Hello Guys, I'm living in Korea and I use G900K Korean Variants.
I want to install custom kernel but there are no kernel for korean model.
Can I install G900F's Kernel to my device..? I really want to use custom kernel.
SM-G900K Darthrom EDGE V2.4
Hi. The G900K has the same hardware like the G900F. Perform a nandroid backup and flash a custom kernel from the G900F of your choice. Theoretically it must work.
Umm....I tried it..
Solvin said:
Hi. The G900K has the same hardware like the G900F. Perform a nandroid backup and flash a custom kernel from the G900F of your choice. Theoretically it must work.
Click to expand...
Click to collapse
But after I flash the kernel.. my phone can't boot and into the Odin mode (could not do normal boot )
1. You flashed which kernel?
2. Do you flashed a recovery like TWRP or CWM?
3. Do you have a stock Touchwiz rom?
Re:
Solvin said:
1. You flashed which kernel?
2. Do you flashed a recovery like TWRP or CWM?
3. Do you have a stock Touchwiz rom?
Click to expand...
Click to collapse
1. Speedy kernel or Boeffla and etc. Which support G900F
2.Philz Touch (do you know?)
3.Not stock but touch wiz rom
Ok your phone is booting right now? I mean you flashed the original kernel back?
Don't use Philz because the development and support was stopped. Philz is out of date. Use TWRP or CWM, both recoverys have a touch function like Philz.
Please note that you have to flash the correct Boeffla kernel for your Rom Version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You say you have TW but a modified version. I don't know if that works with Boeffla kernel. You can try the kernel Samsung stock stable 1.2
If that does not work, than your Rom is not supported.
Solvin said:
Ok your phone is booting right now? I mean you flashed the original kernel back?
Don't use Philz because the development and support was stopped. Philz is out of date. Use TWRP or CWM, both recoverys have a touch function like Philz.
Please note that you have to flash the correct Boeffla kernel for your Rom Version.
View attachment 3464621
You say you have TW but a modified version. I don't know if that works with Boeffla kernel. You can try the kernel Samsung stock stable 1.2
If that does not work, than your Rom is not supported.
Click to expand...
Click to collapse
OK then your conclusion is 'change recovery' right?
Have to go to change my recovery.
If it failed, I will return and report. Thx
No that's not a problem of your recovery. That was only a information for you
I don't know...Boeffla kernel supports Darthrom Edge Rom? I don't think so.
Solvin said:
Hi. The G900K has the same hardware like the G900F. Perform a nandroid backup and flash a custom kernel from the G900F of your choice. Theoretically it must work.
Click to expand...
Click to collapse
Hey Solvin. I have a G900W8, would you also know if it has the same hardware as the G900F?
The only difference between G900W8, G900K and so on are the frequencies and basebands for GSM, LTE etc.
This things are included in your modem file and has nothing to do with the kernel or the used rom.
You have which rom? CyanogenMod? Touchwiz? Try to flash a kernel. Should the phone goes into a bootloop go back to recovery mode and flash your currently used rom again (the rom includes the original kernel).
I would try it to flash. But for the best safety: Perform always a nandroid backup before you flash.
Solvin said:
The only difference between G900W8, G900K and so on are the frequencies and basebands for GSM, LTE etc.
This things are included in your modem file and has nothing to do with the kernel or the used rom.
Click to expand...
Click to collapse
Thanks for the reply! I will be flashing custom roms soon. However, some mention that I have to get their own bootloader to use it, and again they say they are for the G900F. Just to confirm what you've mentioned earlier, since its only basebands that are altered in different variants, I should be able to use a G900F bootloader on my G900W8, correct?
Solving..?
Thanks for your advice. I think I Partially solve this problem.
Use Android Image Kitchen to extract boot.img into Ramdisk and split img,
And change boot.img-dtb with my korean kernel's boot.img-dtb.
Then I tryed to input kernel. and it success to boot!!
But small problem like earphone is in.
Gu1da said:
Thanks for the reply! I will be flashing custom roms soon. However, some mention that I have to get their own bootloader to use it, and again they say they are for the G900F. Just to confirm what you've mentioned earlier, since its only basebands that are altered in different variants, I should be able to use a G900F bootloader on my G900W8, correct?
Click to expand...
