Related
After install the v20d baseband on my phone, the phone lost the IMEI number and when I try to enter the EDM appears this screen.
Any way to restore the EDM? I'm with CM 10 installed can access the emulator and recovery. I've tried installing other ROMS but without success. can someone help me?
rdazevedo said:
After install the v20d baseband on my phone, the phone lost the IMEI number and when I try to enter the EDM appears this screen.
Any way to restore the EDM? I'm with CM 10 installed can access the emulator and recovery. I've tried installing other ROMS but without success. can someone help me?
Click to expand...
Click to collapse
yeah, i had this problem too, you need to go to downlaod mode and install again the JB or ICS version, or what you need if you want to get your CWM back
Sabyn said:
yeah, i had this problem too, you need to go to downlaod mode and install again the JB or ICS version, or what you need if you want to get your CWM back
Click to expand...
Click to collapse
The problem is just that. When I go into download mode appears this screen! I just can not get into download mode.
rdazevedo said:
The problem is just that. When I go into download mode appears this screen! I just can not get into download mode.
Click to expand...
Click to collapse
are you sure is Downlaod mode and not emergency mode?
you tried to press both of + and - volume and after plug in the usb cable which is already connected to your pc?
After I updated my LG to v20B I also have a problem to get in Download mode to update it with v20D. I don't know what could be a problem. I noticed my phone was no longer rooted after I updated it with v 20B, but I am not sure if that might be the problem. Must I find the way to root my phone again to be able to get in Download mode the same way as before?
I managed to solve my problem getting into recovery and installing the baseband v10, with that he started to get into download mode. This happened every time I tried to install the v20d baseband. Just get it to work with the baseband v20a.
Hey, I'm having the exact same problem, the same screenshot you posted.
Can you explain how you managed to install baseband v10 in recovery mode? How can I even put baseband v10 in my phone, when I cannot even start it? To put it on my sd card and then install it from recovery?
I hope anyone will reply, because I'm desperate!
edit: ok, i managed to instal v10 baseband, but still cannot enter into download mode....
i press both volume buttons and power button and all that happens now is that my led buttons (back & options) blink once and that's all
Take out battery PRESS AND HOLD VOL- button now plug USB cable into it.
It will start in download mode without battery
From what i can see, you have entered fastboot mode. If you are lucky, you can flash some recovery through fastboot and try to restore the IMEI that way.
misschocolate said:
Hey, I'm having the exact same problem, the same screenshot you posted.
Can you explain how you managed to install baseband v10 in recovery mode? How can I even put baseband v10 in my phone, when I cannot even start it? To put it on my sd card and then install it from recovery?
I hope anyone will reply, because I'm desperate!
edit: ok, i managed to instal v10 baseband, but still cannot enter into download mode....
i press both volume buttons and power button and all that happens now is that my led buttons (back & options) blink once and that's all
Click to expand...
Click to collapse
use emergency mod, the combo is the one posted by struart
E615 in continous bootloop
I have this E615 in bootloop, not sure how it got to this point, but I suspect failed update or so.
Keep rebooting on the LG Logo and will not enter emergency mode, tried with all key combo with and without batter and USB cable
dannyogolo said:
I have this E615 in bootloop, not sure how it got to this point, but I suspect failed update or so.
Keep rebooting on the LG Logo and will not enter emergency mode, tried with all key combo with and without batter and USB cable
Click to expand...
Click to collapse
extract .kdz (look on xda)
download lgflashtool (look on xda)
flash using the tool
if you need help please quote me and i will help you
dannyogolo said:
I have this E615 in bootloop, not sure how it got to this point, but I suspect failed update or so.
Keep rebooting on the LG Logo and will not enter emergency mode, tried with all key combo with and without batter and USB cable
Click to expand...
Click to collapse
If you get into charging battery ( remove battery, remove usb cable, plug usb cable, insert battery ), you can use kdz to burn the firmware in diag mode, at least it works on LG E430, good luck.
