same folder.
Step 3 : Now select MT6752_Android_scatter.txt .
Step 4 : Click on Options from the top then Download and make sure DA DL all with Checksum is checked.
Step 5 : Now just tick the checkbox recovery and browse to the extracted files and locate recovery.img
Step 6 : Now remove the battery of your phone & connect USB cable. Wait for 10 seconds & press the download button on PC. Then wait 05 seconds & insert battery in phone without removing USB cable. Wait for seconds & then Congrats !! CWM Recovery installed.
Steps to enter Recovery mode in Lenovo K3 Note
Press and hold the Volume Down Button + Volume Up Button + Power Button.
When you see the Boot Screen, Release the Power Button but keep the Volume Buttons pressed until you see the Recovery Screen.
How to Root Lenovo K3 Note :
Step 1 : Copy the UPDATE-SuperSU-v2.46.zip file in your SD card root folder
Step 2 : Enter/Reboot to recovery mode on your device
Step 3 : Select the UPDATE-SuperSU-v2.46.zip file and click update to root lenovo k3 note
Congrats !! YOur device is rooted now!!
You can confirm your device is rooted or not by downloading the Root Check application from Playstore.
If there any query then kindly comment or contact me & @arunshanker.

Works like a charm. Finally get rooted. Thanks :good:
But the CWM recovery is in Chinese language.
How can I change that to English ?

There is no option to change that Chinese language. If you want to use recovery in English then you should switch from CWM Recovery to TWRP Recovery. Its better than CWM Recovery. Here is link to download TWRP Recovery for Lenovo K3 Note.
lenovo-forums.ru/index.php?app=core&module=attach&section=attach&attach_id=38939
You can change your recovery with my given method with spftools like you done your recovery installation before. Enjoy.
Sent from my Lenovo K50-t5 using XDA Free mobile app

my phone isnot starting after this please help

Step 5 - Checkbox recovery
Thanks. It's rooted now.

Is it really safe to root with FlashTool bcuz i heard that using this method is dangerous pls tell me .... M new to this though i've rooted 3 phones before but my last one asus zenfone 5 got bricked after rooting and using for almost 2 weeks but after that it's os was deleted n m regretting bout it but i too desperate to root k3 note k50a40 as there's to ram occupation n no option for themes etc..

thx.

Unrooting
will we be able to unroot and get OTA from Lenovo system updates.. Please tell me else I would end up bricking the device after updates..

Thanks for all your work !

Su is not getting updated
My su binary is not getting updated ..recovery is not flashing the update file but I've noticed its showing both of the language English and Chinese.. What to do stuck here..plz help..and yah I've tried changing the name of the file too..then too its not getting updated yaar. Do something

while rooting i had reached this step
Step 6 : Now remove the battery of your phone & connect USB cable. Wait for 10 seconds & press the download button on PC. Then wait 05 seconds & insert battery in phone without removing USB cable. Wait for seconds & then Congrats !! CWM Recovery installed.
BUT after removing batery i tried starting my mobile but it wont start
i removed usb cancelled everything but still its not powering on plz help

ishan dixit said:
my phone isnot starting after this please help
Click to expand...
Click to collapse
You should flash your mobile using spftools.

real_sam said:
Is it really safe to root with FlashTool bcuz i heard that using this method is dangerous pls tell me .... M new to this though i've rooted 3 phones before but my last one asus zenfone 5 got bricked after rooting and using for almost 2 weeks but after that it's os was deleted n m regretting bout it but i too desperate to root k3 note k50a40 as there's to ram occupation n no option for themes etc..
Click to expand...
Click to collapse
If you root your mobile carefully step by step as I given then no issues. I am also using K3 note.

Vedansh17 said:
will we be able to unroot and get OTA from Lenovo system updates.. Please tell me else I would end up bricking the device after updates..
Click to expand...
Click to collapse
You should try official Chinese rom of Lenovo K3 note as its best & secure rom. You can download it from official vibe ui website.

Rup shah said:
My su binary is not getting updated ..recovery is not flashing the update file but I've noticed its showing both of the language English and Chinese.. What to do stuck here..plz help..and yah I've tried changing the name of the file too..then too its not getting updated yaar. Do something
Click to expand...
Click to collapse
Unroot you mobile in option from SuperSu application & reboot you device. After reboot, go to recovery mode & install updatesu.zip again.

shubhamsasmal said:
while rooting i had reached this step
Step 6 : Now remove the battery of your phone & connect USB cable. Wait for 10 seconds & press the download button on PC. Then wait 05 seconds & insert battery in phone without removing USB cable. Wait for seconds & then Congrats !! CWM Recovery installed.
BUT after removing batery i tried starting my mobile but it wont start
i removed usb cancelled everything but still its not powering on plz help
Click to expand...
Click to collapse
1st remove battery then connect with usb then press download & then after inser battery. You'll see installing line in spftools.

i can't update supersu.zip using recovery mode. WHY?

shyamhot said:
i can't update supersu.zip using recovery mode. WHY?
Click to expand...
Click to collapse
Which recovery you are using?

Thanks bro.
Keep up the good work.
Finally able to remove bloatwares(was irritating me much).
BTW use TWRp.

