[Q] As Unbrick Motorola Droid RAZR M!! - Droid RAZR M Q&A, Help & Troubleshooting

I was using my motorola droid razr xt 907 m and install safestrap and gave to wipe cache partition, wipe system and also my motorola frizzy now does not work stays in the m finware Use flash script and I put finware official global motorola http :/ / sbf.droid-developers.org/phone.php? device = 8 and I put the Android 4.4.2
Finware Blur_Version.183.46.10.XT907.Verizon.en.US the script and install flash but the touch is not working and when you press the volume button to turn the volume up but no sound now is the option to configure the language and when I connect the charger it's not nesecito load please help fix this issue I hope your answers

garusitohd said:
I was using my motorola droid razr xt 907 m and install safestrap and gave to wipe cache partition, wipe system and also my motorola frizzy now does not work stays in the m finware Use flash script and I put finware official global motorola http :/ / sbf.droid-developers.org/phone.php? device = 8 and I put the Android 4.4.2
Finware Blur_Version.183.46.10.XT907.Verizon.en.US the script and install flash but the touch is not working and when you press the volume button to turn the volume up but no sound now is the option to configure the language and when I connect the charger it's not nesecito load please help fix this issue I hope your answers
Click to expand...
Click to collapse
See if you can use the Razr M Utility to fully restore the phone. I know it works if your bootloader is unlocked, but I don't know if it is locked. Worth a shot. Boot into Fastboot Mode (Google It) and run the script.
Script: http://forum.xda-developers.com/showthread.php?t=2249773

Originally Posted by garusitohd View Post I was using my motorola droid razr xt 907
Use this program and can not do anything

i am master of moto
garusitohd said:
I was using my motorola droid razr xt 907 m and install safestrap and gave to wipe cache partition, wipe system and also my motorola frizzy now does not work stays in the m finware Use flash script and I put finware official global motorola http :/ / sbf.droid-developers.org/phone.php? device = 8 and I put the Android 4.4.2
Finware Blur_Version.183.46.10.XT907.Verizon.en.US the script and install flash but the touch is not working and when you press the volume button to turn the volume up but no sound now is the option to configure the language and when I connect the charger it's not nesecito load please help fix this issue I hope your answers
Click to expand...
Click to collapse
i fix this issue contact me 100% facebook id [email protected]
gmail id [email protected]

Related

[Q] Flashing an SBF on the Pro

How do I flash the SPF file just in case I get a bricked Pro? I have a rooted Droid Pro with ClockworkMod Recovery installed from the Droid 2 Bootstrap.
I know how to go into CWM Recovery but only from the bootstrap... let's say my Droid Pro gets bricked and it doesn't start up and only gets stuck in a boot loop, then how do I flash the SBF file?
Thanks for the help, wish there was a fool-proof guide, I'm too spoiled from the ease of flashing a Droid Incredible.
You don't need CWM recovery to flash the stock SBF, you need it for installing CMW backups.
If your phone is bricked, use the stock recovery and flash the stock SBF. Stock recovery: R + M + Power on.
And after you get a working phone, re-flash CWM Recovery & the bootstrap, and use the backup you have.
When I try power + R + M all I get is an exclamation mark and the android logo?
Tell me if this is right...
I hold down both up/down volume buttons and then turn on, and then it shows me the Motorola locked bootloader screen that says "Plug in USB for programming"
Say I plug in my USB to my PC that has Moto Drivers & RSD Lite can I just flash the SBF that way? Nobody has really said literately how to do it, so I don't truly know since I have zero experience flashing Moto phones.
To flash SBF:
- Turn on USB debugging
- Connect phone to PC in PC mode
- Open RDS Lite as ADMINISTRATOR (right click on the .exe and go to run as Administrator)
- Select your SBF
- Click Start
@class: You're right and I'm wrong, I got recovery and boot loader modes mixed up.
al2x: Try what @class said.
@Class said:
To flash SBF:
- Turn on USB debugging
- Connect phone to PC in PC mode
- Open RDS Lite as ADMINISTRATOR (right click on the .exe and go to run as Administrator)
- Select your SBF
- Click Start
Click to expand...
Click to collapse
Is there a way to flash the SBF from a Mac (no RSD Lite) ?
sbf from Mac command line
John Markley said:
Is there a way to flash the SBF from a Mac (no RSD Lite) ?
Click to expand...
Click to collapse
Rephrasing my own question - Is there a way to flash sbf using Mac OSX unix command line (Terminal)? JM
mydroidworld.com/forums/droid-pro-discussions/6042-droid-pro-sbf-file-2-26-20-full-rsdlite.html
2nd post is the Droid Pro SBF Files. They are at 2.26.20 so you will have to do a 14mb update after the SBF install.
You will need RSDLite to unbrick your droid.
megaupload.com/?d=N1MPCX1U
- PASSWORD IS: alabama - You will also need the alabama password to extract the compressed file!
If you need any help with a bricked android phone, let us know here!
@Class said:
When I try power + R + M all I get is an exclamation mark and the android logo?
Click to expand...
Click to collapse
click the @ symbol. use the vol+ and vol- buttons to scroll and the enter button on the keyboard to select

