Hi, I need help with my evice, I used a script founded in a thread here to flash stock rom 8.0 oreo, but that locked the bootloader now I cant unlock it because when phone starts im stuck on oreo wizard with no wifi or data to acces oem unlock in developer settings, is there any way to skyp this wizar or to flash with locked bootloader, wherever i tried to flash another frimware i have the error mesage, Bootloader "Permission Denied".
Thanks in advance!
sorry bad spelling, is not my native lenguage.
You can skip the wizard with just giving it ok everywhere and it will eventually end
For the unlocking here's a tool to share internet from pc to your phone
https://github.com/Genymobile/gnirehtet
juampapo546 said:
You can skip the wizard with just giving it ok everywhere and it will eventually end
For the unlocking here's a tool to share internet from pc to your phone
Click to expand...
Click to collapse
Can't pass the wizard cuase it ask for internet and I can't use that tool cause it need debug to work wich I can't activate without passing the wizar, is there another way?
Thanks!
coredeing said:
Can't pass the wizard cuase it ask for internet and I can't use that tool cause it need debug to work wich I can't activate without passing the wizar, is there another way?
Thanks!
Click to expand...
Click to collapse
Did you try to unlock the bootloader via fastboot?
WoKoschekk said:
Did you try to unlock the bootloader via fastboot?
Click to expand...
Click to collapse
Yes but it says that I need to turn oem unlock on the developer options since I cannot pass the wizard I cant tur the option on. =c
Coredesing said:
Hi, I need help with my evice, I used a script founded in a thread here to flash stock rom 8.0 oreo, but that locked the bootloader now I cant unlock it because when phone starts im stuck on oreo wizard with no wifi or data to acces oem unlock in developer settings, is there any way to skyp this wizar or to flash with locked bootloader, wherever i tried to flash another frimware i have the error mesage, Bootloader "Permission Denied".
Thanks in advance!
sorry bad spelling, is not my native lenguage.
Click to expand...
Click to collapse
Even if you get past the wizard, you still wouldn't be able to re-unlock the bootloader. It would stay gray forever. The only solution now is to get your phone hard bricked so you can enter edl mode and re-unlock it. You need either a deep flash cable, or short the 2 connection JTAG points from the motherboard. I'm on the same boat, but never got to do this to confirm if it works.
mrsiri said:
Even if you get past the wizard, you still wouldn't be able to re-unlock the bootloader. It would stay gray forever. The only solution now is to get your phone hard bricked so you can enter edl mode and re-unlock it. You need either a deep flash cable, or short the 2 connection JTAG points from the motherboard. I'm on the same boat, but never got to do this to confirm if it works.
Click to expand...
Click to collapse
NO, you can pass the wizard with no internet connection, I did it several times on my evert, just keep saying yes to everything (unless you frp locked which would be weird since is not by default enabled) Once you pass the wizard use the tool I provided previously to unlock bl
Related
Hi, I have a moto x style pure and it is on a bootloop. I have tried to send the fastboot codes for reset (erase userdata, erase cache) but keeps rebooting. So I tried to reinstall the complete system, but there is no software avaliable for the nphs 25.200.23 version I could only find the 25.200.22 version. If somebody could help me I would really appreciate.
Pdta: I could not enable oem unlock before the bootloop so I can´t reinstall a lower version of the software because of the locked bootloader. If somebody knows a way to unlock the bootloader (I have already did the test on the motorola web page but when I put the unlock code on fastboot it asks me to enable oem ulock via software) Sorry for my english is not my mother tongue.
Thanks in advance
vladimir1909 said:
Hi, I have a moto x style pure and it is on a bootloop. I have tried to send the fastboot codes for reset (erase userdata, erase cache) but keeps rebooting. So I tried to reinstall the complete system, but there is no software avaliable for the nphs 25.200.23 version I could only find the 25.200.22 version. If somebody could help me I would really appreciate.
Pdta: I could not enable oem unlock before the bootloop so I can´t reinstall a lower version of the software because of the locked bootloader. If somebody knows a way to unlock the bootloader (I have already did the test on the motorola web page but when I put the unlock code on fastboot it asks me to enable oem ulock via software) Sorry for my english is not my mother tongue.
