"The Helio X10 will be the first chip, which support all bands wordwide"
I really need band 20 for EU LTE but I need to wait for my Redmi Note 2 prime. So did someone try to unlock more bands?
How do u know it is support all bands?
[I saw at enginering mode, band 20 currently not support
I think he wanted to quote it from some sites.
Many Blogs/Shops have that sentence included, they have to do some advertisement.
But as far as I know some reviews also claimed Band 20 (which is very important in Germany) is not supported.
MediaTek sad "Our new chip will be the first, which support LTE worldwide, over 47 bands".
It support all bands but Xiaomi just buy 3 bands.
We need a tutorial, how to unlock other bands.
Sent from my Redmi Note 2 using Tapatalk
Klanac89 said:
MediaTek sad "Our new chip will be the first, which support LTE worldwide, over 47 bands".
It support all bands but Xiaomi just buy 3 bands.
We need a tutorial, how to unlock other bands.
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
I think we are kind of far off for a tutorial. From what I've gathered, there are very limited phones with this chip in them at this time, which means we have very little developer support.
Hopefully there are some people reading these forums more advanced than I, but from what I've gathered we wish we had some sort of diagnostic tool like the Qualcomm Diagnostic Tools, but it doesn't appear that MediaTek has something like this. (That has been released anyways)
If the chip supports all bands, then one would think that bands could be restricted at the Baseband. The Baseband gets commands from RIL and Vendor RIL Drivers (That should be located in some of the system driver folders. I have one of the RIL files pulled to my PC, but haven't had time to try and check it out. I'm guessing because its been compiled, it probably wont have anything that is readable or makes any sense to me. Would be pretty sweet if it was as simple as hexediting some flags to turn bands on.
Also, I'm sure the baseband is compiled, and protected, so I'm not sure how easy it is to pull from a rom, or from a phone for that matter... and then once its pulled, if anything will be easy to read for clues reguarding Radio Interface, or Modem Bands...
Anyone available to lend me some knowledge on the subject? I would love a little primer or some reading information to help with this quest.
Thanks!
http://www.unlockpwd.com/published-the-source-code-of-the-mediatek-mt6795-helio-x10/
Nice
Sent from my Redmi Note 2 using Tapatalk
If someone can unlock this LTE bands, it would be awesome, because I need band 5/850 too...
Dude, I will pay for that
Sent from my Redmi Note 2 using Tapatalk
Klanac89 said:
http://www.unlockpwd.com/published-the-source-code-of-the-mediatek-mt6795-helio-x10/
Nice
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
AMAZING!
GitHub often blows my mind, as I forget to check this resource normally... Damn :/
Klanac89 said:
Dude, I will pay for that
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
Ask at MIUI forum bro... hope dev MIUI can read it and try to unlock them haha
I'm sure here are a lot of people which will pay for that.
Sent from my Redmi Note 2 using Tapatalk
Klanac89 said:
http://www.unlockpwd.com/published-the-source-code-of-the-mediatek-mt6795-helio-x10/
Nice
Click to expand...
Click to collapse
andy775 said:
AMAZING!
GitHub often blows my mind, as I forget to check this resource normally... Damn :/
Click to expand...
Click to collapse
The link is no longer working. However, it looks like the source is still posted.
https://github.com/search?q=Mt6795
still waiting....
^ waiting will get you (us) nowhere. Looking through those files, it seems that the file where the bands are defined is this. It's non-trivial to "enable" them, though, seems like you have to know exactly which hex codes do what to set the radio up correctly.
That's a find there...
ferlie said:
still waiting....
Click to expand...
Click to collapse
Like I told you, we need to collect money
Crim Soukyuu said:
^ waiting will get you (us) nowhere. Looking through those files, it seems that the file where the bands are defined is this. It's non-trivial to "enable" them, though, seems like you have to know exactly which hex codes do what to set the radio up correctly.
Click to expand...
Click to collapse
Hmmm... Maybe Elephone can help us? This company got phones with MediaTek SoC and more LTE bands?