Click to collapse
You can try to use the other bootloader from the new rom, but before you do that download the original bootloader from the G900W8 to flash it back via odin, if you are in a bootloop. The G900W8 has no locked bootloader, you are free to flash and flash again.
Solvin said:
You can try to use the other bootloader from the new rom, but before you do that download the original bootloader from the G900W8 to flash it back via odin, if you are in a bootloop. The G900W8 has no locked bootloader, you are free to flash and flash again.
Click to expand...
Click to collapse
Thanks again, just concerned about bricking my phone.
Regarding your issue Kim, try plugging in and unplugging a pair of earphones. The issue happens on mine sometimes and that usually fixes it, but I doubt the solution is that simple in your case. Worth a shot.
Related
Can anyone help me finding stock Kernel w/ kexec-hardboot patch for Android 4.4 for multirom?
Im not able to get the version of my primary ROM is based on
(or)
Can i use third-party kernel?
...
Im on 4.4 (KRT16O) Manually flashed factory image (developers.google. com/android/nexus/images#occamkrt16o).
Unfortunately i tried installing other kernel and encountered boot-loop and I had to flash factory image again..
(I used multirom before [before flashing stock 4.4] and used stock 4.3 JWRXXX kexec-hardboot patch kernel. That worked fine.)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instead of flashing the whole factory image again, what you do is something called a backup in your custom recovery. Select to backup "boot" partition, which is the kernel, so if the kernel doesn't work, you can restore just the boot partition. Or you can just use fastboot to restore the stock kernel. Some kernels package flash other files to your system though, so you can do a full restore.
You can give NEO kernel a try, wifi will not work (due to 4.3 kernels lacking the new PRIMA driver) (it'lll work with KitKat), but you can flash the dePRIMAtor package to fix it: http://www.androidfilehost.com/?a=show&w=files&flid=9271
You can try and use the faux kernel from this AOKPK rom as well: http://goo.im/devs/kecinzer/aokpk/mako
eksasol said:
Instead of flashing the whole factory image again, what you do is something called a backup in your custom recovery. Select to backup "boot" partition, which is the kernel, so if the kernel doesn't work, you can restore just the boot partition. Or you can just use fastboot to restore the stock kernel. Some kernels package flash other files to your system though, so you can do a full restore.
You can give NEO kernel a try, wifi will not work (due to 4.3 kernels lacking the new PRIMA driver) (it'lll work with KitKat), but you can flash the dePRIMAtor package to fix it: http://www.androidfilehost.com/?a=show&w=files&flid=9271
You can try and use the faux kernel from this AOKPK rom as well: http://goo.im/devs/kecinzer/aokpk/mako
Click to expand...
Click to collapse
Thanks a looot for kernel backup information it worked flawlessly..
But the above mentioned kernels didn't work either i encountered boot-loop again and restored it by the method u suggested.
I need any 4.4 kernel with kexec-hardboot patch (http://forum.xda-developers.com/showthread.php?t=2472316)..
Sidnexus4 said:
Thanks a looot for kernel backup information it worked flawlessly..
But the above mentioned kernels didn't work either i encountered boot-loop again and restored it by the method u suggested.
I need any 4.4 kernel with kexec-hardboot patch (http://forum.xda-developers.com/showthread.php?t=2472316)..
Click to expand...
Click to collapse
there arent any. considering that the code has to be built into the kernel, and 4.4 kernel source hasnt been releaded yet.
simms22 said:
there arent any. considering that the code has to be built into the kernel, and 4.4 kernel source hasn't been releaded yet.
Click to expand...
Click to collapse
Thanks for the information..
Planning to install rom : http://forum.xda-developers.com/showthread.php?t=2472316
and flash Linaro 4.8.2 kernel : http://forum.xda-developers.com/showthread.php?t=2414064 for multirom hope it works.
i will post the result by an hr.
Sidnexus4 said:
Thanks for the information..
Planning to install rom : http://forum.xda-developers.com/showthread.php?t=2472316
and flash Linaro 4.8.2 kernel : http://forum.xda-developers.com/showthread.php?t=2414064 for multirom hope it works.
i will post the result by an hr.
Click to expand...