Thanks in advance
Click to expand...
Click to collapse
As you wrote - with locked BL you can do... nothing.
Only You can wipe all in recovery mode - u can find "how to" with google.
Yeah I'm curious how come you didn't do a recovery in fast boot mode? I don't think you muffed any during a flash when your boot loader is locked.
dzidexx said:
As you wrote - with locked BL you can do... nothing.
Only You can wipe all in recovery mode - u can find "how to" with google.
Click to expand...
Click to collapse
The problem is that even wiping everything in recovery or via fastboot, the phone is still on a bootloop. So, thats why I am asking for help, or maybe somebody has the ota in a zip format or a full flash.
StankFiss said:
Yeah I'm curious how come you didn't do a recovery in fast boot mode? I don't think you muffed any during a flash when your boot loader is locked.
Click to expand...
Click to collapse
I tried to, and when it is done, keeps rebooting
You are locked... there is NOTHING we can do at this point other than a factory reset in recovery, if that fails to get the device booting and you cannot get it unlocked again (unlikely since OEM Unlocking gets turned off again when you re-lock), then the device is probably bricked.
I am a little curious how you got to this state... the only way you could have relocked the bootloader was on 200.22, so it must have booted then in order to take .23 OTA update... or what exactly happened? I doubt it would make a difference to help you, but the information might help others from bricking.
acejavelin said:
You are locked... there is NOTHING we can do at this point other than a factory reset in recovery, if that fails to get the device booting and you cannot get it unlocked again (unlikely since OEM Unlocking gets turned off again when you re-lock), then the device is probably bricked.
I am a little curious how you got to this state... the only way you could have relocked the bootloader was on 200.22, so it must have booted then in order to take .23 OTA update... or what exactly happened? I doubt it would make a difference to help you, but the information might help others from bricking.
Click to expand...
Click to collapse
Sure I can tell you my history.
My sister came with this phone she bought on the web. The problem was the data cable. It was faulty. And the battery was at 2%.
While I was looking for usb cable, the phone went off. So I did not thought in another thing just than let it charge for a while. After let it charge for 30 minutes, I tried to turn it on and it was only rebooting. So a said to myself: "Lets send fastboot commands for erasing userdata and cache, and then she can put her google account and using it" I have reset a lot of motorola phone before with this same method. After rebooting, the phone kept rebooting. Then I said: " Ok lets full flash the phone" But when I was searching for the firmware I could not find the same or higher version of the phone. There is only 25.200.22 on every website I have visited. And I cant unlock the bootloader because nobody actived the oem unlock when it was booting properly.
This is basically how my nightmares started. I was talking with some technitians and they say they need to replace the mainboard because when they try to flash it fails, of course cause they have an older version, and it is a hardware issue.
vladimir1909 said:
Hi, I have a moto x style pure and it is on a bootloop. I have tried to send the fastboot codes for reset (erase userdata, erase cache) but keeps rebooting. So I tried to reinstall the complete system, but there is no software avaliable for the nphs 25.200.23 version I could only find the 25.200.22 version. If somebody could help me I would really appreciate.
Click to expand...
Click to collapse
https://forum.xda-developers.com/moto-x-style/general/official-firmware-moto-x-purestyle-t3737472
Hi.. may i asking u guys that u guys have try to unlock bootloader at ver.318 firmware? cause i unable to unlock my phone bootloader at this latest firmware..does anyone has same issue with me?
What issues are you facing? Unlock method works perfectly.
arvinchugh said:
What issues are you facing? Unlock method works perfectly.
Click to expand...
Click to collapse
i have follow the instruction that to unlock my phone but when i want to unlock my phone bootloader it sometimes show tat code 0kb and wont move anymore...sometimes it until stuck at waiting devices and the phone only show click power to shutdown.. .and sometimes already process all the process in cmd but the phone still at bootloader mode and wont restart..
i have try uninstall and reinstall my driver in my pc still the same.. my operating system is using windows 8.1 and windows 7
I got this moto g4 play a few months ago. I decided to finally install this security update because I decided that nothing will go wrong. I clicked install and went to eat. When I came back the screen was block and no buttons worked. I figured out that I needed to blank flash this bootloader. After 2 hours of trying it worked. I got into the bootloader. The thing is that the bootloader came locked and I cannot access my recovery or android. To unlock the bootloader I need to check the "allow oem unlock" in developper settings on android. BUT I DO NOT HAVE ANDROID. Now I'm stuck. Can anyone please help! Thanks.