Sent from my Redmi Note 2 using Tapatalk
My Note2 is on the way. One of the first thing I will try will be using other phone's rils with similar soc (like the mx5 that support B20). The files are in /system/etc/firmware. If we are lucky, this will be enough. Otherwise it will be a long hacking road.
XMister:
Let me know if there is anything I can do to help you out. I have a Note 2 Prime now, and am pretty comfortable flashing / restoring. Would love to assist you any way I can!
Thanks for your input, We appreciate you!!
With band 20 I will be more than happy
Sent from my Redmi Note 2 using Tapatalk
andy775 said:
XMister:
Let me know if there is anything I can do to help you out. I have a Note 2 Prime now, and am pretty comfortable flashing / restoring. Would love to assist you any way I can!
Thanks for your input, We appreciate you!!
Click to expand...
Click to collapse
First of all, make a backup of your IMEI and NVRAM.
Second, I'm attaching the firmware files of MX5. I'm not sure about which one should be replaced on Note2, but my guess would be one of the modem...img files.
So, make a backup of your firmware files, and try to replace them (you need root, and r/w mounted system, then adb from pc, or es file explorer from the phone itself can do the job), and reboot.
See if it makes any difference in available bands. Oh and don't forget to make the new files have the exact permissions as the old one had.
Related
Am I the only one using the newly released variant with international LTE? GT-N7005.
Seems there is no ROMs compatible with this new variant.
Hehe maybe check out Hydracore kernel? That one should work.
Better to ask in his Q&A thread though
Sent from my GT-N7000 using Xparent SkyBlue Tapatalk 2
Livebyte said:
Am I the only one using the newly released variant with international LTE? GT-N7005.
Seems there is no ROMs compatible with this new variant.
Click to expand...
Click to collapse
I think you might be in the wrong forum here. It appears that your phone has dual-core 1.5Ghz processor (but Samsung doesn't say which one), and that's something your phone shares with SGN I717. If I'm right here there's not a single Rom or kernel here that you can flash without running into pretty serious problems.
Anyone got the root?
I also got the N7005 from Hong Kong. Anyone knows how to get the phone rooted or install CWM?
chasmodo said:
I think you might be in the wrong forum here. It appears that your phone has dual-core 1.5Ghz processor (but Samsung doesn't say which one), and that's something your phone shares with SGN I717. If I'm right here there's not a single Rom or kernel here that you can flash without running into pretty serious problems.
Click to expand...
Click to collapse
I think one of these people needs to:
Install Android System Info
Tap the System tab
Expand the CPU row
Tell us what the "Hardware:" field says
For example, N7000 units report "Hardware: SMDK4210"
Well... surprise.. the Hardware: GT-N7005...
scpion said:
Well... surprise.. the Hardware: GT-N7005...
Click to expand...
Click to collapse
That's odd, on every other device that field reports a general board type and not specific model number - for example SMDK4210 for I9100/I777/N7000 (and probably the Tab 7 Plus and 7.7), and SMDK4X12 for I9300/N80xx/I9305/Note2 variants.
There...
Kind Sirs out there, would this help in any way? Not too much info can be found of this variant.. Would this be the international version for the Note LTE
scpion said:
There...
Click to expand...
Click to collapse
CPU Implementer of 0x51 = Qualcomm. See "Known ARM Manufacturer Codes" at http://code.google.com/p/android-analyzer/wiki/CPUPlugin
Your device, despite having a model number far closer to GT-N7000, is more similar to the SGH-I717.
Really appreciate your help and explanation. I find it strange that I cant find much info on this variant on the internet..
scpion said:
Really appreciate your help and explanation. I find it strange that I cant find much info on this variant on the internet..
Click to expand...
Click to collapse
This device was only release in SG and HK so very limited users and it seems no much development on ROM, etc. Has anyone successfully root this not using the i717 methood? See link below
http://rootgalaxynote.com/galaxy-no...y-note-sgh-i717-icsgingerbreadeasiest-method/
Any want to try to get CDMA up for Ubuntu Touch? Ubuntu Touch would get a lot more attention I know I would defiantly work on it if CDMA was supported!
jonahly said:
Any want to try to get CDMA up for Ubuntu Touch? Ubuntu Touch would get a lot more attention I know I would defiantly work on it if CDMA was supported!
