Does anyone have the link to the full ROM that includes this update please? I'm on TWRP and so cannot flash OTA (I also don't have access to a computer at the moment to flash stock recovery)
Thanks,
You can also reflash full 2.0.1 rom then immediately flash the 8MB OTA file. This works.
Then if you use Xposed, boot, go to recovery again and you can reflash Xposed (then clean dalvik/cache again is recommended I suppose).
Everything OK following these steps for me (stable official Xposed for LL 5.1 realeased today ).
http://forum.xda-developers.com/showpost.php?p=62618113&postcount=25
Here's a stock ROM thread over on the OP forums, seems to be the one to keep an eye on
https://forums.oneplus.net/threads/oneplus-2-stock-rom-collection-updated-01-09.347627/
Related
Hi, i am OnePlus2 64gb version with Oxygen 3.1.0. fully rooted, with custom recovery and so many xposed mods. Now that the oxygen 3.5.6 update hit my device i am a bit confused if i should just go ahead and tab the update for the system to just download and install or i possibly needs to un-root, revert back to stock recovery before doing any update,
And if i will have to un-root and revert everything, please how do i go about it?
Thanks.
Download and install de full zip update
https://www.androidfilehost.com/?fid=457095661767126038
If you are ROOT you need:
1 Wipes and flash the Full ROM
2 install supersu, wipes and reboot
3 start config, reboot in recovery
4 install Xposed v87
It was the process I did and no problems
In order to install it just install Opera VPN, set it to Canada and boom. Here you go!
Hi all,
We are starting the incremental roll-out of OxygenOS 4.0.2 for the OnePlus 3T.
Here are the highlights:
Upgraded to Android 7.0 Nougat
New Notifications Design
New Settings Menu Design
Multi-Window View
Notification Direct Reply
Custom DPI Support
Added Status Bar Icon Options
Improved Shelf Customization
Updated APN Settings for select Carriers
Fixed Proximity Sensor bug during calls
Fixed Google Play Store download bug
Increased System Stability
***Known Issues and Fixes
WiFi connectivity might still fluctuate, if you experience this issue, please send me a pm.
LINK : https://forums.oneplus.net/threads/oxygenos-4-0-2-n-ota-for-oneplus-3t.489596/
In order to install it just install Opera VPN, set it to Canada and boom. Here you go!
i download and share link to google drive now.
Got the OTA in Canada. No issues to report.
Link for downloading the zip
Kudos to the uploader
https://drive.google.com/file/d/0B9BnJVUDKCskLTJBcWhaWF9PLUk/view
Did they release kernel sources with it :c
Hello guys,
Please help.. I am on 3.5.4 and rooted and installed latest twrp, can i upgrade to nougat without any problem and witout loosing data ? I have unlocked bootloader and rooted the phone.
Thanks
Isus <3 said:
Did they release kernel sources with it :c
Click to expand...
Click to collapse
Ofcourse not
Even Samsung uploaded the Nougat kernel sources WTF??!?!?!
[QUOTE=Isus No.
nice, after ota i hang in twrp and also after reflashing 4.0.1 full rom amd supersu 2.79 SR2 twrp tells me "no os installed" and boots every time into twrp instead of system. never seen this before, any help?
paratox said:
nice, after ota i hang in twrp and also after reflashing 4.0.1 full rom amd supersu 2.79 SR2 twrp tells me "no os installed" and boots every time into twrp instead of system. never seen this before, any help?
Click to expand...
Click to collapse
Flash stock recovery.
so does anyone have a changelog other than the one OnePlus have provided, seeing as it's the same as 4.0.0 & 4.0.1
https://drive.google.com/open?id=0B47Lm7PlGNiva00ydkdtb2owTGs
full rom 402 for 3T
MrOnizuka said:
Hello guys,
Please help.. I am on 3.5.4 and rooted and installed latest twrp, can i upgrade to nougat without any problem and witout loosing data ? I have unlocked bootloader and rooted the phone.
Thanks
Click to expand...
