Related
Hey guys, I need your help. I'm unable to unlock bootloader. I downloaded everything I need, I got my unlock number from huawei site etc. When I run adb it detects my phone, I write down adb reboot bootloader, it switches my phone into that white screen where it says LOCKED. Then I run this command - fastboot oem unlock (my unlock number from huawei site) and it replies with- Waiting for any device and nothing happens. Phone is still locked, I cannot write more commands and even if I wait for some period of time, nothing changes and I am forced to reboot without unlocking
Do you guys have any suggestions?
PS: another problem...probably week and half ago my wifi stopped working..it detects different wifi routers, but I am unable to connect and if I connect, the internet is not working. I've read on other forums it could be hw issue. I've also tried every possible step to solve this problem but flashing new ROM, since I haven't been succesful with unlocking bootloader.
Thanks.
sainG said:
Hey guys, I need your help. I'm unable to unlock bootloader. I downloaded everything I need, I got my unlock number from huawei site etc. When I run adb it detects my phone, I write down adb reboot bootloader, it switches my phone into that white screen where it says LOCKED. Then I run this command - fastboot oem unlock (my unlock number from huawei site) and it replies with- Waiting for any device and nothing happens. Phone is still locked, I cannot write more commands and even if I wait for some period of time, nothing changes and I am forced to reboot without unlocking
Do you guys have any suggestions?
PS: another problem...probably week and half ago my wifi stopped working..it detects different wifi routers, but I am unable to connect and if I connect, the internet is not working. I've read on other forums it could be hw issue. I've also tried every possible step to solve this problem but flashing new ROM, since I haven't been succesful with unlocking bootloader.
Thanks.
Click to expand...
Click to collapse
In fastboot(white screen with Android logo saying locked) type fastboot devices.
If it displays YOUR phone serial no of your phone then everything is fine. If no serial number appears then your phone isn't connected to minimal adb. Also it can be a driver/cable issue.
Recently I have owned lenovo zuk 1
Then I try to unlock bootloader and root my device and get successful in this process and try some custom ROM's to make my handset with more interesting features ( thanx for the those developers who develop such ROM's , hat's to you guys) but after some weeks I try CM 14.1 , I messup with that process and got bricked device then I try to reflash that ROM , I have completed all processes very patiently , again and again I was ported to recovery ,not able to access my device. I became fed up with this then I leave my phone on customer care , after some days I get my zuk 1 with stock firmware
Now the main problem arises
Again I try to unlock my device
I have already install the adb and fastboot drivers and that working fine
I tried , adb devices
Its working
Then I try ,adb reboot bootloader
Its also working
But when I try , the script for unlocking bootloader
I get , { waiting for device }
Idk what's this happening
Lenovo USB drivers are property installed on my PC
Adb and fastboot drivers are also installed properly but I don't know ,what i am doing wrong
I think customer care ppls forcefully locked my bootloader that I can't able to root my handset in future
If anyone here to solve this issue ,ASAP
racker16 said:
Click to expand...
Click to collapse
Which commands you using for bootloader unlock?
strongst said:
Which commands you using for bootloader unlock?
Click to expand...
Click to collapse
fastboot -i 0x2b4c oem unlock- go
I was using right command
racker16 said:
fastboot -i 0x2b4c oem unlock- go
I was using right command
Click to expand...
Click to collapse
Without the space between oem and go?
fastboot -i 0x2b4c oem unlock-go
strongst said:
Without the space between oem and go?
fastboot -i 0x2b4c oem unlock-go
Click to expand...
Click to collapse
Yeah I have used this also but same ,
Waiting for device
racker16 said:
Recently I have owned lenovo zuk 1
Then I try to unlock bootloader and root my device and get successful in this process and try some custom ROM's to make my handset with more interesting features ( thanx for the those developers who develop such ROM's , hat's to you guys) but after some weeks I try CM 14.1 , I messup with that process and got bricked device then I try to reflash that ROM , I have completed all processes very patiently , again and again I was ported to recovery ,not able to access my device. I became fed up with this then I leave my phone on customer care , after some days I get my zuk 1 with stock firmware
Now the main problem arises
Again I try to unlock my device
I have already install the adb and fastboot drivers and that working fine
I tried , adb devices
Its working
Then I try ,adb reboot bootloader
Its also working
But when I try , the script for unlocking bootloader
I get , { waiting for device }
Idk what's this happening
Lenovo USB drivers are property installed on my PC
Adb and fastboot drivers are also installed properly but I don't know ,what i am doing wrong
I think customer care ppls forcefully locked my bootloader that I can't able to root my handset in future
If anyone here to solve this issue ,ASAP
Click to expand...