Click to expand...
Click to collapse
I would absolutely LOVE to see this. I would also give working on it a shot, not that I have a very good idea of what I am doing but I would damned well give it a.shot!
Sent from my SCH-I605 using XDA Premium HD app
Can someone at least respond if they plan to?
jonahly said:
Can someone at least respond if they plan to?
Click to expand...
Click to collapse
Dont think we'll see it anytime soon. Most of the devs working on it are GSM users so they dont give a care about ud CDMA uers. Isnt at&t gsm anyway?
Anything in the USA is CDMA, and outside of the US is GSM.
Adding CDMA isn't something one of our developers could do. It would require canonical to partner with an in US cellular company i.e. Sprint, Att, Verizon, etc...
So just wait until they have a hardware vendor preparing to sell the real handset.
CDMA will come into the picture with time.
Sent from my Nexus 7 using xda app-developers app
blmvxer said:
Anything in the USA is CDMA, and outside of the US is GSM.
Adding CDMA isn't something one of our developers could do. It would require canonical to partner with an in US cellular company i.e. Sprint, Att, Verizon, etc...
So just wait until they have a hardware vendor preparing to sell the real handset.
CDMA will come into the picture with time.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Not true, T-mobile and AT&T are both GSM.
And ofono supports cdma now, its a matter of getting it to recognize the device.
blmvxer said:
Anything in the USA is CDMA, and outside of the US is GSM.
Adding CDMA isn't something one of our developers could do. It would require canonical to partner with an in US cellular company i.e. Sprint, Att, Verizon, etc...
So just wait until they have a hardware vendor preparing to sell the real handset.
CDMA will come into the picture with time.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
There's a lot more standards then those to. WCDMA, for example. Used in Europe.
Sent from my GT-I9300 using xda app-developers app
The problem is you'd have to entirely rewrite the RIL. That's a pain in the balls
Sent from my SCH-I605 using Tapatalk 4 Beta
idkwhothatis123 said:
The problem is you'd have to entirely rewrite the RIL. That's a pain in the balls
Sent from my SCH-I605 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Agreed but it can't be as bad as MIUI, having to rewrite the entire RIL and then doing a ****load of smali edit is a huge pain but its done all the time.
If I knew how, or had someone willing to help me, I would take it on.
Sent from my SCH-I605 using XDA Premium HD app
If anyone is willing to let me ping questions off of the give me a little help editing the RIL I will be more than glad to do the majority of the work, I just have no clue what to do to get started.
Sent from my SCH-I605 using XDA Premium HD app
I would LOVE to run this, but I'm cdma as well. I'm willing to help do the leg work as well but also need to be coached.
Sent from my SPH-D710 using xda premium
emottau said:
I would LOVE to run this, but I'm cdma as well. I'm willing to help do the leg work as well but also need to be coached.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I don't think ofono supports CDMA completely yet, us CDMA users will have to be patient. It is being worked on thoughhttps://ofono.org/blogs/bertrandaygon/2011/ofono-049.
The OS is coming along well though.
I would use Ubuntu touch CDMA or not.
Sent from my LG-LS970 using xda app-developers app
Would love to use this even if the radio want working just to try it out
Sent from my One using xda app-developers app
I am looking to upgrade my phone on Verizon. But want to make sure that the one I get will be easily able to be unlocked and run Ubuntu Touch.
So in short, though Ubuntu Touch may not be ported to it yet. What is the best bet for a MODERN phone, that is well made enough to last 2 to 3 years (there are still some Nokia N900s out there going strong, so don't tell me its not possible) to upgrade to that is the most hackable? I've considered the Sam G Note 2, because of the really large screen. But don't know how "Hackable" it is in comparison to other devices.
Not the Nexus, very capable phone but won't be able to fully use desktop mode with full power. I would prefer 4G, since Verizon has stated that they will drop all other radio support in the next 2 to 3 years and only use 4G for voice and data.
Thank you and God Bless you guys and the work you do here!!
clem11388 said:
Not the Nexus, very capable phone but won't be able to fully use desktop mode with full power. I would prefer 4G, since Verizon has stated that they will drop all other radio support in the next 2 to 3 years and only use 4G for voice and data.
