Related
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
doclucas said:
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
Click to expand...
Click to collapse
Thanks buddy for helping me, got me up and running again :good:
You're welcome, mate!
Softbrick
Thank you thank you thank you thank you .
I always liked Hong Kong roms on note one and two and I thought I can continue the tradition .
Softbricked it , and no solution anywhere . I installed this and voila . Back in business . I also installed MJ7 on top now all is good .
Have I said thank you ?
Well thank you !
budalica said:
Thank you thank you thank you thank you .
Have I said thank you ?
Well thank you !
Click to expand...
Click to collapse
You're welcome. Did you press the "Thank you" button?
Thanks a lot. Without your post, my phone will still be bricked.
hh
That day! ! Me too
Useful info, I'm sure this will be of use in many situations.
Thankyou.
Sent from my GT-I9100 using Tapatalk 4
uscool said:
Thanks buddy for helping me, got me up and running again :good:
Click to expand...
Click to collapse
could someone please upload that firmware again on some other hoster? because hostfile isnt working anymore. couldnt find the file on any other server by myself.
lalahamid said:
could someone please upload that firmware again on some other hoster? because hostfile isnt working anymore. couldnt find the file on any other server by myself.
Click to expand...
Click to collapse
Here is the newer version from UK BTU: N9005XXUDMJ7_N9005OXADMJ4_BTU.zip
http://terafile.co/29f621508415
doclucas said:
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
Click to expand...
Click to collapse
my brick story in short is------ brought note 3 sm-n9005 from ebay from a Hong Kong based seller. pics of ap, cp and csc are attached. rooted with chainfire's and installed cwm6 by chenglu. A few days back, flashed bobcat rom version 2(mj7) and later 3( mk2 ) without problems. Was looking for different themes .yesterday flashed balckchrome from s4 forum that also went smooth. Unfortunatly flashed another theme for s4 which was not meant for andriod version 4.3. Pretty stupid .went into bootloop. Had nandroid backup tried to restore but couldn't.
Flashed another rom mk2 from cwm. again bootloop .took the odin route and flashed stock deodesk mj7 by Djembey from this thread.
http://forum.xda-developers.com/show....php?t=2461929
Failed again. Then downloaded latest mk2 from sammobile website. The same error (invalid ext4 img) in short failed on all ccounts. Have run out of options. The last thing in mind is to wait for some new bootloader after mk2 which might rescue me as mentioned in this thread that new bootloaders might help... Any guidance will be appreciated. Thanks
@pyarajaani
Try this:
1) Get X-Note v6 custom rom.
2) Use Odin to install CWM recovery.
3) boot the phone into CWM recovery and copy the X-NOTE rom (MK2 based) to your phone or card.
4) Do a complete wipe/factory-reset from CWM
5) Install the X-NOTE rom from CWM
And let me know how it went
doclucas said:
@pyarajaani
Try this:
1) Get X-Note v6 custom rom.
2) Use Odin to install CWM recovery.
3) boot the phone into CWM recovery and copy the X-NOTE rom (MK2 based) to your phone or card.
4) Do a complete wipe/factory-reset from CWM
5) Install the X-NOTE rom from CWM
And let me know how it went
Click to expand...
Click to collapse
Why did you suggest X-Note but not another ROM?
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always replace a ROM later on if he wishes.
doclucas said:
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always
replace a ROM later on if he wishes.
Click to expand...
Click to collapse
Thanks for the suggestion. ..tried twice with both stock n Civato kernels.. didn't go beyond Samsung logo screen....With Civato there appears some error above the logo...pics i m attaching. .Thanks again.
doclucas said:
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always replace a ROM later on if he wishes.
Click to expand...
Click to collapse
Nope, I didnt mean what is the best rom to use.
The problem is that how to bypass the bootloop issue.
pyarajaani said:
Thanks for the suggestion. ..tried twice with both stock n Civato kernels.. didn't go beyond Samsung logo screen....With Civato there appears some error above the logo...pics i m attaching. .Thanks again.
Click to expand...
Click to collapse
No need to mess with kernels.
Were u able to install cwm via odin and then boot into cwm?
doclucas said:
No need to mess with kernels.
Were u able to install cwm via odin and then boot into cwm?
Click to expand...
Click to collapse
yes...I did that n installed X note rom from cwm. BUT I suspect that cwm is not fully functional. Why I m saying this is that I have a nandroid backup of bobcat mj7 rom...which cwm isn't able to detect even. ..nevertheless. .cwm is installed.
1) Which CWM version do you have installed?
2) Did you do a full wipe/factory-reset?
3) Did you try also advanced formatting (of system partition together with the full wipe) and then install the ROM?