Click to collapse
in developer options (in settings) make sure both oem and usb debug are ON
CoreKido said:
in developer options (in settings) make sure both oem and usb debug are ON
Click to expand...
Click to collapse
Its already on that time
racker16 said:
Recently I have owned lenovo zuk 1
Then I try to unlock bootloader and root my device and get successful in this process and try some custom ROM's to make my handset with more interesting features ( thanx for the those developers who develop such ROM's , hat's to you guys) but after some weeks I try CM 14.1 , I messup with that process and got bricked device then I try to reflash that ROM , I have completed all processes very patiently , again and again I was ported to recovery ,not able to access my device. I became fed up with this then I leave my phone on customer care , after some days I get my zuk 1 with stock firmware
Now the main problem arises
Again I try to unlock my device
I have already install the adb and fastboot drivers and that working fine
I tried , adb devices
Its working
Then I try ,adb reboot bootloader
Its also working
But when I try , the script for unlocking bootloader
I get , { waiting for device }
Idk what's this happening
Lenovo USB drivers are property installed on my PC
Adb and fastboot drivers are also installed properly but I don't know ,what i am doing wrong
I think customer care ppls forcefully locked my bootloader that I can't able to root my handset in future
If anyone here to solve this issue ,ASAP
Click to expand...
Click to collapse
Buddy try this tool
http://forum.xda-developers.com/zuk-z1/orig-development/tool-toolzukz1eng0-0-3-mauronofrio-t3332563
Hi, I have a moto x style pure and it is on a bootloop. I have tried to send the fastboot codes for reset (erase userdata, erase cache) but keeps rebooting. So I tried to reinstall the complete system, but there is no software avaliable for the nphs 25.200.23 version I could only find the 25.200.22 version. If somebody could help me I would really appreciate.
Pdta: I could not enable oem unlock before the bootloop so I can´t reinstall a lower version of the software because of the locked bootloader. If somebody knows a way to unlock the bootloader (I have already did the test on the motorola web page but when I put the unlock code on fastboot it asks me to enable oem ulock via software) Sorry for my english is not my mother tongue.
Thanks in advance
vladimir1909 said:
Hi, I have a moto x style pure and it is on a bootloop. I have tried to send the fastboot codes for reset (erase userdata, erase cache) but keeps rebooting. So I tried to reinstall the complete system, but there is no software avaliable for the nphs 25.200.23 version I could only find the 25.200.22 version. If somebody could help me I would really appreciate.
Pdta: I could not enable oem unlock before the bootloop so I can´t reinstall a lower version of the software because of the locked bootloader. If somebody knows a way to unlock the bootloader (I have already did the test on the motorola web page but when I put the unlock code on fastboot it asks me to enable oem ulock via software) Sorry for my english is not my mother tongue.
Thanks in advance
Click to expand...
Click to collapse
As you wrote - with locked BL you can do... nothing.
Only You can wipe all in recovery mode - u can find "how to" with google.
Yeah I'm curious how come you didn't do a recovery in fast boot mode? I don't think you muffed any during a flash when your boot loader is locked.
dzidexx said:
As you wrote - with locked BL you can do... nothing.
Only You can wipe all in recovery mode - u can find "how to" with google.
Click to expand...
Click to collapse
The problem is that even wiping everything in recovery or via fastboot, the phone is still on a bootloop. So, thats why I am asking for help, or maybe somebody has the ota in a zip format or a full flash.
StankFiss said:
Yeah I'm curious how come you didn't do a recovery in fast boot mode? I don't think you muffed any during a flash when your boot loader is locked.
Click to expand...
Click to collapse
I tried to, and when it is done, keeps rebooting
You are locked... there is NOTHING we can do at this point other than a factory reset in recovery, if that fails to get the device booting and you cannot get it unlocked again (unlikely since OEM Unlocking gets turned off again when you re-lock), then the device is probably bricked.
I am a little curious how you got to this state... the only way you could have relocked the bootloader was on 200.22, so it must have booted then in order to take .23 OTA update... or what exactly happened? I doubt it would make a difference to help you, but the information might help others from bricking.
acejavelin said:
You are locked... there is NOTHING we can do at this point other than a factory reset in recovery, if that fails to get the device booting and you cannot get it unlocked again (unlikely since OEM Unlocking gets turned off again when you re-lock), then the device is probably bricked.
I am a little curious how you got to this state... the only way you could have relocked the bootloader was on 200.22, so it must have booted then in order to take .23 OTA update... or what exactly happened? I doubt it would make a difference to help you, but the information might help others from bricking.
Click to expand...
Click to collapse
Sure I can tell you my history.