Click to expand...
Click to collapse
There is no device except the Galaxy Nexus and the Nexus 4 which has Ubuntu Touch.
To98 said:
There is no device except the Galaxy Nexus and the Nexus 4 which has Ubuntu Touch.
Click to expand...
Click to collapse
I'm sorry I didn't state it fully. I am looking for the most HACKABLE device that way it will be the most likely device to LATER receive a port for Ubuntu Touch. Not that it currently has Ubuntu Touch.
I backed the Ubuntu Edge crowdfunding campaign and was willing to wait a almost a full year before receiving what I paid for. I would be more than willing to wait for a port for the same software but different device. And would donate to the person or persons that did the most work.
Pretty much has to be Quad Core of some kind, as much Ram as possible. And ability to use an SD card so storage space won't be an issue. And again, it HAS to be high quality enough to last atleast 2 to 3 year. My Moto Droid 2 has gone through 3 warranty replacements in the past 2 years. I refuse to deal with that level of incompetent hardware development. If an N900 can last almost 5 years and still go strong using various different Linux Operating systems with more capabilities than the original. Then Modern Android Manufacturers have no excuse.
Sorry for the rant, if you didn't catch that, I'm a little bit peeved at hardware companies lately.
clem11388 said:
I'm sorry I didn't state it fully. I am looking for the most HACKABLE device that way it will be the most likely device to LATER receive a port for Ubuntu Touch. Not that it currently has Ubuntu Touch.
Click to expand...
Click to collapse
Sorry, I misunderstood you.
I would recommend you to wait for an official device to be released because the current easy hackable devices are only Nexus or Samsung (but without drivers to port custom roms).
To98 said:
Sorry, I misunderstood you.
I would recommend you to wait for an official device to be released because the current easy hackable devices are only Nexus or Samsung (but without drivers to port custom roms).
Click to expand...
Click to collapse
I've been trying to do that, because I love most of what Ubuntu Touch has shown so far. But now the left half of the touch screen on my Droid 2 Global has now stopped working. The screen still works and displays things fine. But it won't recognize any touches. It has a slide out keyboard, which helps alot cause I can use the arrow keys to do most things and still type. And I use Button Savior since this has capacitive buttons along the bottom, the left 2 buttons (Menu and Home) also no longer work. Oh and the 3.5 mm Headphone jack hasn't worked in months. And I've only had this warranty replacement for about 1 year. I would like to wait until official devices are released. But my current device is metaphorically falling to pieces.
Now you see why I am so upset with hardware manufacturers?
clem11388 said:
Now you see why I am so upset with hardware manufacturers?
Click to expand...
Click to collapse
Oh, that's really a problem. If you don't need a high-end device asap I'd recommend you a really cheap Android device (you can keep it as a second fall-back phone). I have a Galaxy Gio as my second phone and I'd recommend that for you. It costs 40€ on ebay (I don't what it costs in your country) and has really good build quality and an active community for custom roms (you can install real stable and fast Android 4.2 on it). But it has no CDMA support.
I can't recommend you any current phone because nobody knows how they'll be working with Ubuntu Touch. Maybe the Samsung Galaxy S4...
Hi
I think it would be great if the Note 4 could inherit the Screen-Off Memo feature of the Note 5...
(not sure but maybe this equals a port of the whole Air Command)
Thanks A LOT in advance
beng
I totally agree, is this a real possibility for the note 4?
Surly at some point Note 5 Rom will be ported to Note 4. or maybe Xposed module one day. We need some skilled Dev to take up this project.
That'll be super good & useful.... not to mention up the value of note 4 !
I would donate to that Dev
mydroidfren said:
That'll be super good & useful.... not to mention up the value of note 4 !
Click to expand...
Click to collapse
I would easily donate 50 Euros to dev who will port it across, maybe more depending on quality of the port.
This would not be an easy port, to be honest.
From the video's I've seen the offscreen write feature bypasses the lock without giving the user access to the system. My best guess is that it's integrated into the lock sceens on the N5. We'd have to download them and try.
Parastie said:
This would not be an easy port, to be honest.