4) Did you try all the above with the latest TWRP recovery instead of CWM?
http://forum.xda-developers.com/showthread.php?t=2467255
Try to flash this file by cwm first and then flash any rom after you want
https://www.dropbox.com/s/bibytggk2m8npw8/Brick_Loop_FIX_Fix.zip
Sent from my SM-N9005 using Tapatalk
Hi guys desperate for help.
Did flashed German 4.4.2 official rom to my I9505.
All went well but decided to go back to stock UK rom.
Found correct firmware, started flashing with odin, got FAIL message
Now my S4 stack on Firmware upgrade encountered an issue. please select recovery mode in kies & try again
what to do next
bakili said:
Hi guys desperate for help.
Did flashed German 4.4.2 official rom to my I9505.
All went well but decided to go back to stock UK rom.
Found correct firmware, started flashing with odin, got FAIL message
Now my S4 stack on Firmware upgrade encountered an issue. please select recovery mode in kies & try again
what to do next
Click to expand...
Click to collapse
just flash the 4.4.2 firmware that you had before, i am too stuck now with 4.4.2 and cant go back to 4.3, sadly
Thanks
Phones back to life )))
So there are no way to downgrade?
Sent from my iPhone
bakili said:
Thanks
Phones back to life )))
So there are no way to downgrade?
Sent from my iPhone
Click to expand...
Click to collapse
sadly no
I am being curious.. why you dont like the 4.4.2 guys?? i am on stock UK 4.3 too, but was wondering about flashing this German 4.4.2....
4.4.2 German is fine. Just dont like build in german apps. Will wait until UK 4.4.2 will be out and flash it then.
Sent from my iPhone
Hi folks, I have recently updated my Note 3 SM-N9005 from Kitkat 4.4.2 to Lollipop using the BL, CSC, CP AND PIT Files. But I didnt like Lollipop, lots of bug like no NFC, alarm doesnt work with flip cover, gps issue, etc.. So flasked original firmware (O2 Germany) with odin 9 but no luck. After successful installation my Note 3 just stuck at Galaxy Note 3 screen. Even tried factory reset, wipe data not still stuck at the welcome screen. Is there a way to install kitkat original firmware?
You updated the bootloader so no. Just reflash the beta and wait for official update. Or you can try CM11
revert from android 5.0 to 4.4.2
Download this rom with 5 files with pit file and flash with odin, and do a wipe/factory reset before and after, then u can flash latest rom for your phone from sammobile.
http://forum.xda-developers.com/showthread.php?t=2550823&page=7
post 63
the pit file is for N9005 32GB
http://forum.xda-developers.com/galaxy-note-3/help/qa-n9005xxugbnl8-5-0-lollipop-rom-t2982320/page14
sokar_goauld said:
Download this rom with 5 files with pit file and flash with odin, and do a wipe/factory reset before and after, then u can flash latest rom for your phone from sammobile.
http://forum.xda-developers.com/showthread.php?t=2550823&page=7
post 63
the pit file is for N9005 32GB
http://forum.xda-developers.com/galaxy-note-3/help/qa-n9005xxugbnl8-5-0-lollipop-rom-t2982320/page14
Click to expand...
Click to collapse
I have tried these options but result is the same, Note 3 doesnt boot and stuck at the welcome screen. As Jack said, looks like I am stuck with lollipop beta for Note 3
sorry to hear that, when u flash the 4.4.2 back, u ticked re-partition and phone bootloader update?
sokar_goauld said:
sorry to hear that, when u flash the 4.4.2 back, u ticked re-partition and phone bootloader update?
Click to expand...
Click to collapse
Yes, I did that. Your UK firmware (UFNF4) and O2 Germany could install successfully but Note 3 wont boot. However,DBT firware couldnt install, odin gave error is initially installation process. Eventually I had to install leaked lollipop
ssn1978 said:
Yes, I did that. Your UK firmware (UFNF4) and O2 Germany could install successfully but Note 3 wont boot. However,DBT firware couldnt install, odin gave error is initially installation process. Eventually I had to install leaked lollipop
Click to expand...
Click to collapse
I think the .pit file for Lollipop makes the system partition smaller, so it's only normal that no KitKat can boot, as to why after flashing a KitKat .pit you can't boot up, I don't know. You could have booted up Lollipop without the .pit for it, you know, I didn't, and I can revert to a KitKat backup anytime without any issues.
But yeah, you might have to stay on Lollipop for a couple more weeks until we get an official update.
sirobelec said:
I think the .pit file for Lollipop makes the system partition smaller, so it's only normal that no KitKat can boot, as to why after flashing a KitKat .pit you can't boot up, I don't know. You could have booted up Lollipop without the .pit for it, you know, I didn't, and I can revert to a KitKat backup anytime without any issues.