Click to collapse
you can try trinity kernel as well, it has the multirom stuff included, and runs on 4.4 roms. heres the latest trinity, tf18b http://goo.gl/RvKALI
Lianro kernel Neo17 worked great for multirom on NEXUS 5 PORT 4.4 KRT16O : http://forum.xda-developers.com/showthread.php?t=2507021 (Rom is far better than the original stock image. It includes all the missing features on stock)
Thanks everyone for the support :victory:
I am using Neo kernel with my stock kitkat and multirom boot into other android roms just fine. No need for ports.
eksasol said:
I am using Neo kernel with my stock kitkat and multirom boot into other android roms just fine. No need for ports.
Click to expand...
Click to collapse
Yeah i realized that later thanks i flashed older Neo version which doesn't have kitkat black screen fix..
In port rom i got "transparent navigation bar" , left swipe "googlenow" which are missing in stock and "ok google" on home-screen worked better then the stock one.
Sidnexus4 said:
Yeah i realized that later thanks i flashed older Neo version which doesn't have kitkat black screen fix..
In port rom i got "transparent navigation bar" , left swipe "googlenow" which are missing in stock and "ok google" on home-screen worked better then the stock one.
Click to expand...
Click to collapse
Have you got knex hardboot then because I need that for Ubuntu touch you don't need knex hardboot for android roms
JJMACCA said:
Have you got knex hardboot then because I need that for Ubuntu touch you don't need knex hardboot for android roms
Click to expand...
Click to collapse
I think its needed for android roms too. when ever i need to boot into another rom after flashing it says knex hardboot needed and it doesn't start up..
As i posted earlier neo kernel worked fine on 4.4(internal rom) with dePRIMAtor file (www.androidfilehost. com/?a=show&w=files&flid=9271).
Hopefully Tasssadar is patching the stock 4.4 kernel with kexec-hardboot.
To be able to get 4.4 running as "internal" Multirom.
mar_sch said:
Hopefully Tasssadar is patching the stock 4.4 kernel with kexec-hardboot.
To be able to get 4.4 running as "internal" Multirom.
Click to expand...
Click to collapse
Great!
Can you give us the link here??
activexda said:
Great!
Can you give us the link here??
Click to expand...
Click to collapse
here z the page... check for the link in second post..
http://forum.xda-developers.com/showthread.php?t=2472295
Hello, I cannot My AT&T Galaxy S4 into recovery mode. According to Boot Manager I have 2 recoveries already installed(CWM and TWRP) but every time I try reboot into recovery I get "Could not do Normal Boot ODIN MODE". I installed one of the recoveries using Goo manager and because it didn't work I tried with boot manager, What am I missing?
Goo Manager doesn't work for the AT&T S4... I did the same thing a while back. You need to use Safestrap for this phone. Look for the right version of it. I'm assuming you are using the stock ROM so find out what software version you are on and download the right version of Safestrap. Good luck.
Btw I forgot to add that you lost your stock recovery so you don't have one anymore. You can take it to a bestbuy and tell them Kies broke your phone and they can reflash it for you, or you can install a custom recovery.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Also, you can't have 2 recoveries installed at "same time". Find your build in settings. If mf3/mk2/nb1 you can't flash custom recoveries. Will also be limited to TW roms. You must use SafeStrap. So, probably need to get very familiar with it before going farther.
Good Luck on it--
Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks, I'm on MK2. I get this message in Rom manager, should I proceed to install Safestrap?
Sorry for the picture size, don't know how to resize.
You need to use ODIN to flash the original firmware back to your phone (MK2 from the looks of it). Then, install safetrap using the instructions available in the Safestrap thread. Make sure you read the entire thread before you do anything. As already mentioned, only safestrap will work with your phone, not Goo Manager and not ROM Manager.
scott14719 said:
You need to use ODIN to flash the original firmware back to your phone (MK2 from the looks of it). Then, install safetrap using the instructions available in the Safestrap thread. Make sure you read the entire thread before you do anything. As already mentioned, only safestrap will work with your phone, not Goo Manager and not ROM Manager.
Click to expand...
Click to collapse
DITTO
Austie1337 said:
Goo Manager doesn't work for the AT&T S4... I did the same thing a while back. You need to use Safestrap for this phone. Look for the right version of it. I'm assuming you are using the stock ROM so find out what software version you are on and download the right version of Safestrap. Good luck.
Btw I forgot to add that you lost your stock recovery so you don't have one anymore. You can take it to a bestbuy and tell them Kies broke your phone and they can reflash it for you, or you can install a custom recovery.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Is there a way I can flash the stock recovery myself? I'm not in the US. Also, I installed Safestrap without flashing the original firmware and everything seems to be working fine. Should I reflash it anyways? I want to run a custom rom (Hyperdrive RLS15) and I'm new to all of this.Thank you for all your answers!
