Hi all,
Working with a AT&T NC1 safestrap phone. Having problems getting any custom rom to boot. Phone usually shows white on black Samsung logo for a few second then restarts, sometimes into stock recovery.
Detailed below is my method, and methods tried with same result. Perhaps someone can see the error of my ways.
I have been trying to start fresh.... so:
1) Odin I337UCUFNB1_TWRootable_Full_Odin.tar.md5
2) Do not boot, Download mode and flash 2400258.zip
3) Install tr, and SS 3.72
4) Reboot into recovery, install Hyperdrive 18.1 or Gravitron S4 3.2 for SS, then flash SuperUser then NC1 module.
No matter what, I cannot get a rom to boot. Just hangs at Samsung logo
Other methods tried:
1) Using I337_NB1toNC1_KeepRoot_OTA.zip and/or I337_NB1toNC1_KeepRoot_OTAwBL.zip to flash to NC1 before custom rom (after Odin NB1) (instead of 2400258.zip)
2) Using NB1 Odin Files from Magic Tool BL,AP,CP before flash of custom rom, tried also after flashing custom rom
3) flashing NB1 stock kernel
4) flashing NC1 stock kernel
Tried maybe 30 or 40 times, cannot get a custom Rom to boot. To be clear, stock boots just fine whenever i Odin back and upgrade to NC1.
Anyone out there insightful enough to lend a hand? More detailed instructions than on INDEX ALL THINGS POST? See my mistake? Losing my mind just a little bit, flashing the days away...
Any help greatly appreciated!
Are you trying to flash a custom ROM in the STOCK slot? Or a second slot?
I do NOT have safestrap but I know I have read you HAVE TO flash Roms in the STOCK Slot for it to work.
RockRatt said:
Are you trying to flash a custom ROM in the STOCK slot? Or a second slot?
I do NOT have safestrap but I know I have read you HAVE TO flash Roms in the STOCK Slot for it to work.
Click to expand...
Click to collapse
Always stock.
ajoh99 said:
Always stock.
Click to expand...
Click to collapse
Is your ROM SafeStrap Compatible?
Yes indeed. Tried a variety of them off the safe strap compatible page. I feel there is something I am missing but not sure what. I have been wiping data, davliche, cache, and system each time. Is this correct?
EDIT: I have successfully installed the Alliance ROM. Here's how i did it.
Prerequisites:
Your phone at at least 50% battery
A charge cable
MicroSD card that you can plug into your computer
Odin 3.09
SafeStrap, version 3.75 APK on your MicroSD card
Alliance ROM on your MicroSD card
NCG tar.md5 (the big file, not the kernel)
I started off on a rooted 5.0 VZW Galaxy S5. After some confusion, I downgraded to NCG (4.4.2) using Odin. After doing that, I went to Towelroot, got the APK, rooted, downloaded SuperSU from the play store (I had to sign into google at this point), installed it's binaries (NORMALLY! Don't choose the TWRP method), rebooted when it asked me to. From there, I installed BusyBox from the play store and installed it within the app. Then I installed Safestrap (version 3.75), which I had on my MicroSD card. I used the app My Files to navigate to my MicroSD and installed the APK. Then I installed it within the app, and when the "reboot to recovery" button worked, I rebooted into SafeStrap recovery mode. At this point, the Alliance ROM zip file should ALREADY BE ON YOUR MICROSD CARD, WHICH SHOULD BE IN YOUR PHONE. Now, you're going to press the INSTALL button to the top right in Safestrap recovery, and you're going to navigate to your MicroSD card. It might be already opened to that. Then you're gonna select the Alliance ROM and flash it. After it successfully flashes, reboot into download mode (if for some reason you aren't able to do it immediately, you get into download mode by holding volume down, home button, and power button at the same time). Now, using Odin, you're gonna flash the firmware that the instructions in the Alliance thread tells you to (here's the thread: http://forum.xda-developers.com/ver.../rom-alliancerom-build-3-rom-control-t2818632). If everything works, it's gonna take a couple of minutes, optimize apps, and boot.
Huge thanks to Beans and his team for creating the Alliance mod, and huge thanks to Tulsadiver for helping me get through the process during my confusion.