I guess the adb & fastboot method is far better, safe and quicker method than the SPFtools. Another xda forums thready can be referred for the method.
http://forum.xda-developers.com/k3-note/general/ufficial-thread-lenovo-k3-note-t3102997

Related

[HOW TO] Restore your tablet to stock + Reroot + Flash New Recovery

Before doing anything, make a backup to your external MicroSD card before continuing. Even if this method is very safe, and has been done several times without problems, we can't predict anything that may happen during the process.
RESTORE YOUR TABLET TO STOCK, APPLY ROOT, THEN FLASH A NEW RECOVERY.
This tutorial applies to both P3110 and P3113. They are the exact same models.​
REQUIRED:
Odin ( Take any version you wish. The latest ones should do the trick )
The stock Firmware file. Concerning this part, Google is your friend.
The official Samsung USB Cable that came with your tablet. It is recommended (but optional) to connect your tablet into your computer's built-in USB ports.
The latest Odin-flashable recovery. ( P3113 uses P3110 files )
CF-Auto-Root
Patience
Returning your device to a like-new state.:
1. Boot into Recovery Mode. This can be achieved by holding Volume Up + Power when your device is powered off.
2. Wipe all data. [ Factory Reset ( /data /cache ), System ( /system ) and Internal Data ( /media/storage )
3. Reboot into Download Mode. Usually found on the Advanced Options of most CWM-based recoveries.
It happens that your Tablet cannot boot into Download Mode due to various reasons. There is a battery trick that can be achieved. Do it when you absolutely cannot boot into Download Mode.
1. Remove your tablet's battery.
2. Connect your tablet to your computer
3. Your device should automatically boot into Download Mode.
4. Put back your Battery back into your device.
Click to expand...
Click to collapse
4. Connect your Tab to your Computer
5. Run Odin as Administrator + Windows XP SP3 Compatibility Mode ( Right-Click > Run as Administrator // Right-Click > Properities > Compatibility > Windows XP Service Pack 3 )
6. Click the "PDA" button, and select the previously-downloaded firmware file.
7. Press Start ( Do not check repartition. It will totally screw up your device. )
8. The installation process will overwrite all data on your device and install the stock firmware.
9. You are done.
Click to expand...
Click to collapse
Rerooting your device.
1. Reboot your device into Download Mode. From there, you are not obligated to connect your device to your computer.
2. Open Odin as Administrator + Windows XP SP3 Compatibility
3. Connect your Device to the computer.
4. Click on PDA and select the CF-Auto-Root package you previously downloaded
5. Click Start, with Auto Reboot Checked! Again, do not check "Repartition" as it may screw up your device.
6. Wait until it's done.
Click to expand...
Click to collapse
Installing CWM Advanced Recovery!
1. Reboot your device in Download Mode.
2. Open Odin as Administrator + Windows XP SP3 Compatibility
3. Connect your Device to the computer.
4. Click on PDA and browse the Odin-packed CWM package you downloaded.
5. Click Start, with Auto Reboot Checked! Again, do not check "Repartition" as it may screw up your device.
6. Wait until it's done.
Click to expand...
Click to collapse
Press the thanks button if this tutorial helped you.
If you have any problems, feel free to post in the thread. tho I won't probably help you.
Nice guide, but don't we have enough?
Sent from my GT-P3113 using Tapatalk HD
Luigi2012SM64DS said:
Nice guide, but don't we have enough?
Sent from my GT-P3113 using Tapatalk HD
Click to expand...
Click to collapse
Yup.... I think there are enough guide avout this....
Sent from my GT-I9300 using xda premium
OK, but first I must install Triangle Away to reset the counter and next I use Odin and recover original rom.
-_-
as007 said:
OK, but first I must install Triangle Away to reset the counter and next I use Odin and recover original rom.
Click to expand...
Click to collapse
Bro... You have to understand properly... Lame Juniors..
I AM NOT JUNIOR.. I JUST HAVE JOINED XDA FORUMS LATE!!:good:
In op page it is mention about battery remove /in , but my GT p3100 does not have such option, battery is permanently fixed .
Sent from my GT-P3100 using xda premium
Well when i use Customrom CM 10.1 i decide to back on Stockrom, i format my system and clear all my data so my tab was totaly clean even my customrom was gone so i flash it to stockrom. and yes my tab was totaly FRESH! :good:
idhbar said:
In op page it is mention about battery remove /in , but my GT p3100 does not have such option, battery is permanently fixed .
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Just fellow the simple instruction: Hold Volume Down and Power when your tablet is off to go in Download Mode.
Contact me for further assistance
WaryLouka said:
Just fellow the simple instruction: Hold Volume Down and Power when your tablet is off to go in Download Mode.
Contact me for further assistance
Click to expand...
Click to collapse
Hi, I have PA installed with TWRP installed. I downloaded my firmware from http://samsung-updates.com/. Do I need to flash the stock kernel as well? and stock recovery? Sorry for the noob question.
Maybe I'm just missing it, but I've gone to a couple of firmware sites and I can't find US firmware. Is there anywhere I can get that?
Does anyone have a link that's not to one of these stupid-ass, lame, @#$%ing pay download sites?
3 hours for firmware? WTF?
jdCaptivate said:
Does anyone have a link that's not to one of these stupid-ass, lame, @#$%ing pay download sites?
3 hours for firmware? WTF?
Click to expand...
Click to collapse
Latest P3113UECMH2 (4.2.2) : http://hotfile.com/dl/241707705/3ce5c6f/XAR-P3113UECMH2-20130826170038.zip.html
Or : http://uploaded.net/file/oadonsrj
Bibicp said:
Latest P3113UECMH2 (4.2.2)
Click to expand...
Click to collapse
TYVM!
jdCaptivate said:
TYVM!
Click to expand...
Click to collapse
Don't say thanks: press it.
Thanks I'm on 4.2.2 now
Dead Tab2?
WaryLouka said:
Just fellow the simple instruction: Hold Volume Down and Power when your tablet is off to go in Download Mode.
Contact me for further assistance
Click to expand...
Click to collapse
I have a similar situation. A previous rooting operation on my Tab2 7 P3113TS was either bad or partial and it appears it will not go into the download mode. power-pgup, power-pgdn, or just power all go to the Samsung splash screen then to a blue VeinDroid rom screen but no further. I tried 3 different version of ODIN and all recognize the device (port goes yellow) but cannot communicate. It stops at the SetupConnection step. Is this thing toast or is there something I'm missing?
WaryLouka said:
If a message is shown, press Volume Up. If you can't enter downloadmode normally, try doing "adb reboot download" in ADB. If you still can't, connect your phone to your computer, REMOVE THE BATTERY, hold Volume Up/Down + Power until DownloadMode is entered and put the battery in again. If your phone doesn't boot or/and battery trick doesn't work, use an USB Jig. If theres no usb jig, while until the battery icon is shown ( charging ) then do "adb reboot download" in ADB.
Click to expand...
Click to collapse
Are you serious????
REMOVE THE BATTERY????
I think it's not recommended to do anything like this only because of flashing a Fw, isn't it?^^
help plz
Hi I lost my /efs files for my samsung galaxy tab 2 p3113 how do I fix this proble If some one can help me I would be very graitfull
Great!thanls for The tutorial
Sent from my Ativ S using Tapatalk
antkiller said:
Hi I lost my /efs files for my samsung galaxy tab 2 p3113 how do I fix this proble If some one can help me I would be very graitfull
Click to expand...
Click to collapse
do you have a backup?