LeoZ100 said:
Is there a way I can flash the stock recovery myself? I'm not in the US. Also, I installed Safestrap without flashing the original firmware and everything seems to be working fine. Should I reflash it anyways? I want to run a custom rom (Hyperdrive RLS15) and I'm new to all of this.Thank you for all your answers!
Click to expand...
Click to collapse
Its all up to you if you wanna flash a custom ROM. Personally I don't because I have always had bad luck with modding phones and tablets. that's why I only root, but don't let that discourage you. Make sure that you have the correct ROM for your device before installing it.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
LeoZ100 said:
Is there a way I can flash the stock recovery myself? I'm not in the US. Also, I installed Safestrap without flashing the original firmware and everything seems to be working fine. Should I reflash it anyways? I want to run a custom rom (Hyperdrive RLS15) and I'm new to all of this.Thank you for all your answers!
Click to expand...
Click to collapse
Do a backup before flashing anything.
Sent from my SGH-I337 using Tapatalk
i9515 (XSG)
hi guys..
my phones first stock rom was android 4.4.2 (united arab emirates)
laters i upgraded it to 5.0.1
i did flashed cm13 android 6.0 to my galaxy i9515 jfvelte 2days ago, i tired
recovery: twrp
i uninstalled all root apps, in twrp wipe all data
now i wanted to turn back latest stock rom 4.4.2 downloaded by sammobile
it fails
odin 3.10.6 got same error
odin 3.09 got same error
i tried another 4.4.2 roms on sammobile.
one of them is installing now.. we should see
edit: i've succesfullly installed rom
but wifi is not working
mobile data is ok
edit1: ONLY wifi is still not working
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That's because one cannot downgrade.
There is a downgrade guide, but it is for the I9505 only.
So I guess you're stuck with official lollipop roms, or maybe custom KitKat roms.
GDReaper said:
That's because one cannot downgrade.
There is a downgrade guide, but it is for the I9505 only.
So I guess you're stuck with official lollipop roms, or maybe custom KitKat roms.
Click to expand...
Click to collapse
so do you mean i won't install stock 5.0.1 rom too?
help..
sdstc said:
so do you mean i won't install stock 5.0.1 rom too?
Click to expand...
Click to collapse
Wrong!
Because the Marshmallow rom is NOT official firmware.
As I said before, you are stuck with official Lollipop firmware. But you can use any custom roms you like.
GDReaper said:
Wrong!
Because the Marshmallow rom is NOT official firmware.
As I said before, you are stuck with official Lollipop firmware. But you can use any custom roms you like.
Click to expand...
Click to collapse
thanks for help but i installed stock rom 4.4.2 but ONLY wifi is not working
rooted via cf-auto than deleted wifi folder no way...
opening and closing at the same time
That is kernel related.
GDReaper said:
That is kernel related.
Click to expand...
Click to collapse
what do you offer?
sdstc said:
what do you offer?
Click to expand...
Click to collapse
I suggest you flash a different kernel.
GDReaper said:
I suggest you flash a different kernel.
Click to expand...
Click to collapse
do you mean try another firmware?
sdstc said:
do you mean try another firmware?
Click to expand...
Click to collapse
No. Kernel is a different thing.
I think it's better for you if you flash a lollipop firmware.
Are you using the original Samsung cable to flash? Tried different USB ports and USB cables?
audit13 said:
Are you using the original Samsung cable to flash? Tried different USB ports and USB cables?
Click to expand...
Click to collapse
different cable
GDReaper said:
No. Kernel is a different thing.
I think it's better for you if you flash a lollipop firmware.
Click to expand...
Click to collapse
How should i search for web?
I find the s4 needs the original cable to flash via Odin. The s4 seems to be much more sensitive to USB cables than other phones I have used.
audit13 said:
I find the s4 needs the original cable to flash via Odin. The s4 seems to be much more sensitive to USB cables than other phones I have used.
Click to expand...
Click to collapse
The problem was that he was trying to downgrade, not the cables and USB ports. He actually managed to do it but now his WiFi won't work.
I guess I was making my post as the op was editing his post.