Original thread below
Hi. I'll cut to the chase. I was an idiot and thought I could just flash the Alliance ROM from my SD card, but my phone is currently a factory restored 5.0. So, after unsuccessfully flashing Alliance ROM, I thought, well, I probably need to be on 4.4.2 to do this. So, what I'm wondering is, do I need to go back down to 4.4.2 to install Alliance ROM? And do I need Safestrap recovery to do it, or can I do it from stock recovery (home button+volUp+Power)? I did a lot of digging in the Alliance ROM post and there were no posts regarding my problem/question, probably because they're all experienced and I'm not (this is my first time trying to flash a custom ROM).
It SOUNDS like I need to flash a full stock tar using Odin, is that correct? Once I do that, I would be on stock wiped 4.4.2, I assume. From there, could I flash the Alliance ROM and continue with the instructions? Or do I need to root first and get safestrap and all that crap? I feel like Beans was really vague with his instructions on installing ROMs, but whatever. Please help though, I'm kind of stuck in the middle of this with a softbricked phone.
Thank you so much in advance, I appreciate it.
~isra
EDIT: Also, I was on ROOTED 5.0 Lollipop just before this. I just got so sick of lollipop, I was ready for something different. So here we are. To confirm, my phone is the standard retail SM-G900VZW model.
EDIT2: Apparently App Ops and SuperSU survived the wipe and, after downloading Root Checker, I can confirm that I'm still rooted... Huh.
israphial said:
Hi. I'll cut to the chase. I was an idiot and thought I could just flash the Alliance ROM from my SD card, but my phone is currently a factory restored 5.0. So, after unsuccessfully flashing Alliance ROM, I thought, well, I probably need to be on 4.4.2 to do this. So, what I'm wondering is, do I need to go back down to 4.4.2 to install Alliance ROM? And do I need Safestrap recovery to do it, or can I do it from stock recovery (home button+volUp+Power)? I did a lot of digging in the Alliance ROM post and there were no posts regarding my problem/question, probably because they're all experienced and I'm not (this is my first time trying to flash a custom ROM).
It SOUNDS like I need to flash a full stock tar using Odin, is that correct? Once I do that, I would be on stock wiped 4.4.2, I assume. From there, could I flash the Alliance ROM and continue with the instructions? Or do I need to root first and get safestrap and all that crap? I feel like Beans was really vague with his instructions on installing ROMs, but whatever. Please help though, I'm kind of stuck in the middle of this with a softbricked phone.
Thank you so much in advance, I appreciate it.
~isra
EDIT: Also, I was on ROOTED 5.0 Lollipop just before this. I just got so sick of lollipop, I was ready for something different. So here we are. To confirm, my phone is the standard retail SM-G900VZW model.
EDIT2: Apparently App Ops and SuperSU survived the wipe and, after downloading Root Checker, I can confirm that I'm still rooted... Huh.
Click to expand...
Click to collapse
Download busybox from play store. Install it. Install safestrap. Once recovery is installed, go into recovery, install alliance, from within safestrap, boot into download mode and flash the full firmware Odin tar.
Tulsadiver said:
Download busybox from play store. Install it. Install safestrap. Once recovery is installed, go into recovery, install alliance, from within safestrap, boot into download mode and flash the full firmware Odin tar.
Click to expand...
Click to collapse
Wait, so I don't need to downgrade my phone? Keep in mind I'm on stock rooted 5.0, which just got factory reset so I got nothing except for the root. Also, what full firmware odin tar are you referring to? NE9? This one: https://www.androidfilehost.com/?fid=23610159112652201
Or this one: https://www.androidfilehost.com/?fid=23622183712472727
I'm getting these links from here: http://forum.xda-developers.com/ver...ment/stock-collection-kernels-modems-t2842069
I really appreciate you replying. Thank you.
The first one. That firmware will downgrade you to NE9.
Tulsadiver said:
The first one. That firmware will downgrade you to NE9.
Click to expand...
Click to collapse
Ok, so I don't need to downgrade to install the ROM. Got it. Thank you. Is there anything else I should know?
Not that I know of. ROM installations are different so always refer to their installation instructions. Some will say to flash the firmware first. The op knows best. Alliance NE9 says to do a full wipe (everything but SD card). Install the ROM, reboot to download mode ( don't hit reboot system). Once in download mode, flash the firmware tar and let your phone reboot.
Tulsadiver said:
Not that I know of. ROM installations are different so always refer to their installation instructions. Some will say to flash the firmware first. The op knows best. Alliance NE9 says to do a full wipe (everything but SD card). Install the ROM, reboot to download mode ( don't hit reboot system). Once in download mode, flash the firmware tar and let your phone reboot.
Click to expand...