DONE
Some1 told me to use P990 LG usb cable without battery, and it worked.
Phone went into Emergency mode and I flashed it with Vygis
Thanks
Hi guys, (LG G2, Rooted, had twrp but now its vanished?!)
I managed to get my LG G2 into a bootloop. I was replacing bootanimations and rebooting and testing them out. I finally tried this 1080p boot animation that looked sweet. Once the device rebooted it would show half the boot animation and then reboot. I had twrp installed but now every time i try to access it it just ignores the hotkeys as if it doesn't exist anymore. I can only get into download mode if a usb is plugged in.
All i need to do is flash TWRP again so i can flash the stock bootanimation back. I do not want to do a fresh install as I have many important files (i know i should have backed them up). I have tried to access my phone via adb using windows commandline tool whilst in download mode. however, adb doesn't find my device (I was going to attempt to push the stock animation back).
Please help me guys i need my phone to be working by monday as i have work! thanks in advance
SPBoss said:
Hi guys, (LG G2, Rooted, had twrp but now its vanished?!)
I managed to get my LG G2 into a bootloop. I was replacing bootanimations and rebooting and testing them out. I finally tried this 1080p boot animation that looked sweet. Once the device rebooted it would show half the boot animation and then reboot. I had twrp installed but now every time i try to access it it just ignores the hotkeys as if it doesn't exist anymore. I can only get into download mode if a usb is plugged in.
All i need to do is flash TWRP again so i can flash the stock bootanimation back. I do not want to do a fresh install as I have many important files (i know i should have backed them up). I have tried to access my phone via adb using windows commandline tool whilst in download mode. however, adb doesn't find my device (I was going to attempt to push the stock animation back).
Please help me guys i need my phone to be working by monday as i have work! thanks in advance
Click to expand...
Click to collapse
1. If you connect your phone to PC, what happens?
2. I also had trouble accessing TWRP, so I did the "Factory reset" button combo (Don't remember what it was) and when I slided to confirm, twrp booted. From there I think you have adb and can fix everything.
To get to TWRP, hold the power button until the phone turns completely off, then turn on the phone while holding the power and volume down buttons, then when the LG logo pops up, let go and re-press those buttons. When prompted for a factory reset, press the power button. Works every time for me.
Alone i used lg flashtoolnow,its ok. I didnt click factory reset i assumed it would delete everything? With lgflash i have restored system and everything is how i left it.
Sent from my LG-D802 using Tapatalk
alone-together said:
To get to TWRP, hold the power button until the phone turns completely off, then turn on the phone while holding the power and volume down buttons, then when the LG logo pops up, let go and re-press those buttons. When prompted for a factory reset, press the power button. Works every time for me.
Click to expand...
Click to collapse
worked like a charm, many thanks!
alone-together said:
To get to TWRP, hold the power button until the phone turns completely off, then turn on the phone while holding the power and volume down buttons, then when the LG logo pops up, let go and re-press those buttons. When prompted for a factory reset, press the power button. Works every time for me.
Click to expand...
Click to collapse
i cannot enter the download mode and the recov mode. I pressed it as your instruction said, but nothing happened.. what should i do ?
All the application force close, so i cannot enter the OS either..
xzork said:
i cannot enter the download mode and the recov mode. I pressed it as your instruction said, but nothing happened.. what should i do ?
All the application force close, so i cannot enter the OS either..
Click to expand...
Click to collapse
First off, you'll need to make sure your phone isn't plugged in or it won't work - I'm afraid if you can't enter recovery you'll have to go back to stock. http://forum.xda-developers.com/showthread.php?t=2432476
Sucess
alone-together said:
To get to TWRP, hold the power button until the phone turns completely off, then turn on the phone while holding the power and volume down buttons, then when the LG logo pops up, let go and re-press those buttons. When prompted for a factory reset, press the power button. Works every time for me.