[Q] Motorola Razr Maxx downgrade Failed, where to go from here ?

Hello Xda users.
A n00b incoming -
I am working on a project - where I need the Motorola Razr maxx to use Android 2.3.X, because of some software issues, when I upgraded the phone to 4.0.4.
So I tried to downgrade ( I know alot of ppl - are saying it cant be done ) but I tried anyway - my team and I dont have the time til wait for a software upgrade because of the deadline for the project.
First I tried google and did use:
http://forum.xda-developers.com/showthread.php?t=1586570&highlight=search+this+forum
to root the phone - didnt work.
Tryed to flash it with RSD = fail.
I did get it Rooted.
Then I tried too use
http://droidrazrroot.com/droid-razr...ted-droid-razr-back-to-android-2-3-66-12-173/
to flash it - but but it failed.
Now I got a screen with,
Invalid Flash Mode (S) (Boot Failed)
0A.6C
To return to normal mode - first press power key to power down
Device is Locked. Status Code: 0
Battery OK
OK to program
Transfer Mode:
USB Connected.
Invalid CG OTV (CG: system); Invalid SP Data
Invalid CG Version(CG: system)
Invalid CG OTV (CG: system)
After I had google this, I understand I need to flash the phone with the rigth ROM,
Iam from Denmark and phone is bougth here.
I have tried all european ROMS from :
http://forum.xda-developers.com/showthread.php?t=1362956
and mounted the XML with RSD lite - but it failing.
Where do I get a ROM I can used with RSD ?
Iam sorry if I have posted this in thw wrong section.
// Fiskeren
Not wrong section but wrong device. There is a lot of good information on www.droidrzr.com
Sent from my DROID RAZR using Tapatalk 2

[Q] Uninstalled the default launcher and then did a factory reset. Help Me!