(By the way it is XT1601)
Log:
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Failed to initialize partition table
CID Read Failure
Invalid CID status 0x69
USB connected
Uio443 said:
I got this moto g4 play a few months ago. I decided to finally install this security update because I decided that nothing will go wrong. I clicked install and went to eat. When I came back the screen was block and no buttons worked. I figured out that I needed to blank flash this bootloader. After 2 hours of trying it worked. I got into the bootloader. The thing is that the bootloader came locked and I cannot access my recovery or android. To unlock the bootloader I need to check the "allow oem unlock" in developper settings on android. BUT I DO NOT HAVE ANDROID. Now I'm stuck. Can anyone please help! Thanks.
(By the way it is XT1601)
Log:
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Failed to initialize partition table
CID Read Failure
Invalid CID status 0x69
USB connected
Click to expand...
Click to collapse
Hi, I have exactly the same problem. Have you resolved it ? Ty
Uio443 said:
I got this moto g4 play a few months ago. I decided to finally install this security update because I decided that nothing will go wrong. I clicked install and went to eat. When I came back the screen was block and no buttons worked. I figured out that I needed to blank flash this bootloader. After 2 hours of trying it worked. I got into the bootloader. The thing is that the bootloader came locked and I cannot access my recovery or android. To unlock the bootloader I need to check the "allow oem unlock" in developper settings on android. BUT I DO NOT HAVE ANDROID. Now I'm stuck. Can anyone please help! Thanks.
(By the way it is XT1601)
Log:
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Failed to initialize partition table
CID Read Failure
Invalid CID status 0x69
USB connected
Click to expand...
Click to collapse
Did u try to request a bootloader unlock key at Moto's Website and try unlocking?
I know its sounds a bit stupid but sometimes it works. One of my friend said he did it so just give it a try!
TheWarrior01 said:
Did u try to request a bootloader unlock key at Moto's Website and try unlocking?
I know its sounds a bit stupid but sometimes it works. One of my friend said he did it so just give it a try!
Click to expand...
Click to collapse
Thanks for the response but here is what happens. When I try to get the key I need to run this command:
Code:
fastboot oem get_unlock_dat
I should get a bunch of numbers and letters and numbers in response which I then send to motorola which motorola analyzes and gives me the unlock key. But when I run this command I get this error:
Code:
C:\Minimal ADB and Fastboot>fastboot oem get_unlock_data
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
...
(bootloader) Failed to get unlock data, please try again!
FAILED (remote failure)
finished. total time: 0.120s
I am glad that you are trying to help but sadly it is not that simple.
TsiaoTai said:
Hi, I have exactly the same problem. Have you resolved it ? Ty
Click to expand...
Click to collapse
I have a suspision I need to somehow remove the bootloader and reinstall an unlocked one. That is my latest guess. But so far I haven't been able to fix it.
Uio443 said:
I have a suspision I need to somehow remove the bootloader and reinstall an unlocked one. That is my latest guess. But so far I haven't been able to fix it.
Click to expand...
Click to collapse
Good luck with that. If remediation were that simple device security would be a joke.
Given the oem unlock data responses you posted I'd say your device is toast. Hope I am wrong.
Davey126 said:
Good luck with that. If remediation were that simple device security would be a joke.
Given the oem unlock data responses you posted I'd say your device is toast. Hope I am wrong.
Click to expand...
Click to collapse
I hope so too.
Try Using a Different Cord. Also just for confirmation, You have Moto drivers Installed? Try using different PC + ADB.
Also see this thread and post your Info: https://forums.lenovo.com/t5/MOTOROLA-Android-Developer/Bootloader-Unlock-Problems/m-p/3222809 .
If that doesnt work, take it to service center and tell after update it happened. (Dont Mention you trying to blank flash) Also, Before hand, Tweet to Official moto and moto(country) specific page. Tell them your device aint working after update. They wil tell you mail them(most of the times) and then mail them. Wait for 1 Day for reply and then go to service Center.