Click to expand...
Click to collapse
Thank you, saved me day.
dear sir good evening sir plz plz help me my LG G2 is not working. still only black screen and show lg logo sir plz help me:crying:
PUNNU NAGI said:
dear sir good evening sir plz plz help me my LG G2 is not working. still only black screen and show lg logo sir plz help me:crying:
Click to expand...
Click to collapse
Try to flash the Kitkat baseband or if you are fully stock then i suggest you to flash the KDZ to go back to full stock(http://forum.xda-developers.com/showthread.php?t=2432476)
If you still have important data like pictures or what then do normal flash. Use the Android version you also had as stock and use that as KDZ. If you are not stock then can you reach TWRP?
and what did you do before that causes the black screen?
Stuck with the LG logo. Nothing happens in download mode
Hi All, not sure if this has been answered prior. This is what happen, I wanted to flash SOKP so I backup my phone and saved to PC using Titanium. I have TWRP installed.
Boot Into Recovery Mode and Wipe Data,System,Cache,Dalvik
I restart so I can flash the SOKP Rom and all I see on my phone is the LG logo. I try to restart using the Power and Up button, but it just sits in the download mode saying "Firmware Update" with no movement or action.
The phone is unable to turn off now. This is my first go at Flashing a Rom. Any help or suggestion would be greatly appreciated. Thanks in advance
my lg g2 is stuck on lg logo, and when i can enter download mode, and flash kdz my computer just dont detect my phone.
please help me :crying:
jungsora said:
my lg g2 is stuck on lg logo, and when i can enter download mode, and flash kdz my computer just dont detect my phone.
please help me :crying:
Click to expand...
Click to collapse
same here .... plz any solution?
justme!! said:
same here .... plz any solution?
Click to expand...
Click to collapse
Someone help, same issue.
sam_p15 said:
Someone help, same issue.
Click to expand...
Click to collapse
Someone help
Hey, I have the nearly same problem with my G2 running CM12 also installed recovery
But I can't reboot in recovery neither with the factory reset buttons, nor manually with SDK Manager, because the device is not found.
So I can just reboot and it shows the CM boot image, or get in the download mode.:crying:
Any suggestions?:fingers-crossed:
sam_p15 said:
Someone help, same issue.
Click to expand...
Click to collapse
I was in same stuation before 2 months send to warranty.
If rooted you can use adb shell with su and push partitions with "dd" while staring (stuck in lg logo)
Help!!
I have boot loop, only download mode accessible, device not found on adb. When I try LG FlashTool, instead of using the KDZ file I provide, it starts downloading some other firmware at times, and at times it says your software is up to date. What do I do? :|
How do i fix TWRP Bootloop on my HTC explorer a310e... ?
Dear,
How do i fix TWRP Bootloop on my HTC explorer a310e... ?
I hav custom cm11 Kitkat ROM installed on it...
but after I installed the rom, and again tried to reboot
into TWRP recovery, it is just stuck on the blue color
TEAMWIN screen... Please help how to fix it...!
USE method with .tot is working for me
Hey guys!
I used Lg Flash tool 2014 to flash a stock kdz for my phone!
After it get to a 100% the phone keeps showing the lg boot animation.
When i power off the phone i cant switch it on with the power buttons, it only switches on when i connect it via usb. It says it has 82% charge when i connect it by usb. I can get into download mode!
I do not want to lose my data on my internal storage because it has alot of photos!
Any one have a solution?
Thanks!
deathslayerx1 said:
Hey guys!
I used Lg Flash tool 2014 to flash a stock kdz for my phone!
After it get to a 100% the phone keeps showing the lg boot animation.
When i power off the phone i cant switch it on with the power buttons, it only switches on when i connect it via usb. It says it has 82% charge when i connect it by usb. I can get into download mode!
I do not want to lose my data on my internal storage because it has alot of photos!