Asus Zenfone 5 (T00J) Lollipop - Unable To Root

tried everything , every possible and suggested way...
with zenfone rootkit, showing 'Rooting Please Wait, Waiting For Device' on pc screen and 'Fastboot Cmd Waiting' on mobile screen...
tried with different ADB installer versions...
tried with rootzenfone app for mobile...
also with kingroot...
with pc & without pc...
still nothing
if someone know the solution please convey...
thanx in advance...
Asus zenfone 5 is one of the best devices from the Asus and recently it
also got the lollipop 5.0 update as promised by the company but this is
not the topic I am here to discuss the most easy way to root your asus
zenfone 5 and I already published a video guide on it on our YouTube
channel its HowTrends. So, those guys who are facing problems and tried
a lot of thing to root asus zenfone 5 and at the end they failed, we
recommend them to go through this simple, easy and one click root
procedure.
This rooting procedure is tested on the Asus Zenfone 5 (CG501) Android
Lollipop 5.0 and Android Kitkat 4.4.2 V2.21.40.44 and working fine.
However if something goes wrong by your mistake then please don't held
I m not responsible for it, so go ahead at your own risk ..
Pre-Required files:
1.Asus Zenfone 5 Lollipop Rootkit
Http://d-h.st/0S31
2. Asus Zenfone 5 Kitkat Rootkit
www.mediafire.com/download/mjg542cd5w8my7w/HowTrends-RootZenFone5KitKatv4-ww.zip
3. Intel adb drivers for PC
www.mediafire.com/download/hxjosurat8o6ubk/HowTrends-IntelAndroidDrvSetup1.1.5.exe
Step to Root Asus Zenfone 5 Lollipop/Kitkat:
Download intel drivers and install it to your PC and the download the
RootKit as per your android version lollipop or kitkat to your PC. (i.e for
kitkat download kitkat root kit and for lollipop download lollipop root kit)
Enable usb debugging on your asus zenfone 5. To enable it first go to
settings > about phone > system information > build number. Tap 7 times
on build number and you will get the devloper settings in your android
settings.
Go to developer settings and enable USB debugging and connect your
phone with PC via usb cable and you will get a popup on your phone
select there always allow.
Refer pic 1
This is all you need to do with your Asus Zenfone 5. Now go to the folder
where you downloaded the root kit.
Rootkit will be a zip file so first unzip it and then press and hold shift
button and right click on file folder and you will see "open command
window here" option. choose it.
Now in command box type "adb devices" (without comma) and hit enter
and if you get "demon started successfully" message in command then
close that command and go ahead to the next step. otherwise try again
all above steps.
Refer pic 2
This will be the final step, open file Root-zenfone.bat and wait till that
window close automatically, during this process your phone will be
rebooted 4-5 times but no need to worry it is the part of the rooting
process.
Once your device bootup and starts then search for SuperSu app in your
app list, if supersu app is there it means you have successfully rooted your Asus Zenfone 5 then you can unplug your device from PC and enjoy the root features to your Asus Zenfone 5.
Pic 3
Pic for understanding..
thnks for ur reply...
downloaded intel drivers from the given link but while installing the error showing up that 'This OS Not Supported-Windows'...
before this i download version 1.10.0 from its official website...
when i type adb devices in command prompt its showing my device in 'List Of Attached Devices' but after i run Root.bat and starts the process by pressing any key my phone shuts down and start the fastboot mode and it shows 'fastboot cmd waiting' and on pc it shows 'rooting be patient, waiting for device' at that time if i type 'adb devices' in command prompt then its showing 'List Of Attached Device' empty...
should i try with some other pc...
im using windows 8.1...
I m also using Windows 8.1
Do one thing go to fastboot mode then open root.bat in word pad the insert manually cmd in cmd ...examples fastboot <something> etc..all cmds copy from root.bat which is open in word pad then paste one by one cmd in cmd promt it will 100% work good luck
new to this things so unable to understand...
tried...
but out of my mind...
plz elaborate or give any screenshots...
I will tell u with screenshot tomorrow i m busy now... with explanation..
thats so nice of u brada... thnx alot in advance...
Step 1: go ro bootloader by pressing hold and press power + up volume key.
Step 2: go to How to trends zenfone 5 Lolipop root folder means i already give u link for that. Download it.
Step 3: goto files folder which is present in how to trends zenfone 5 lollipop root folder.
Take look in pic.
Hold left shift and right click that opens cmd prompt below codes just copy paste one bye one into cmd prompt.
fastboot flash /system/bin/resize2fs magic
fastboot flash /system/bin/tune2fs busybox
fastboot flash /system/bin/partlink supersu.tgz
fastboot oem start_partitioning
fastboot flash /system/bin/logcat installer
fastboot oem stop_partitioning
fastboot reboot
Done i hope u understand...
Look in...u can easily understand what i m saying..
