Hi
I have rooted my milestone 2, after reboot it hangs at the boot logo, I privately to wipe recovery. Now it's just black screen
please help me .. don't know what happend.
Can you explain what did you do to root the phone?
Edit: maybe this link can help you, here you can find the sbf MILS2_U6_2.2.16 for milestone 2.
Read it before you do anything. Be aware that some informations from Droid 2 are not applicable to Milestone 2.
Sent from my MotoA953 using Tapatalk
ss
thnx for your rebly ..
i have rooted by app z4root after that when i reastarted the phone it hangs on boot , i removed the battery now i got only black screen but when i put it in the charge i get battery with ( ? ) symbol check screenshot
screenshot:
w w w . d r o i d s t o r e . s e / s c r e e n / s c r e e n . j p g
but i can get in in recovery .
when i come to recovery i get this error :
E:Can't open /cache/recovery/command
E:Can't open /cache/recovery/caller
i have traid to wipe factory reset it dosn't work
please help me someone.
I rooted my milestone with Z4root v1.3.0 and is working fine.
1 - Do you have a clockworkmod recovery installed and a backup?
2 - If not, follow the link i posted on y previous message and flash your phone with the correct SBF.
no i don't have ..
the problem is i use mac .. will that mode work with mac ?
Hello Xda users.
A n00b incoming -
I am working on a project - where I need the Motorola Razr maxx to use Android 2.3.X, because of some software issues, when I upgraded the phone to 4.0.4.
So I tried to downgrade ( I know alot of ppl - are saying it cant be done ) but I tried anyway - my team and I dont have the time til wait for a software upgrade because of the deadline for the project.
First I tried google and did use:
http://forum.xda-developers.com/showthread.php?t=1586570&highlight=search+this+forum
to root the phone - didnt work.
Tryed to flash it with RSD = fail.
I did get it Rooted.
Then I tried too use
http://droidrazrroot.com/droid-razr...ted-droid-razr-back-to-android-2-3-66-12-173/
to flash it - but but it failed.
Now I got a screen with,
Invalid Flash Mode (S) (Boot Failed)
0A.6C
To return to normal mode - first press power key to power down
Device is Locked. Status Code: 0
Battery OK
OK to program
Transfer Mode:
USB Connected.
Invalid CG OTV (CG: system); Invalid SP Data
Invalid CG Version(CG: system)
Invalid CG OTV (CG: system)
After I had google this, I understand I need to flash the phone with the rigth ROM,
Iam from Denmark and phone is bougth here.
I have tried all european ROMS from :
http://forum.xda-developers.com/showthread.php?t=1362956
and mounted the XML with RSD lite - but it failing.
Where do I get a ROM I can used with RSD ?
Iam sorry if I have posted this in thw wrong section.
// Fiskeren
Not wrong section but wrong device. There is a lot of good information on www.droidrzr.com
Sent from my DROID RAZR using Tapatalk 2
Hi mate i have also bricked motorola pro+ problem is i have original software This phone not turn on after when battery is discharge
I try use rsd lite and new software and in rsd show me
EMEI/ESN: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Boot Version: N / A
DRM Version: N / A
when i try flash show me after couple seconds unable to get fastboot mode or something like this
and chance to repair this phone ??
Hey guys... Well i was one of the flashaholics who went ahead and tried to flash the 4.4.2 UK sbf and ended up bricking my phone which was completely bricked (NOT even FASTBOOT!) and after loads of research and help from people i was able to get my phone working again till fastboot again... P.S- I Have a Droid Maxx DE and used the Moto X files so this should work the same on a Moto X..
You know you are bricked when your phone doesn't get to the fastboot and when you connect it to the PC end up with a device with the name "QHSUSB_DLOAD" without a driver...
CAUTION
If you are here your phone is already screwed up big time! If it gets worse following this then DON'T blame ME!!
