Related
Okay so i'm in an area where T-mobile only has edge coverage and I'm hating my life right now without 3G, but AT&T has 3G coverage here, so why won't it let me roam on to the faster network? I can pull it up under network services but it just won't let me actually roam on to the network. Is this an issue of the phone simply not having the VPN's and such? Cuz if T-mobile won't charge me for roaming I damn well wanna use it! I'm using Cyanogen's Mod and the Hero 1.3.5 theme. All I want for my birthday is 3G!!!
They use different frequency's for the 3G signal.. thats why unlocked G1's can't use att 3g even if they have a AT&T sim
Hmm... seems strange the G1 would still be able to see the network being that it's using a different signal. Is there any way around this? Cuz they just stationed me in Quantico, VA for the rest of the summer and I'm ready to shoot myself on this Edge crap! And sadly 2 months is just too short of a time to actually get internet installed lol
hum.. I doubt it will help any but thier are som VPN settings floating around the board here that haykuro made. most ROMS come with it, I doubt it'll help though.
if that doesn't help take 2 Motrin and drink plenty of water. /end navy joke
Haha, yeah I'm a corpsman, we're working down here at the Marine Corps officer candidate school, so my mantra has been "Take Motrin, hydrate, and change your socks." These past couple weeks. Yet they somehow still mess those things up lol.
USNCorpsman said:
Okay so i'm in an area where T-mobile only has edge coverage and I'm hating my life right now without 3G, but AT&T has 3G coverage here, so why won't it let me roam on to the faster network? I can pull it up under network services but it just won't let me actually roam on to the network. Is this an issue of the phone simply not having the VPN's and such? Cuz if T-mobile won't charge me for roaming I damn well wanna use it! I'm using Cyanogen's Mod and the Hero 1.3.5 theme. All I want for my birthday is 3G!!!
Click to expand...
Click to collapse
Im sorry to say but you cant use 3G on AT&T. Tmobile didnt want to wait for any bands in the 1700mhz or 1900mhz band to become available, so there 3G runs in the 2100/1700mhz band and that is the only band the G1 can use to get 3G. You can see AT&T service but that is voice, not 3G. AT&T 3G runs over the 1700/1900mhz band. here is a artical about this.
http://www.businessweek.com/the_thread/techbeat/archives/2008/10/unlocked_androi.html
stupid t-mobile ruined my summer!
wrong part of the forum to complain about your t-mobile signal.
mods needs to move this.
USNCorpsman said:
stupid t-mobile ruined my summer!
Click to expand...
Click to collapse
well at least you have edge and wifi. better then no signal at all
johnnylicious said:
wrong part of the forum to complain about your t-mobile signal.
mods needs to move this.
Click to expand...
Click to collapse
Wasn't complaining just wondering if there was a tech reason it wasn't working with these builds and if there was a way around it
thread moved
please post in the correct thread please
thank you
You must be barely outside of their coverage area. The map shows 3g coverage on both sides of where you are. The schedule that is floating around says they are supposed to expand coverage to Chesapeake, Hampton, Norfolk, Portsmouth, Richmond, and Virginia Beach this summer so you might get lucky and get it before you leave.
Quantico's huge, T-Mobile has no 3G service there, and WiFi is out as NMCI doesn't permit wireless APs.
You're stuck with EDGE on T-Mobile, or EDGE on AT&T if you roam, but you won't get a speed increase if you use it, just a roaming charge. The problem is the frequency, as others have mentioned. AT&T uses 850/1900 where as T-Mobile uses 1700/2100. There's no known way (yet *crosses fingers) to use a T-Mobile G1 with AT&T's 3G service, so sadly, you're going to be stuck for 2 months out there with what you have.
I have my Dream working on AT&T's 3G service, and it works quite well, but it's not a G1. I specifically bought a Rogers Canadian HTC Dream (which is band-compatible with AT&T) for this purpose. So if you're *that* desperate for 3G service, you could spring for a Rogers Dream or Magic phone, but they aren't cheap. Additionally, they don't run custom ROMs yet (we just got root on the Rogers Dream this morning, and the Rogers Magic was only last week). So... There is no perfect solution for you yet if you want 3G and root. I've been living on my ADP1 with EDGE for 5 months now, and it isn't *that* bad, I guess.
On the more "bleeding edge" frontier, there's speculation that if one were to flash the Rogers dream radio to the T-Mobile G1, that it would do 3G on AT&T instead of T-Mo, but nobody's been able to get it done yet. A few people say it's the same chipset, it'll work, a few others say it won't, but till somebody tries it, we'll never know for sure. Either way, it's not currently possible as we don't have a Rogers Dream radio image.