Success...!!! - Zenfone 5 rooted...!
thnk u so much bro...
thnx alot for ur help & time...
finally got root access...
now i can use my data card directly on my mobile using OTG cable and with ppp widget 2...
thnx again...
vnyukey said:
thnk u so much bro...
thnx alot for ur help & time...
finally got root access...
now i can use my data card directly on my mobile using OTG cable and with ppp widget 2...
thnx again...
Click to expand...
Click to collapse
It works 100 % ...my pleasure hehe good luck happy to help
yasin0005 said:
It works 100 % ...my pleasure hehe good luck happy to help
Click to expand...
Click to collapse
Is it working on lollipop firmware version 3.24.40.87
Root Manually
harsh.patel19998 said:
Is it working on lollipop firmware version 3.24.40.87
Click to expand...
Click to collapse
The only way I got was manually. And to version .87 works. If your do not, manually do it will work .
yasin0005 said:
It works 100 % ...my pleasure hehe good luck happy to help
Click to expand...
Click to collapse
Worked for me, first time itself. Thanks for your effort. Now that my phone is rooted can you kindly refer me to sources where I can upgrade it to Lollipop. I've read many tutorials where they've shown how to upgrade to Lollipop from KitKat on a non-rooted device, but mine is rooted, so how do I upgrade?
Thanks, awaiting your reply.
tech321 said:
Worked for me, first time itself. Thanks for your effort. Now that my phone is rooted can you kindly refer me to sources where I can upgrade it to Lollipop. I've read many tutorials where they've shown how to upgrade to Lollipop from KitKat on a non-rooted device, but mine is rooted, so how do I upgrade?
Thanks, awaiting your reply.
Click to expand...
Click to collapse
No u must have to unroot mobile before upgrading u r ROM because official ROM required unroot if its rooted mobile u faced bootloop problem......so u first unroot it and then upgrade ...u can root again on new upgraded Rom by using same procedure which was given by me in previous post ....
yasin0005 said:
No u must have to unroot mobile before upgrading u r ROM because official ROM required unroot if its rooted mobile u faced bootloop problem......so u first unroot it and then upgrade ...u can root again on new upgraded Rom by using same procedure which was given by me in previous post ....
Click to expand...
Click to collapse
Thanks for the reply bro..that was quick help.
I tried to root my zenfone 5 as per the instructions but the phone is not rebooting it is stuckinthe screen which says " Asus- insearch of incredible" and the circle goes round and round .
Bibhuti777 said:
I tried to root my zenfone 5 as per the instructions but the phone is not rebooting it is stuckinthe screen which says " Asus- insearch of incredible" and the circle goes round and round .
Click to expand...
Click to collapse
First go to bootloader then recovery in recovery select reset option bootloop will b solved thank you
After installing the device drivers just update it in the device driver and repeat the process

Tab A SM T550, android 6.0.1 root problem

I am trying to root my Samsung Galaxy Tab A SM T550, android 6.0.1 and having a problem. The root seems to work fine but upon re-boot I am stuck at the first Samsung Logo. I can’t do anything from there accept go into downloading mode and flash stock recovery and then the tablet works again but isn’t rooted.
I am using this root method; http://www.howtorootphone.com/2016/09/Root-galaxy-Tab-A-9.7-on-6.0.1.html
How to root Galaxy Tab A 9.7
1. Install the USB driver for your tablet into your computer.
2. Enable USB Debugging on your tablet by going to Settings>>Developer options and tick USB Debugging.If your tablet misses Developer options the go to About and tap on Build number 7 times.
3. Power off your tablet and boot into download mode by pressing and holding Volume down, Home and Power button together.
4. Connect your Galaxy Tab A 9.7 to your computer using a data cable.
5. Unzip Odin3 zip file and open Odin3.exe.
6. Make sure that only "Auto Reboot" and "F.Reset Time" is selected in the options menu of Odin.
7. Unzip CF-Auto-Root file and get the root file for your tablet.
8. Click on AP button and select the root file.
9. Click on Start button to begin the rooting process.
Any ideas about what went wrong? Help!!!
Sorry, tried to delete but didn't see how. I think I'll find my answer here; http://forum.xda-developers.com/gal.../root-samsung-galaxy-tab-9-7-sm-t550-t3126827
ahunter said:
Sorry, tried to delete but didn't see how. I think I'll find my answer here; http://forum.xda-developers.com/gal.../root-samsung-galaxy-tab-9-7-sm-t550-t3126827
Click to expand...
Click to collapse
hey i've got the same problem with the same tablet! Did you solve it?
https://forum.xda-developers.com/galaxy-tab/development/guide-twrp-r-t3390115
I did this and this worked for me the same...
But in the last , the reboot screen is there and phone isn't starting . Please help as fast as you can .
Root with super su, go to supersu.com then download the recovery flashable one. If you can't boot to your tablet restore a backup or flash stock rom, hope this helps!