From the video's I've seen the offscreen write feature bypasses the lock without giving the user access to the system. My best guess is that it's integrated into the lock sceens on the N5. We'd have to download them and try.
Click to expand...
Click to collapse
I have been checking the codes.
Pls note that there is a separate AirCommandService.apk file in the system/app folder in Note5. This Service is the one that possibly scans the intents when the S Pen is removed and triggers the "BlackMemo" I can find the codes for it as shown in the attachment below.
There would be lot of work to be done as there are codes for the airbutton in the framework.jar files and a few other files and the settings part of spen also needs to be ported as there are codes to check if it is enabled in settings and comparision with Note 4 files show that they are quite different. May be best is to wait for the 5.1.1 release for Note 4 and then try porting this.
shaji_ka_71 said:
I have been checking the codes.
Pls note that there is a separate AirCommandService.apk file in the system/app folder in Note5. This Service is the one that possibly scans the intents when the S Pen is removed and triggers the "BlackMemo" I can find the codes for it as shown in the attachment below.
There would be lot of work to be done as there are codes for the airbutton in the framework.jar files and a few other files and the settings part of spen also needs to be ported as there are codes to check if it is enabled in settings and comparision with Note 4 files show that they are quite different. May be best is to wait for the 5.1.1 release for Note 4 and then try porting this.
Click to expand...
Click to collapse
I'm not familiar with the 32bit vs 64bit versions of Android, but can you tell if there are calls that would require the 64bit version?
Sent from my XT1032 using Tapatalk
Parastie said:
I'm not familiar with the 32bit vs 64bit versions of Android, but can you tell if there are calls that would require the 64bit version?
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
I guess the 64 Bit/32 Bit would be in the Libs/Kernel. If any apks explicitly reference these 64 bit libs then, yes there might be an issue porting them. But I am not too sure if any of these core spen applications reference the 64 bit libs or not.
shaji_ka_71 said:
I guess the 64 Bit/32 Bit would be in the Libs/Kernel. If any apks explicitly reference these 64 bit libs then, yes there might be an issue porting them. But I am not too sure if any of these core spen applications reference the 64 bit libs or not.
Click to expand...
Click to collapse
From your screenshot, I think we can assume that blackmemo is an app, but its an app that is integrated into the core spen feature. I agree with you that nearly the entire spen framework would have to be ported. Depending on the lib requirements, this may or may not be possible.
Sent from my XT1032 using Tapatalk
Parastie said:
From your screenshot, I think we can assume that blackmemo is an app, but its an app that is integrated into the core spen feature. I agree with you that nearly the entire spen framework would have to be ported. Depending on the lib requirements, this may or may not be possible.
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
The below are the intents that the AirCommandService.apk will register and here you can see that the intent for Black_Memo is getting registered to be received. ("com.sec.android.intent.action.BLACK_MEMO")
private void registerBroadcastReceiver()
{
IntentFilter localIntentFilter = new IntentFilter();
localIntentFilter.addAction("android.intent.action.SCREEN_ON");
localIntentFilter.addAction("android.intent.action.SCREEN_OFF");
localIntentFilter.addAction("android.intent.action.CLOSE_SYSTEM_DIALOGS");
localIntentFilter.addAction("android.intent.action.USER_PRESENT");
localIntentFilter.addAction("android.intent.action.DREAMING_STARTED");
localIntentFilter.addAction("com.sec.android.automotive.drivelink.carmodechanged");
localIntentFilter.addAction("com.sec.android.intent.action.BLACK_MEMO");
localIntentFilter.setPriority(999);
this.mContext.registerReceiver(this.mBroadCastReceiver, localIntentFilter);
}
So if we even get this service file functional on note 4 , we can perhaps trigger and test the intent using terminal command (am start -a "intent details")
Let us hope some one cracks this soon
shaji_ka_71 said:
The below are the intents that the AirCommandService.apk will register and here you can see that the intent for Black_Memo is getting registered to be received. ("com.sec.android.intent.action.BLACK_MEMO")
private void registerBroadcastReceiver()
{
IntentFilter localIntentFilter = new IntentFilter();
localIntentFilter.addAction("android.intent.action.SCREEN_ON");
localIntentFilter.addAction("android.intent.action.SCREEN_OFF");
localIntentFilter.addAction("android.intent.action.CLOSE_SYSTEM_DIALOGS");
localIntentFilter.addAction("android.intent.action.USER_PRESENT");
localIntentFilter.addAction("android.intent.action.DREAMING_STARTED");
localIntentFilter.addAction("com.sec.android.automotive.drivelink.carmodechanged");
localIntentFilter.addAction("com.sec.android.intent.action.BLACK_MEMO");
localIntentFilter.setPriority(999);
this.mContext.registerReceiver(this.mBroadCastReceiver, localIntentFilter);
}
So if we even get this service file functional on note 4 , we can perhaps trigger and test the intent using terminal command (am start -a "intent details")
Let us hope some one cracks this soon
Click to expand...