But yeah, you might have to stay on Lollipop for a couple more weeks until we get an official update.
Click to expand...
Click to collapse
The pit file provided to revert is for 4.4.2 android .....
successfully rolled back to 4.4.2
sokar_goauld said:
The pit file provided to revert is for 4.4.2 android .....
Click to expand...
Click to collapse
Hi, is your issue resolved?
I'd like to tell that I have successfully rolled back to 4.4.2 GNG1 BTU ROM from the Leaked 5.0 ROM.
I had luckily backed up my original PIT file from 4.4.2 ROM before upgrade to Lollipop leak. As there were many bugs with the leak, i decided to restore a Nandroid backup of kitkat. But it failed miserably as all the apps started crashing. So I did a fresh flashing of 4.4.2 GNG1 BTU rom with my Backup PIT file. And now everything is working fine for me.
I have 32GB N9005 model. Let me know if you need the PIT file for the same.
It would be great if you can share the pit file with me. I desperately need to go back to 4.4.2. I too have 32 GB SM-N9005 model from O2 Germany
worked successfully for me
I had same issue when I was downgrading to 4.4.2 , but it worked for me :
1- install leaked Lollipop via pc odin ( no need pit file)
2- boot your phone up and if you see welcome screen it means you still are cool
3- download nad install 4.4.2 GNG1 via pc odin, and dont let it to boot up
4- go to stock recovery mode and wipe your phone
5- reboot your phone and hopefully you will be fine
ssn1978 said:
It would be great if you can share the pit file with me. I desperately need to go back to 4.4.2. I too have 32 GB SM-N9005 model from O2 Germany
Click to expand...
Click to collapse
On my first link i give you, u have the pit file for 4.4.2 and all the files u need to revert to 4.4.2, all u have to do is to download that rar and ur problem is solved.
So guys, I now able to downgrade to 4.4.2. As you have guys suggested, I used pit file sokar_goauld (32GB N9005) and used GNG1 BTU ROM, the way RedApple has suggested. Now everything is back to 4.4.2 though not the German O2 firmware.
Thank you guys!
I have one more question, can I now flash O2 Germany firmware on this GNG1 BTU ROM without any pit file? Seems like O2 Germany bootloader/firmware is an older version, so not sure if further downgrading to original O2 Germany firmware is possible without any issues?
Have a nice weekend.
ssn1978 said:
So guys, I now able to downgrade to 4.4.2. As you have guys suggested, I used pit file sokar_goauld (32GB N9005) and used GNG1 BTU ROM, the way RedApple has suggested. Now everything is back to 4.4.2 though not the German O2 firmware.
Thank you guys!
I have one more question, can I now flash O2 Germany firmware on this GNG1 BTU ROM without any pit file? Seems like O2 Germany bootloader/firmware is an older version, so not sure if further downgrading to original O2 Germany firmware is possible without any issues?
Have a nice weekend.
Click to expand...
Click to collapse
I am happy for u , and yes, u can flash now ur firmware without pit......u need to use pit only if u change android version, like KK to LL
LE - remember, always wipe clean/factory reset before changing firmware to avoid problems.
nagenderjeet said:
Hi, is your issue resolved?
I'd like to tell that I have successfully rolled back to 4.4.2 GNG1 BTU ROM from the Leaked 5.0 ROM.
I had luckily backed up my original PIT file from 4.4.2 ROM before upgrade to Lollipop leak. As there were many bugs with the leak, i decided to restore a Nandroid backup of kitkat. But it failed miserably as all the apps started crashing. So I did a fresh flashing of 4.4.2 GNG1 BTU rom with my Backup PIT file. And now everything is working fine for me.
I have 32GB N9005 model. Let me know if you need the PIT file for the same.
Click to expand...
Click to collapse
Worked exactly the way you suggested! Thank you.
ssn1978 said:
I have tried these options but result is the same, Note 3 doesnt boot and stuck at the welcome screen. As Jack said, looks like I am stuck with lollipop beta for Note 3
Click to expand...
Click to collapse
i think there is something wrong with flashing lollipop on your device. i already tried flashing lollipop and i downgrade it to kitkat successfully without error... many people say that its ok to downgrade from lollipop to kit kat... like me im on kitkat now because i dint like lollipop so many bugs. i will wait the official update..
That's good!
Now I'm eagerly waiting for the Official Lollipop
Thanks you Guys
I did as ssn1978 did with the suggested files from RedApple and sokar_goauld and i just wanted to say.....
Thank you guys, God bless you
I started losing hope going back to kitkat or even reviving my Note 3 back...