I rooted my motorola defy. Installed a Holo launcher. Uninstalled the default motorola launcher and did a factory reset. The result is that my phone is left without a launcher and no google account associated with the phone. When I boot my phone I can only see a clock on the the screen and an emergency call button. The emergency call dial pad is the only interactive part of the screen.
Phone: Motorola Defy (most probably) Red lense without Motoblur (I am not sure what Motoblur is, in which case I am guessing I dont have it)
ROM: Stock Froyo (official upgrade from eclair)
Recovery: Stock recovery
Location: India
Following are the methods I tried:
METHOD 1
Cant install launcher from the google play website on desktop because no account is associated with the phone.
METHOD 2
Use the motorola offical upgrade tool
I havent tried this since I had already upgraded to froyo using this same tool.
Question: Can I use this again to flash/repair my stock ROM.
METHOD 3
Tried to create update.zip for a Launcher using a tutorial on this site. Signed it using Auto-Sign (as explained in the tutorial). But when I try to install it using stock recovery, it still says signature verification failed.
METHOD 4
ADB
I setup ADB for the first time on my desktop. I had the drivers installed since my computer recognized the phone and the MotoHelper was running when I plugged in my phone. But the adb was unable to detect my device. Maybe because by default the USB debugging is unchecked.
Please help me:crying:
ni****h91 said:
I rooted my motorola defy. Installed a Holo launcher. Uninstalled the default motorola launcher and did a factory reset. The result is that my phone is left without a launcher and no google account associated with the phone. When I boot my phone I can only see a clock on the the screen and an emergency call button. The emergency call dial pad is the only interactive part of the screen.
Phone: Motorola Defy (most probably) Red lense without Motoblur (I am not sure what Motoblur is, in which case I am guessing I dont have it)
ROM: Stock Froyo (official upgrade from eclair)
Recovery: Stock recovery
Location: India
Following are the methods I tried:
METHOD 1
Cant install launcher from the google play website on desktop because no account is associated with the phone.
METHOD 2
Use the motorola offical upgrade tool
I havent tried this since I had already upgraded to froyo using this same tool.
Question: Can I use this again to flash/repair my stock ROM.
METHOD 3
Tried to create update.zip for a Launcher using a tutorial on this site. Signed it using Auto-Sign (as explained in the tutorial). But when I try to install it using stock recovery, it still says signature verification failed.
METHOD 4
ADB
I setup ADB for the first time on my desktop. I had the drivers installed since my computer recognized the phone and the MotoHelper was running when I plugged in my phone. But the adb was unable to detect my device. Maybe because by default the USB debugging is unchecked.
Please help me:crying:
Click to expand...
Click to collapse
Method 2 should work but in case you are lost you should carefully read this thread:
http://forum.xda-developers.com/showthread.php?t=1216982
Since your device is rooted, you should try to install some of the latest Quarx's ROMS CM 7 [GB] or CM 10 [JB], that should solve your problem.
The update tool does not detect my model, it only detects imei. pls suggest something else
ni****h91 said:
The update tool does not detect my model, it only detects imei. pls suggest something else
Click to expand...
Click to collapse
Do you have an old nandroid backup? Try restoring it if you do.
OR
Upgrade to CM7.2 or CM10 or MS2Ginger even.
ni****h91 said:
I rooted my motorola defy. Installed a Holo launcher. Uninstalled the default motorola launcher and did a factory reset. The result is that my phone is left without a launcher and no google account associated with the phone. When I boot my phone I can only see a clock on the the screen and an emergency call button. The emergency call dial pad is the only interactive part of the screen.
Phone: Motorola Defy (most probably) Red lense without Motoblur (I am not sure what Motoblur is, in which case I am guessing I dont have it)
ROM: Stock Froyo (official upgrade from eclair)
Recovery: Stock recovery
Location: India
Following are the methods I tried:
METHOD 1
Cant install launcher from the google play website on desktop because no account is associated with the phone.
METHOD 2
Use the motorola offical upgrade tool
I havent tried this since I had already upgraded to froyo using this same tool.
Question: Can I use this again to flash/repair my stock ROM.
METHOD 3
Tried to create update.zip for a Launcher using a tutorial on this site. Signed it using Auto-Sign (as explained in the tutorial). But when I try to install it using stock recovery, it still says signature verification failed.
METHOD 4
ADB
I setup ADB for the first time on my desktop. I had the drivers installed since my computer recognized the phone and the MotoHelper was running when I plugged in my phone. But the adb was unable to detect my device. Maybe because by default the USB debugging is unchecked.
Please help me:crying:
Click to expand...
Click to collapse
I too faced the same problem ...after a heavy search found a solution from a blog ...for that i installed mobilego windows application in pc and then a installed launcher app from pc manually . ...try this
ni****h91 said:
I rooted my motorola defy. Installed a Holo launcher. Uninstalled the default motorola launcher and did a factory reset. The result is that my phone is left without a launcher and no google account associated with the phone. When I boot my phone I can only see a clock on the the screen and an emergency call button. The emergency call dial pad is the only interactive part of the screen.
Phone: Motorola Defy (most probably) Red lense without Motoblur (I am not sure what Motoblur is, in which case I am guessing I dont have it)
ROM: Stock Froyo (official upgrade from eclair)
Recovery: Stock recovery
Location: India
Following are the methods I tried:
METHOD 1
Cant install launcher from the google play website on desktop because no account is associated with the phone.
METHOD 2
Use the motorola offical upgrade tool
I havent tried this since I had already upgraded to froyo using this same tool.
Question: Can I use this again to flash/repair my stock ROM.
METHOD 3
Tried to create update.zip for a Launcher using a tutorial on this site. Signed it using Auto-Sign (as explained in the tutorial). But when I try to install it using stock recovery, it still says signature verification failed.
METHOD 4
ADB
I setup ADB for the first time on my desktop. I had the drivers installed since my computer recognized the phone and the MotoHelper was running when I plugged in my phone. But the adb was unable to detect my device. Maybe because by default the USB debugging is unchecked.
Please help me:crying:
Click to expand...
Click to collapse
Hey could you find a solution to this problem?I am having the exact same problem. Please let me know if you have. Thanks
Ziamd19 said:
Hey could you find a solution to this problem?I am having the exact same problem. Please let me know if you have. Thanks
Click to expand...
Click to collapse
I'm on jelly bean, but, somehow, my device managed to show setting menu as i hit menu button. So i can go to internet setting, set and activated my apn. Then i go to apps menu. I go to all apps, then scrolling to google play, clicked on there, then showing me a bunch of summaries, and i scroll it down untill i found "activate" button.
Clicked that button, it opens me google play setup. So, i sets it right, brings me to google play home, searching for launcher (i use apex) download and install. After it finished downloading, i hit home button and, viola, i had my launcher.
If ur phone had default file manager isntalled, and u had ur launcher.apk, then it is lot easier, with the same method, but this time, instead activate g-play, activate ur file manager and installing ur launcher from there.
Note: still, i can't install launcher2.apk, the default launcher i've uninstalled. Anyone can help?
help, my motorola defy stops at "touch the android to begin". what to do? i think stock recovery doesn't work either, but, i'm new to this so i can't tell for sure. any advices step by step? thanks.
Try to flash sbf-file.
- Download and install Motorola Defy driver
- Download and install RSD Lite
- Open RSD Lite
- Enter Bootloader Mode on you phone (Power+VolUp)
- Connect phone to you PC (USB)
- Open RSD - Lite
- Flash new SBF
masbitxo said:
Try to flash sbf-file.
- Download and install Motorola Defy driver
- Download and install RSD Lite
- Open RSD Lite
- Enter Bootloader Mode on you phone (Power+VolUp)
- Connect phone to you PC (USB)
- Open RSD - Lite
- Flash new SBF
Click to expand...
Click to collapse
thanks for the reply.
but, how do i know what sbf to use for flahsing?
i have this info from rsd
HW Model = TBP
HW Version = PCR
SW Version =1.540
sw model =4017
ftm version = 1.210
rf band id =gsm_band_1234, wcdma_band_15
and also a rsd log with many error.
Hi! I see in another post that your model is XT535. Here I leave a link where you have three links.
http://www.firmware-team.com/showthread.php?t=153
You should know that your version of android had originally Defy (2.3.6 or official ICS), surely if it was ICS version, will not be able to install a 2.3.6, but I can assure you (my model is the Defy MB525 and therefore I can not be of much help). Also take a look at this other link, that maybe you also helps.
http://forum.xda-developers.com/showthread.php?t=1827338
ok, thank you very much.
i'l llook over the links !!
hey, thanks for the replies. i already solved the problem and yes, you're right, i managed it with the file TBP-1540-0-4017-A03_sec_moto_RFM from 1st link.
so, for further references, if your motorola defy xt535 starts but stops at the "touch the android to begin" screen, download this file TBP-1540-0-4017-A03_sec_moto_RFM, open rsd lite, open phone in bootmode ( volume up + power button pressed together), connect the phone to pc with usb cable, open the downloaded file in rsd and press start. this is how i managed to resolbe my problem and i hope it will help others.
thanks again for your replies.
if rsd gives an error saying "error sending ram download for bootloader" it means the file you are using doesn't match your phone and you have to look for the proper one: select phone while connected in rsd and in the left panel it should show the info about the phone, like this:
Technology: GSM850;GSM900;GSM1800;GSM1900;WCDMA850;WCDMA2100
Software Version: XT535_1_540_4017
Flex Version: TBP-4017-019-2
Bootloader Version: N/A
DRM Version: N/A
Bound Signature: Allowed
so, as you can see, the software for mine is 1_540_4017, as the file i was using.
those being said, i hope it will help others.
thanks you all for your help. - See more at: http://modmymobile.com/forums/637-m...cant-get-pass-android-screen.html#post4128151