Click to collapse
My worry are the lib requirements and if those could be ported. Can't try anything until I get a Note 4. I'll dig through the files later once I have one.
Sent from my XT1032 using Tapatalk
BenG7 said:
Hi
I think it would be great if the Note 4 could inherit the Screen-Off Memo feature of the Note 5...
(not sure but maybe this equals a port of the whole Air Command)
Thanks A LOT in advance
beng
Click to expand...
Click to collapse
i think it's possible unless there r some lib64 files required, i even wanted to port it to note2/tab s. need time to study the files though
oh btw, anyone know what the big green triangular like notification in edge (or note 5 also, i dono) called? i found "edge notification" only but wonder if it is referring to that triangular notification or just "a notification on the edge side"
i am talking about this one. people edge notification?
Note 3 has it w/o root
It isn't as fully featured as the Note5 as far as lock bybass but here is the thread ... http://forum.xda-developers.com/galaxy-note-3/themes-apps/app-screen-off-memo-t3196790
Sixperience N5 port by Geiti94 is on the way it the dev managed to port screen off memo... You can check rom progress in xda thread or on Sixperience Facebook page...
Xperiacle over at the Note 3 thread has made an app that supports screen off memo. Per the comments it seems to be working quite well so I'm sure that a version for the Note 4 should be quite possible in the near future. (http://forum.xda-developers.com/galaxy-note-3/themes-apps/app-screen-off-memo-t3196790)
glm0025 said:
Xperiacle over at the Note 3 thread has made an app that supports screen off memo. Per the comments it seems to be working quite well so I'm sure that a version for the Note 4 should be quite possible in the near future. (http://forum.xda-developers.com/galaxy-note-3/themes-apps/app-screen-off-memo-t3196790)
Click to expand...
Click to collapse
At the moment the app doesn't work with the stock 5.1.1 rom. Someone people have gotten it to work on 5.0.1 builds by editing their build.prop. It also doesn't work if you have a security lock.
Sent from my SM-N910C using Tapatalk
The important thing is that it is a start so it shows that a port is possible but it will require tweaking.
glm0025 said:
The important thing is that it is a start so it shows that a port is possible but it will require tweaking.
Click to expand...
Click to collapse
Follow the link. Working perfectly on my N910G.
http://www.androidauthority.com/galaxy-note-5-screen-off-memo-on-note-3-4-edge-644178/
The exynos variant of the note 4 has 64-bit capabilities, whereas the snapdragon variant doesn't. So it won' be difficult to port screen off memo and scroll capture to the exynos variant. Scroll capture feature contains 64-bit libs, but not sure about the screenoff memo feature.
There is a trick to use jio 4g in 3g MTK and Qualcomm devices, but i am having a hard time to find a solution for zenfone 5 which is powered by an Intel chipset....Please help
Get a device changer app( an app that let other apps think you're using some other phone) and do the necessary steps like installing all jio apps and getting the code
Still the answer would be NO because Jio is 4G LTE only network, it doesn't support HSPA or HSUPA or GSM.
cy56 said:
Still the answer would be NO because Jio is 4G LTE only network, it doesn't support HSPA or HSUPA or GSM.
Click to expand...