Click to collapse
are you on twrp 3.0.3-1? make sure you update twrp to the latest version first before you do anything
step 1: go to the "how to Install OxygenOS 4.0.1 with Stock Or Custom Recovery without Data Loss!!" thread and download the newest supersu zip file and the FULL 4.0.1 zip file (larger file)
step 2: boot to recovery and nandroid backup
step 3: go to wipe, advanced, wipe cache and dalvik
step 4: go to install and flash the full OOS 4.0.1 zip file then directly after flash the newest supersu 2.79 zip file
step 5: boot to system should take a bit longer than usual then you will be in nougat
hope this helps
spireweb said:
are you on twrp 3.0.3-1? make sure you update twrp to the latest version first before you do anything
step 1: go to the "how to Install OxygenOS 4.0.1 with Stock Or Custom Recovery without Data Loss!!" thread and download the newest supersu zip file and the FULL 4.0.1 zip file (larger file)
step 2: boot to recovery and nandroid backup
step 3: go to wipe, advanced, wipe cache and dalvik
step 4: go to install and flash the full OOS 4.0.1 zip file then directly after flash the newest supersu 2.79 zip file
step 5: boot to system should take a bit longer than usual then you will be in nougat
hope this helps
Click to expand...
Click to collapse
Hello,
Thanks, i am on twrp 3.0.3-1 latest !
But to update to 4.0.2 ?
Moderator Information,
Thread closed, please use existing threads before creating new ones, EG: [ROM][OFFICIAL][4.0.2] OOS 4.0.2 Nougat for OP3T !!!
I recently upgraded from 2.38. I flashed the 2.41 firmware via download mode/SD card method. The firmware option I chose had the newest (unofficial) version of TWRP included. Immediately following, I booted into the newly installed TWRP and formatted data. I also performed a full wipe, and installed santoD's new stock version of 2.41 with aroma. I have tried both versions in aroma (Magisk and Chainfire SU)...and do not show root with either! Can someone please explain what is going on here? I don't understand why I lost root with a clean flash.
Thanks
mikenjen0524 said:
I recently upgraded from 2.38. I flashed the 2.41 firmware via download mode/SD card method. The firmware option I chose had the newest (unofficial) version of TWRP included. Immediately following, I booted into the newly installed TWRP and formatted data. I also performed a full wipe, and installed santoD's new stock version of 2.41 with aroma. I have tried both versions in aroma (Magisk and Chainfire SU)...and do not show root with either! Can someone please explain what is going on here? I don't understand why I lost root with a clean flash.
Thanks
Click to expand...
Click to collapse
Just go grab the latest flashable zip for either one and flash in recovery...
Sent from my HTC6545LVW using Tapatalk
Hey, so I wanted to install a custom ROM (LineageOS 14.1) anyway, I found this site that was showing me how to but first i needed to unlock bootloader and install TWRP, i clicked on the steps for that and it brought me here:
https://devsjournal.com/how-to-root...to_unlock_Bootloader_of_Motorola_Moto_G4_Plus
I followed all the steps on that page, even installing the SuperSU, but this is where the problem began. After rebooting from installing SuperSU i was stuck on a black screen (not even backlight) and a white blinking LED light next to the fingerprint scanner. I began to look around for a fix and i found this site:
https://forum.xda-developers.com/2015-moto-g/help/problem-boot-flashing-supersu-t3507127
I followed the steps but nothing worked. Then i tried this:
https://forum.xda-developers.com/moto-g4/help/troubleshooting-twrp-boot-loop-ota-t3714325
but that still didn't work. Flashing a new ROM does not fix the problem, and it seems nothing will. I am able to get into the bootloader and I am also still able to get into TWRP but i can't boot into ROM. I need help.
I should have attached this before but here is a picture of the bootloader. After typing in all those command the only thing that changed was the yellow text that says Software status: Modified
1) What ROM are you trying to flash onto your device?
2)The issue here appears to be that you've rooted on the stock ROM - what those pages don't mention is that those steps only work for Marshmallow stock ROMs - attempting to root on the stock Motorola Nougat ROM may cause you to bootloop and you need a custom kernel to root on stock Nougat ROMs. One way around this may be to flash a custom kernel such as ElementalX 2.0.1 https://forum.xda-developers.com/moto-g4-plus/development/kernel-elementalx-g4-0-01-t3424836 then attempt to boot. You can boot to TWRP, connect your device to your computer, which should show up as internal storage. There, you should be able to copy a download of the custom kernel to your device and flash through TWRP. If you made a backup before rooting, you could re-flash just the boot (kernel) partition to restore a clean stock kernel then attempt to flash the custom kernel and then root.