[5.0.2] Need help with Rooting SGGP G530H

Hy everyone
I wan't to root my phone without pc (because i didn't have).
I try to rooting with Kingroot or Kingo root, but it say failed
This my about phone device running Lollipop 5.0.2.
Can anyone give me a solution ?
Sorry for bad english.
Thanks
OctanovaFX said:
Hy everyone
I wan't to root my phone without pc (because i didn't have).
I try to rooting with Kingroot or Kingo root, but it say failed
This my about phone device running Lollipop 5.0.2.
Can anyone give me a solution ?
Sorry for bad english.
Thanks
Click to expand...
Click to collapse
Welcome to XDA,
To root your phone you can follow the steps below. Remember you need to have a PC.
1. Download a custom recovery. You can download one from here. Make sure to download the Odin one (not anything else)
https://twrp.me/samsung/samsunggalaxygrandprime.html
2. Download and install Samsung USB drive for PC from this link
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
3. Download Odin from this XDA thread
https://forum.xda-developers.com/showthread.php?t=2711451
4. Download and copy the SuperSU (root) file that I attached on this post. Should be attached below.
--Now downloading stuff finished. Let's go to the rooting---
1. Open up Odin and select the custom recovery zip in CP or AP or DL spot. Make sure other than Auto reboot and F.Reset time nothing is enabled. Both auto reboot and f.reset time should be enabled
2. Go-to about device and tap build number few times to enable developer option.
3. Go-to developer option and enable usb debugging.
4. Turn off your phone and goto download mode by holding down (Vol -) and (power/lock) and (home) button at the same time until there is a warning sign.
5. Press vol + to go to download mode. Put on USB cable to your phone from pc
6. On PC you should see a blue sign with a text like 'COM:01'. If you see it just press flash button.
--your custom recovery is flashed--
Now comes rooting
7. Once flashed Power off your phone again and hold down (vol +) + (home) + (power) and keep holding until Samsung logo
8.. you should be booted to recovery. Now flash the SuperSU zip attached at the 2nd post.
9. Reboot and your rooted
SuperSu zip attached below
tasnim_tamim said:
SuperSu zip attached below
Click to expand...
Click to collapse
How to root without pc?
But thanks for solutions :laugh:
OctanovaFX said:
How to root without pc?
But thanks for solutions :laugh:
Click to expand...
Click to collapse
Then your only option is using Kingroot. But that's causing problem for you. Can you give me the screenshot of Kingroot that has the problem for you. In past on 5.0 I also tried rooting with Kingroot and it worked fine for me. It works for everyone else as well.
tasnim_tamim said:
Then your only option is using Kingroot. But that's causing problem for you. Can you give me the screenshot of Kingroot that has the problem for you. In past on 5.0 I also tried rooting with Kingroot and it worked fine for me. It works for everyone else as well.
Click to expand...
Click to collapse
I trying to reboot and root again. But still failed
OctanovaFX said:
I trying to reboot and root again. But still failed
Click to expand...
Click to collapse
Strange. It should work. I used Kingroot before and it was supported. Even the device is still in the official Kingroot supported device. Maybe it's not working because you have the latest XCS firmware installed. I use xcu and it's working for me.
Looks like you have no other option but use PC method.
tasnim_tamim said:
Strange. It should work. I used Kingroot before and it was supported. Even the device is still in the official Kingroot supported device. Maybe it's not working because you have the latest XCS firmware installed. I use xcu and it's working for me.
Looks like you have no other option but use PC method.
Click to expand...
Click to collapse
can you give me a kingroot that you use?
I'll try. But if failed again. I will use a pc
OctanovaFX said:
can you give me a kingroot that you use?
I'll try. But if failed again. I will use a pc
Click to expand...
Click to collapse
I am sorry, I don't have it. I deleted it. But it doesn't matter which Kingroot you use. Because the root files are saved in server. Even if you use a very old version of Kingroot you will get the same root files as the new one has.
I deleted it because Kingroot is a malware (or at least I heard). It takes a lot of your personal details (like IMEI, Phone Number, etc) and adware in both statusbar and lock screen. So I don't like Kingroot that much.
tasnim_tamim said:
I am sorry, I don't have it. I deleted it. But it doesn't matter which Kingroot you use. Because the root files are saved in server. Even if you use a very old version of Kingroot you will get the same root files as the new one has.
I deleted it because Kingroot is a malware (or at least I heard). It takes a lot of your personal details (like IMEI, Phone Number, etc) and adware in both statusbar and lock screen. So I don't like Kingroot that much.
Click to expand...
Click to collapse
Ok.. thank you very much for solution :angel:
tasnim_tamim said:
Welcome to XDA,
To root your phone you can follow the steps below. Remember you need to have a PC.
1. Download a custom recovery. You can download one from here. Make sure to download the Odin one (not anything else)
https://twrp.me/samsung/samsunggalaxygrandprime.html
2. Download and install Samsung USB drive for PC from this link
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
3. Download Odin from this XDA thread
https://forum.xda-developers.com/showthread.php?t=2711451
4. Download and copy the SuperSU (root) file that I attached on this post. Should be attached below.
--Now downloading stuff finished. Let's go to the rooting---
1. Open up Odin and select the custom recovery zip in CP or AP or DL spot. Make sure other than Auto reboot and F.Reset time nothing is enabled. Both auto reboot and f.reset time should be enabled
2. Go-to about device and tap build number few times to enable developer option.
3. Go-to developer option and enable usb debugging.
4. Turn off your phone and goto download mode by holding down (Vol -) and (power/lock) and (home) button at the same time until there is a warning sign.
5. Press vol + to go to download mode. Put on USB cable to your phone from pc
6. On PC you should see a blue sign with a text like 'COM:01'. If you see it just press flash button.
--your custom recovery is flashed--
Now comes rooting
7. Once flashed Power off your phone again and hold down (vol +) + (home) + (power) and keep holding until Samsung logo
8.. you should be booted to recovery. Now flash the SuperSU zip attached at the 2nd post.
9. Reboot and your rooted
Click to expand...
Click to collapse
thx my device has been root finally.
Can i ask u a question? Is this way work on the other android (ex: xiami, sony etc) ?
btw, im newbee here and sory fo my bad english
bambitoswa said:
thx my device has been root finally.
Can i ask u a question? Is this way work on the other android (ex: xiami, sony etc) ?
btw, im newbee here and sory fo my bad english
Click to expand...
Click to collapse
Congrats for rooting your device
To answer your question, nope. This method will not work on any other OEM like Sony, Xiaomi, LG, Nexus etc. This only works on Samsung devices.