Click to collapse
But it's possible for 3g phones running on MTK and Qualcomm chipsets to get jio signal by making a few changes in engineering mode..
azamsid said:
But it's possible for 3g phones running on MTK and Qualcomm chipsets to get jio signal by making a few changes in engineering mode..
Click to expand...
Click to collapse
Strange... Jio states that their network is 4G only. If anyhow this is possible, it is only possible through enabling 4G via software only when it is restricted. Just like Nokia did on their Lumia phones, their phones had 4G in hardware but they didn't enabled it but a few months later Nokia issued an update which enabled that.
cy56 said:
Strange... Jio states that their network is 4G only. If anyhow this is possible, it is only possible through enabling 4G via software only when it is restricted. Just like Nokia did on their Lumia phones, their phones had 4G in hardware but they didn't enabled it but a few months later Nokia issued an update which enabled that.
Click to expand...
Click to collapse
I am not allowed to post links .... So just Google how to use jio sim in a 3g phone...you will understand
@azamsid i have a mtk based phone rooted and when I open engineering mood app this app not required root there is option to select LTE network when I select it back to default auto any solution I think it possible when I find an app that required root and go to network hidden menu
So is there any app that required root and go to network hidden menu @cy56
waheem said:
@azamsid i have a mtk based phone rooted and when I open engineering mood app this app not required root there is option to select LTE network when I select it back to default auto any solution I think it possible when I find an app that required root and go to network hidden menu
So is there any app that required root and go to network hidden menu @cy56
Click to expand...
Click to collapse
Yes it is: *#*#4636#*#* Dial this and you can access the hidden menu without root and you can even set LTE network mode but unfortunately it doesn't work. There may be solution for MTK devices but this is Intel device so don't expect that because Asus doesn't provide a **** in open source.
cy56 said:
Yes it is: *#*#4636#*#* Dial this and you can access the hidden menu without root and you can even set LTE network mode but unfortunately it doesn't work. There may be solution for MTK devices but this is Intel device so don't expect that because Asus doesn't provide a **** in open source.
Click to expand...
Click to collapse
Thats right...and zenfone 5 using Intel® XMM™ 6360
Look here : http://www.intel.com/content/www/us...e-communications/mobile-xmm-6360-1-brief.html
paktepu said:
Thats right...and zenfone 5 using Intel® XMM™ 6360
Look here : http://www.intel.com/content/www/us...e-communications/mobile-xmm-6360-1-brief.html
Click to expand...
Click to collapse
Another query bro! My phone is losing Baseband time to time. Every time I fix it, on 3rd or 4th reboot it's dead again. Then after some more reboots it comes back automatically. Should I get the Baseband Chip replaced?
cy56 said:
Another query bro! My phone is losing Baseband time to time. Every time I fix it, on 3rd or 4th reboot it's dead again. Then after some more reboots it comes back automatically. Should I get the Baseband Chip replaced?
Click to expand...
Click to collapse
I dont know bro, need to test it first. Did you ever take it to ASC?
If we know that chip make problem on your device then yes it should replaced.
Sent from my ASUS_T00F using XDA-Developers mobile app
cy56 said:
Strange... Jio states that their network is 4G only. If anyhow this is possible, it is only possible through enabling 4G via software only when it is restricted. Just like Nokia did on their Lumia phones, their phones had 4G in hardware but they didn't enabled it but a few months later Nokia issued an update which enabled that.
Click to expand...
Click to collapse
After a little research:
"You need to find chipset of android device. Your android smartphone must have run mediatek or qualcomm snapdragon chipset."
Basically you need a phone with LTE on hardware, even if it doesnt have the 4G LTE antenna as it still has 4G support if you "mod" hardware or find how to enable it (remember nexus 4?) tho thats not the case on the zenfone first gen series, unless yours come with snapdragon.
So please understand IT IS IMPOSSIBLE END OF STORY STOP DEBATING ABOUT IT BECAUSE THERES NO HOW TO DO IT.
good options it to learn from mistakes and use only devices with snapdragon for now on, i kept my zf5 but upgraded to oneplus
guidoido004 said:
After a little research:
"You need to find chipset of android device. Your android smartphone must have run mediatek or qualcomm snapdragon chipset."