Prerequisites-
Moto X Drivers Installed
Adb and fastboot files set up
Riffbox JTAG Drivers (link below)
Sign-Driver Tool (link below)
Moto X blankflash tools(link below)
Downloads
Riffbox USB>Serial Drivers
Driver Signature Enforcement Overrider 1.3b
MOTO X blankflash files
Lets start now!
Because i tried to make the process understandable by all i tried explaing it in excruciating detail and hence will split it into two parts!!
PART-A
Installing the driver
First of all you cannot install the driver cuz it is not signed.. Now we gotta use a bypass tool "dseo13b"..
Extract the "Riffbox_Drivers" somewhere.. say the desktop..
Now run the dseo13b.exe and follow the on screen instructions till you reach a point where you don't know what to choose!
Now choose "Sign a System File" and when prompted for a .sys file navigate to the place where you extracted the drivers and then select "qcusbser.sys" then go back n Enable Test Mode as well and restart your PC.
Plug your phone first.
Right click on "my computer"
Choose "properties" and "device manager" (may vary on different windows OS)
Right click on the device and click "properties".
Choose the device with the name "QHSUSB_DLOAD" and click "update driver"
Select manually install the driver, and search the direction when you extracted the Riffbox driver.
Just follow this video for reference
Now under Ports in Device Manager you will find a port called Qualcomm HS-USB QDLoader 9008 (COM(The com port number which will vary but its important to know))
You are just half way there!
PART-B
Flashing the BLANK BOOTLOADER
Now extract the file "blankflash.zip" in C:\
Open up a Command Prompt and Navigate to the extracted location "cd C:\blankflash\" or anywhere where u extracted it.
Now run "qflash.exe -com(PORT NUMBER) -ramload MPRG8960.hex -mbn 33 MSM8960_bootloader_singleimage.bin -v -o" now where it says PORT NUMBER you have to replace it with the PORT number of Qualcomm HS-USB QDLoader 9008 PORT as you can see from the code below mine was COM10 and then the Magic Happens and you will see something like this-
Code:
C:\Android>qflash.exe -com10 -ramload MPRG8960.hex -mbn 33 MSM8960_bootloader_si
ngleimage.bin -v -o
Motorola qflash Utility version 1.3
COMPORT :COM10
RAMLOADER :MPRG8960.hex
type is 0x21
7 mbn file name MSM8960_bootloader_singleimage.bin type 33
verbose mode on
Motorola qflash dll version 1.6
RAMLOADER VERSION: PBL_DloadVER2.0
------------------------------------------------------
DEVICE INFORMATION:
------------------------------------------------------
Version : 0x8
Min Version : 0x1
Max Write Size: 0x600
Model : 0x90
Device Size : 0
Description : Intel 28F400BX-TL or Intel 28F400BV-TL
------------------------------------------------------
Using passed in packet size, changing from 0x600 -> 0x600
EXTENDED_LINEAR_ADDRESS_REC @ 0x2a000000
Write 65536 bytes @ 0x2a000000
100EXTENDED_LINEAR_ADDRESS_REC @ 0x2a010000
Write 11840 bytes @ 0x2a010000
100START_LINEAR_ADDRESS_REC @ 0x2a000000
EOF_REC
Sleeping for 3s
-----------------------------------------------------
RAM DOWNLOADER INFORMATION
-----------------------------------------------------
cmd : 0x2
description : QCOM fast download protocol targ
version_number : 0x7
compatible_version: 0x2
max_block_size : 0x400
flash_base_address: 0x0
flash_id_len : 0x4
flash id : eMMC
window_size : 0x1e
number_of_sectors : 0x80
-----------------------------------------------------
sdl_send_security_mode: secutiry mode 0x0
Flashing MSM8960_bootloader_singleimage.bin 1969664 bytes into device
Keeping the first packet (1024 bytes) as hostage
Will release it if all is flashed well
100
Hostage released!
done
C:\Android>
And then if everything went well your phone should come to the FASTBOOT!!