Lenovo K8 Note (XT1902-3) - Fix Dead/Hard Bricked Phone,Downgrade to Nougat from Oreo

Revive Dead/Hard Bricked/Dead after Flash/LED doesn't light up the phone - K8 Note (XT1902-3)​
If you tried to downgrade from Oreo to Nougat and your device is hard-bricked. Don't worry, follow the procedure below...
1. If your device is fully hard bricked and doesn't boot up by pressing the power button, and also the white LED light doesn't light up while u connect the charger/power on the USB to the PC. Try pressing all the 3 buttons, Volume Up+Volume Down+Power Button for about 25-30 seconds and connect your phone through USB to SP Flash Tool (install all drivers before as said in step 3) and see whether it detects your phone (If it detects, go to step 3). If this also didn't work, don't get panic - follow step 2 (Dismantling your device - the only way to recover. But be cautious while doing it, use proper tools).
2. Remove your phone back cover carefully and disconnect the battery connector as shown in the video
. Use proper tools and a screwdriver. Connect the charger and see now, the LED light will blink surely (If it doesn't blink now also, then it's a hardware problem, you should go to the service centre only).
3. If the LED light blinks properly, then go to SP Flash Tool (download the latest version here - https://androidmtk.com/smart-phone-flash-tool), and in Options->Option go to Download and check USB Checksum and Storage Checksum. Then choose the option Download Only in the drop-down list. (Dont Forget to install all Drivers before - MTK Drivers and Lenovo USB Driver, links below)
MTK (USB DA COM,Preloader USB VCOM,USB Port,USB VCOM) Drivers : https://spflashtool.com/download/Driver_Auto_Installer_v1.1236.00.zip
Lenovo USB Driver : https://lenovousbdriver.com/download/lenovo-driver-v1-1-33
(CAUTION : Don't select Format all+Download because if you mistakenly chose Format All+Download option it will delete all your IMEI no, Device Serial no, WIFI MAC address, and Bluetooth Address. But don't worry you can retrieve it through this method : https://forum.hovatek.com/thread-12328.html or
. Make sure you know all your IMEI no, and device serial no {You can get that from your device box, there will be a label in it}.
4. In the Scatter-Loading file click Choose and load MT6797_Android_scatter.txt under the extracted Oreo Rom (whichever version you prefer)
COUNTRY: GLOBAL​
Oreo Stock Rom OMB 27.43-20 -> https://drive.google.com/file/d/18iZb3sumLUEBNNAYDfRVa3t8fJZVCXgg/view (MANNING OMB 27.43-20.7z ~ 1.40 GB)
Oreo Updated Rom OMB 27.43-45 -> https://drive.google.com/file/d/10QRAgh9Nap30zFSKVkANNkQkifWYrkwC/view (MANNING OMB-27-43-45.7z ~ 1.50 GB)
COUNTRY: USA​
Oreo Updated Rom OMB 27.43-67 -> https://mirrors.lolinet.com/firmwar..._OMB27.43-67_subsidy-UNLOCKED_CFC_SVC.xml.zip (MANNING_RETAIL_OMB27.43-67_subsidy-UNLOCKED_CFC_SVC.xml.zip ~ 1.79 GB)
Oreo Updated Rom OMB 27.43-70 -> https://mirrors.lolinet.com/firmwar..._OMB27.43-70_subsidy-UNLOCKED_CFC_SVC.xml.zip (MANNING_RETAIL_OMB27.43-70_subsidy-UNLOCKED_CFC_SVC.xml.zip ~ 1.79 GB)
Wait for some time until it loads........
5. Now click on Download Button. Then switch off your phone and keep pressing the Volume UP button while connecting your phone to the PC through USB.
6. Now your phone will be flashed successfully and you will get a message Download OK. Close that and remove your USB and Power On your phone. Your phone will boot in Oreo, and you have unbricked your phone!!! Enjoy!!!
Downgrade to Nougat from Oreo - K8 Note​
1. First Unlock your bootloader through the following steps:
(Before this take a backup of all your files, apps, and data because it will factory reset your mobile)
{Unroot your phone if you're rooted, also Uninstall any modules or Xposed or rooted apps if installed}
i) Go to Settings->About Phone and Tap on Build number for about 7 times, this will enable the Developer Options. Now go to Settings->Developer Options, switch ON it, and enable OEM unlocking & USB debugging.
ii) Next, Go to Fastboot mode manually. Switch off your phone. Press Volume UP+Power Button at the same time. While the phone vibrates release the power key and hold the Volume up button. You will see three options. Select fastboot option using the Volume UP key (for scrolling) and select it using Volume Down Key (for selecting).
iii) Extract minimal_adb_fastboot zip file on your PC -> https://androidfilehost.com/?fid=457095661767103465, and press Shift+Right Click inside the extracted folder and give open the command window here. Then Connect the mobile to your PC using a USB.
iv) Then type : fastboot oem unlock {Note: This will wipe all your phone data & make it as new, so take a backup of all before doing it} (Then press the Volume Up key in your mobile after it prompts)