So, there's your options I'm afraid. And something else to consider - even though AT&T says they have 3G, check with somebody else who has their service to see if they're actually getting it first. Quantico is a huge base, and there's no cell towers on it to my knowledge. So it's possible that nobody is getting 3G signal there, on either network.
Has anyone else had an issue with having the phone drop out of 3G coverage, and not want to reconnect by itself?
It seems to me as if when there is no 3G coverage it falls back onto GPRS and doesnt check if 3G is available.
I've set it to WCDMA (3G) only mode just to get on 3G, but it sucks cause I have no fallback and am out out of coverage often enough to take some advantage of GPRS.
Also 3G signal seems pretty weak compared to my HTC Magic in same locations...
Any ideas?
Might be something about your area, I haven't lost 3G once since I got my phone.
Once I put it on 3G only mode it seems to be alright but the odd building I wont have anything cause I have no GPRS to go to unless I manually switch it back and forth.
Maybe I'll call up rogers tech support and see if theres any known issues, but usually Im more informed then they are. :S
I have had this problem, for the first week or so the 3G was rock solid and i was getting pretty good speeds. Then things started playing up and Orange in the UK told me to switch to GSM only, data speeds sucked big time, timescape would fail to update etc etc. So i called up and they are sending a replacement handset out.
The 3G coverage where i live and work is excellent according to the Orange website, so there shouldn't be any issues there.
I could not put up with the slower internet speeds, so i hope it was just a duff handset.
i drove across the US and i had 3g where there were 3g and it was on edge where there weren't any 3g. it went back to 3g once i reached 3g area.
my setting is on gsm/wcdma preferred.
i dunno why yours isn't going back up to 3g in a strong 3g area ??
which carrier are you with?
Rogers in Canada
i would check with your carrier and see a map of coverage. did you get the phone from them?
the only other way is to repair the phone. but losing 3G in a 3G covered area is the first i've heard from the X10. i've heard that the NEXUS ONE has somewhat of the same issue....
Well I know the coverage is there because when the phone is set to WCDMA (3G) only mode, I will have coverage. But when it is set to dual mode, as soon as it drops to GSM it seems like it doesn't even bother checking or reverting back to 3G, even though I am back in 3G coverage.
i'd probably talk to the carrier about it and troubleshoot it. maybe you can see if the phone is defective or not by doing that. and hopefully get a new device.
arcticreaver said:
i'd probably talk to the carrier about it and troubleshoot it. maybe you can see if the phone is defective or not by doing that. and hopefully get a new device.
Click to expand...
Click to collapse
lol troubleshooting with rogers is like putting a sawed off 12 guage in your mouth and pulling the trigger...
wow rogers service is that bad?
yup sadly. I have dealt with all the majors in North america (even worked for att) and rogers is THE WORST.
"power concedes nothing without a demand. it never did. it never will."
They have been the premier carrier in canada for many years, only recently has telus been catching up. So now they're changing... but they still hire idiots for tech support.
Case in point, instead of giving me apn settings they said my x1 was defective. Found the apn settings and x1 worked perfectly.
Ive had pretty good luck with rogers so far, and I've worked for all the big carriers.
I think with tech support its really hit and miss but id have to say bell is probably the worst for issues, account and phone related...
IMO ...
-------------------------------------
Sent via the XDA Tapatalk App
Funny you said that, I just was toying with my X10 (running on AT&T in Bay area, bought from Rogers Wireless) and its doing the same. Once it goes to Edge, doesnt bother to check for the 3G.. hmmmm.... let me play a bit more.. if i find something .. i will update !!
I lost 3G while in a tunnel today, lots my radio stream and it went Edge, once I was back in the clear it recovered properly.
The program Power Manager, has a 2G / 3G toggle on it, maybe you can use that to force switch it back if its not auto switching.
Ya that would probably work, I'll try it out. Thanks
I was just hoping for fix rather than a work around, lol :S
midnight79 said:
Funny you said that, I just was toying with my X10 (running on AT&T in Bay area, bought from Rogers Wireless) and its doing the same. Once it goes to Edge, doesnt bother to check for the 3G.. hmmmm.... let me play a bit more.. if i find something .. i will update !!
Click to expand...
Click to collapse
my rogers on us atnt switches back to 3g. is it because the 3g signal where you are is weak so it just stays on the stronger edge signal ?
cause i swear i drove from somewhere with 3g though many many parts without 3g and now i have 3g again. strange.....
I can go to a location where i know there is full 3G coverage (by switching to 3G only mode) but it wont switch back after being dropped (down to EDGE in low coverage) but it doesn't want go back to 3G by itself for whatever reason?
dan.expo said:
I can go to a location where i know there is full 3G coverage (by switching to 3G only mode) but it wont switch back after being dropped (down to EDGE in low coverage) but it doesn't want go back to 3G by itself for whatever reason?