I am not that familiar with the i9515 but I though the 9515 shipped with LP firmware.
GDReaper said:
The problem was that he was trying to downgrade, not the cables and USB ports. He actually managed to do it but now his WiFi won't work.
Click to expand...
Click to collapse
i just installed latest lollipop rom working %100
but im trying to find firmware 4.4.2 working as well
i did not lots of solutions "root wifi folder rename,edit,configure some cfg files" according to web search (not related to kernel) but did not worked
don't i have any solution you think?
its DONE!!!!
i've tried previous Kitkat firmwares on sammobile one of them has worked so wifi is working.
i've no problem now. im not gonna use custom rom anymore
here is my story phone firmware timelime for days
1)stock rom 4.4.2
2)update 50.1
3)cm13 6.0 root xposed framework supersu everything have been tried
4)downgrade 4.4.2 latest stock rom wifi not worked
4)downgrade 4.4.2 first stock rom wifi working
4)upgraded 4.4.2 latest stock rom wifi working
so i tried flashing Philz touch recovery on my galaxy s4 ATNT using this http://forum.xda-developers.com/showpost.php?p=61496716&postcount=4479. I am on 4.4.2 NB1. Fresh format, Rooted after Format. so when i tried flashing philz touch, this is the result:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so how to fix this? can someone take me to the correct one? i have Samsung S4 ATnT rooted. 4.4.2 NB1.
----------------------------------------------------------------------------------------------------------------------------------------------------
i have another Question, is Albe95's LolliROM 8.0 official works on samsung s4 atnt? Can i flash it using Safestrap? can i flash it while im on 4.4.2? Can i flash it using stock recovery? can someone teach me the easiest way? skype? i need a VERY CLEAR explanation please I NEED GOOD DEV to explain it to me.
----------------------------------------------------------------------------------------------------------------------------------------------------
I NEED A GOOD DEV TO TALK TO THEM please pop up devs
Johnalexis69 said:
so i tried flashing Philz touch recovery on my galaxy s4 ATNT using this http://forum.xda-developers.com/showpost.php?p=61496716&postcount=4479. I am on 4.4.2 NB1. Fresh format, Rooted after Format. so when i tried flashing philz touch, this is the result:
so how to fix this? can someone take me to the correct one? i have Samsung S4 ATnT rooted. 4.4.2 NB1.
----------------------------------------------------------------------------------------------------------------------------------------------------
i have another Question, is Albe95's LolliROM 8.0 official works on samsung s4 atnt? Can i flash it using Safestrap? can i flash it while im on 4.4.2? Can i flash it using stock recovery? can someone teach me the easiest way? skype? i need a VERY CLEAR explanation please I NEED GOOD DEV to explain it to me.
----------------------------------------------------------------------------------------------------------------------------------------------------
I NEED A GOOD DEV TO TALK TO THEM please pop up devs
Click to expand...
Click to collapse
That phiztouch thread is for international S4 . If your phone is AT&T S4 SGH-i337, the forum you should be looking is here.
I can not see the image that you post but based on your writing your phone must be bricked since you flash the custom recovery on bootloader locked phone.
To unbrick your phone go here and follow the instructions.
I have not tried Albe95's LolliROM 8.0 official rom on AT&T S4. But somebody tried with SS though. You can read it here. However, he did not mentioned that his phone is AT&T S4 though.
To flash Albe's rom you need to be on lollipop and you can not flash with stock recovery. You have to use SS. I am using Albe rom that made for AT&T S4.
sway8966 said:
That phiztouch thread is for international S4 . If your phone is AT&T S4 SGH-i337, the forum you should be looking is here.
I can not see the image that you post but based on your writing your phone must be bricked since you flash the custom recovery on bootloader locked phone.
To unbrick your phone go here and follow the instructions.
I have not tried Albe95's LolliROM 8.0 official rom on AT&T S4. But somebody tried with SS though. You can read it here. However, he did not mentioned that his phone is AT&T S4 though.
To flash Albe's rom you need to be on lollipop and you can not flash with stock recovery. You have to use SS. I am using Albe rom that made for AT&T S4.
Click to expand...
Click to collapse
i can unbrick my phone, the problem is i cant flash my phone a custom recovery and a custom roms
EDIT: my phone is not bricked, the picture says that flashing the recovery failed
Johnalexis69 said:
i can unbrick my phone, the problem is i cant flash my phone a custom recovery and a custom roms
EDIT: my phone is not bricked, the picture says that flashing the recovery failed
Click to expand...