My sister came with this phone she bought on the web. The problem was the data cable. It was faulty. And the battery was at 2%.
While I was looking for usb cable, the phone went off. So I did not thought in another thing just than let it charge for a while. After let it charge for 30 minutes, I tried to turn it on and it was only rebooting. So a said to myself: "Lets send fastboot commands for erasing userdata and cache, and then she can put her google account and using it" I have reset a lot of motorola phone before with this same method. After rebooting, the phone kept rebooting. Then I said: " Ok lets full flash the phone" But when I was searching for the firmware I could not find the same or higher version of the phone. There is only 25.200.22 on every website I have visited. And I cant unlock the bootloader because nobody actived the oem unlock when it was booting properly.
This is basically how my nightmares started. I was talking with some technitians and they say they need to replace the mainboard because when they try to flash it fails, of course cause they have an older version, and it is a hardware issue.
vladimir1909 said:
Hi, I have a moto x style pure and it is on a bootloop. I have tried to send the fastboot codes for reset (erase userdata, erase cache) but keeps rebooting. So I tried to reinstall the complete system, but there is no software avaliable for the nphs 25.200.23 version I could only find the 25.200.22 version. If somebody could help me I would really appreciate.
Click to expand...
Click to collapse
https://forum.xda-developers.com/moto-x-style/general/official-firmware-moto-x-purestyle-t3737472
I got this moto g4 play a few months ago. I decided to finally install this security update because I decided that nothing will go wrong. I clicked install and went to eat. When I came back the screen was block and no buttons worked. I figured out that I needed to blank flash this bootloader. After 2 hours of trying it worked. I got into the bootloader. The thing is that the bootloader came locked and I cannot access my recovery or android. To unlock the bootloader I need to check the "allow oem unlock" in developper settings on android. BUT I DO NOT HAVE ANDROID. Now I'm stuck. Can anyone please help! Thanks.
(By the way it is XT1601)
Log:
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Failed to initialize partition table
CID Read Failure
Invalid CID status 0x69
USB connected
Uio443 said:
I got this moto g4 play a few months ago. I decided to finally install this security update because I decided that nothing will go wrong. I clicked install and went to eat. When I came back the screen was block and no buttons worked. I figured out that I needed to blank flash this bootloader. After 2 hours of trying it worked. I got into the bootloader. The thing is that the bootloader came locked and I cannot access my recovery or android. To unlock the bootloader I need to check the "allow oem unlock" in developper settings on android. BUT I DO NOT HAVE ANDROID. Now I'm stuck. Can anyone please help! Thanks.
(By the way it is XT1601)
Log:
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Failed to initialize partition table
CID Read Failure
Invalid CID status 0x69
USB connected
Click to expand...
Click to collapse
Hi, I have exactly the same problem. Have you resolved it ? Ty
Uio443 said:
I got this moto g4 play a few months ago. I decided to finally install this security update because I decided that nothing will go wrong. I clicked install and went to eat. When I came back the screen was block and no buttons worked. I figured out that I needed to blank flash this bootloader. After 2 hours of trying it worked. I got into the bootloader. The thing is that the bootloader came locked and I cannot access my recovery or android. To unlock the bootloader I need to check the "allow oem unlock" in developper settings on android. BUT I DO NOT HAVE ANDROID. Now I'm stuck. Can anyone please help! Thanks.
(By the way it is XT1601)
Log:
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Failed to initialize partition table
CID Read Failure
Invalid CID status 0x69
USB connected
Click to expand...
Click to collapse
Did u try to request a bootloader unlock key at Moto's Website and try unlocking?
I know its sounds a bit stupid but sometimes it works. One of my friend said he did it so just give it a try!
TheWarrior01 said:
Did u try to request a bootloader unlock key at Moto's Website and try unlocking?
I know its sounds a bit stupid but sometimes it works. One of my friend said he did it so just give it a try!
Click to expand...
Click to collapse
Thanks for the response but here is what happens. When I try to get the key I need to run this command:
Code:
fastboot oem get_unlock_dat
I should get a bunch of numbers and letters and numbers in response which I then send to motorola which motorola analyzes and gives me the unlock key. But when I run this command I get this error:
Code:
C:\Minimal ADB and Fastboot>fastboot oem get_unlock_data
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
...
(bootloader) Failed to get unlock data, please try again!
FAILED (remote failure)
finished. total time: 0.120s
I am glad that you are trying to help but sadly it is not that simple.
TsiaoTai said:
Hi, I have exactly the same problem. Have you resolved it ? Ty
Click to expand...
Click to collapse
I have a suspision I need to somehow remove the bootloader and reinstall an unlocked one. That is my latest guess. But so far I haven't been able to fix it.