Click to expand...
Click to collapse
HSPA+ Upgrades going on in Red Deer/Lacombe
Just got 2 s4's and signal strength lower in house than my htc one s
i checked default bands and set to lte/gsm
changed to lte/gsm/cdma preferred and better dl speeds
is there a best setting
i obviously need to do more testing in other locations, just curious
It all depends on where you are and what equipment is on the towers you happen to be around at any given time. Also, like you just found out, some devices will get better reception than others. It's just something that you have to play around with on your own to see what works best for you.
I'm with Sprint, which in my area completely SUCKS. I hate Sprint and am seriously considering paying the etf to switch to AT&T (which in my area gets LTE almost everywhere). What I'm getting at is when I'm around my home I turn 4G off. When I get a couple of miles out I'll turn it back on if I need to, then when getting around our downtown area when going to work I'll turn it back off.
well i put it back to default. will recheck coverage maps. tmo was bad here too, in valley. but, i think they were improving cells getting ready for lte here. that was when my signal got better. before that it was bad also.
really need to check work and the real bad areas I had were tmo's coverage was real bad even on map.
Where is this setting? I'm getting no signal indoors unlike my previous phone which got near-full signal. Weird thing is that I kind of remember getting a better signal when I first got the phone. Seems to have gotten worse.
yeahmann said:
Where is this setting? I'm getting no signal indoors unlike my previous phone which got near-full signal. Weird thing is that I kind of remember getting a better signal when I first got the phone. Seems to have gotten worse.
Click to expand...
Click to collapse
*#*#4636#*#*
Tao on Device Info
scroll down to Set Preferred Network
let us know what works best for you
rugmankc said:
Just got 2 s4's and signal strength lower in house than my htc one s
i checked default bands and set to lte/gsm
changed to lte/gsm/cdma preferred and better dl speeds
is there a best setting
i obviously need to do more testing in other locations, just curious
Click to expand...
Click to collapse
Setting it to that is NOT improving anything...... do you even know what CDMA is? This phone does not have any CDMA bands.... CDMA is what sprint, Verizon, and us cellular run on setting it yk that won't improve anything...
Sent from my SGH-M919 using xda premium
hyelton said:
Setting it to that is NOT improving anything...... do you even know what CDMA is? This phone does not have any CDMA bands.... CDMA is what sprint, Verizon, and us cellular run on setting it yk that won't improve anything...
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
Yes, I know what cdma is and who has it--
Just saying when changing bands it improved quite a bit, could be many reasons. Also, I am comparing signal strength in same spot with tmo and att. Two different carriers. I am sure they can have different readings in same area. So, until I test the areas were I really need the better coverage and att map says it should be there in those areas, I won't know if it the radio or not. The only reason I swithched was to get better coverage in my business appt areas. Where I live and am currently testing att shows solid 4g.
Actually today no real difference, I seem to do a little better at first. But, it is defaulting back to lte/gsm. So, will just give it some time and see how other areas do. Was just curious if anyone had tried other bands. I may do great where I need it.
Thanks,
Mod can close this thread--
I actually have to force WCDMA only in one area constantly get between no service and service if I don't.
hyelton said:
I actually have to force WCDMA only in one area constantly get between no service and service if I don't.
Click to expand...
Click to collapse
Yeah, it can make a diff. But, shouldn't have to do it. I will report how i do in other areas of Dayton over the next few days. Haven't left house today. Yard work.
I hope as lte rolls out here, things will improve like tmo did.
Doesn't make a difference. I have to swap phones or something. Signal is so weak, it's unusable. Most of the time I'm getting no signal at all. I haven't had full bars yet anywhere!
That doesn't sound good. Today I went to store we shop at about 20 miles away in Springboro. I could not make calls from inside with tmo. Also, could not with att. It was just a tad better toward front of store. Tried a couple other highway locations and speedtests were always lower than tmo. Son's phone the same. This week I will appts north and see how it compares. I can't believe att is not outperforming tmo here. I know one day is no test. But, their maps show much wider coverage than tmo.
I will call them and have them reconnect me. Also, check apn's. Can't find a good apn list yet. But, also can't edit them. When I go to check networks, it just says default setting and doesn't list att or anyone. Never saw that before.
I think it is what it is since both phones run the same on the network--
Hurry up lte
Educate me if I am wrong. But, my slower than tmo speeds may be due to lack of 21mb network on att in Dayton.
tmo had that here, i don't think att does EDIT: Acording to sales rep we do--just never see it on phone--more research needed
i only get hspa 11 or 15. assume that is 11mb and 15mb
so, until i get lte am stuck with these speeds, which are 3g, NOT 4g att
Actually, looking at map and reading their Legend, I should get HSPA+ here. Haven't seen it. It is not listed on gsmarena phone specs
May try a different sim and not sure what my exact apn's should be here. Anyone have them?