Any one have a solution?
Thanks!
Click to expand...
Click to collapse
Are you able to boot into stock recovery? Also, are you sure you flashed the correct kdz file? If download mode works, just re-flash. You should have taken the backup of internal storege BEFORE flashing.
[The Punisher] said:
Are you able to boot into stock recovery? Also, are you sure you flashed the correct kdz file? If download mode works, just re-flash. You should have taken the backup of internal storege BEFORE flashing.
Click to expand...
Click to collapse
Im not able to boot into recovery at all and I used a uae d802 kdz tried reflashing 3 times!
deathslayerx1 said:
Im not able to boot into recovery at all and I used a uae d802 kdz tried reflashing 3 times!
Click to expand...
Click to collapse
Are you doing this?
How to Enter Recovery Mode on LG G2 (quick easy steps)
Press the Volume Down and the Power Button at the same time, about 2-3 seconds until the LG Logo shows.
When the LG Logo shows, release the buttons and then press and hold them again.
Keep pressing the buttons until the Recovery Mode Menu displays.
[The Punisher] said:
Are you doing this?
How to Enter Recovery Mode on LG G2 (quick easy steps)
Press the Volume Down and the Power Button at the same time, about 2-3 seconds until the LG Logo shows.
When the LG Logo shows, release the buttons and then press and hold them again.
Keep pressing the buttons until the Recovery Mode Menu displays.
Click to expand...
Click to collapse
Yes I am! I've put my phone in recovery mode many times!
[The Punisher] said:
Are you doing this?
How to Enter Recovery Mode on LG G2 (quick easy steps)
Press the Volume Down and the Power Button at the same time, about 2-3 seconds until the LG Logo shows.
When the LG Logo shows, release the buttons and then press and hold them again.
Keep pressing the buttons until the Recovery Mode Menu displays.
Click to expand...
Click to collapse
Power buttons dont switch on the phone! I get into download mode my pressing the volume up button and connecting the usb cable.
deathslayerx1 said:
Im not able to boot into recovery at all and I used a uae d802 kdz tried reflashing 3 times!
Click to expand...
Click to collapse
Is your phone a UAE model? Try flashing another/older version of the stock kdz (meant for your model)
[The Punisher] said:
Is your phone a UAE model? Try flashing another/older version of the stock kdz (meant for your model)
Click to expand...
Click to collapse
I bought mine in Qatar. Trying to flash the UK open tdz now. Connection to server failed error pops up but I dont click anything and in the end it ends up in a bootloop
deathslayerx1 said:
I bought mine in Qatar. Trying to flash the UK open tdz now. Connection to server failed error pops up but I dont click anything and in the end it ends up in a bootloop
Click to expand...
Click to collapse
Check the box of the phone if you still have it, that should help you get the exact model of your phone. then try flashing the appropriate kdz.
Does the LG Mobile Support Tool recognize the phone in download mode?
I have a UAE model (d802, 32 GB) and was getting security boot errors. I put the phone into download mode and connect the phone to the LG Mobile Support Tool and performed a upgrade recovery. This brought my phone back to stock LP.
audit13 said:
Does the LG Mobile Support Tool recognize the phone in download mode?
I have a UAE model (d802, 32 GB) and was getting security boot errors. I put the phone into download mode and connect the phone to the LG Mobile Support Tool and performed a upgrade recovery. This brought my phone back to stock LP.
Click to expand...
Click to collapse
I will try downloading Lg support tool tommorrow and give you an update! Does it wipe your internal memory?
I don't know. I assume it does. I didn't have anything on my phone before restoring.
audit13 said:
I don't know. I assume it does. I didn't have anything on my phone before restoring.
Click to expand...
Click to collapse
Hey there! I downloaded the lg support tool and it said there's an upgrade avaliable.
When I click start upgrade it gives me a message saying: More than 195MB storage is required to upgrade your phone. Any suggestions?
deathslayerx1 said:
Hey there! I downloaded the lg support tool and it said there's an upgrade avaliable.