vi) Type : fastboot reboot (It will boot up your phone normally)
vii) That's it now you have unlocked your bootloader successfully
2. Download Nougat Rom : (whichever version you prefer)
Updated Final Version Nougat ROM NMB26.54-94 ->
https://mega.nz/#!lIYSAaSb!q1S24g11wHxH3j0Zjl9FD8jO7s4jPFwInseORqYg9Xs (MANNING-54_94 .7z ~ 1.61 GB) COUNTRY : GLOBAL
https://mirrors.lolinet.com/firmwar...MB26.54-94_105_release-keys_retail_US_SVC.zip (manning_retail_user_7.1.1_NMB26.54-94_105_release-keys_retail_US_SVC.zip ~ 1.69 GB) COUNTRY : USA
Updated Nougat ROM NMB26.54-74 ->
https://androidfilehost.com/?fid=962021903579496260 (Lenovo_K8_Note_XT1902-3_(NMB26.54-74_75)_by_(FirmwareOS.com).zip ~ 2.09 GB) COUNTRY: GLOBAL
Nougat Stock Rom NMB26.54-35 -> (whichever link you prefer)
http://www.mediafire.com/file/7l8n312jhec1hmy/Lenovo_K8_Note_XT1902-3_MT6797_26092017_7.1.1.zip (Lenovo_K8_Note_XT1902-3_MT6797_26092017_7.1.1.zip ~ 2.10 GB) COUNTRY: GLOBAL
https://mega.nz/#F!EXphwJLb!Us6WQxEOAonVCrmLomxjHw (fastboot_manning_retail_user_7.1.1_NMB26.54-35-2_2_release-keys_retail_US.zip ~ 2.06 GB) COUNTRY: USA
https://mirrors.lolinet.com/firmwar...NMB26.54-35_35_release-keys_retail_US_SVC.zip (manning_retail_user_7.1.1_NMB26.54-35_35_release-keys_retail_US_SVC.zip ~ 2.01 GB) COUNTRY : USA
3. Extract the downloaded zip file and Go to Fastboot mode manually as mentioned before. (Switch off, Press Volume UP+Power button at same time. Release Power button while phone vibrates. Then Choose Fastboot option using Volume Up Key and select it using Volume Down Key)
4. Connect the USB Cable from phone to PC and Double click the flashall.bat file inside the downloaded zip. {Rename flashall.txt in the attachment to flashall.bat, if you didn't find it from the downloaded zip}. This will flash the Nougat Rom fully on your device. Sit Back for some time, and relax.
5. It will boot automatically and go to Nougat Rom. If you got some error on it or force stop apps or bootloop don't worry.
Switch off your phone by long pressing power key
6. Go to Recovery Mode manually (Switch off, Press Volume UP+Power button at same time. Release Power button while phone vibrates. Then Choose Recovery option using Volume Up Key and select it using Volume Down Key. Now you will get a Android dead kinda symbol. Press Volume UP + Volume Down +Power button, you will see Recovery Mode). Choose Wipe Data/Factory Reset and Yes--delete all user data. See this video if you have doubts how to factory reset using recovery mode :
7. Then select Restart System now in Recovery Mode (Volume Up and Volume Down to Select between options and Power Button to OK). Viola...!!! Your system will reboot and your'e on Nougat Rom...!!!
{Note : After downgraded to Nougat, you won't get OTA update to Oreo. But you can get all the OTA updates of Nougat. Main thing: Don't use "fastboot oem lock" in downgraded Nougat Rom it may brick your device. Because while you lock the oem in downgraded version, the system updates will look for Oreo Rom so it wont boot as you already downgraded. If it's bricked try flashing Oreo Stock Rom using spflash tool. So try keep the "device unlocked. Orange Status......" text that comes while you boot up, always in downgraded Nougat Rom}
Follow the procedure correctly so you can retrieve your K8 Note, don't blame me if you totally damaged/bricked your device.
Hit Like and Press Thanks...!!!!
If you have any doubts you can mail me at [email protected]
Bro... thanks a lot. I was able to downgrade my lenovo k8 note to Nougat from Oreo. Oreo update sucked lot of battery, had heating issues and sometimes hung during power off/restart. I decided to downgrade and this post was very helpful.
Flashing succeeded but still phone dead after several failed attempts, flashed nougat back, still no use... again flashed oreo and boom....... phone booted into oreo. thanks for the great help.
ROM links are not working
Stock Nougat Rom links are not working.. can you please check
Feel Awesome that you Downgraded K8 Note from Oreo to Nougat
sudhans said:
Bro... thanks a lot. I was able to downgrade my lenovo k8 note to Nougat from Oreo. Oreo update sucked lot of battery, had heating issues and sometimes hung during power off/restart. I decided to downgrade and this post was very helpful.
Click to expand...
Click to collapse
I am glad that my blog helped u in downgrading...
Felt Awesome that you Downgraded K8 Note from Oreo to Nougat
sudhans said:
Bro... thanks a lot. I was able to downgrade my lenovo k8 note to Nougat from Oreo. Oreo update sucked lot of battery, had heating issues and sometimes hung during power off/restart. I decided to downgrade and this post was very helpful.