3)You could alternatively boot to TWRP and flash Lineage. You do not need root at all to flash custom ROMs - just an unlocked bootloader. Root for installing custom ROMs is unnecessary. Be aware to flash the Lineage build matching your TWRP (i.e. 32 bit Lineage if you're running the official TWRP or any other 32 bit TWRP recovery for athene, 64 bit Lineage only is flashable with the 64 bit TWRP, else you'll get an error 255 on flashing). As always, flashing a new custom ROM requires a /system, /data and /cache wipe at least - possibly an internal storage wipe, so back up to your computer or the cloud as necessary.
4)As for the modified status, that may have been from rooting on the stock kernel. That can disappear if you were to flash a stock OTA onto your device, but that would mean flashing the NPJ25.93-14.7 Sept 2017 security patch stock ROM (latest leak we have for XT1644 devices as far as I recall), and then taking OTA updates up to April 2018 which may be risky.
echo92 said:
1) What ROM are you trying to flash onto your device?
2)The issue here appears to be that you've rooted on the stock ROM - what those pages don't mention is that those steps only work for Marshmallow stock ROMs - attempting to root on the stock Motorola Nougat ROM may cause you to bootloop and you need a custom kernel to root on stock Nougat ROMs. One way around this may be to flash a custom kernel such as ElementalX 2.0.1 https://forum.xda-developers.com/moto-g4-plus/development/kernel-elementalx-g4-0-01-t3424836 then attempt to boot. You can boot to TWRP, connect your device to your computer, which should show up as internal storage. There, you should be able to copy a download of the custom kernel to your device and flash through TWRP. If you made a backup before rooting, you could re-flash just the boot (kernel) partition to restore a clean stock kernel then attempt to flash the custom kernel and then root.
3)You could alternatively boot to TWRP and flash Lineage. You do not need root at all to flash custom ROMs - just an unlocked bootloader. Root for installing custom ROMs is unnecessary. Be aware to flash the Lineage build matching your TWRP (i.e. 32 bit Lineage if you're running the official TWRP or any other 32 bit TWRP recovery for athene, 64 bit Lineage only is flashable with the 64 bit TWRP, else you'll get an error 255 on flashing). As always, flashing a new custom ROM requires a /system, /data and /cache wipe at least - possibly an internal storage wipe, so back up to your computer or the cloud as necessary.
4)As for the modified status, that may have been from rooting on the stock kernel. That can disappear if you were to flash a stock OTA onto your device, but that would mean flashing the NPJ25.93-14.7 Sept 2017 security patch stock ROM (latest leak we have for XT1644 devices as far as I recall), and then taking OTA updates up to April 2018 which may be risky.
Click to expand...
Click to collapse
Yea i should have been more clear on what ROM i was trying to flash, i wanted to flash LineageOS but when i try to flash it and boot i still get the same problem, the led light just blinks over and over until i unplug the phone or go into the bootloader. Maybe i have the wrong version of something? All i know is that the phone was working perfectly fine before and it is the XT1644 model. It had all its updates up to date but i just wanted to install LineageOS, i do now realize that you don't need root to flash a custom ROM but also i don't know where to find files for the kernel you are talking about, I also did not make a backup (lets just say im pretty stupid and i know i should have). If you have any info or need any more to further assist me, let me know. Thank you for responding!
So i tried flashing the custom kernel and it looked like everything was working, but the phone still won't boot, it just flashes the LED light, also i reinstalled LineageOS after wiping all the cache and internal storage and stuff but it still hasn't worked.
Hey, i got good news, i was able to get the phone to boot by downloading and following these steps here: https://forum.xda-developers.com/mo...e-npj25-93-t3549369/post70843323#post70843323
The phone now is working and i will attempt to install LineageOS once more. Thank you for you help!
Hi,
I'm going to use pixel experience rom.
I know that i should update firmware (and maybe vendor) manually.
If i download the stock zip from here: https://en.miui.com/download-360.html#582
and i install it with twrp, it will update the firmware and vendor?
I know the rom will not start because of twrp, but i just install it then install the costum rom back.
I don't want to use firmware update zips, i know it is exist and maybe more painless, but it don't have vendor and modem and so on.
This method will work for me to install stock zip then install costum rom again?
Hi there, user OragngeFox, there is an stable version now, will give u more options and stuff, and yes you gotta download full rom ZIP and flash it prior flashing any custom rom, also remember to flash Vbmeta.img, after flashing full rom and before flash new custom rom