When I click start upgrade it gives me a message saying: More than 195MB storage is required to upgrade your phone. Any suggestions?
Click to expand...
Click to collapse
I just clicked on upgrade recovery and now its downloading the firmware! Will let you know the result!
Let us know what happens. Thanks.
I've been using Cyanogenmod 13.1 (rooted) and I decided to flash a ROM with Nougat. I flashed lineage-14.1-20170320-nightly-d802-signed and open_gapps-arm-7.1-mini-20170325 and everything worked fine except I didn't have SuperSU. I tried flashing SuperSU-v2.79-201612051815 and when I tried to boot into system I got this screen (with the LG logo below) http://i.imgur.com/O7vOtab.png I tried many methods like this https://forum.xda-developers.com/showthread.php?t=2582142 and this https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404 to no avail. In Linux when I used the ls /dev/sd* command in the terminal the phone wouldn't show up and later in Windows I got the PC to recognize the phone as Marshall USB Composite Device 9006 http://i.imgur.com/a5WHV9P.png and in Disk Management the phone partition shows up un-initialised http://i.imgur.com/XaVKIu7.png . Help I don't know what to do now. Tell me if I should provide more information.
I had the exact same problem. Then i found a solution. Just dont flash the normal Supersu, you need to flash the Supersu BUMPED file. Just go in recovery, press 10 sec the power button to be sure the phone is off, then hold volume down and power button until the logo appears, then release and press again (fast) then choose yes, yes. Just flash the Bumped and if recovery asks to do root choose NO.
The Bumped which worked for me
http://www108.zippyshare.com/v/ZjxTLdkp/file.html
I hope i could help
RelaxBuddy said:
I had the exact same problem. Then i found a solution. Just dont flash the normal Supersu, you need to flash the Supersu BUMPED file. Just go in recovery, press 10 sec the power button to be sure the phone is off, then hold volume down and power button until the logo appears, then release and press again (fast) then choose yes, yes. Just flash the Bumped and if recovery asks to do root choose NO.
The Bumped which worked for me
I hope i could help
Click to expand...
Click to collapse
Well I had no luck getting into recovery before but that was before I took apart my phone because I couldn't turn it off (it keeped bootlooping) but I will try, thanks
Bluellama said:
Well I had no luck getting into recovery before but that was before I took apart my phone because I couldn't turn it off (it keeped bootlooping) but I will try, thanks
Click to expand...
Click to collapse
Yeah Bad same Problem, turned off and it went on, then again bootloop. But if you press the power button long enough then its completely off. In cyanogen mod i had Problem that i couldnt get into recovery with power button+volume down.
So you should flash kdz, get oneclickroot for LG g2, then autorec lollipop to get recovery. Then flash Rom + gapps + The bumped file.
If you dont know how to flash kdz, you can ask here. I will help
Good luck
RelaxBuddy said:
Yeah Bad same Problem, turned off and it went on, then again bootloop. But if you press the power button long enough then its completely off. In cyanogen mod i had Problem that i couldnt get into recovery with power button+volume down.
So you should flash kdz, get oneclickroot for LG g2, then autorec lollipop to get recovery. Then flash Rom + gapps + The bumped file.
If you dont know how to flash kdz, you can ask here. I will help
Good luck
Click to expand...
Click to collapse
Previously I couldn't go into download mode but I will try now since I managed to turn off the smartphone completely. Before it would just stay on with a black screen.
Bluellama said:
Previously I couldn't go into download mode but I will try now since I managed to turn off the smartphone completely. Before it would just stay on with a black screen.
Click to expand...