And now it's alive thanks to you
But i'm facing a problem now, i can't go back to my NF4 BTU, the same old problem happened again :S do i have to stuck with NG1 ? :S
Amir Adel said:
I did as ssn1978 did with the suggested files from RedApple and sokar_goauld and i just wanted to say.....
Thank you guys, God bless you
I started losing hope going back to kitkat or even reviving my Note 3 back...
And now it's alive thanks to you
But i'm facing a problem now, i can't go back to my NF4 BTU, the same old problem happened again :S do i have to stuck with NG1 ? :S
Click to expand...
Click to collapse
Downgrade from NG to NF is impossible or will cause many issues. ..so stay on NG...
rayman95 said:
Downgrade from NG to NF is impossible or will cause many issues. ..so stay on NG...
Click to expand...
Click to collapse
Oh. so It's downgrading! i thought NF4 is newer than NG1, in that case i'm satisified with NG1, device it working perfect now
Hi all,
I've recently been gifted the note 3 n900 and rooted it. I also installed TWRP and CWM as well, and when i go to install a ROM, it does say successfully and then at reboot, it shows the samsung galaxy note 3 screen, after that it goes blank. I've to do a battery pull to get it back and then restore a backup. I've tried many ROMs and also did rooting again, still nothing.
I've been using the galaxy s4 i9500 for about 2 years now and that is rooted and i've been flashing roms on it all year long with no problem. I'm just not sure what's going with this.
I'm currently on 4.4.2 official stock as I can't do much. Lollipop has not yet come to my region i think.
Any help would be widely appreciated.
Thank you in advance.
Same Issue here but I am even not getting a samsung logo or a custom rom logo.
bilicool said:
Hi all,
I've recently been gifted the note 3 n900 and rooted it. I also installed TWRP and CWM as well, and when i go to install a ROM, it does say successfully and then at reboot, it shows the samsung galaxy note 3 screen, after that it goes blank. I've to do a battery pull to get it back and then restore a backup. I've tried many ROMs and also did rooting again, still nothing.
I've been using the galaxy s4 i9500 for about 2 years now and that is rooted and i've been flashing roms on it all year long with no problem. I'm just not sure what's going with this.
I'm currently on 4.4.2 official stock as I can't do much. Lollipop has not yet come to my region i think.
Any help would be widely appreciated.
Thank you in advance.
Click to expand...
Click to collapse
Hi
I had this problem for a couple of days, I found out that I flashed a incompatible rom via Odin. Can you can go into fast boot mode and tell me what it says at the top? Mine said " Couldn't do normal boot " which means the rom I flashed was not supported for my device. I went to the Samsung website to download a rom that was compatible with my device, I flashed it via Odin and it worked.
Thanks
I Just got my error fixed. U need to flash your bootloader via odin
Faizan Farrukh said:
I Just got my error fixed. U need to flash your bootloader via odin
Click to expand...
Click to collapse
Yup thanks buddy. Fixed.
Faizan Farrukh said:
Same Issue here but I am even not getting a samsung logo or a custom rom logo.
Click to expand...
Click to collapse
AADAMHITMAN said:
Hi
I had this problem for a couple of days, I found out that I flashed a incompatible rom via Odin. Can you can go into fast boot mode and tell me what it says at the top? Mine said " Couldn't do normal boot " which means the rom I flashed was not supported for my device. I went to the Samsung website to download a rom that was compatible with my device, I flashed it via Odin and it worked.
Thanks
Click to expand...
Click to collapse
I found that flashing the Stock Lollipop Rom worked, just as mentioned above by the above post. Yes, just by updating the bootloader i think it works. I've done it by getting the Russian stock rom from sammobile (even though i'm not in Russia), works like a charm. Really love the new feel to the note 3 n900. Just need to find a way to get permissive kernel now and ites perfect.
Hi.
My 928f is not working so good.
Ive tried many firmwares but the battery is not working great. I now want to try to make a 10000% clean flash.
The battery was allready swapped.
Best way would be
A complete Nougat with Nougat Bootloader and Nougat pit File. Hope someone can give me a link ?
A really need a complete Nougat package with everything for a complete 100% clean flash !!
Thanks and sorry for my bad english :-/
if you dont mind i say this in here, but PIXEL rom V4 haves great battery life.
Had the same problem on stock rom, batterydrain. Pixel rom solved it for me.
basically if you flash stock frimware from odin, it is a clean flash when you have factory reset ticked. correct me if im wrong.
Ok.
Is every odin firmware with bootloader ?
First i want to bring to to a clean new stock
??
odd29 said:
Ok.
Is every odin firmware with bootloader ?
First i want to bring to to a clean new stock
Click to expand...
Click to collapse
Samsung Official Odin Flashable Frimwares usually come with bootloader too.
Thank you so much.
Will try it tomorrow.. where is this option you mentioned ?? factory reset