DONATIONS are much appreciated guys... If you wish to donate to me just send me a Google play gift coupon as it is not possible to purchase apps with the debit cards where i live... Thank you!
I have reached this step now and am yet to flash the right files cuz of low battery now phone is charging in fastboot while i type...
EDIT:- Once it was charged... used RSD lite n flashed the 4.4 Dev edition sbf this time and VOLA its Alive!!!!! :fingers-crossed:
Okay after you get to the fastboot and get the hab check error then try the following
samwathegreat said:
Ok, do you have the fastboot binary installed?
If so, please do this:
From the bootloader screen: type the following commands:
fastboot flash bootloader motoboot.img
fastboot flash partition gpt.bin
fastboot reboot-bootloader
NOW try RSD Lite again.
Here's the explaination: What we are doing is JUST flashing the bootloader and the partition table (gpt.bin). Then we are immediately rebooting the system back to the bootloader so the device can LOAD the bootloader and the new partition table, BEFORE we proceed with flashing the rest of the partitions.
I've helped several (but not all!!!) people recovery by doing this. It may not work for you, but it is worth a try. Good Luck.
Click to expand...
Click to collapse
CREDITS
1) Boss442 @ the Moto G forums who posted his tool for the Moto G you can go ahead and thank him http://forum.xda-developers.com/showthread.php?t=2623587
2) Brent Rodriguez & Cell Zealot over at Google plus https://plus.google.com/+BrentRodriguez/posts/7aWsNfYawug
Good stuff, thanks for detailing the process for us.
Great, this should save a lot folks azzzzzz
Sent on my Moto X
Gundabolu SC Thanks, with your tutorial and help with Matheus Castro the community Moto X Brazil, could revive my Cellphone
I can't seem to get past step 9. When i plug in my phone to the pc nothing shows up on device manager. QHSUSB_DLOAD doesnt show up anywhere?
crookx said:
I can't seem to get past step 9. When i plug in my phone to the pc nothing shows up on device manager. QHSUSB_DLOAD doesnt show up anywhere?
Click to expand...
Click to collapse
Wait this happened to me too... Try another PC once or connect it with a different Data cable or try holding the power button for 10sec n leaving it and then again press for a few second... I did this entirely on a Windows 7 64 bit PC.. And even I couldn't get the device to show up at first... Or just connect it to your charger for sometime... But AFAIK it shouldn't even charge at this stage... But hey... Worth a try!
Specker_ said:
Gundabolu SC Thanks, with your tutorial and help with Matheus Castro the community Moto X Brazil, could revive my Cellphone
Click to expand...
Click to collapse
No problem man... Glad you could follow n get ur phone back!!
Gundabolu SC said:
Wait this happened to me too... Try another PC once or connect it with a different Data cable or try holding the power button for 10sec n leaving it and then again press for a few second... I did this entirely on a Windows 7 64 bit PC.. And even I couldn't get the device to show up at first... Or just connect it to your charger for sometime... But AFAIK it shouldn't even charge at this stage... But hey... Worth a try!
Click to expand...
Click to collapse
thanks ill leave it on the charger overnight and ill try this again tomorrow on a different pc.
crookx said:
thanks ill leave it on the charger overnight and ill try this again tomorrow on a different pc.
Click to expand...
Click to collapse
well looks like i did everything to try and make the pc read my bricked moto x with no luck. guess this phones dead. guess ill sell it as is for parts...
Oh tough luck! If its under warranty you can just go and tell them you got an ota update and while updating it suddenly stopped and never came back... Worth a try..
Posting here to subscribe to save for future reference. Good job.
MotoX Developer Edition, Bootloader Unlocked, Rooted, Stock with tweaks!