Uio443 said:
I have a suspision I need to somehow remove the bootloader and reinstall an unlocked one. That is my latest guess. But so far I haven't been able to fix it.
Click to expand...
Click to collapse
Good luck with that. If remediation were that simple device security would be a joke.
Given the oem unlock data responses you posted I'd say your device is toast. Hope I am wrong.
Davey126 said:
Good luck with that. If remediation were that simple device security would be a joke.
Given the oem unlock data responses you posted I'd say your device is toast. Hope I am wrong.
Click to expand...
Click to collapse
I hope so too.
Try Using a Different Cord. Also just for confirmation, You have Moto drivers Installed? Try using different PC + ADB.
Also see this thread and post your Info: https://forums.lenovo.com/t5/MOTOROLA-Android-Developer/Bootloader-Unlock-Problems/m-p/3222809 .
If that doesnt work, take it to service center and tell after update it happened. (Dont Mention you trying to blank flash) Also, Before hand, Tweet to Official moto and moto(country) specific page. Tell them your device aint working after update. They wil tell you mail them(most of the times) and then mail them. Wait for 1 Day for reply and then go to service Center.
Uio443 said:
I got this moto g4 play a few months ago. I decided to finally install this security update because I decided that nothing will go wrong. I clicked install and went to eat. When I came back the screen was block and no buttons worked. I figured out that I needed to blank flash this bootloader. After 2 hours of trying it worked. I got into the bootloader. The thing is that the bootloader came locked and I cannot access my recovery or android. To unlock the bootloader I need to check the "allow oem unlock" in developper settings on android. BUT I DO NOT HAVE ANDROID. Now I'm stuck. Can anyone please help! Thanks.
(By the way it is XT1601)
Log:
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Failed to initialize partition table
CID Read Failure
Invalid CID status 0x69
USB connected
Click to expand...
Click to collapse
Hi, I don't know if you solve your problem but I have the same and I thought about using an edl cable : https://www.amazon.com/cable-Qualcomm-phones-Flash-called/dp/B01NAMYW84 to go in edl mode and then flash the ROM with QFIL. Could be worth ?
Another question; is your phone is recognized by RSD Lite ? If yes, have you tried to flash stock ROM via RSD ?
TsiaoTai said:
Hi, I don't know if you solve your problem but I have the same and I thought about using an edl cable : https://www.amazon.com/cable-Qualcomm-phones-Flash-called/dp/B01NAMYW84 to go in edl mode and then flash the ROM with QFIL. Could be worth ?
Another question; is your phone is recognized by RSD Lite ? If yes, have you tried to flash stock ROM via RSD ?
Click to expand...
Click to collapse
The cable may be worth trying. I will so thanks for telling me. I have tried a few versions of RSD Lite but my phone is not recognized.
Is yours recognized by RSD Lite?
Uio443 said:
The cable may be worth trying. I will so thanks for telling me. I have tried a few versions of RSD Lite but my phone is not recognized.
Is yours recognized by RSD Lite?
Click to expand...
Click to collapse
Nope, mine not recognized either and I tried different versions of RSD on different supports ( Windows xp, 7, 10 and Linux )
I'll buy the cable tommorow, I'll tell you
Otherwise i try to find my Bootloader unlock code to re-unlock it but no trace of this code on my PC...
By the way, in order to Blank flash your bootloader, which file did you used ? I think the BlankFlash files we used were not adapted to our phone model
TsiaoTai said:
Nope, mine not recognized either and I tried different versions of RSD on different supports ( Windows xp, 7, 10 and Linux )
I'll buy the cable tommorow, I'll tell you
Otherwise i try to find my Bootloader unlock code to re-unlock it but no trace of this code on my PC...
By the way, in order to Blank flash your bootloader, which file did you used ? I think the BlankFlash files we used were not adapted to our phone model
Click to expand...
Click to collapse
Hello,
Did you get the cable, and if so then did anything work for you?
I have ordered the cable but it will take a very long time to ship (estimated oct9-dec4).
In other words, did anything work for you?
Uio443 said:
Hello,
Did you get the cable, and if so then did anything work for you?
I have ordered the cable but it will take a very long time to ship (estimated oct9-dec4).
In other words, did anything work for you?
Click to expand...
Click to collapse
Sorry, totally forgt the topic The cable didn't work for me, I hope you will get better results.
I'm done spending hours searching answers on google, I gave up
Good luck !
TsiaoTai said:
Sorry, totally forgt the topic The cable didn't work for me, I hope you will get better results.
I'm done spending hours searching answers on google, I gave up
Good luck !