Click to collapse
Yeah Ok. When I wanted to turn It off, I just pressed the power button until the screen went black and the logo came again but after 2-3 sec the screen went black again, then it was off (just hold power button for 10sec)
Try that when your phone keeps restarting
RelaxBuddy said:
Yeah Ok. When I wanted to turn It off, I just pressed the power button until the screen went black and the logo came again but after 2-3 sec the screen went black again, then it was off (just hold power button for 10sec)
Try that when your phone keeps restarting
Click to expand...
Click to collapse
KDZ flashing gets stuck at 60% (Verifying phone connection) http://i.imgur.com/AAHKqcd.png
Should I just let it sit through its emotional problems?
Bluellama said:
KDZ flashing gets stuck at 60% (Verifying phone connection) http://i.imgur.com/AAHKqcd.png
Should I just let it sit through its emotional problems?
Click to expand...
Click to collapse
Get the lg mobile support tool, install it. Then open and connect your phone via download mode, it will find the phone and download the kdz for it. That should work.
If it doesn't install automatically, click on additional options then click on set upgrade error back, or something like that.
Before all that install the driver from
http://www.lg.com/de/support/service-mobil-telefon/lg-G2
Then you can start with lg mobile support tool
RelaxBuddy said:
Get the lg mobile support tool, install it. Then open and connect your phone via download mode, it will find the phone and download the kdz for it. That should work.
If it doesn't install automatically, click on additional options then click on set upgrade error back, or something like that.
Before all that install the driver from
http://www.lg.com/de/support/service-mobil-telefon/lg-G2
Then you can start with lg mobile support tool
Click to expand...
Click to collapse
Ok I managed to flash a stock rom and the problem was... usb 3.0. I connected the phone to usb 2 and it worked flawlessly. If anybody has a problem like I did you can message me
Hello there!
I've tried to go from android 9.0 beta build to the released LG one for my country (H87030a_00_PLS_PL_OP_0905). The installation went ok. But the phone was stuck on logo. So I did factory reset by holding vol- + power button. Now the phone is stuck on boot logo, and it doesn't turn off.
After that I've tried going with this instruction: (https://forum.xda-developers.com/lg-g6/how-to/lg-g6-unbrick-method-t3935924). But on clicking download button step in QFIL, there goes "Download Fail Switch to EDL FailFailed to Switch to Emergency Download Mode"
Sooooo I would try to install again the original kdz file by LGUP again but the phone is stuck on LG G6 ThinQ logo :|
Would anyone help me out with this?
No help for me? Sad Sarid is Sad
Sarid said:
No help for me? Sad Sarid is Sad
Click to expand...
Click to collapse
Wait untill battery goes away and then go to download mode by inserting usb cable and pressing the volume down button
Sarid said:
No help for me? Sad Sarid is Sad
Click to expand...
Click to collapse
on logo press and hold volume down and power button until phone shuts down and then go to download mode by inserting usb cable and pressing the volume down button and use lg up to flash the kdz or downgrade from pie https://forum.xda-developers.com/showpost.php?p=80464669&postcount=46
neobdium said:
on logo press and hold volume down and power button until phone shuts down and then go to download mode by inserting usb cable and pressing the volume down button and use lg up to flash the kdz or downgrade from pie https://forum.xda-developers.com/showpost.php?p=80464669&postcount=46
Click to expand...
Click to collapse
Worked, I am in download mode, but when I try to go through link instruction to install working KDZ, after clicking "start" the error window pops up:
"Error: 0x81000302, Please use latest DLL
LAF Protocol version is not match DLL=116608592
Device = 124133408"
EDIT: Tried with not "partition dl" option but with the upgreade one. Everything went fine but! Now I am back at the solution of the problem. Back at LG G6 ThinQ powered by android logo :/
EDIT2: Menaged to make it work. It turns out that despite that I bought my phone in local store in Poland, it doesn't mean I get phone specificlly sold for this region market. I got it for POC region. It makes difference :| Thanks anyway guys
Have you already solved your problem? I have exactly the same as yours, stands on the LG logo and you can not turn off the phone or enter the download mode