I have a weird problem getting fastboot to work on my Nexus 10.
Whenever I connect my Nexus 10 in fastboot mode to my pc it installs two drivers: Samsung Mobile USB Modem and SAMSUNG Mobile USB CDC Composite Device.
When I try to update the driver it won't allow me to pick a driver from Google and it does not work if I use the metod with a driver file and assigning the location.
I already tried a toolkit for installing the drivers but that did not work either..
Hello mrgnex,
please use this Driver's:
koush/UniversalAdbDriver ยท GitHub
Related
I have a Nexus 7 that used to be able to be seen (and trnasfer files) on my Win 7 64-bit Ultimate pc. It is not visible in Explorer now- think it happened after upgrade to 4.2.2
I have tried various ways and means from this site and others but still unsuccessful. My pc kept wanting to install MTP USB drivers everytime I plug the N7 into it even when I have it set as PTP; and the drivers always failed.
I downloaded the Universal naked Drivers and tried to install it as well but problem is that my device only show up as MTP USB (under portable devices) instead of as N7; and under that the drivers is always the failed MTP USB drivers. I cannot browse to install Universal Drivers here cos the pc will not accept it.
Really running out of my wits. Any advises please?
Thanks.
I had initial problems connecting to my pc after installing all the drivers from a toolkit. After searching, I followed a tip and installed pdanet on my phone and pdanet for android on my pc. Now I connect exactly like my phone or other storage with full access to the user storage on the n7 from the pc. Win 7 pro 64bit.
I'm having trouble getting the proper usb drivers loaded so i can root my new Nexus 7. I downloaded the Android SDK, unzipped and expanded the google drivers, but my Vista computer keeps giving me an error like "windows found driver software for your device but encountered an error while attempting to install it". It shows the driver as Android Composite ADB Interface. Please help!!
You need to disable your computer's driver signature enforcement.
1)by the way - delete your device from Laptop`s device manager and unplug and plug again cable to you Nexus
2)download last version of ADB and Fastboot
3)check at storage menu - preference - camera (not mtp)
4)enter in developer item in settings menu and check USB debug - Android `ll show your alert message with mac adress of you Laptop - you must accept it
!!! Do not try to use some other sofware for rooting (this is bad idea)- you must doing it in fastboot by myself!!!
I'm trying to install Samsung mobile phone drivers but no matter what I do I miss these drivers when I connect my Samsung Galaxy Y:
CDC Abstract Control Model (ACM)
CDC ACM Data
CDC OBEX Data
CDC Object Exchange (OBEX)
I have googled for solution and I have followed recommended actions (install Kies, install latest drivers, reinstall all, use "have disk" method) on different operating systems (Windows XP, Windows 7) but I got no success.
My phone doesn't boot (I need to flash it with Odin) so I have tried it all in recovery or download mode but I understand it should not really matter as it's Windows issue, not a phone. I'm using original Samsung USB cable.
Could somebody with a working setup could check if they have above devices correctly installed and provide me more information on the driver file? I mean the information from driver details tab in Windows, ie. name of *.SYS file, *.INF file so I could at least check if I have a driver on a disk.
Any other suggestions also welcomed!
Kies is useless & is not required for galaxy y gt-s5360 as it's not supported for firmware flashing on this device so uninstall it
Uninstall any Samsung drivers you have installed from add/remove programmes
Goto my firmware thread at top of Dev section or link in signature
Download & install USB drivers on my thread
Download the firmware from my thread depending on region
Follow the instructions fully
You can manually install drivers if you wish by clicking on unknown device/device with yellow! click have disk & navigate to where you installed Samsung drivers eg c:/programme files/Samsung
It has finally worked (Windows XP)! I have just installed drivers and followed your instructions (with download mode, not recovery mode). Initially I had other unrecognized devices (very generic usb ones) but after a few attempts (usb plug out, usb plug in) the phone has been detected successfully and I managed to flash it. Many thanks!
Sorry, I forgot to mention. I had also removed a battery.
I have the same issue, Could you please paste the links for downloading the drivers.
I cannot get ADB to recognize my Note 7. I've installed the ADB & FastBoot 15-second install from the XDA forum, but when I plug my N7 into the PC it only recognizes it as a USB drive.
Dev options enabled,
USB Debugging enabled
USB configuration (MTP mode)
The only entries under Other in Device Manager are CDC and MTP, no Android Device. The phone is also listed under Portable Devices. No USB mode brings up "Android" in the list of devices under Other.
Does anyone have any suggestions?
Do you have proper Samsung usb drivers installed? Check your device manager, just asking sometimes phones can be finicky when trying to get the PC to recognize devices.
Thanks carelockh! That did the trick. I looked in Device Manager and found that only the Windows USB device driver was installed. I downloaded and installed the Samsung driver and was able to connect over ADB.
No problem, anytime glad I could help.
Hi
I am a new user for nexus 6p, For the first time I connected my device to Computer running windows 10 updated. My laptop didn't detect the usb and the driver is not installed properly, I tried downloading the latest usb driver but it didnt help , While searching for the driver folder it throws
Windows was unable to install your unkown drive
You can get the USB drivers straight from Google and try to uninstall/reinstall or download Wugfresh's NRT. There is very good driver installation tool and test to confirm you get both USB and fastboot drivers installed properly. Just follow the "Full Driver Installation Guide"
Tonyjaqs92 said:
Hi
I am a new user for nexus 6p, For the first time I connected my device to Computer running windows 10 updated. My laptop didn't detect the usb and the driver is not installed properly, I tried downloading the latest usb driver but it didnt help , While searching for the driver folder it throws
Windows was unable to install your unkown drive
Click to expand...
Click to collapse
Hi... Do you have ADB enabled in developer options? If you don't have developer options enabled, go in: settings>about phone and type 7 times on the build number, then go back in settings > developer options and enable "android debugging".
Plug your N6 on your computer, check your phone screen and allow press ok when it asks to "allow USB debugging".
Does it change something? Is your N6 recognized in device manager? Does the driver updates?
...
So My puter recognizes my phone fine....
Pop opened the configuration and General tab says:
This device is not configured correctly. (Code 1)
A service installation section in this INF is invalid.
To find a driver for this device, click Update Driver.
I try and update the driver using the "Let the puter search" feature and it finds one and tells me:
Windows encountered a problem installing the driver software for your device.
Windows found driver software for your device but encountered an error while attempting to install it.
MPE Device
A service installation section in this INF is invalid.
If you know the manufacturer of your device, you can visit its website and check the support section for driver software.
This is all AFTER I downloaded the latest Google USB drivers and unzipped them.
Phone is set to MTP mode and debugging mode is unlocked and usb debugging is on.
No Go.