Click to expand...
Click to collapse
I am glad that my blog helped u in downgrading...
Updated, check it.... Try Mediafire Link
bhellsun said:
Stock Nougat Rom links are not working.. can you please check
Click to expand...
Click to collapse
Nougat Stock Rom (NMB26.54-35) -> http://www.mediafire.com/file/7l8n312jhec1hmy/Lenovo_K8_Note_XT1902-3_MT6797_26092017_7.1.1.zip
Oreo Stock Rom (OMB 27.43-20) -> https://drive.google.com/file/d/18iZb3sumLUEBNNAYDfRVa3t8fJZVCXgg/view
Try the procedure properly so that you can downgrade...
Manivel2007 said:
Flashing succeeded but still phone dead after several failed attempts, flashed nougat back, still no use... again flashed oreo and boom....... phone booted into oreo. thanks for the great help.
Click to expand...
Click to collapse
If u have installed twrp in oreo get rid of that and go for stock oreo recovery, if u have rooted already on oreo means unroot your mob, uninstall xposed/magisk manager if it's there. Then start the process with unlocked bootloader, go to fastboot mode and run flashall.bat inside the Stock Nougat Rom zip. After the process finished successfully the device will boot automatically. You may get some errors or not, no probs about it, go to recovery mode manually and factory reset your mobile. Restart the mob. This will surely work. Go for it...
Anyways, I feel good that you retrieved your phone back through Oreo Rom. :good:
Thanks, man Much appreciate. I have followed your instruction and I succeeded. XDA always rocks.
100 percent working
working to kmay k8 note thank you so much for helpng each other
After flashing, Have tried to install the Nougat ROM, But getting below error
Flashing Options:
- flash userdata: 0
- erase userdata: 0
- erase cache: 0
Waiting for fastboot enumeration...
Not found any devices connected. Please check and try again.
i need 8.0 43-45 any upload in eat
please gavi a ink on lenovo k8 note latest update
appreciated your work
hey, I recently read your thread on the same topic of lenovo k8 note.
I downgraded my phone from oreo update to naugat directly through flash tool.
it got dead and after multiple flashings it didn't work.
finally your thread help me out to revive my phone, but it is just showing me the logo.
it has stucked on boot loop.
what to do?
help me out.
I feel good that you flashed your K8 Note successfully
Dj ps said:
Thanks, man Much appreciate. I have followed your instruction and I succeeded. XDA always rocks.
Click to expand...
Click to collapse
I Feel Good that you Succeeded following my steps
Don't downgrade from Oreo to Nougat of K8 Note through spflash tool
akki8800 said:
hey, I recently read your thread on the same topic of lenovo k8 note.
I downgraded my phone from oreo update to naugat directly through flash tool.
it got dead and after multiple flashings it didn't work.
finally your thread help me out to revive my phone, but it is just showing me the logo.
it has stucked on boot loop.
what to do?
help me out.
Click to expand...
Click to collapse
Try factory resetting using Recovery mode, if u can go through it. Else flash Oreo Rom through latest version of spflash tool. Only Downgrade using fastboot mode....
Given Oreo Updated ROM for K8 Note links, check it...
kulerman123 said:
please gavi a ink on lenovo k8 note latest update
Click to expand...
Click to collapse
OMB 27.43-45 links updated, check it...
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
See whether your phone is properly connected to PC and the device is showing or not
mymilu2018 said:
After flashing, Have tried to install the Nougat ROM, But getting below error
Flashing Options:
- flash userdata: 0
- erase userdata: 0
- erase cache: 0
Waiting for fastboot enumeration...
Not found any devices connected. Please check and try again.
Click to expand...
Click to collapse
Check up your drivers and the ROM file whether its corrupted....
Thanks for your positive review....
kulerman123 said:
working to kmay k8 note thank you so much for helpng each other
Click to expand...
Click to collapse
Thanks and I am always glad to help peoples.... :highfive:
I tried many things... i tried to use recovery but after showing lenovo logo for about a minute... it either gets off or restart. I m using latest sp flash tool.
Drivers are updated and.
What should i do....
I have given it to service center as well even they cant help it out..
Saying motherboard has issues...
:crying::crying:
Can Lenovo k8 note Android p unofficial ROM.
Hi, xda developers is there any way that Lenovo k8 note can get Android p ROM. If yes please reply?

Categories

Resources