Any Dayton S4 users here???
I have read a lot already on this site about my issue just wanted to clear up a few unanswered questions.
I am looking to switch from Verizon to t-mobile because of prices and terrible reception where I'm living in Riverside Ca. So I know that I can simply put in a t-mobile sim and change to the correct gsm settings and get cell reception (correct me if I'm wrong) but what about getting LTE from t-mobile? I have looked to see if the new 700 mhz band covers here and Ventura County Ca. (where I am when I'm not in Riverside) and it does so I should get LTE without having to put in a custom Rom, correct?
I'm a novice when coming to roms (plus a failed attempt) so i would like to avoid them as much as I can. Will do it if I have to though... All about saving $$$$
Thanks for the replies.
@mjmjpfaff
I know what your saying about saving $$$ phones these days are almost the half of a old car/price of a motorcycle.
If your Verizon phone is not simlocked and also has support for the LTE bands which T-Mobile is using then it's possible to get LTE working without the need to buy another phone. If it's mentioned on internet on multiple sites that the G2 supports that LTE band then you can get it without a custom rom.
In my eyes it's possible to have working LTE from T-Mobile on your verizon phone, but to be 100% sure I would contact Verizon support about your question.
I also had many fail attempts with custom roms first but after you get how it works, you can flash anything as smooth as butter:good:
you could also wait for a VS980 G2 user who had the same issue as you but I think that it would take you more time awaiting for a reaction from somebody since not many people are browsing the Q&A section.
wulsic said:
@mjmjpfaff
I know what your saying about saving $$$ phones these days are almost the half of a old car/price of a motorcycle.
If your Verizon phone is not simlocked and also has support for the LTE bands which T-Mobile is using then it's possible to get LTE working without the need to buy another phone. If it's mentioned on internet on multiple sites that the G2 supports that LTE band then you can get it without a custom rom.
In my eyes it's possible to have working LTE from T-Mobile on your verizon phone, but to be 100% sure I would contact Verizon support about your question.
I also had many fail attempts with custom roms first but after you get how it works, you can flash anything as smooth as butter:good:
you could also wait for a VS980 G2 user who had the same issue as you but I think that it would take you more time awaiting for a reaction from somebody since not many people are browsing the Q&A section.
Click to expand...
Click to collapse
I found this on another thread:
"I just switched from a Verizon Galaxy Note 2 to the G2 since all I can get from it with t-mobile is H+ speeds (about 4mbs-6mbs). I inserted the t-mobile sim into the verizon g2 and it automatically switched to global mode and I then went in to edit the apn settings to fast.t-mobile.com. 4G LTE is working just fine on stock rom kitkat update (I'm in L.A. suburb). Speeds range from 15mbs to 30mbs+ depending on where I am in the city. Here are some screenshots"
This guy is pretty much in my area and sounds like he did not do anything other switch in a t-mobile sim...
( http://forum.xda-developers.com/showthread.php?t=2609607&page=4 --> first post on that page)
I will DM him to get some more insight.
Thanks for your reply.
I'm using my droid mini on tmobile and am getting LTE speeds. You should see them if you're in an area where the network was refarmed to 1900mhz
Keep in mind the fastest speeds you will see is 21Mbps unless you swap for the Tmobile Verizon which goes up to 42Mbps and higher.
tiguy99 said:
I'm using my droid mini on tmobile and am getting LTE speeds. You should see them if you're in an area where the network was refarmed to 1900mhz
Keep in mind the fastest speeds you will see is 21Mbps unless you swap for the Tmobile Verizon which goes up to 42Mbps and higher.
Click to expand...
Click to collapse
What area or state are you in if you don't mind me a asking?
Chicago area
Hi I too am using t-mobile on a VS980 and with CM11 and Cloudyg3, I am able to get LTE through their automated APN settings!
I recently switched from my old iPhone 4s to the galaxy s5 on the rogers network and I'm experience cing major issues. My iPhone never had an issue anywhere in my house or area with reception, but the s5 is not the same story. First time I brought it home I couldn't make a call and if I somehow managed to it was so spotty and often dropped my calls. I know that the s5 will search for the lte network, where the iPhone ran on 4G, and since there is no lte network in my area I was advised to switch my settings to connect to the 4G network. And.......... no change! I'm not very tech savy and I'm hoping I can learn a great deal with the switch, but It is a phone after all and I need that to work lol.
Help me please.