Help Motorola Defy xt535!!!

First of all my english isn't too good
I bought the phone then i wanted to upgrade to ics I followed neokragu's post and when I was finishing and i saw the link of google apps was down so now i want to go back to my normal android and i cant HELPPPP Please :crying: :crying: I want my phone back.
And I didn't make a security copy.
mewdark said:
First of all my english isn't too good
I bought the phone then i wanted to upgrade to ics I followed neokragu's post and when I was finishing and i saw the link of google apps was down so now i want to go back to my normal android and i cant HELPPPP Please :crying: :crying: I want my phone back.
And I didn't make a security copy.
Click to expand...
Click to collapse
Why don't you try this, I think it will be more good for you.
http://forum.xda-developers.com/showthread.php?t=1827338
---------------------------------------
THANKS NEWER HURT ANYBODY
---------------------------------------
How to unbrick Motorola Defy XT535
Hello android geeks,
Please help me
Scenario
1. i was using chinese ics rom in my defy xt535. due to more problems with that rom, i flashed with Gingerbread rom. But i forge to wipe partition data before flashing . so i was unable to pass beyond red m logo
2. when i tried to enter recovery menu. i got a blank screen with green android with yellow exclamation mark within white triangle
3. again i flashed with chinese ics , again without clearing partition data (because i am not able to access recovery mode). now i am able to enter android , But touch screen is not working
What I have tried
1. I tried erasing phone data using Wondershare mobile transfer, but i failed as it is possible only if I enable USB debugging. sadly i cannot enable usb debugging as my touch screen is not working
Advantages
1. I can access bootloader (white screen) by pressing power button and up button
2. I can able to pass beyond moto logo, which is a good sign that the phone can be saved
Disadvantages
1. Unable to enter recovery mode (Yellow exclamation mark)
2. Touch screen is NOT working, so not able to enable usb debugging
Doubts
1. How to check whether my touch screen problem is software oriented or hardware oriented?
2. What is the method to completely erase phone data without entering recovery mode, no root, and without touch screen functionality?
3. Is there any way to install recovery menu without root function and without touch screen function?
4. My idea is to completely erase all the phone data and flashing it with gingerbread rom? Is it right or is there any other alternatives?
Things I have
1. Bricked Defy XT535
2. Laptop and PC with windows 7
3. USB cable
4. RSD Lite
5. SUTLR
6. Patch files to root Defy XT535
7. Chinese ICS ROM
8. Gingerbread ROM
9. Wondershare Mobile transfer
If you feel i have missed few details, please notify me
I am one among the few indian XT535ians, please help me to save the rugged device
my email id [email protected]
thank you
I know nothing about your software problems but couldn't you plug a PC mouse into the Defy using a USB OTG cable and change any settings you need to with it ?
sivasucmc said:
Hello android geeks,
Please help me
Scenario
1. i was using chinese ics rom in my defy xt535. due to more problems with that rom, i flashed with Gingerbread rom. But i forge to wipe partition data before flashing . so i was unable to pass beyond red m logo
2. when i tried to enter recovery menu. i got a blank screen with green android with yellow exclamation mark within white triangle
3. again i flashed with chinese ics , again without clearing partition data (because i am not able to access recovery mode). now i am able to enter android , But touch screen is not working
What I have tried
1. I tried erasing phone data using Wondershare mobile transfer, but i failed as it is possible only if I enable USB debugging. sadly i cannot enable usb debugging as my touch screen is not working
Advantages
1. I can access bootloader (white screen) by pressing power button and up button
2. I can able to pass beyond moto logo, which is a good sign that the phone can be saved
Disadvantages
1. Unable to enter recovery mode (Yellow exclamation mark)
2. Touch screen is NOT working, so not able to enable usb debugging
Doubts
1. How to check whether my touch screen problem is software oriented or hardware oriented?
2. What is the method to completely erase phone data without entering recovery mode, no root, and without touch screen functionality?
3. Is there any way to install recovery menu without root function and without touch screen function?
4. My idea is to completely erase all the phone data and flashing it with gingerbread rom? Is it right or is there any other alternatives?
Things I have
1. Bricked Defy XT535
2. Laptop and PC with windows 7
3. USB cable
4. RSD Lite
5. SUTLR
6. Patch files to root Defy XT535
7. Chinese ICS ROM
8. Gingerbread ROM
9. Wondershare Mobile transfer
If you feel i have missed few details, please notify me
I am one among the few indian XT535ians, please help me to save the rugged device
my email id [email protected]
thank you
Click to expand...
Click to collapse
Did you try pressing vol up and down at the recovery screen?
Also - http://forum.xda-developers.com/showthread.php?t=1827338
Sent from my ATRIX HD using XDA Free mobile app