Basically you need a phone with LTE on hardware, even if it doesnt have the 4G LTE antenna as it still has 4G support if you "mod" hardware or find how to enable it (remember nexus 4?) tho thats not the case on the zenfone first gen series, unless yours come with snapdragon.
So please understand IT IS IMPOSSIBLE END OF STORY STOP DEBATING ABOUT IT BECAUSE THERES NO HOW TO DO IT.
good options it to learn from mistakes and use only devices with snapdragon for now on, i kept my zf5 but upgraded to oneplus
Click to expand...
Click to collapse
Yes, that's what I'm saying from start.
---------- Post added at 01:27 PM ---------- Previous post was at 01:24 PM ----------
paktepu said:
I dont know bro, need to test it first. Did you ever take it to ASC?
If we know that chip make problem on your device then yes it should replaced.
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
Never. The real problem is that when the SIM gets inserted, it loses Baseband (the way I described), else not. I'm using the phone without SIM since last week, no re-boot and no baseband lost issue, so probably it's something related to hardware.
I research on Google and find something like editing build.prob to enable selecting LTE on engineering mood network settings but I don't try it is there anyone try to edit build.prob
azamsid said:
But it's possible for 3g phones running on MTK and Qualcomm chipsets to get jio signal by making a few changes in engineering mode..
Click to expand...
Click to collapse
can i get this on my grand 2 device running on custom rom... resurrection remix... plzz help me...
Hello xda members there are many kind of way i have seen to use jio in 3g phone and no one worked in my phone i m using lava iris x1 with cortex a7 chipset so i would be glad if u guys let me know onether way ..
Aliec said:
Hello xda members there are many kind of way i have seen to use jio in 3g phone and no one worked in my phone i m using lava iris x1 with cortex a7 chipset so i would be glad if u guys let me know onether way ..
Click to expand...
Click to collapse
If your hardware doesnot support LTE bands then there is no way to use it . it doesn't matter what changes you do in software .
Nothing for now.
So yeah, you're doomed.
Hey Axon users and devs!
I recently received a ZTE Axon 7s(A2018) from my uncle that works for ZTE. It's a different device than what I thought, I like it! I've been looking near and far for development for this device. It's turns out to be none since the security features of this device is crazy. What I'm trying to get at is...
Would anybody be willing to develop a rom and custom recovery for this device if I supplied the files and charitability?
Have a crack at it and if you need any assistance I am there. I am crazy busy at the moment and don't have time to do so.
Thank you
Kountry
hi,
there is no development for this phone.
it was released in june 2017 only in china, there are no international/us variants available. the phone doesn't have all related LTE bands.
no one need it, no one buy it.
skdubg said:
hi,
there is no development for this phone.
it was released in june 2017 only in china, there are no international/us variants available. the phone doesn't have all related LTE bands.
no one need it, no one buy it.
Click to expand...
Click to collapse
It works perfectly on T-Mobile and At&T LTE. I'm using it right now on band 12 on T-Mobile. I also get band 2 and 4 in some areas too. So yes it has potential and it's faster than my ZTE Axon 7 Enhanced Edition. I get 176,462 on Antutu benchmark.
kountry83 said:
It works perfectly on T-Mobile and At&T LTE. I'm using it right now on band 12 on T-Mobile. I also get band 2 and 4 in some areas too. So yes it has potential and it's faster than my ZTE Axon 7 Enhanced Edition. I get 176,462 on Antutu benchmark.
Click to expand...
Click to collapse
nice
what is the advantage of the antutu points? nothing
however, there is no development and there will be no development
Basically, it's a Chinese only model and very rare outside China. There's no demand for it and no non Chinese ROM. I don't think there would even be sources to make it from.
Pity, because it's a better device.
Did you found any method to install twrp and magisk?
hijibiji said:
Did you found any method to install twrp and magisk?
Click to expand...
Click to collapse
Yup its all on the forums here
stevecaboose said:
Yup its all on the forums here
Click to expand...
Click to collapse
you sure you're talking about the axon 7s?
Choose an username... said:
you sure you're talking about the axon 7s?
Click to expand...
Click to collapse
My mistake. I didnt see that part.