Database Users

My leo screen with whoter

I bought invisible shield for my telephonephone. I used sprey 2 times, after I installed perfect. When I was turn on phone there was whoter in screen. It works very nice, there is no problem but there is whoter in screen. What can I do?

Super, nobody knows something

Hi,
Only leaving it 2 hours before bumping isn't going to encourage people to help!
Is it water underneath the screen, or water between your protector and your screen?
Is the water black or colourless?

rp-x1 said:
Hi,
Only leaving it 2 hours before bumping isn't going to encourage people to help!
Is it water underneath the screen, or water between your protector and your screen?
Is the water black or colourless?
Click to expand...
Click to collapse
Thank you. There is someone, who hears me I think underneath the screen, on the film. because fingertip screen works perfect. Everything works perfect but there is black water colour.
What do you think? What can it be?

If it is black, then it could be the screen had broken, or take a look here:
http://forum.xda-developers.com/showthread.php?t=635447

It is black but mine isn't look like it. When backlight is white, you can understand. In there you can understand device is closed

Had this on my HD when I did it. The spray has seeped trough the screen suround and caught under the glass. I popped the battery out and put it on the radiator overnight (wrapped in a T towel) and it went away. Not sure if that trick will work on the HD2 as the screen is glass on the HD2, and plastic on the HD. Worth a try though.
However, wont use the protectors any more

please post picture. maybe it will help people who got same problem like u before notice it and help u out. last time,my hd spoil because of invisible shield. i spray too much.then water entering my device,and i cant on.wait after 3month also no used.then i buy hd2

URL=http://img576.imageshack.us/i/dsc04935o.jpg/]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL]

All screen was black yesterday, but today is so better. But there is still

success in changing X10 housing :D

hey guys, i succesfully changed my housing, after the scary task of removing the touch module, and then glueing it onto the next one, and letting it sit for 24 hours, its working flawlessly, here is some pics excuse the bad quality, was taken with my iPod touch
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ignore my spelling, im not to good at it

That looks cool... I have the same setup with the black in the front... did you manage to get any dust in there? I got some in mine... and its annoying as hell sometimes

saketh321 said:
That looks cool... I have the same setup with the black in the front... did you manage to get any dust in there? I got some in mine... and its annoying as hell sometimes
Click to expand...
Click to collapse
nope, i used a clear box with gloves so i didnt get any crap inside it

would superglue be alright to use under the corner of the touch module?
bottom right corner is lifting and nothing i put on it will hold it, ofcourse super glue would, just dont want it to stuff my module
would it be alright?

Whoa. Nice. It's a Panda Phone~ Lol.
Glad you survived the surgery operation >.<

just used superglue to stick the corner of the touch module down.
its stuck, it aint going absolutly no where, man this **** is strong, stuck my finger to my cloth, had to use salt water to get it off

How did you remove digitizer from housing with heat or something else?

petric1 said:
How did you remove digitizer from housing with heat or something else?
Click to expand...
Click to collapse
Per schematics I looked at a while ago, and pictures I've seen, I think that the digitizer and the glass are bonded together. He probably just replaced the glass and digitizer at the same time.
Sent from my X10i using XDA App

That is not cheap solution digitizer cost money!Why replace it if it works?

This just has to be bullcrap!?
........ How?

Dust between screen and sides

Any ideas on how to protect the space between the screen and front edge of this awesome phone?
The gel case from sprint doesn't cover this gap, and there doesn't seem to be many cases out yet to fit the NS4g.
Is this even something to be concerned with?
Sent from my Nexus S 4G using XDA App

ive never had an issues with sides usually can just blow and what ever if anything gets in between usually comes out.
And the screen is fused to the touch glass with adhesive no dust is getting between screen so no worries
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

The dust gets in the exact same place you referenced with me too, and I always get panicky, but I find that if I try to remove it myself, it just ends up worse somehow. They just seem to dissapear after some time in my pocket though. I'll check a few hours later, and bam, the dust isn't there anymore.

MILH0U5E said:
Any ideas on how to protect the space between the screen and front edge of this awesome phone?
The gel case from sprint doesn't cover this gap, and there doesn't seem to be many cases out yet to fit the NS4g.
Is this even something to be concerned with?
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
I use this stuff to get dust out http://www.cyberclean.tv/

suomaf said:
I use this stuff to get dust out http://www.cyberclean.tv/
Click to expand...
Click to collapse
mine has dust too! going to try the gel thing.