[INDEX] Motorola Droid Razr HD (2015)

[SIZE=+2]Motorola Droid Razr HD
[XT926] [XT925][/SIZE]
[SIZE=+2][INDEX][/SIZE]
[SIZE=+2]Helpful Information[/SIZE]​[SIZE=+1]Welcome, this thread has been created to encompass everything you may need for your device. Please only post in this thread with feedback on how to improve this document. Do not post "Thank you" type responses. If you have additional questions or require more help, ask in [Q&A][Motorola Droid Razr HD] [HELP THREAD] Ask ANY Question. Noob Friendly, try to find an existing thread, or create your own thread in the Droid Razr HD Q&A forum. Do not use this as a general help thread.[/SIZE]​Click on a Link below for More Info
Manufacturer's Device Home Page
Basic Device Information
Official Stock Firmware
Device Tools, Root/Un-root/Un-brick methods
Custom ROMs
Kernels & Radios
MODS, GUIDES, and Misc
*​Forum Rules | New Users Guide | XDA Tour | Report Posts​Please look for a similar INDEX thread when visiting another device forum.
If you would like to create an [INDEX] please Click Here.
A special thanks to everyone who contributed to the production of this INDEX​
Basic Device Information
Specs
XT925: Motorola RAZR HD - GSM - GMS Arena - Phone Arena -
XT926: Droid Razr HD - Verizon CDMA - GMS Arena - Phone Arena -
XT925/XT926 Compared: Phone Arena
Factory Reset and other Functions
Power the Device Up in Safe Mode - DROID RAZR HD / RAZR MAXX HD by MOTOROLA
Restart the Device in Safe Mode - DROID RAZR HD / RAZR MAXX HD by MOTOROLA
How to Reset Frozen Device/Soft Reset - DROID RAZR / RAZR MAXX by MOTOROLA
Perform a Factory Data Reset (Device Powered On) - DROID RAZR HD / RAZR MAXX HD by MOTOROLA
Perform a Factory Data Reset (Device Powered Off) - DROID RAZR HD / RAZR MAXX HD by MOTOROLA
Alternate Button Method to enter recovery
From the Android system recovery screen (exclamation point with an android figure), press and hold the Volume down button then press and release the volume up button to display the menu.
Select wipe data/factory reset.
Note Utilize the Volume buttons to highlight and the Power button to select.
Select Yes -- delete all user data.
Note Allow several seconds for the factory data reset process to complete.
Select reboot system now.
Note Allow several minutes for the reboot process to complete.
Note To setup the device after the reset has completed, refer to Initial Activation and Setup.
Boot Mode menu (android recovery, ap fastboot, …..)
Ensure the device is powered off.
Note If the screen is frozen, perform an alternate reset.
Press and hold the Volume Up button and Power buttons until the Boot Mode Selection Menu appears then release.
AP Fastboot Mode: use to flash .xml recovery file with RSD Lite
1st Option: Ensure the device is powered off.
Press and hold the Volume Up button and Power buttons until the Boot Mode Selection Menu appears then release.
From the Boot Mode Selection Menu, select AP Fastboot.