Click to collapse
So, I installed Safestrap and did all that, but when I press the reboot into recovery button, it just reboots the phone normally. It doesn't go into safestrap recovery. Am I supposed to hold some buttons or something?
Did safestrap ask for SuperSU permissions? Did you install busy box? You can't just download the app.
Tulsadiver said:
Did safestrap ask for SuperSU permissions? Did you install busy box? You can't just download the app.
Click to expand...
Click to collapse
Yes, I've installed BusyBox and given SS root permissions. I installed the APK 3.75 Safestrap that I used to get into SS recovery when I was getting to rooted 5.0 a while back, so I know that the APK isn't corrupt or anything like that.
I forgot. You are on lollipop. You need to flash the NE9 kernel first ( via Odin). You already have safestrap but it doesn't work on lollipop. After you flash the NE9 kernel you will have the option to boot into recovery. Have alliance on your SD card ready to install.
Tulsadiver said:
I forgot. You are on lollipop. You need to flash the NE9 kernel first ( via Odin). You already have safestrap but it doesn't work on lollipop. After you flash the NE9 kernel you will have the option to boot into recovery. Have alliance on your SD card ready to install.
Click to expand...
Click to collapse
Found a "NE9 Stock tar.md5". Does that sound right? DL is here: https://www.androidfilehost.com/?fid=23578570567721275
Found a "NE9 Stock tar.md5". Does that sound right? DL is here: https://www.androidfilehost.com/?fid=23578570567721275
israphial said:
Found a "NE9 Stock tar.md5". Does that sound right? DL is here: https://www.androidfilehost.com/?fid=23578570567721275
Click to expand...
Click to collapse
That is it.
Tulsadiver said:
That is it.
Click to expand...
Click to collapse
Thank you. I'm going to flash the kernel then, then I'll get back to you if anything comes up. Again, I really appreciate you helping me. Thank you.
Tulsadiver said:
That is it.
Click to expand...
Click to collapse
It booted into stock recovery mode after odin successfully flashed NE9. Now do I install the ROM from stock recovery, or do I boot the phone and get to Safestrap to install the ROM from Safestrap recovery? I am currently in recovery mode.
You must not have had safestrap on your phone after all. Can you get back to download mode? You probably need to flash your lollipop kernel to get back to lollipop.
Tulsadiver said:
You must not have had safestrap on your phone after all. Can you get back to download mode? You probably need to flash your lollipop kernel to get back to lollipop.
Click to expand...
Click to collapse
I definitely had safestrap. Though, here's something: Everyone talks about a menu that pops up during boot that allows you to enter either safestrap recovery, or boot, and I've never had/seen that menu, even when I was rooting 5.0. Yes, my BusyBox worked and was properly installed, and yes, I had Safestrap recovery installed.
I just tried rebooting and it after sitting at the first screen for a while, it rebooted quickly and went back into recovery mode. What if I try installing Alliance from recovery mode? Will it work?
israphial said:
I definitely had safestrap. Though, here's something: Everyone talks about a menu that pops up during boot that allows you to enter either safestrap recovery, or boot, and I've never had/seen that menu, even when I was rooting 5.0. Yes, my BusyBox worked and was properly installed, and yes, I had Safestrap recovery installed.
I just tried rebooting and it after sitting at the first screen for a while, it rebooted quickly and went back into recovery mode. What if I try installing Alliance from recovery mode? Will it work?
Click to expand...
Click to collapse
I've never been on stock recovery before. I think it has to be a custom recovery. You might need to pull your battery and let it set for a bit and see if you can get into download mode.
Tulsadiver said:
I've never been on stock recovery before. I think it has to be a custom recovery. You might need to pull your battery and let it set for a bit and see if you can get into download mode.
Click to expand...
Click to collapse
I can get into download mode perfectly fine. I'm going to kernel back to 5.0 then...
But what do I do now? Should I downgrade to 4.4.2 with the stock firmware once I successfully boot 5.0?
EDIT: Yup, booted 5.0 perfectly fine. Now what? Downgrade to 4.4.2 and flash the NE9 Kernel?
Proof that Safestrap is on my phone:
http://imgur.com/cGa1v1n
Hey guys i followed this youtube guide for rooting 5.1.1 using TWRP Method https://www.youtube.com/watch?v=qpsGX_Xoxcg
i downloaded all the files but the firmware (not listen i have n910W8 = telus)
I have odin, supersu, TWRP (which n910w8 is listed) and samsung drivers.