I had the same problem just use the edge on piece of
Paper and don't worry dust can't get in the screen like themytouch 4g
My friend got that has dust all up in the screen crazy

suomaf said:
I use this stuff to get dust out http://www.cyberclean.tv/
Click to expand...
Click to collapse
This product looks great to get the dust particles from my pocket out of my devices. Im gonna hit up a couple stores and pick this up, if its not off the wall expensive.

Can you notice screen lift with case?

I recently picked up two new N7's and unfortunately they both have minor screen lift. The cases we ordered are similar to the one pictured below... Can anyone tell me if its even visible/noticeable in a case like that? I mean, i cant imagine it being noticeable with the bezel being covered by the case.
Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

myke66 said:
I recently picked up two new N7's and unfortunately they both have minor screen lift. The cases we ordered are similar to the one pictured below... Can anyone tell me if its even visible/noticeable in a case like that? I mean, i cant imagine it being noticeable with the bezel being covered by the case.
Thanks
Click to expand...
Click to collapse
I have the exact case (except its blue) and the screen lift is not noticeable. In fact, i had ordered the slim ebay case and i switched back to the supcase because it seemed that the screen lift was worse in the ebay case. I feel that the way the supcase holds the N7 in does help

MightyBK said:
I have the exact case (except its blue) and the screen lift is not noticeable. In fact, i had ordered the slim ebay case and i switched back to the supcase because it seemed that the screen lift was worse in the ebay case. I feel that the way the supcase holds the N7 in does help
Click to expand...
Click to collapse
Great news! Thanks for the quick reply.

No. Anything that covers the bezel will hide it. The Slim cases typically don't cover the whole bezel except the corners. Most TPU cases will though.

Problem solved for the screen lift issues

angellsl said:
Problem solved for the screen lift issues
Click to expand...
Click to collapse
I sense some sarcasm, but may as well be for me. I plan on using mine in the case full time so out of sight out of mind
And hey, a case was a valid fix for the iphone4! :victory:

Need Help: Replacement Camera Lens for Galaxy S5

Hi, I recently shattered the original lens on my S5 and bought a replacement on eBay, but it turned out to just be a cheap piece of plastic, not glass, so it doesn't allow the camera to focus. Does anyone have any experience with replacing theirs with something of comparable quality to the original? Does it focus as well? If so, can you provide a link to the item so I can buy it?
Thanks for your help!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

zippychimp said:
Hi, I recently shattered the original lens on my S5 and bought a replacement on eBay, but it turned out to just be a cheap piece of plastic, not glass, so it doesn't allow the camera to focus. Does anyone have any experience with replacing theirs with something of comparable quality to the original? Does it focus as well? If so, can you provide a link to the item so I can buy it?
Thanks for your help!
Click to expand...
Click to collapse
Problems with focusing may be caused with phisical damage after shattering glass or during replecament procedure there was mistake made and damage occured.
Are you 100% sure there is no broken glass left? Even small particle may disturb camera focusing or small fingerprint on lens.

Thanks for your reply. I'm fairly certain there was no damage to the lens and that I was careful in not damaging it and removing all the broken pieces before replacement. Since the camera otherwise works, I'm guessing there was some optical quality in the original glass that doesn't exist with cheap plastic.

zippychimp said:
Thanks for your reply. I'm fairly certain there was no damage to the lens and that I was careful in not damaging it and removing all the broken pieces before replacement. Since the camera otherwise works, I'm guessing there was some optical quality in the original glass that doesn't exist with cheap plastic.
Click to expand...
Click to collapse
Definitely, original part's quality is different than oem-compliant parts. Even the price can tell the difference. I found this supplier, they have the original S5 camera lens, http://www.etradesupply.com/catalogsearch/result/?warehouse=0&q=galaxy+s5+camera+lens hope it helps

Thanks for your response. Turns out there was a tiny piece of glass tapped inside that was causing the focus issues. I took the new one off, cleaned everything with a q tip, put another piece on, and it's good as new. False alarm, I guess.