Note Utilize the volume down button to scroll through the options and the volume up button to select.
Note: If a selection is not made within 5 seconds, the device powers up normally.
2nd Option: Power Off, hold Volume Down Button, Press power button for 5 secs, then release both
USB Debugging Mode - DROID RAZR HD / RAZR MAXX HD by MOTOROLA
Enable Developer options
Settings>about phone>tap on Build Number several times until you see "You are Developer">press home button
Select Runtime: Art or Dalvik
Settings.>Developer Options (see Enable Developer options >select Run time>select Art or Dalvik>select Ok (device will reboot) optimizing apps will take a few minutes
Official Stock Firmware
There may be other mirrors listed in my
[INDEX]Motorola Unbricking Tools
XT926 Firmware
https://www.androidfilehost.com/?w=profile&uid=24269982087010314
http://www.filefactory.com/folder/0afec6cbce47070c/?sort=filename&order=ASC&show=100&page=1
[fxz] 4.4.2 183.46.15 by SamuriHL
http://www.drdevs.com/devs/FXZ-files/XT926 (Droid RAZR HD)/
http://web.archive.org/web/20130817112650/http://sbf.droid-developers.org/vanquish/list.php
DROID RAZR HD XT926 Firmwares SuperThread by Pzyduck (links Down 2015)
XT926 Firmware Details
VZW_XT926_4.4.2-KDA20.62-15.1_CFC_1FF.xml.zip
MD5: C9B67BB9D8FD89E5A9A4F48FE3D6D397
Size: 752 MB (789,248,361 bytes)
RSD Lite info:
Filename: VZW_XT926_4.4.2-KDA20.62-15.1_CFC_1FF.xml
Creation Date: 07/30/2014 21:01:20
File size: 2185
Sofware Version: vanquish_vzw-user 4.4.2 KDA20.62-15.1 15 release-keysVANQUISH_BP_100731.020.64.21P
For Phone Model: VZW_XT926_CFC​
VZW_XT926_4.4.2-KDA20.62-10.1_CFC_1FF.xml.zip
XT925 Firmware
http://fwteam.grupoandroid.com/RAZR HD XT925/ by Pzyduck
RAZR HD XT925 Firmwares SuperThread (Jelly Bean) by Pzyduck
http://web.archive.org/web/20130817132524/http://sbf.droid-developers.org/vanquish_u/list.php
Firmware RAZR HD XT925 Retail Brasil Jelly Bean 4.1.2 by "Firmware Team" by Pzyduck (Links down 2015)
Device Tools, Root/Un-root/Un-brick methods
USB Drivers
Motorola USB Drivers, RSD Lite, Firmware...
Root Tools, Bootloader Unlocking, Custom Recoveries, Unbricking...
[RSD Lite][TUTORIAL] How to Flash Stock Motorola Fastboot files by danifunker
House of Moto http://www.droidrzr.com/forum/138-samurihls-house-of-moto/
RSD Flasher http://www.droidrzr.com/forum/138-samurihls-house-of-moto/
Fastboot Reason: Sticky bit factory_fastboot
Rooting
For locked bootloaders with a kernel build date after June 3, 2014
[ROOT][Video] Droid Razr HD XT926- 183.46.15 w/Kernel newer than June 3, 2014 by sd_shadow
For locked bootloaders with a kernel build date before June 3, 2014
Root and bootloader unlock on stock KK by krystianp
Locked Bootloader
System Versions 182.46.10 and higher, with a Kernel date June 2014 and newer, the bootloader can not be unlocked, there are no custom roms for locked bootloaders at this time -25 June 2015.
There is a partially compatible bootstrapped recovery.
Working CWM Recovery for LOCKED 183.46.15 + Deodex and more by zachariahpope