Click to collapse
Ohh, I thought your phone was bricked.
Custom recovery could be installed only on the AT&T phone with older bootloader (MDL/MDB). You mentioned that you are on NB1 4.4.2. So your bootloader is locked.
Your option for flashing custom rom is either safestrap or flashfire. You can find the instructions here and here.
If you like to install Albe's rom, the one compatible to your phone is this one.
Hello everyone....
Last month ago I was buy new S7 Edge 364 GB Korean version with Olleh provider, but it was unlocked. So I can insert any SIM card. But the problem cannot using USSD code. It take a long time, some times success but many times got error or never end loading.
I hear from my friend, if phone with Olleh provider always like that if used to another country. SK Telecom is bo probems. So I think is only about software. My be hass been disabled.
The questions is, can i flash korea version to international version (G93K to G935F). Thanks before.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No you can't.
But you can root it and instal any g935F custom rom thru TWRP.
no problem. G935F/S/K/L use same hardware and cpu.
to make it clear for future questions:
- You can't flash stock g935f to g935k, it won't work and you'll be stuck in download mode.
- You can flash custom g935f rom after root and twrp installation.
use odin and select right csc file, entering download mode , no need to root. if your phone have different cpu or a flash lock, odin will notify you an error message.
if you cannot boot after flashing, just flash your origin rom.
flash different cpu rom must use specific file and you cannot do it yourself.
some flash lock models also need special way to flash .
komanguy said:
to make it clear for future questions:
- You can't flash stock g935f to g935k, it won't work and you'll be stuck in download mode.
- You can flash custom g935f rom after root and twrp installation.
Click to expand...
Click to collapse
Hello,
But why it's not possible? I have the 930K, I'm also looking for an detail answer. Some people say it's possible, is there someone who tries?
mrz-163 said:
use odin
and select right csc file, entering download mode , no need to root. if your phone have different cpu or a flash lock, odin will notify you an error message.
if you cannot boot after flashing, just flash your origin rom.
flash different cpu rom must use specific file and you cannot do it yourself.
some flash lock models also need special way to flash .
Click to expand...
Click to collapse
So you mean if I try to flash an international rom on an Korean variante and I stay stocked, I still can flash the original rom for my phone and it will be ok?
Sent from my SM-G930K using XDA-Developers mobile app
slayer03 said:
Hello,
But why it's not possible? I have the 930K, I'm also looking for an detail answer. Some people say it's possible, is there someone who tries?
So you mean if I try to flash an international rom on an Korean variante and I stay stocked, I still can flash the original rom for my phone and it will be ok?
Click to expand...
Click to collapse
Hi i've checked that you can flash f to k, but you cannot flash k to f due to flash lock.
mrz-163 said:
Hi i've checked that you can flash f to k, but you cannot flash k to f due to flash lock.
Click to expand...
Click to collapse
Hi. Thank you for your answer. I prefer to be sure. I have a Korean sgs7, the 930K So you mean I can flash a 930F ROM on my Korean phone? But the opposite doesn't work?
Sent from my SM-G930K using XDA-Developers mobile app
slayer03 said:
Hello,
But why it's not possible? I have the 930K, I'm also looking for an detail answer. Some people say it's possible, is there someone who tries?
So you mean if I try to flash an international rom on an Korean variante and I stay stocked, I still can flash the original rom for my phone and it will be ok?
Sent from my SM-G930K using XDA-Developers mobile app
Click to expand...
Click to collapse
Hello.
I tried to flash stock g935f to g935k, It fails and phone remains stuck in download mode.
I flashed the correct stock g935K rom to resurrect the phone.
Then , I've rooted and flashed a custom g935F rom with TWRP.
komanguy said:
Hello.
I tried to flash stock g935f to g935k, It fails and phone remains stuck in download mode.
I flashed the correct stock g935K rom to resurrect the phone.
Then , I've rooted and flashed a custom g935F rom with TWRP.
Click to expand...
Click to collapse
Thanks. I'm still hesitating to root my phone. I moved to China and there is Samsung pay, but cannot use it with a Korean rom and Chinese sim card... That's why I wanted to put an international rom (and also to remove the sound when I take picture!).
Sent from my SM-G930K using XDA-Developers mobile app