I moved superSU and the TWRP file to root directory of note 4 5.1.1. rebooted into download mode, saw the blue indicator on odin and loaded the file. Rebooted holding volume up this time and tried to load the kernal but it doesnt exist.
I think im confused the TWRP file is NOT the kernal? Where can I get a kernal for n910W8 (telus)
thanks in advance!!
So I found this
http://www.sammobile.com/firmwares/download/56498/N910W8VLU1COI4_N910W8OYA1COI4_TLS/
which is telus 5.1.1 Rom. ill move this to my root directory and load the 910W8 TWRP file in odin and flash? Ill give it a try now wish me luck lol
ok i followed a guide online and now my phone just keeps restarting. I think im in big trouble. Im able to load openrecovery-twrp-2.8.1.0-trltecan.img into odin and boot to TWRP but now i cant load kernels? looked so easy to do now im down a phone? any help is much appreciated thanks!!!
You need to odin (bell, rogers, telus) 5.1.1 then odin TWRP then twrp a custom kernel. Our 5.1.1 needs a custom kernel in order to work rooted. Or.....you can load a custom 5.1.1 rooted rom that is W8 compatible or any Tmobile rom such as Tekxodus which i am running.
ok so i loaded openrecovery-twrp-2.8.1.0-trltecan.img in AP (for my device) copied the custom rom
" cm-12.1-20150423-NIGHTLY-trltetmo" which was suppose to work with my 910w8 (910T) used recovery to flash it and also supersu it flashed OK... I restart and i see a little blue guy and its stuck optimizing apps. Suck in restart loop.
what did i do wrong? try a different kernel ?
thanks in advance
EDIT 1
im trying the " Tekxodus" rom. this file is way larger whats going on with that. Is it the same procedure to flash it?
EDIT 2
Flashed to tekxodus rom optimizing apps... now its stuck System UI has stopped. and I cant do nothing. Any suggestions? ?? ?
EDIT 3
Do I need to flash a certain BootLoader along with the recovery for my device (BL and AP) ? , reboot in recovery and flash the custom rom ie "Tekxodus" ?
found this guide for 910C
http://www.ibtimes.co.uk/how-root-galaxy-note-4-n910c-android-5-1-1-lollipop-1518168 with these steps
"Step-1: Download the flashable root package and transfer it to the storage of the phone
Step-2: Download Android 5.0.1 bootloader package. Extract it using any extracting tool and you should find a folder containing Odin flashable tar package and Odin binaries"
so confused lol
All you have to do is Odin stock 5.1.1 rom (COI4 i believe) then Odin TWRP then flash Tekxodus V3.2. Let everything optimize and let it sit there for a good 10 mins after optimization. Ignore what its doing. It will just work. No need to flash anything else unless you want Xposed, then you flash that right after flashing Tek (do not boot in between)
any idea where to get a custom kernel for 910w8 5.1.1 to root stock rom?
Im running this rom (flashed using odin)
http://www.sammobile.com/firmwares/download/56498/N910W8VLU1COI4_N910W8OYA1COI4_TLS/
stock telus rom. I loaded this rom by clicking BL in odin and selecting it (along with my recovery for telus 910w8). This was the only was to get my phone back into working order.
______-
I loaded my recovery for telus into odin and went to download mode.
booted into TWRP
Flashed Tekxodus V3.2.
Optimized apps for about 10 minutes and it just restarted and optimized again and again.
One time it said System UI has stopped and I was hooped.
not sure where I went wrong?
thanks for the response btw I really want to get this going cheers
equlizer said:
You need to odin (bell, rogers, telus) 5.1.1 then odin TWRP then twrp a custom kernel. Our 5.1.1 needs a custom kernel in order to work rooted. Or.....you can load a custom 5.1.1 rooted rom that is W8 compatible or any Tmobile rom such as Tekxodus which i am running.
Click to expand...
Click to collapse
can i use any carrier software for the COI4? That's my only question. Thanks for helping!!
have rooted s5 on 4.4.4 nk2. Have been trying to install custom roms via safestrap. Apparently i am missing a step. I wipe data, try to install twi5ted Lollipop on custom rom slot....blank screen for over 30 min after reboot, phone gets real hot, take battery out. Try to install on stock rom slot, reboot then get stuck in boot loop and keeps booting into system recovery. I then saw through my hours of searching to format instead of wipe....so i format then try to install, get stuck again, take battery out, get back to safestrap dash now when i try to wipe/format/or even restore my backup it says unable to mount system. When i click reboot system it says no OS installed. After reboot, my custom slot gets erased.