Uio443 said:
I got this moto g4 play a few months ago. I decided to finally install this security update because I decided that nothing will go wrong. I clicked install and went to eat. When I came back the screen was block and no buttons worked. I figured out that I needed to blank flash this bootloader. After 2 hours of trying it worked. I got into the bootloader. The thing is that the bootloader came locked and I cannot access my recovery or android. To unlock the bootloader I need to check the "allow oem unlock" in developper settings on android. BUT I DO NOT HAVE ANDROID. Now I'm stuck. Can anyone please help! Thanks.
(By the way it is XT1601)
Log:
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Failed to initialize partition table
CID Read Failure
Invalid CID status 0x69
USB connected
Click to expand...
Click to collapse
Hi, I don't know if you solve your problem but I have the same and I thought about using an edl cable : https://www.amazon.com/cable-Qualcomm-phones-Flash-called/dp/B01NAMYW84 to go in edl mode and then flash the ROM with QFIL. Could be worth ?
Another question; is your phone is recognized by RSD Lite ? If yes, have you tried to flash stock ROM via RSD ?
TsiaoTai said:
Hi, I don't know if you solve your problem but I have the same and I thought about using an edl cable : https://www.amazon.com/cable-Qualcomm-phones-Flash-called/dp/B01NAMYW84 to go in edl mode and then flash the ROM with QFIL. Could be worth ?
Another question; is your phone is recognized by RSD Lite ? If yes, have you tried to flash stock ROM via RSD ?
Click to expand...
Click to collapse
The cable may be worth trying. I will so thanks for telling me. I have tried a few versions of RSD Lite but my phone is not recognized.
Is yours recognized by RSD Lite?
Uio443 said:
The cable may be worth trying. I will so thanks for telling me. I have tried a few versions of RSD Lite but my phone is not recognized.
Is yours recognized by RSD Lite?
Click to expand...
Click to collapse
Nope, mine not recognized either and I tried different versions of RSD on different supports ( Windows xp, 7, 10 and Linux )
I'll buy the cable tommorow, I'll tell you
Otherwise i try to find my Bootloader unlock code to re-unlock it but no trace of this code on my PC...
By the way, in order to Blank flash your bootloader, which file did you used ? I think the BlankFlash files we used were not adapted to our phone model
TsiaoTai said:
Nope, mine not recognized either and I tried different versions of RSD on different supports ( Windows xp, 7, 10 and Linux )
I'll buy the cable tommorow, I'll tell you
Otherwise i try to find my Bootloader unlock code to re-unlock it but no trace of this code on my PC...
By the way, in order to Blank flash your bootloader, which file did you used ? I think the BlankFlash files we used were not adapted to our phone model
Click to expand...
Click to collapse
Hello,
Did you get the cable, and if so then did anything work for you?
I have ordered the cable but it will take a very long time to ship (estimated oct9-dec4).
In other words, did anything work for you?
Uio443 said:
Hello,
Did you get the cable, and if so then did anything work for you?
I have ordered the cable but it will take a very long time to ship (estimated oct9-dec4).
In other words, did anything work for you?
Click to expand...
Click to collapse
Sorry, totally forgt the topic The cable didn't work for me, I hope you will get better results.
I'm done spending hours searching answers on google, I gave up
Good luck !
TsiaoTai said:
Sorry, totally forgt the topic The cable didn't work for me, I hope you will get better results.
I'm done spending hours searching answers on google, I gave up
Good luck !
Click to expand...
Click to collapse
Damn, that really sucks. I will let you know if I am able to fix it as soon as I get the cable.
Uio443 said:
I got this moto g4 play a few months ago. I decided to finally install this security update because I decided that nothing will go wrong. I clicked install and went to eat. When I came back the screen was block and no buttons worked. I figured out that I needed to blank flash this bootloader. After 2 hours of trying it worked. I got into the bootloader. The thing is that the bootloader came locked and I cannot access my recovery or android. To unlock the bootloader I need to check the "allow oem unlock" in developper settings on android. BUT I DO NOT HAVE ANDROID. Now I'm stuck. Can anyone please help! Thanks.