Unlocked Bootloader
Root and your unlocked bootloader... by RikRong
For more on Bootloaders see XDA Wiki: Bootloaders​
Custom ROMs
For Unlocked Bootloaders only
http://forum.xda-developers.com/droid-razr-hd#romList
RAZR HD Android Development
RAZR HD Original Android Development
RAZR HD Themes and Apps
Kernels & Radios
Radios[
Tethering hacks
GSM Band Unlocking
[PATCH][GUIDE] Patch to fully enable GSM on Verizon CDMA Android phones (UnLocked Bootloader)
[HowTo] [VZW XT907/926 RAZR M/HD] Unlock US GSM Carriers Using RadioComm by cellzealot
[Tutorial] Unlock VZW Razr M/M HD (XT907/XT926) for U.S. Carriers *CDMA WS METHOD* by dragonhart6505
Kernels
MODS, GUIDES, and Misc
Factory Reset and Other Functions
Factory Data Reset (Device Powered Off) - DROID RAZR HD by MOTOROLA / MTOROLA / by Motorola
Restart the Device in Safe Mode - DROID RAZR HD by MOTOROLA / by Motorola - Verizon
How do I force my phone to reboot or restart when screen is frozen or phone is locked up?
Mods/Guides
[VIDEOS] Droid Razr HD How to root unlock restore recovery and rom by Tomsgt
[HOW TO][FIX] Recover your IMEI by madmonkey57
Official KitKat Bloatware Removal Thread by LifeAsADroid 23rd May 2014
[HOWTO] Remove The Unlocked Bootloader Warning logo by Orphee
VZW HOTSPOT / WIRELESS TETHER HACK
DEBLOAT LIST see DEBLOAT LIST
[KK] Add external SD Card writing for all apps
[WORKAROUND] Access hidden settings menus
[HowTo] [VZW XT907/926 RAZR M/HD] Unlock US GSM Carriers Using RadioComm
Hardware Repair
Razr HD & Razr HD MAXX Teardown by grant2
Discontinued/Abandoned
Saved
XT925 / XT926 with kernel date July 2014 or after
can now be unlocked with sunshine app
http://theroot.ninja/download.html
Hello, Shadow I just acquired the xt926 and wondering witch recovery to use to flash marshmallow or lollipop after I root and unlock the bootloader. Is it TWRP, CWM or SafeStrap? I am asking because I never owned this device before and did not see this device on the list of the latest version of TWRP. Some assistance would be much appreciated. Thanks for the post it was helpful.
OGdroidster said:
Hello, Shadow I just acquired the xt926 and wondering witch recovery to use to flash marshmallow or lollipop after I root and unlock the bootloader. Is it TWRP, CWM or SafeStrap? I am asking because I never owned this device before and did not see this device on the list of the latest version of TWRP. Some assistance would be much appreciated. Thanks for the post it was helpful.
Click to expand...
Click to collapse
OK, I no longer need assistance I figured it out and found witch version of TWRP to use on rootjunky. I just flashed DU 5.1.1. Everyone have a nice night.
If you have additional questions or require more help, try to find an existing thread, or create your own thread in the Q&A forum. Do not use this as a general help thread.
Sent from my XT1080 using XDA Labs
some cm links
http://web.archive.org/web/20161224225329/https://download.cyanogenmod.org/?device=xt926

Categories

Resources