I was about to try an odin flash back to stock but some how was able to get my phone back to a system restore. Why can i not get anything installed? Do i have to have odin to do a custom rom install?????? i know every rom is different but wtf. I have seen multiple videos and threads of people flashing zip via safestrap and rebooting into new rom without flashing kernals via odin or safestrap after rom install.
Also...my phone will not let me download zip files (ex. cm12.1) says unable to create download folder....how close to F'in my phone up am i? I have successfully rooted all phones in the past...s5 is giving me hell!
I just tried installing rom after format, then flash nk2 kernel from odin, still gives boot loop....ive tried everything i have found..never this much problem with custom rom..
When you try to install twisted it needs lollipop firmware which is flashed on odin, and based on your statement it says you're on NK2, a kitkat firmware. Try flashing a stock ncg tar and rerouting, downloading apps, etc. on the phone to see if that works. Also, I noticed you mentioned a cm 12.1 zip not downloading which, while unrelated to your current problem, will cause a bootloop when flashed due to the locked bootloader on the S5, so it isn't a smart idea to even attempt an install.
mrjiggywiggy said:
When you try to install twisted it needs lollipop firmware which is flashed on odin, and based on your statement it says you're on NK2, a kitkat firmware. Try flashing a stock ncg tar and rerouting, downloading apps, etc. on the phone to see if that works. Also, I noticed you mentioned a cm 12.1 zip not downloading which, while unrelated to your current problem, will cause a bootloop when flashed due to the locked bootloader on the S5, so it isn't a smart idea to even attempt an install.
Click to expand...
Click to collapse
thanks, i will try fresh from start ncg. so you have to be on the current kernel that you are flashing a rom for, whether its CM, Twi5ted, Alliance...etc i need to be on rooted 5.0 kernel then flash rom via safestrap?
i was having problems downloading from internet on phone, not downloading rom if thats what you thought i meant. I just tried installing zip for CM 12 via safestrap and got same issue. Phone reboots, goes to black screen and eventually heats up like crazy. .... I just noticed, after my restore ...again... it says safestrap disabled in red on the boot screen, why is that? it says installed and tried reinstalling.
FIXED
So i flashed ncg from odin on the messed up phone and got messed up worse. Ended up getting stuck on first boot image of samsung android s5 boot screen. Finally found original stock firmare file and used odin to complete install stock os and got rid of root. Now back to normal... luckily i figured it out my self! thanks to the 100's who viewed and didnt help and thanks to mrjiggywiggy for giving me some input to help out!
I rooted my SM-G7102 using KingoRoot App for Windows.
Later I installed Twrp recovery using Odin 3.10.7 :http://forum.xda-developers.com/galaxy-grand-2/orig-development/twrp-unofficial-twrp-recovery-t2798433
Booted into recovery, did a factory reset and tried installing Resurrection Remix: http://forum.xda-developers.com/galaxy-grand-2/orig-development/rom-resurrection-remix-m-v5-6-7-t3360391
It installed successfully I latter install 6.0 micro gapps as advised on the ROM's Page and rebooted however it just showed me Sammy BootLogo and then a blue screen and then restarted again
I later did a complete format including /data and also tried installing CM13 unofficial: http://forum.xda-developers.com/galaxy-grand-2/orig-development/cm-13-0-ms013g-cyanogenmod-13-grand-2-t3299635
however same results.
Another alter I tried was installing both ROMs mentioned above without GAPPS however it didn't work too!
Would love to recieve some help, Thanks.
[EDIT]
p.s: I was using Samsung's Stock Andorid v4.3 firmware before flashing.
Also here is my recovery log: https://gist.githubusercontent.com/ArchKudo/ab4738a2482121fde280643fc86b5ab6/raw/0cae8a800552fc331d841bd1a6798c9a41e524ec/recovery.log
[EDIT 2]
It worked! Installed 4.4.2 and re-flashed
Flash 4.4.2 firmware
Then flash custom roms
Igor2906 said:
Flash 4.4.2 firmware
Then flash custom roms
Click to expand...
Click to collapse
Thanks for the reply!
Should I use the same TWRP recovery as mentioned before?
Also is 4.3 known to cause bootloops or is there some guesswork involved?
noobno.NaN said:
Thanks for the reply!
Should I use the same TWRP recovery as mentioned before?
Also is 4.3 known to cause bootloops or is there some guesswork involved?
Click to expand...
Click to collapse
Yeah use TWRP
me2 facing same problrm but i have first install from official 4.4.2 firmeware plz help