(By the way it is XT1601)
Log:
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Failed to initialize partition table
CID Read Failure
Invalid CID status 0x69
USB connected
Click to expand...
Click to collapse
Flash from fastboot gpt.bin and the rest oficina firmware stock for your phone, try whith Is info
https://forum.xda-developers.com/g4-play/how-to/guide-return-to-stock-firmware-recovery-t3551797
Uio443 said:
I got this moto g4 play a few months ago. I decided to finally install this security update because I decided that nothing will go wrong. I clicked install and went to eat. When I came back the screen was block and no buttons worked. I figured out that I needed to blank flash this bootloader. After 2 hours of trying it worked. I got into the bootloader. The thing is that the bootloader came locked and I cannot access my recovery or android. To unlock the bootloader I need to check the "allow oem unlock" in developper settings on android. BUT I DO NOT HAVE ANDROID. Now I'm stuck. Can anyone please help! Thanks.
(By the way it is XT1601)
Log:
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Failed to initialize partition table
CID Read Failure
Invalid CID status 0x69
USB connected
Click to expand...
Click to collapse
Take it to your service center
I am trying to unlock my bootloader. I finally received my unlock token from OnePlus but for some reason i cant unlock the device. i have the unlock-bin file in the same folder as adb, i have usb debugging on, my device is in fastboot mode, but i keep getting this error (see attached picture). Can someone please help? Also, does unlocking the bootloader factory reset the device?
bigmikey307 said:
I am trying to unlock my bootloader. I finally received my unlock token from OnePlus but for some reason i cant unlock the device. i have the unlock-bin file in the same folder as adb, i have usb debugging on, my device is in fastboot mode, but i keep getting this error (see attached picture). Can someone please help? Also, does unlocking the bootloader factory reset the device?
Click to expand...
Click to collapse
Replace <unlock_token.bin> with the ACTUAL unlock token you got.
Yes, unlocking bootloader wipes the phone.
There are multiple forums on this.
While the phone is plugged in to the PC reboot it to fastboot again leaving it plugged in. ( Make sure you selected OEM unlock in developer options)
I managed to get it to work by using the ALL IN ONE tool
Just give the command, and drag and drop the unlockbbin. Should look like this: fastboot flash cust-unlock 23857363fbsndhdnd.bin. {for future reference, i have to reuse a couple times a week
Not unlock.bin
bigmikey307 said:
I managed to get it to work by using the ALL IN ONE tool
Click to expand...
Click to collapse
how bro can u explain ?
Same problem here
I think I've been out of the game for too long........ I was just too embarrassed to post the same question , ha! Well, at least the first part of the OP's question, about having the token in the correct path and it producing an error. If there's a step by step command by command walk-thru out there, I'd be grateful for the link. And yes I know how a search bar works, but all of the guides or whatever you want to call them seem to be missing a few steps....... Or maybe I should just go back to eating my butterscotch and yelling at kids to stay off my lawn ?
Hi everybody, I'm unable to unlock my samsung M30s even after following various methods properly, I'm able to go upto bootloader, after which I have to long press vol up button to unlock it but nothing happens at this stage, help please, thank you
Did you enable oem unluck under dev options?
treety said:
Did you enable oem unluck under dev options?
Click to expand...
Click to collapse
yes i did, still i get stuck half way thru on odin when i was trying to install twrp
So in your bootloader after pressing up(short click not long), on the upper screen does it say Oem lock = true or false?
If it says oem lock = off it sounds like you have to flash vbmeta in AP so you can flash unofficial binaries. Sorry if I can't follow your problem correctly, just trying to figure out if you just failed at some point or if something really is going wrong... This phone should unlock really easily.
Also may I ask which guide you are following?
Edit: Saw your post on the TWRP thread. So it seems your bootloader is unlocked! As long as you can boot to it you are fine, don't worry!
Get your firmware from frija, https://forum.xda-developers.com/t/tool-frija-samsung-firmware-downloader-checker.3910594/
Make sure you get the right Firmware (Look at your phones box if you still have it, CSC should be at the end of the Model number, also my Box says its a M30FZ even tho it's a M30FN).
After you're back to running firmware and still wanting to install magisk, follow santooshs TWRP thread's install guide.