Just wanna thank you.... Revive my bricked moto x after a failed update.... God bless you man...
so a little update on my bricked device... now whenever i plug in my moto x to the pc and hold the power button a green led light from the speakers would light up for a few seconds and the pc would make a sound like a device has been connected but after a few seconds it makes a sound like the device has been disconnected. anyone know what this could mean?
crookx said:
so a little update on my bricked device... now whenever i plug in my moto x to the pc and hold the power button a green led light from the speakers would light up for a few seconds and the pc would make a sound like a device has been connected but after a few seconds it makes a sound like the device has been disconnected. anyone know what this could mean?
Click to expand...
Click to collapse
That means its looking for ghusb driver , means you may be able to Frankenstein your moto back to life
Sent on my Lenoto A2109 tablet
flashallthetime said:
That means its looking for ghusb driver , means you may be able to Frankenstein your moto back to life
Sent on my Lenoto A2109 tablet
Click to expand...
Click to collapse
keeps getting connected and disconnected. should i just keep trying i guess lol im getting kinda excited
crookx said:
keeps getting connected and disconnected. should i just keep trying i guess lol im getting kinda excited
Click to expand...
Click to collapse
Sounds like it may just come back to life yet. You're using a usb 2.0 (not 3.0) port right?
Steve-x said:
Sounds like it may just come back to life yet. You're using a usb 2.0 (not 3.0) port right?
Click to expand...
Click to collapse
im using the stock usb that came with the phone.
crookx said:
im using the stock usb that came with the phone.
Click to expand...
Click to collapse
I was meaning the port on the computer itself. Newer 3.0 compatible ports often don't work as well for stuff like this.
crookx said:
im using the stock usb that came with the phone.
Click to expand...
Click to collapse
Steve x was referring to the USB port in the computer
Sent on my Gummy running Lenoto X
Steve-x said:
I was meaning the port on the computer itself. Newer 3.0 compatible ports often don't work as well for stuff like this.
Click to expand...
Click to collapse
ohh my bad, yeah im using 2.0
I was using my motorola droid razr xt 907 m and install safestrap and gave to wipe cache partition, wipe system and also my motorola frizzy now does not work stays in the m finware Use flash script and I put finware official global motorola http :/ / sbf.droid-developers.org/phone.php? device = 8 and I put the Android 4.4.2
Finware Blur_Version.183.46.10.XT907.Verizon.en.US the script and install flash but the touch is not working and when you press the volume button to turn the volume up but no sound now is the option to configure the language and when I connect the charger it's not nesecito load please help fix this issue I hope your answers
garusitohd said:
I was using my motorola droid razr xt 907 m and install safestrap and gave to wipe cache partition, wipe system and also my motorola frizzy now does not work stays in the m finware Use flash script and I put finware official global motorola http :/ / sbf.droid-developers.org/phone.php? device = 8 and I put the Android 4.4.2
Finware Blur_Version.183.46.10.XT907.Verizon.en.US the script and install flash but the touch is not working and when you press the volume button to turn the volume up but no sound now is the option to configure the language and when I connect the charger it's not nesecito load please help fix this issue I hope your answers
Click to expand...
Click to collapse
See if you can use the Razr M Utility to fully restore the phone. I know it works if your bootloader is unlocked, but I don't know if it is locked. Worth a shot. Boot into Fastboot Mode (Google It) and run the script.
Script: http://forum.xda-developers.com/showthread.php?t=2249773
Originally Posted by garusitohd View Post I was using my motorola droid razr xt 907
Use this program and can not do anything
i am master of moto
garusitohd said:
I was using my motorola droid razr xt 907 m and install safestrap and gave to wipe cache partition, wipe system and also my motorola frizzy now does not work stays in the m finware Use flash script and I put finware official global motorola http :/ / sbf.droid-developers.org/phone.php? device = 8 and I put the Android 4.4.2
Finware Blur_Version.183.46.10.XT907.Verizon.en.US the script and install flash but the touch is not working and when you press the volume button to turn the volume up but no sound now is the option to configure the language and when I connect the charger it's not nesecito load please help fix this issue I hope your answers
Click to expand...
Click to collapse
i fix this issue contact me 100% facebook id [email protected]
gmail id [email protected]