Click to expand...
Click to collapse
Damn, that really sucks. I will let you know if I am able to fix it as soon as I get the cable.
Uio443 said:
I got this moto g4 play a few months ago. I decided to finally install this security update because I decided that nothing will go wrong. I clicked install and went to eat. When I came back the screen was block and no buttons worked. I figured out that I needed to blank flash this bootloader. After 2 hours of trying it worked. I got into the bootloader. The thing is that the bootloader came locked and I cannot access my recovery or android. To unlock the bootloader I need to check the "allow oem unlock" in developper settings on android. BUT I DO NOT HAVE ANDROID. Now I'm stuck. Can anyone please help! Thanks.
(By the way it is XT1601)
Log:
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Failed to initialize partition table
CID Read Failure
Invalid CID status 0x69
USB connected
Click to expand...
Click to collapse
Flash from fastboot gpt.bin and the rest oficina firmware stock for your phone, try whith Is info
https://forum.xda-developers.com/g4-play/how-to/guide-return-to-stock-firmware-recovery-t3551797
Uio443 said:
I got this moto g4 play a few months ago. I decided to finally install this security update because I decided that nothing will go wrong. I clicked install and went to eat. When I came back the screen was block and no buttons worked. I figured out that I needed to blank flash this bootloader. After 2 hours of trying it worked. I got into the bootloader. The thing is that the bootloader came locked and I cannot access my recovery or android. To unlock the bootloader I need to check the "allow oem unlock" in developper settings on android. BUT I DO NOT HAVE ANDROID. Now I'm stuck. Can anyone please help! Thanks.
(By the way it is XT1601)
Log:
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Failed to initialize partition table
CID Read Failure
Invalid CID status 0x69
USB connected
Click to expand...
Click to collapse
Take it to your service center
Hi, I need help with my evice, I used a script founded in a thread here to flash stock rom 8.0 oreo, but that locked the bootloader now I cant unlock it because when phone starts im stuck on oreo wizard with no wifi or data to acces oem unlock in developer settings, is there any way to skyp this wizar or to flash with locked bootloader, wherever i tried to flash another frimware i have the error mesage, Bootloader "Permission Denied".
Thanks in advance!
sorry bad spelling, is not my native lenguage.
You can skip the wizard with just giving it ok everywhere and it will eventually end
For the unlocking here's a tool to share internet from pc to your phone
https://github.com/Genymobile/gnirehtet
juampapo546 said:
You can skip the wizard with just giving it ok everywhere and it will eventually end
For the unlocking here's a tool to share internet from pc to your phone
Click to expand...
Click to collapse
Can't pass the wizard cuase it ask for internet and I can't use that tool cause it need debug to work wich I can't activate without passing the wizar, is there another way?
Thanks!
coredeing said:
Can't pass the wizard cuase it ask for internet and I can't use that tool cause it need debug to work wich I can't activate without passing the wizar, is there another way?
Thanks!
Click to expand...
Click to collapse
Did you try to unlock the bootloader via fastboot?
WoKoschekk said:
Did you try to unlock the bootloader via fastboot?
Click to expand...
Click to collapse
Yes but it says that I need to turn oem unlock on the developer options since I cannot pass the wizard I cant tur the option on. =c
Coredesing said:
Hi, I need help with my evice, I used a script founded in a thread here to flash stock rom 8.0 oreo, but that locked the bootloader now I cant unlock it because when phone starts im stuck on oreo wizard with no wifi or data to acces oem unlock in developer settings, is there any way to skyp this wizar or to flash with locked bootloader, wherever i tried to flash another frimware i have the error mesage, Bootloader "Permission Denied".
Thanks in advance!
sorry bad spelling, is not my native lenguage.
Click to expand...
Click to collapse
Even if you get past the wizard, you still wouldn't be able to re-unlock the bootloader. It would stay gray forever. The only solution now is to get your phone hard bricked so you can enter edl mode and re-unlock it. You need either a deep flash cable, or short the 2 connection JTAG points from the motherboard. I'm on the same boat, but never got to do this to confirm if it works.
mrsiri said:
Even if you get past the wizard, you still wouldn't be able to re-unlock the bootloader. It would stay gray forever. The only solution now is to get your phone hard bricked so you can enter edl mode and re-unlock it. You need either a deep flash cable, or short the 2 connection JTAG points from the motherboard. I'm on the same boat, but never got to do this to confirm if it works.
Click to expand...
Click to collapse
NO, you can pass the wizard with no internet connection, I did it several times on my evert, just keep saying yes to everything (unless you frp locked which would be weird since is not by default enabled) Once you pass the wizard use the tool I provided previously to unlock bl